Used Multigraf Touchline Tf-375 for sale (1,971)

Condition: ready for operation (used), SEW Eurodrive PSE311 / R / EK04 + CM71S / TF / RH1M / SM50 servo motor with gearbox, serial number SN011229434704000308, used, minor signs of wear, 100% functional, scope of supply as shown in the photos. Nedpfx Asi D N Rfoc Tocu

Condition: new, SEW Eurodrive K57 DRS71M4BE1/ASE1/TF/Z Motor SN: 01.7566848001.0001.18,unused, 100% functional, scope of delivery according to photos Ncjdpfx Ael Echwoc Teu

Condition: new, SEW Eurodrive PSF121 DS56MB/TF/AS1H/SB10 geared motor, serial number: 011287767901000109, unused, 100% functional, scope of delivery as shown in the photos. Ncjdpfji D N Rmox Ac Tou

Condition: new, Dittel Marposs WB HEAD-ST50X120 / FC NP TF 0950 / O3PL2024504 Electromagnetic expansion head for installation, serial number: O14LW1381, unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. Nodpfxji D Upyj Ac Tecu

Condition: ready for operation (used), SEW Eurodrive FH67G DT71D4BMG/TF geared motor, shaft mounting diameter: 40 mm, used, in good condition, 100% functional. Please request separate shipping costs! Nodpfx Acei D N Rbs Tocu

Condition: new, SEW Eurodrive RF77 CV132S4/BMG/TF/AS4H gear motor 01.1749781501.0001x11 / ID no. 10449459, unused, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ncodpfxsmtdwqj Ac Tou

Condition: used, power: 85 kW (115.57 HP), Year of construction: 2022, operating hours: 2,337 h, Operating hours: 2337, First registration: 05/24/2022. Year of manufacture: 2022. Operating hours approx. 2200. Max. lifting capacity: 3,300 kg. Max. lifting height: 6,600 mm. Max. outreach: 3,500 mm. Length to carriage: 4,310 mm. Width: 2,100 mm. Height: 2,120 mm. Total weight with load forks: 6,500 kg. Total weight without load forks: 6,330 kg. Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled. Power: 85 kW (115 hp). 2,300 rpm. Stage V. Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR). Hydrostatic drive. Pump: electronically controlled with variable flow rate. Motor: variable motor. EPD TOP including optional automatic speed increase. Mineral hydraulic oil HVI 46. Transmission: 2 gears, electro-hydraulically controlled. Max. speed = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h. Cab: closed cab. Split door. 360-degree all-round visibility. GRAMMER air-suspended seat with safety lap belt. ROPS/FOPS tested. Heater. Front, roof, and rear window wipers. Sun visor. 4x1 joystick, electronic with capacitive release, including direction switch. Telescopic boom, 2-piece with electronic end-of-stroke damping (Soft Stop). Carriage quick-change system, type "ZM2", hydraulically controlled from the cab. Steering: hydraulic steering. 3 steering modes: all-wheel drive, front-wheel drive, crab steering. Drive: permanent all-wheel drive. Axles: front axle fixed, rear axle oscillating. Braking system: servo-assisted disc brakes on all four drive axles, automatic parking brake when engine is stopped. Hydraulic system: Pump with variable flow rate, type "LOAD SENSING". Flow rate, working hydraulics: 125 l/min. Flow rate, hydraulic fan: 46 l/min. Total flow rate: 171 l/min. Working pressure: 210 bar. Flow-sharing control block. Electrical system: 12 V. Battery with 100 Ah. Alternator 120 A. Stabilization control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement recognition, and overload cut-off. Special equipment: Tires: 400/70-24 158A8. Rear hydraulic connection with separate control. EU approval as a tractor/agricultural tractor, 40 km/h. Trailer coupling, height-adjustable, self-locking, 30/32 mm pin, including connection for trailer lighting. Air conditioning. Vibration damping on the boom (B.S.S.). LED rotating beacon on the cab roof (approval is the responsibility of the customer!). LED work lights on the cab (2 front, 2 rear) instead of the standard halogen lights. 2 work lights at the end of the first arm (main boom). ASCS upgrade: Display with all ASCS functions + continuous flow front. Location: Gartenbau Leufgen. Njdpfsupq Tqex Ac Tjcu

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,211 h, maximum speed: 40 km/h, Operating hours: 1,211, First registration: 11.10.2022 Basic Equipment / Technical Data: - Max. lifting capacity: 4,200 kg - Max. lift height: 7,000 mm Ncjdpjtu Sztsfx Ac Tju - Max. outreach: 3,800 mm - Length to implement carrier: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine: - 4-cylinder Deutz TCD 3.6 - 3.6 l displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR-catalyst with AdBlue injection (DPF + DOC + SCR) Drive: - Hydrostatic travel drive - Pump: electronically controlled with variable output - Engine: variable displacement motor - EPD TOP incl. optional automatic rpm increase - Mineral-based hydraulic oil HVI 46 Transmission: - 2-speed, electrohydraulically controlled - Max speed: 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: - Enclosed cab - Split door - 360° all-round visibility - V3611 GRAMMER air-suspended seat with lap safety belt - ROPS/FOPS certified - Heating - Front, roof, and rear wipers - Sunblind - 4x1 electronic joystick with capacitive release incl. direction control switch - CS = hydropneumatic cab suspension Boom: - 2-piece telescopic boom with electronic end position damping, Soft Stop - Implement carrier quick coupler system type "ZM2", hydraulically controlled from the cab Steering: - Hydraulic steering - 3 steering modes: All-wheel, front-wheel, crab steer - Permanent all-wheel drive - Axles: fixed front axle, oscillating rear axle Brakes: - Power-assisted disc brakes on all four drive shafts - Parking brake automatically engages when engine is off Chassis: - High-strength steel frame construction Hydraulics: - Load Sensing variable displacement pump - Work hydraulics flow: 150 l/min - Hydraulic fan flow: 46 l/min - Total flow: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics: - 12 V - 100 Ah battery - 120 A alternator Stabilization Control: - Simplified Merlo ASCS System (ASCS-light) with fully electronic stability control, audiovisual signals, attachment recognition, and overload cut-off Tires: - 460/70 R 24 Michelin XMCL Standard Equipment: - Power brakes - Hydraulic oil cooler - Rear plate for mounting a trailer hitch - Hydraulic reversing fan - Radio prep - Work lights on cab (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Load guard on implement carrier - Road lighting - Automatic main battery switch - Electrical cable in boom - Audible reverse signal - Lift cylinder support for securing Optional Equipment: - EU approval as tractor/towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. connection for trailer lighting (for compact and medium models, height-adjustable version strongly recommended) - Air conditioning - Boom suspension (B.S.S.) - LED beacon on cab roof (approval subject to ...

Condition: used, power: 100 kW (135.96 HP), Year of construction: 2023, operating hours: 219 h, maximum speed: 40 km/h, Operating hours: 219, First registration: 16.01.2024 _____ Max. load capacity: 4,200 kg Max. lift height: 7,000 mm Max. outreach: 3,800 mm Length to attachment carrier: 4,730 mm Width: 2,310 mm Height: 2,530 mm / 2,590 mm (with CS activated) Total weight with forks: 8,170 kg Total weight without forks: 8,000 kg Engine: 4-cylinder Perkins 904J 3.6 l displacement, water-cooled Output: 100 kW (136 HP) 2,300 rpm Hydraulic reversing fan Emission Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement EPD PLUS incl., with optional automatic rpm increase Mineral-based hydraulic oil HVI 46 Transmission: 2 speeds, electrohydraulically controlled Vmax = 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: closed cab, split door, 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 electronic joystick with capacitive enable incl. direction selector switch CS = hydropneumatic cab suspension Telescopic boom: 2-section with electronic end-position dampening (Soft Stop) Quick-attach device carrier Type "ZM2" hydraulically controlled from cab Steering: hydraulic steering, 3 steering modes: all-wheel, front-wheel, crab steer Permanent all-wheel drive Axles: fixed front axle, oscillating rear axle Brake system: servo-assisted disc brakes on all four drive shafts, automatic parking brake when engine is off Frame: high-strength steel design Hydraulic system: variable displacement pump "LOAD SENSING" Working hydraulics flow: 151 l/min Hydraulic fan flow: 46 l/min Total flow rate: 197 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12 V, 100 Ah battery, 120 A alternator Stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement detection, and overload shutoff Tires: 460/70 R 24 Standard equipment: servo brake, hydraulic oil cooler, rear mounting plate for tow bar, hydraulic reversing fan, radio prep, work lights on cab (2 front, 2 rear), preinstalled function for auxiliary hydraulics at boom head, 2 hydraulic connections at boom head, load protection guard on attachment carrier, road lighting, automatic main battery disconnect, electrical cable in boom, acoustic reverse signal, lift cylinder support for safety Special equipment: EU homologation as tractor/ towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connector Air conditioning Boom suspension (B.S.S.) LED work lights on cab (2 front, 2 rear) 2 work lights at the end of the first boom section (base boom) ASCS upgrade: monitor with all ASCS functions + thumb... Nodpjpcht Hefx Ac Tocu

Condition: used, Year of construction: 2024, operating hours: 193 h, maximum speed: 40 km/h, Operating hours: 193, First registration: 15.01.2025 Basic equipment / technical data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to attachment plate: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine - Deutz TCD 3.6, 4-cylinder, 3.6 liters displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive pump: electronically controlled with variable displacement - Motor: variable displacement - EPD TOP including optional automatic rpm increase - Mineral hydraulic oil HVI 46 Transmission - 2 gears, electrohydraulic control - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360-degree all-around visibility - GRAMMER V3611 air-suspended seat with lap belt - ROPS/FOPS certified - Heater - Front, roof, and rear wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector - CS = hydropneumatic suspension for cab vibration damping Telescopic Boom - 2-piece, with electronic end-position damping (Soft Stop) Attachment carrier - Quick change system type "ZM2", hydraulically controlled from the cabin Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle rigid, rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels - Automatically applied parking brake when engine is off Chassis - High-strength steel frame construction Hydraulic System - Load Sensing variable displacement pump - Hydraulic work circuit: 150 l/min - Hydraulic fan circuit: 46 l/min - Total: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics Ncsdpfsuycgfsx Ac Tju - 12 V - 100 Ah battery - 120 A alternator Stability Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual alarm, attachment recognition, and overload shutdown Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo brake - Hydraulic oil cooler - Rear plate for towing hitch mounting - Hydraulic reversing fan - Radio pre-installation - Work lights on cabin (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Attach. protection guard on carrier - Road travel lighting - Automatic battery main switch - Electric cable inside boom - Acoustic signal when reversing - Hoist cylinder support for securing Optional Equipment - EU road approval as tractor/tow vehicle 40 km/h incl. self-locking hitch, 30/32 mm pin, trailer lighting socket - Air conditioning - Boom vibration damping (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights on the first boom section (base boom) - AS

Condition: used, Year of construction: 2025, operating hours: 122 h, Operating hours: 122, First registration: 08.10.2025 Maximum lifting capacity: 3,000 kg Maximum lifting height: 6,700 mm Maximum outreach: 3,800 mm Length to attachment carrier: 4,510 mm Width: 2,000 mm Height: 2,120 mm Total weight with forks: 6,620 kg Total weight without forks: 6,450 kg Engine: 4-cylinder Deutz TCD 2.9 2.9 L displacement, water-cooled Power: 75 kW (101 hp) 2,600 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement motor EPD PLUS including optional automatic rpm increase Mineral hydraulic oil HVI 46 Transmission: 2-speed Electrohydraulic control Vmax = 1st / 2nd gear = 16/20 km/h, optional 40 km/h Cab: Fully enclosed cabin, split door 360-degree all-round visibility Njdpfxeyv S Ufj Ac Tscu GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 joystick, electronic with capacitive release and travel direction switch Telescopic boom: 2-section with electronic end position cushioning (Soft Stop) Attachment carrier: Quick-change system type “ZM2” hydraulically controlled from the cab Steering: Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle rigid Rear axle oscillating Braking system: Servo-assisted disc brakes on all four wheels Automatic parking brake when engine is off Hydraulic system: Load-sensing pump with variable output Total flow: 100 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12V battery with 100 Ah Alternator 120A Stabilization control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off Tyres: 400/70-20, agricultural tread Standard equipment: Power brake Hydraulic oil cooler Rear plate for mounting a trailer hitch Radio preparation Work lights on cabin (2 front, 2 rear) V2001 preparation for additional function at boom head 2 hydraulic connections at boom head Load guard on attachment carrier Road lighting Automatic battery disconnect switch Electrical connection cable inside boom Audible reverse warning Lift cylinder support for safety 1 Operating manual 1 Engine manual Special equipment: EU approval as tractor/towing vehicle 40 km/h incl. height-adjustable, self-locking trailer hitch, 30/32 mm pins, trailer lighting connection Air conditioning LED work lights on cabin (2 front, 2 rear) Boom suspension (B.S.S.) Location: 54595 Prüm

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 3,300 kg, lifting height: 6,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,700 kg, total length: 4,310 mm, drive type: Diesel, construction width: 2,100 mm, Rigid telescopic forklift Mast type: Telescopic Ncedpfeyz Elhsx Ac Tou Technical condition: New Front tires size: 400/70-20 Rear tires size: 400/70-20

Year of construction: 2021, condition: as good as new (ex-display), creasing- folding machine dmsDIGITAL 375+375KF Large stacking unit 500 mm Nodpfxonfvvmo Ac Tecu Alignment section, creasing module, transfer section Folding unit with two swords double sheet diverter for non-stop operation up to 8,200 sheets/h fast

Condition: used, Year of construction: 2013, Machine design: Throughfeed Processing size in X direction: 1000 mm Processing size in Y direction: unlimited mm Processing thickness (Z dimension): 60 mm Number of main spindles: 1 unit Main spindle power: 3.3 kW Tool changer: No tool changer Rear wall groove units: fixed in Y direction Vertical drilling spindles - in X direction: 5 units Nodjx Urniepfx Ac Tocu Vertical drilling spindles - in Y direction: 5 units Spindle speed, vertical drilling spindle: 4000 rpm Horizontal drilling spindle in X direction: 2 double spindles Horizontal drilling spindle in Y direction: 1 double spindle Spindle speed, horizontal drilling spindle: 4000 rpm Monitor size: 17" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: Masterwork DXF interface: Yes Online connectivity possible: Yes CD-ROM drive: Yes Table version: fixed table with rollers Weight approx.: 1300 kg Dimensions: 2,200 x 2,470 x 1,590 mm Location: Customer site

Condition: new, SEW-EURODRIVE three-phase motor DV112M4/TF/VS 4.0 kW, new old stock. New, unused SEW-EURODRIVE three-phase motor from stock. Manufacturer: SEW-EURODRIVE Nedpfx Aezb Nxdsc Tjcu Type: DV112M4/TF/VS Condition: NOS Motor frame size: 112M Motor type: Three-phase asynchronous motor Power: 4.0 kW Frequency: 50 Hz Rated speed: 1420 min⁻¹ Voltage: 220/380 V Δ/Y Power factor cos φ: 0.82 Insulation class: 130 (B) Design: IM B3 Manufacturer's part number: 01.1763132401.0002.02 with auxiliary fan Condition: NOS

Condition: as good as new (ex-display), Year of construction: 2015, Knapp roller conveyor accumulating sorter sorting system Fastlane 11200-375-290 RA1954 Brand: Knapp Running direction: both directions Belt spacing: 290 mm Nominal/outer width (NB): 375 mm Length: 11200 mm Frame height: 105 mm /190 mm with sorter Belt width: 35 mm Number of outfeeders: 6 pcs. Number of pneumatic accumulation places: 6 pcs. Belt conveying speed: 36 m/min Accumulation and sorting length: 600 mm. Package dimensions: min. 350 mm width and max. 650 mm length (with current position of the lifters. longer also possible with adjustment) Package properties: flat bottom is recommended or no sagging of the underside Theoretical sorting speed: 2.0 Sec/sorting, 1800 sortings per hour Electrical data: SEW geared motor 0.37 kW, 380V Scope of delivery: without supports, without side guides, with drive station, with light barriers and accumulation mechanism Optionally available: Supports Side guide on one and both sides Change of total length/position Faster motor for higher throughput rates (theoretically 3200 sorts per hour) Programming for sorting process Metal sheets to avoid hanging/sagging Ncjdpovzuxfefx Ac Tju Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2019, operating hours: 7,551 h, Rigid telescopic forklift Mast type: None Ncedpfxsyfi Imj Ac Tsu

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. Ncedpfx Acewld Ups Teu The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard direction: left to right Technical Parameters 1. Product length: L120–500 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Condition: good (used), machine/vehicle number: 49889159610710, Year of construction: 2020, operating hours: 877 h, load capacity: 3,300 kg, lifting height: 6,000 mm, overall weight: 6,000 kg, enginetype: Diesel, manufacturer: Merlo Ncsdpfx Aow Ry Tdec Tsu

Condition: as good as new (ex-display), Gearbox motor, manufacturer Getriebebau Nord Type SK-80 LI4TF i = 21.28 Njdpfelrt Tuex Ac Tocu n2 65 min/1 400 Volt 0.75 kW Year of manufacture: 2011 Unused, from warehouse clearance Weight: 19.5 kg Transport dimensions: L. 480 mm W. 160 mm H. 240 mm

Condition: like new (used), Year of construction: 2024, operating hours: 7 h, functionality: fully functional, total height: 1,620 mm, total length: 1,760 mm, total width: 700 mm, type of input current: three-phase, tank capacity: 285 l, input voltage: 400 V, rotational speed (max.): 2,850 rpm, input frequency: 50 Hz, water tank capacity: 440 l, Water treatment and recycling unit for process water Z 800K HA TURBO FLOC – 2024 | Almost like new For sale, a professional water treatment and recycling unit for process water, model Z 800K HA TURBO FLOC. The system was manufactured in 2024 and has only been in operation for 7 hours, making it practically new. The unit is designed for effective treatment of process water and its subsequent reuse. Thanks to the use of a centrifuge and the Turbo-Floc flocculation system, it significantly reduces water consumption and operating costs for the plant. Technical specifications: treatment capacity up to 1200 l/h, system dimensions: 1760 × 700 × 1620 mm, centrifuge dimensions: 995 × 680 × 580 mm, drum rotation speed: 2850 rpm, RAL 7035 paint finish, Ncjdpfezcybrsx Ac Tou automatic water removal from the centrifuge during braking, polyurethane sludge basket, electromagnetic safety valve. Buffer tank (285 l): made of HDPE plastic, equipped with a Turbo-Floc system for automatic dosing of coagulant or flocculant, additional filter on the inlet of process water, two float switches controlling the liquid level, pulsed power supply by P-3 pump. Clean water tank (440 l): made of HDPE polyethylene, supplies the devices with treated process water, equipped with an efficient P9 diaphragm pump: capacity 7.8 m³/h, working pressure 4 bar, water level control. Control and monitoring system: monitoring of filling and sludge basket replacement, timer relay and light signaling (flashing lamp), PLC controller E60-420, supply voltage 400 V / 50 Hz, control voltage 24 V DC, protection class IP54, operating temperature from +5°C to +40°C, safety feature that prevents the centrifuge from starting unless the cover is opened and closed beforehand. Additional equipment: DP1 dosing pump for coagulant supply, dosing capacity 0–1 l/h, Turbo-Floc flocculation mixer with mixing blades on both sides of the diagonal, special conical guide plates made of stainless steel, mounted inside the centrifuge. The unit is in excellent technical and visual condition. It is an ideal solution for industrial plants using vibration treatment, where effective water treatment and reuse are required. Year of manufacture: 2024 Operating hours: 7 We invite you to contact us for more information and to arrange a demonstration of the unit.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 400 h, load capacity: 4,500 kg, lifting height: 10,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 10,300 kg, total length: 5,040 mm, drive type: Diesel, construction width: 2,350 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Ncedpfsxfm Nyox Ac Tju Front tires size: 500/70 r 24 michelin xcml Rear tires size: 500/70 r 24 michelin xcml

Condition: used, Item: D4313-Alfa Exchanger Alfa Laval Plate heat exchanger, Type MF6-TF II Ncjdeviu Atjpfx Ac Tsu Volume 7.8 L Max. Working temperature 135 C Working pressure 5 bar

Condition: excellent (used), Year of construction: 2002, Tampoflex TF 150 E tampon printing machine cliché board: 400x250mm tampoprint control voltage: 230v 50Hz air: 4-6 bar machine dimensions: 1200x1600x600 Ncodpfx Aoh Rv Sijc Tju weight: 240 kg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: V1 01HOHS300KET5ESGR0SZ580, warranty duration: 12 months, The machine is usually always in stock. Short delivery times are possible. System Features 1. 2.5-meter-long chain conveyor (other lengths available upon request) 2. Adjustable bag former 3. Double film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Solid center fin seal structure 6. Four servo-controlled drives - Active material feed shaft Ncedpfx Aceq Ikgko Tou - Center seal - End seal - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in local language 11. Print mark control 12. Programmable bag length 13. Standard travel direction: left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 500 mm 6. Supply voltage: 1-phase 220V 50Hz 7. Total power: approx. 7.5 kW 8. Machine weight: approx. 450 kg 9. Machine dimensions: approx. 4250 x 990 x 1650 mm