Used Niles Rf 7 for sale (27,624)

Condition: used, mileage: 123,741 km, power: 129 kW (175.39 HP), first registration: 01/2018, fuel type: diesel, overall weight: 7,490 kg, color: blue, gearing type: automatic, emission class: euro6, number of seats: 3, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,070 mm, loading space width: 2,490 mm, loading space height: 2,450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Subject to errors and prior sale! Internal number: 1440. DZ07632 ---- EQUIPMENT - Additional tank 70l, steel - Digital tachograph - Airbag, passenger/driver - Driver comfort suspension seat - Automatic climate control - Rear view mirror, heated - Reversing alarm - Weight variant 9.5 tonnes (4.1/5.9) - Body by Junge - LBW tail lift Sörensen 1000kg - Bluetooth radio - Automatic transmission ... and much more ---- The vehicle is unprocessed! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Bedpfx Adjhgfyfo Aewl Financing/leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: new, mileage: 300 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, emission class: euro6, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, * Mercedes Sprinter 517 Low-floor * Immediately available Bwedey D U Siepfx Ad Ajl * 15 seats * 27 standing places * 1 wheelchair space * Perm. gross weight 7000KG * Wheelchair space * Automatic transmission * Cruise control * Multifunction steering wheel * Driver's air conditioning * Driver's air suspension seat * Webasto roof air conditioning * Ventilation system * Passenger compartment convector heating * LED lighting, white and blue * USB charging stations in passenger area * Grab rails * Stop buttons * Wheelchair ramp * Reversing camera * Anti-slip floor * Electric swing doors * Folding seats * Assistance systems * Destination display pre-installation * Roof hatch * Financing available * Trade-in possible * Sale subject to prior sale, errors, and change

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Bwjdpfxsmx Sl To Ad Asl Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline

Year of construction: 2005, condition: good (used), I sell the double mitre saw OMGA TRF 527, year 2005. Cutting length 390 - 2800mm Cutting width max. 170mm Bsdsg Tumcepfx Ad Ajwl Cutting height max. 90mm Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Condition: used, We are offering used order picking trolleys for sale. TECHNICAL DATA Height: 1,800 mm Width: 1,270 mm Depth: 470 mm Number of shelves: 3 pcs + garment rail 2 push handles 4 swivel castors with directional wheel with side step Pre-assembled Condition: used PRICE €140.00 net €166.60 gross incl. VAT Available quantity: 439 units Tiered pricing (per unit) 1 - 5 units: €130.00 net 6 - 10 units: €123.50 net 11 - 25 units: €117.00 net 26 - 50 units: €110.50 net 51 - 100 units: €104.00 net from 101 units: €97.50 net YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We will gladly assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at extra cost. Additional costs depend on the delivery location and shipment size, and can be provided on request. PROJECT PLANNING Our sales team will be pleased to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. TERMS OF PAYMENT Payment terms will be agreed upon when an order is placed. The price is indicated per unit/net price or as stated in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. Bedpfx Adey Eqnms Aewl ABOUT US DLK, located in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses as well as machinery for commerce, industry, and trades. We continuously offer attractive used equipment from various brands and manufacturers at favorable conditions. If you have any questions, please do not hesitate to contact us. Four ways to win – The success factors of DLK: Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, DOUBLE GLASS BEADING SAW TRF 527 NC FP CA MM.4000 (according to nameplate) Bsdpfxoy Er Ike Ad Aowl Double mitre saw for simultaneous cutting of two superimposed glass beads. Right saw unit is fixed; Adjustment of the left unit is based on the set cutting length, which can be read from a digital display. Units are equipped with supports that enable simultaneous cutting of 2 glass beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process is completed, the pneumatic clamping cylinders automatically swivel to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital measurement display • Pressure monitor • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release and motor protection switch • Pressure monitor • Tool kit • Safety covers with horizontal, swiveling clamping devices • Two-hand control • Belt drive • Pneumatic unit lift • Central support TECHNICAL DATA • Motor output 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 4000 mm • Min. cutting length 158 mm • Weight approx. 290 kg • Space requirement (standard equipment) approx. 4,500 x 1,000 mm 1 set of 2 mechanical stops for setting up to 4 intermediate angles. Additional central support. 1 set of adjustments for rebated profiles 1 set of adjustments for rebated profiles according to drawing: - Adapter on the clamping devices to compensate for profile inclination - Shims on the rear stops of the units and the central piece. The sketch below (in green) shows a beveled presser following the inclined profile and pressing it against the (red) shim on the stop. Details provided without guarantee.

Condition: good (used), mileage: 415,452 km, power: 552 kW (750.51 HP), first registration: 04/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 3,400 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2020, Equipment: AdBlue, air conditioning, cruise control, electric window regulation, fridge, onboard computer, retarder, spoiler, = Additional options and equipment = - Work lights rear - Work lights front - Roof spoiler Bwodjy Da H Sspfx Ad Asl - Enclosed cab - Side skirts - Sun visor - Pre-heating automatic system - Central lubrication = Notes = Volvo FH16.750 Globetrotter 6x2 - Retarder - Full air - Hub reduction - Work remote MY: 22-4-2020 KM: 415,452 YV2R0P0C1LA859760 Retarder Full air suspension 3.40 m wheelbase Hub reduction Fridge = Further information = Technical data Number of cylinders: 6 Transmission Transmission: I-Shift, 12 speeds, automatic Axle configuration Suspension: air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steering axle; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Tire size: 295/80R22.5; Twin tires; Max. axle load: 13,000 kg; Tire tread left inside: 60%; Tire tread left outside: 60%; Tire tread right inside: 60%; Tire tread right outside: 60%; Reduction: Outer planetary axles Rear axle 2: Tire size: 295/80R22.5; Twin tires; Lift axle; Max. axle load: 7,500 kg; Tire tread left inside: 50%; Tire tread left outside: 50%; Tire tread right inside: 50%; Tire tread right outside: 50% Weights Curb weight: 9,675 kg Payload: 19,825 kg Gross vehicle weight: 29,500 kg Condition Technical condition: good Visual condition: good

Condition: used, mileage: 68,947 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: automatic, first registration: 11/2022, fuel consumption (urban): 5.5 l/100km, fuel consumption (extra-urban): 5.5 l/100km, fuel consumption (combined): 5.5 l/100km, CO₂ emissions: 144 g/km, emission class: euro6, color: grey, suspension: steel, number of seats: 5, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, E07 Hill-start assist, E2X MBUX multimedia system with DAB, FC5 heat-insulating windshield, H06 air conditioning, FR8 reversing camera, EY5 Mercedes-Benz emergency call system, SD1 i-Size child seat anchorage, EY6 breakdown management, B25 electric parking brake, CM0 painted bumper, FK3 chrome radiator grille, JK5 instrument cluster with color display, V23 upgraded interior trim, Z1M registration type M1, W46 sliding door windows, IA0 axle configuration 4x2, MA2 speed limit assistant, EZ5 parking package, XO7 Mercedes-Benz Mobilo with DSB and GgD, T70 child safety locks on passenger compartment doors, T78 sliding door track cover in body color, E1D digital radio (DAB), Y10 first-aid kit, MJ8 ECO start-stop function, ES1 12V socket in passenger compartment, RD9 tires without specified brand, H00 warm-air duct to passenger compartment, MS1 cruise control, HI2 climate zone 2 (temperate), FE3 electric front windows with comfort function, W65 tailgate, C6L multifunction steering wheel, RM7 summer tires, HZ0 electric auxiliary heater, F4W windshield washer reservoir with increased capacity, L12 halogen headlights, XZ0 model generation 0, G7A 7-speed automatic transmission, V56 carpet in trunk, V55 passenger compartment carpet, V57 luggage compartment cover, W78 rear window with wiper and washer system, T17 right-hand sliding door with window, X0T weight variant 2,199 kg, H20 all-round heat-insulating glass, I44 16" steel wheels, VF9 ARTICO center armrest & NEOTEX front door panels, H22 heated rear window, JW8 ATTENTION ASSIST, IM1 wheelbase 2,716 mm, FG1 armrest. We would be pleased to provide you with an individual financing or leasing offer and will gladly take your used vehicle in trade. We look forward to welcoming you to our dealership for further consultation. Vehicle condition in accordance with age/mileage; partial repainting has been performed during vehicle reconditioning. No liability for printing or typographical errors. Subject to change and prior sale ... more on our homepage. Bodpfx Adex E Nzzo Aewl

Condition: used, mileage: 5,970 km, power: 129 kW (175.39 HP), first registration: 05/2024, fuel type: diesel, empty load weight: 3,655 kg, maximum load weight: 3,835 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 5,700 mm, loading space length: 3,500 mm, operating hours: 90 h, Equipment: ABS, air conditioning, central locking, differential lock, hydraulics, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, - Fuso 7C18 City hooklift available in approx. 6 weeks, chassis already on site - Chassis currently in white, repainting at an attractive fixed Fuso rate possible - Mitsubishi Canter Fuso 7C18 City hooklift - City hooklift with 6t lifting capacity, for containers up to 3.5m - Articulated arm for a shallow loading angle - Hydraulic locking system - Paintwork e.g. in yellow-green RAL 6018 or any desired RAL colour - Operation from the cab, control unit wired and mounted on the A-pillar - Mounting brackets hot-dip galvanized and powder-coated in black - Double side underrun protection, anodized and powder-coated in vehicle colour - Reinforced plastic mudguards with aluminium chequer plate - High-performance LED side marker lights - Protective plate for tail lights - Air conditioning Bwjdpfxsy Dghis Ad Asl - Differential lock - Comfort seat - 1x storage box behind the cab, hot-dip galvanized and powder-coated in desired colour - Total weight: 7490 kg, unladen weight: 3790 kg, payload: 3700 kg - Wheelbase: 3400 mm - Continental M+S tires - Rear-view camera, beacons, spade holder optional - Subject to errors and prior sale! - More information and additional XXL photos on our homepage - For inquiries in English please call ... Automatic climate control, automatic gearbox, VAT deductible, ASR, ABS, service history, radio, on-board computer, heated mirrors, electronic immobilizer, central locking with remote control, trailer coupling, fog lights, power steering, rev counter, differential lock, tinted windows, tachograph, cab: short-distance, air-suspended driver’s seat, electric windows, PTO, one owner, emissions standard: Euro 6, diesel, rear-wheel drive, excellent condition, HSN 7149, hydraulics, particulate filter, new MOT/emissions inspection before sale, available for rental, particulate matter sticker: 4 - green

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN Bwsdpfjvu E R Ssx Ad Ajl feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: good (used), machine/vehicle number: 3383, Year of construction: 2011, load capacity: 45,000 kg, lifting height: 15,800 mm, mast type: telescopic, total length: 14,100 mm, total width: 4,180 mm, operation weight: 91,800 kg, additional equipment features: Weight system, Centralized greasing system, Automatic Greasing System for spreader and inner boom, Hydraulic sliding cabin, Dual tread, Equipment: lighting, Kalmar DRF450-75S6XS from Uniktruck Wheel type – Drive wheel: Pneumatic Bwjdpfoyuidtox Ad Aol Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 18.00-33 Wheel size – Steering wheel: 18.00-33

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Bwjdpfx Ajxnlgced Ajl

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, feed length X-axis: 750 mm, feed length Y-axis: 600 mm, feed length Z-axis: 400 mm, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, rotational speed (max.): 42,000 rpm, overall weight: 5,500 kg, spindle speed (max.): 42,000 rpm, spindle motor power: 7,500 W, Röders RFM 750 – a reliable partner for your production requirements. This used 3-axis graphite machining center from 2001 impresses with its solid construction and precision. Details Year: 2001 Includes graphite extraction Accessories WITHOUT accessories such as tools, holders, zero-point clamping system, or clamping plates. Technical data Bjdpfxjy Dr Are Ad Ajwl Travel X/Y/Z: 750/600/400 mm Spindle speed: up to 42,000 rpm Spindle power: 7.5 kW Machine weight: approx. 5,500 kg Dimensions: 3,000 x 2,500 x 2,800 mm

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - Infeed width: 740mm - Infeed height: 300mm - Shaft width: 780mm - Shaft diameter: 1000mm - Knife length: 780mm Bwjdpfjyk Hfasx Ad Aol - Number of knives: 2 pcs - Screen dimensions: 55x55mm - Bottom: 4 toothed feed rollers - Lower shaft motor: 5.5kW - Top: 3 toothed feed rollers - Upper shaft motor: 5.5kW - Belt conveyor feeder - Length of belt feeder: 4300mm - Width of belt feeder: 600mm - Feeder belt drive motor: 2.2kW - Main motor: 90kW - Reverse - Autoreverse - Overall machine dimensions (L/W/H): 4600x2350x1700mm - Overall feeder dimensions (L/W/H): 4550x980x970mm - Total weight: approx. 11,000kg – German-made – Autoreverse (adjustable) – Used shredder, in very good condition Net price: 265,900 PLN Net price: 63,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major currency fluctuations, the price may change)

Condition: used, Year of construction: 1999, turning diameter 270 mm turning length 630 mm Bwedpfx Ajx Avp Rsd Asl control SIN840D swing over bed 400 mm swing diameter over slide rest 220 mm longitudinal slide -travel 745 mm cross slide - travel 200 mm turning speeds 10 - 4.000 U/min power capacity at 100 % load 15,00 kW spindle head DIN 55026 - Size 6 spindle bore 62 mm chucking diameter max. 315 mm feed x-axis 1 - 12.000 mm/min rapid traverse X-axis 12,00 m/min Feed z- axis 1 - 20.000 mm / min. rapid traverse Z-axis 20,00 m/min tailstock quill taper MT 3 quill stroke 112 mm quill pressure 10,00 kN tool taper DIN 69880 Ø 30 mm Tool drive speed max. 4.000 1/min total power requirement 37,00 kW weight of the machine ca. 4,00 t dimensions of the machine ca. 4,00 x 2,75 x 2,30 m With SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool holders.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Bedpfjy Avg Eex Ad Aewl Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications • Garment production cutting rooms • Workwear and denim production • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity

Condition: refurbished (used), Year of construction: 2017, Vutek H2000 UV Hybrid Printer fully refurbished with 3-month warranty Colors: 6C CMYL LCLM, 2 White Bedpfx Asyzg Tysd Aswl Resolution: 1000 dpi with 7pl Ultradrop Print width: 205 cm, print height: 5 cm Speed up to 90 m²/h

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: FC24DE9128, type of input current: three-phase, total width: 2,800 mm, total length: 1,800 mm, input voltage: 400 V, input current: 32 A, working width: 1,800 mm, total height: 1,800 mm, repeat accuracy: 0.1 mm, feed rate Z-axis: 100 m/min, cutting width (max.): 1,800 mm, cutting height (max.): 25 mm, compressed air connection: 6 bar, For sale is a high-end Lectra Vectorfashion automatic CNC fabric cutting system, model VT-FA-Q2-72. This system represents modern industrial cutting technology and has been taken into use at the beginning of 2025. The system has been used in professional garment production and is designed for high-volume, precision cutting with full CAD/CAM integration. It is a complete large-format cutting solution including vacuum table, automated cutting head and computerized control system. The machine is fully operational and has been recorded in production use on 05.03.2026. Originally purchased new for approximately 125,000 EUR. Technical Details • Manufacturer: Lectra • Model: Vectorfashion VT-FA-Q2-72 • Type: Automatic CNC fabric cutting system • Year: 2024/12 • Control: Computerized CNC system (VectorControl environment) • Cutting type: High-speed knife cutter • Vacuum cutting table with hold-down system • Multi-layer cutting capability • Industrial servo motors • Full CAD/CAM compatibility Electrical & Connections • Type of input current: 3-phase (3-Phase + Neutral + Earth) Bwedpfx Adey Akbqs Ajl • Input voltage: 400 V (EU standard) • Input current: approx. 32 A (depending on vacuum turbine configuration) • Compressed air connection: 6 bar (dry, oil-free air required) Dimensions & Working Area • Working width: 1800 mm (72”) • Max cutting width: 1800 mm • Max cutting height: approx. 25 mm (compressed with vacuum) • Total width: approx. 2800 mm (incl. electrical cabinet and access space) • Total length: approx. 4500 – 5500 mm (depending on unloading table configuration) • Total height: approx. 1800 mm Performance & Accuracy • Feed rate (X/Y axis): up to 100 m/min • Repeat accuracy: ±0.1 mm (industrial IX-series standard) Key Features • High-speed automated CNC cutting • Precision multi-layer processing • Advanced vacuum hold-down system • Modular cutting bed design • Fully computer-controlled operation • Integrated safety and emergency stop systems • Industrial-grade construction for continuous production Condition Used production condition Operational and tested in real production Inspection possible prior to dismantling Sold as-is, where-is, without warranty Line Integration The system has been operated as part of a complete cutting line together with • 30 C – Finn-Convoy Spreading / loading system • 32 C – Gerber Conveyor / table system All units are available separately or as a complete production line Applications • Garment factories • Denim production • Workwear and uniform manufacturing • Technical textiles • High-volume automated cutting environments Location Valga, Estonia Dismantling and transport Buyer responsible Professional dismantling recommended due to system size

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Bjdpfx Adsxb Efro Aswl - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Bsdpjx Emvisfx Ad Aswl Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,737 h, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, controller manufacturer: RÖDERS, controller model: RMS 6 V3.6, number of axes: 3, This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine. Machine Benefits Technical Machine Benefits • Machine hours: 60737 hours since 2016 • Software version: RMS6 V3.60 • 24-station tool changer • 42,000 rpm spindle Extra Information The machine is in excellent mechanical condition, is powered up and is available for viewing. Bwjdpfx Adsx D Rgme Aol

Condition: used, Year of construction: 2004, turning length 1.300 mm spindle diameter 120 mm spindle bore 38 mm control SIEMENS - 840 D numbers of positions in the tool changer 12 tool taper VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock. The machine is in well-maintained condition. Bsdpfxoxa Hkye Ad Aowl For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-10 | N 10 | N10/2 | N10-2

Condition: good (used), Year of construction: 2022, functionality: fully functional, Niles N 30 MC - 4500 turning-milling center, year of manufacture 2022, Siemens SI 840 D SL control system, travel X/Z 4756/725 mm, Y-axis +/- 250 mm, B-axis swivel range -105° / +95°, B-axis spindle speed up to 5,000 rpm, C-axis main spindle 0.001°, spindle speed up to 3,000 rpm, tailstock, steady rest, 144-position tool magazine, workpiece measurement, gear hobbing software. Bwsdpfx Adoyzd Rio Asl

Condition: good (used), Year of construction: 2019, functionality: fully functional, Niles N 40 MC - 6000 Turning/Milling Center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y axis -200 / +400 mm, B axis 0.001°, B axis swivel range -105° / +95°, tool changer with 192 positions, C axis main spindle 0.001°, spindle speed up to 1750 rpm, 2 gear stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Bedpfx Asyzd Rcjd Aswl

Condition: used, Year of construction: 2010, Technical details: Bwedpjwf Nrajfx Ad Aol spindle passage: 92 mm turning length: 1000 mm z-axis: min.: 404 mm z-axis: max. 1130 mm facing movement (x-axis): min./max.:15 / 335 mm control: Sinumerik SL840D max. torque on the spindle: 2500 Nm tool turret: 12 tools axial operating pressure: 6,0 bar rapid traverse: 20 m/min total power requirement: 88 kVA dimension machine xH: ca. 4,45 x m dimensions of the bar loader L-W-H: ca. L: 5,7 x B: 2,65 x H: 2,4 m CNC lathe with bar loader - inclined bed lathe -SL 840D control with NCU software 2.6, system software 1.4, store turn software 6.4, with one orientable C-axis, without driven tools -KNCS 260-72 chuck, SMW Autoblok -Clamping force generator via clamping cylinder VNK-200/86 / SMW Autoblok -Measuring system Fa. Heidenhain -Sauter VDI50 tool disk turret, electric drive Bar loaderMaster 80HF, type 33LL: -Dimension round material min./max.: Ø 20mm / 80mm -Minimum length of the workpiece: 33-38-43 to 1000mm -Maximum length of the workpiece: 33 - 3300mm / 38 - 3800mm / 43 - 4300mm -Feed speed (adjustable) 150mm/sec. - Return speed (adjustable) 950mm/sec. -max. offcut length: Ø 8+65mm = 400mm / Ø 66+80mm = 250mm -min. remnant 120mm Chip conveyor / hinged belt from Richter, type SP 450/63 -Discharge height = 1000mm, discharge side right Accessories: -div. tool holders VDI 50 -sizing adapter SK50-> VDI 50 -Power chuck Hainbuch Toplus Kombi Ax-zug GR100 -div. sleeves, guide jaws for bar loader Ø 20 - 75mm i.D. *