Used Nutek Destacker for sale (138)

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Ibedov S Synopfx Anmea Can be attached to an existing chain hoist. CE marking. No inspection book available. Suction cup rubber replaced. As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated side board processing line with singulation, trimmer for end trimming, 2 stacking machines, additional discharge, and end trimming of stacking slats: Ibedpfjy Uzldox Anmja Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at a joystick: - Boards are conveyed laterally using a 4-strand overhead chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer Nlewsy Uzhfj D A Tmcob - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick assesses: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box, with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats, with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - trimming length 505 mm for the underlying vibration channel - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - automatic lowering of the finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee processed, packaged, and strapped approximately 15,000 boards of side lumber 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping plant has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. A video of the process can be shown via WhatsApp!

Condition: good (used), Year of construction: 2003, Mechanization for destacking wood bundles up to 6 meters long. Iedpjycxd Eofx Anmoba Bundle deposit chains with a 5-position storage magazine 1 tilt-type destacker 1 descent section with strip retrieval 1 stick separator with bars 1 horizontal conveyor with 5 chains

Condition: ready for operation (used), Waldner dosamat 2.2 cup filling, sealing and capping machine Iodpfx Aoyzyvnenmeba - 2 filling lanes - up to 4,800 cups per hour - cup destacking - piston filler for viscous products - seal foil destacker - heat sealing - capping

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Rotary cup filling and sealing machine Iedpezdzvfjfx Anmeba S version (PLC control) E version (extended basic frame) Approx. 2,500 cups per hour Filling volume: 10 ml - 2,000 ml Suitable for cups/buckets in the food and beauty sector (with or without a handle) 8 stations Operations: - Cup destacking - Cup filling - Cup heat sealing - Cup capping

Condition: like new (used), - machine in stock - after the technical review - very good condition - stacking wedge stacking in one cycle possible   TECHNICAL SPECIFICATIONS: elements length 3000 mm elements width 1300 mm element height 1600 mm Ibjdpfxjfg Iqgo Anmea element centering number of suction cups 20 pieces vacuum pump 1.1 kW lifting capacity 450 kg hydraulic lifting of material 1.5 kW pump motor 1.8 kW arm motor number of cycles 12 / min    number of pickup rollers 48 roll height from the ground 280 mm adjustable suction cup spacing maximum spacing of suction cups 3000 x 700 mm

Condition: used, TECHNICAL SPECIFICATIONS: – Length of feed rollers: 7800 mm – Roller width: 1430 mm – Roller diameter: 110 mm – Destacking system – Stacker width: 1540 mm – Package depth: 1430 mm Ibjdpfxeymd I Ds Anmea – Package height: 1830 mm – Element collection with chains: 1600 mm x 1600 mm – Return of crossbars via belt conveyor: 3000 mm – Crossbar stacking up to 1370 mm at lifting height 1700 mm – Total length: 12 m

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Cabinet length: from 250 to 2500 mm Cabinet depth: from 250 to 700 mm Cabinet height: from 150 to 1400 mm Ibedpjzphrksfx Anmja Working height: 300 mm Pressing pressure (fixed): max. 15 kN Positioning speed (fixed): 25 mm/s Transport interface: no Control: via contactors/protection devices Weight: approx. 2.2 t

Year of construction: 2001, condition: used, Fully automatic infeed system for dovetail cutter Table width max. 620 mm Spindle feeder Automatic length sorting, 3 lengths Package forming, 3 x Buffer Package turner Package destacking Manual infeed Iodpjh Icimefx Anmsba Buffer before the zinc coating system with 6 compartments Specification: Wood input length: min. 150 mm max. 600 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Performance: 6 milling tables/min Working height: 960 mm Table width: 620 mm System width: System length: See pictures System is immediately available, already dismantled.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, cutting width (max.): 1,550 mm, type of input current: three-phase, Equipment: documentation/manual, safety light barrier, Wohlenberg 155 complete cutting line consisting of: 1 # Cutting machine, type 155, with air-cushioned tables on the left and right Ibsdpfxozlb Dxj Anmsa 1 # Lift, type NUP 1600 1 # Shaking machine, type BSB 6/L, with spreading roller 1 # Destacker, type BA 6

Condition: new, Year of construction: 2026, functionality: fully functional, LP-UP 3000 – Intelligent Automation System for Drilling and Double-Sided Edge Banding Machines The LP-UP 3000 is a high-speed intelligent automation system designed to automate panel loading, unloading, and material handling for drilling machines and double-sided edge banding lines. Its flexible design allows it to be integrated with machines from virtually any manufacturer, making it suitable for both new production lines and existing machinery. The system automatically transfers and positions panels, reducing manual handling, operator requirements, and production waiting times. With a processing capacity of up to 20 panels per minute, the LP-UP 3000 provides a continuous and highly efficient production flow. It is an ideal solution for furniture and panel-processing manufacturers looking to increase productivity, reduce labor dependency, and automate their production lines. Main Features: * Compatible with drilling and double-sided edge banding machines * Can be integrated with virtually all machine brands * Automatic panel loading, unloading, and transfer * Intelligent and flexible production control Iodozp N Uaopfx Anmeba * Reduces manual handling and operator requirements * Suitable for integration into existing production lines * Increases production speed, consistency, and overall efficiency

Condition: used, Year of construction: 1994, We offer this used KETTNER RBS 90-80 M pallet destacker, manufactured in 1994. Two machines are available. Adjustable for different pallet sizes; the first destacker is set by default for 100x120 pallets, and the second for 80x120 pallets. Manufacturer: KETTNER Model: RBS 90-80 M Order number: 944707/02 Year of manufacture: 1994 If you have any questions or require further information, please do not hesitate to send us a message or call us. Isdpfx Anezgv Egemeba

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER OFFER INCLUDES 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 1900MM. MAXIMUM LENGTH 4500MM. PACK WIDTH 1200MM Ibedpfey Hb Upsx Anmea PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC.

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Iodpfx Aozh I Iionmoba Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: repair required (used), Year of construction: 1988, Mechanization for in front of a planer for KVH/BSH - For lengths up to approx. 13 m - Ideal KVH+BSH system for upstream of the planer - Longitudinal destacking – singulation Ibodpfx Aneytgr Eomja - Cross-cut saws: 4 circular saws with adjustable side positioning - Crosscut dimensions: 180 x 220 mm, 150 x 300 mm - Operation requires only one person

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, 1. BARGSTEDT TBP16/DG/30/22/S Portal Loading System Iodjzh Uziepfx Anmeba Vacuum portal for raw sheet loading (fixed edge on the right) • Workpiece weight up to 100 kg • Performance up to 5 cycles/min • Pallet return + light curtain protection 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for loading • Capacity approx. 12 pallets • Stacking height max. 1,800 mm

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 505591, SCHMALZ Vacuum Lifter Ijdpfjzhigmjx Anmsba Lifting capacity: 250 kg Maximum panel dimensions: 560 x 250 cm

Year of construction: 2026, condition: used, NEW, built in 2026 Automatic loading and unloading station. Suitable for solid wood, MDF, gypsum board, cement fiber board, and planks. Examples: Doors, planks, MDF panels, cabinet fronts, gypsum board, and facade panels. Adaptations to other products are possible. The machine operates at a constant speed andwith a set loading and unloading capacity. This allows you to easily automateyour loading and unloading processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel. Technical Specifications: - Manufacturer: Ka-Ma - Model: KR-1300-1 - Working width: 1,300 mm - Includes belt conveyor, length 3,000 mm Ibedpfxey S S Hte Anmja - Working height: 930 ± 50 mm - PLC control, operated via a touch panel, Siemens S7-1200 - Loading and unloading of parts via 2 suction plates, length 442 mm - Automatic signal upon completion of the loading process - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height approx. 1,000 mm (including pallet under the plate stack) - Loading side on the left in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting capacity: approx. 85 kg, continuous operation 65 kg - Max. component width: 1,300 mm - Max. component length: approx. 2,850 mm - Max. conveyor belt speed: continuously variable up to max. 10 m/min. - Electric motor power: 1.5 kW- Electronic components: Schneider Electronics and Siemens - Weight: 1,200 kg Optional: 2-circuit vacuum system with 4 additional suction cups and the ability to lift the panels 15 mm on one side before vertical movement; required for all materials that can be vacuum-sealed. YouTube link:?v=WpRUnvPFqN0

Year of construction: 2013, condition: used, Angle transfer 180°, manufacturer Venjakob VEN TRANS Technical data:- Type. VEN TRANS - Manufacturer: Venjakob - Year of construction:2013 - Max. part length: 5.500mm (part length 6,000mm on request) - Infeed roller conveyor Length: 6100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Infinitely variable feed rate - Cross transfer with carriage and lifting rake - Lifting-lowering, pneumatic - Length of transfer arms: 4600 mm - Number of rakes: 43 pieces - Distance between the rakes 140 mm - Outfeed roller conveyor Length: 6,100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Iodpfjzf N Irox Anmsba Feed infinitely variable - Connected loads: - Electrical: 400 V, 50 Hz, 3 phases - Location: At the warehouse in D-32825 Blomberg

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 0-286-09-4837, Equipment: type plate available, The automatic warehouse is fully operational; it is possible to visit the branch and evaluate its operation by prior appointment. Ibsdpfx Asxrlbzjnmea

Condition: like new (used), Fully mechanized line for splitting and cutting (Masterflex+Paul) consisting in: - transverse conveyor for 2 packages - automatic destacking and singularization installation with slat recovery with conveyor included - transverse conveyor for circular feed piece by piece - trolleys on the rail for circular feeding - circular Masterflex provided with 4 movable blades, axis to axis, free passage width of 1,000 mm, cutting height 100 mm - 2 motors of 50 KW, 4 releases electrically controlled by joystick, provided with a control panel - timber evacuation conveyor provided with a waste separator (edges and hems) - waste conveyor + automatic waste cutting pendulum - parts recovery conveyor with return to the operator for repair - transversal conveyor with singularization for feeding optimizer Paul - optimizer Paul model, passage width of 1,000 mm, cutting height of 100 mm, equipped with marking station for defects, with laser (without chalk) Iodpfxjkt I Uyj Anmsba - sorting line by optimizer with 20 ejectors. Installation is in a very good working condition.

Year of construction: 1998, condition: ready for operation (used), ULMAC: Maximum width of elements - 1300mm Maximum length of elements - 2500mm Feeding speed - motor with variator If you are interested in the machine, we can record a video of the startup and work. Isdpfx Ansfkgwksmjba

Year of construction: 1995, condition: ready for operation (used), For sell we have whole line. System TM Bison loading machine Weinig Hydromat H 22 B year 1989 System TM Angus unloading 450 - 2500mm lenght Iedpfx Anotqdfiemsba 20 - 80 mm height 45 - 160 mm width

Condition: used, Year of construction: 2010, functionality: fully functional, We have several Rehm reflow ovens and Rehm drying ovens (paint dryers) for sale. The ovens are in good, clean condition and fully functional. 1 x Rehm VXP nitro 3850 (year of manufacture 2010), type 834 (project no. 2680), location: Buchenstraße 18-20 / 93426 Roding = €4,500 (negotiable) We also offer: Asys TRM 03 (year of manufacture 2012) Asys FPS (year of manufacture 2010) Siplace S 27 and Siplace F 5 HM (year of manufacture 2006) Exra X6 HSP (year of manufacture 2008) – spare parts carrier Knodel drying oven (year of manufacture 2015) Nutek Coating Inverter (year of manufacture 2014) Iodpfsw Srqqox Anmsba and more. Please contact us; we will gladly send you further information and photos of our equipment.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Pallet stackers or dispensers are used for automatically stacking and destacking of empty pallets to a complete pile. Those empty pallets can be loaded by any pallet truck or forklift. (similar to green palomat) Type PD15 In very good condition Capacity: 15 europallets Dimension pallet : 1200 *800 mm Dimension machine : 1.600x1.370x2.170 mm Control: electrical on 220V (single phase) no need for compressed air Ibedpfx Aneg Du Epomoa