Used Oerlikon Welding Rectifier for sale (7,086)

Condition: new, Year of construction: 2026, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Lasdpon Sl D Rjfx Ahajh

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine Laodjxy Hqtepfx Ahaeh -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Condition: not inspected (used), Welding/Cutting Torch Set Stock number: Manufacturer: unknown, possibly Apolda Ljdpo Aavp Aefx Ahajah Consisting of: optical assembly hose set, hose lengths approx. 8 m torch pressure gauge additional hose set approx. 4 m Complete set, see images.

Condition: not inspected (used), functionality: unexamined, total height: 880 mm, total length: 3,000 mm, total width: 1,500 mm, table width: 1,500 mm, overall weight: 2,500 kg, hole diameter: 30 mm, table length: 3,000 mm, Spot welding table Lasdpfx Asz Spwlohaoh FCA D-35614 Aßlar – loaded onto a truck.

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 100 m², suction capacity: 7,500 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, fume extraction, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2008 The filter is cleaned by a microprocessor controller using pulses of compressed air during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central Filtercube filter ventilation unit, equipped with cartridge filters, provides an ideal solution for almost all problems in the field of fume and dust filtration. The fan is located on the clean side, minimizing the risk of explosion. The Filtercube production series is certified by a German institute according to DIN EN ISO 15012-1 and approved for welding class W3 as a stationary fume extraction unit. Applications: central extraction system for multiple welding stations Laedpfx Ao Aazd Eohajh extraction system for welding robots extraction system for thermal cutting and grinding tables system for general ventilation of halls (push-pull system, buoyancy system) extraction system in combination with an extraction table extraction system for grinding non-explosive materials Parameters: *Fan with a power of 7.5 Kw. *Capacity 7500 m3/h *Maximum vacuum 3000 Pa *Filtration area 100 m2 *Noise silencer Stock number: 1178

Year of construction: 2017, condition: ready for operation (used), A spinning, drawing and winding line for the production of monofilament yarns, multifilament FDY and POY is available. Spinning positions: 24, yarn ends: 192, drafting: cold and hot godets, package change: without yarn breakage, number of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Including various spare parts for the machine and electronics. Documentation available. On-site inspection is possible. Ledpfx Aouanq Tohaoah

Year of construction: 2007, operating hours: 500 h, condition: refurbished (used), functionality: fully functional, length of welding knife: 1,000 mm, welding current at 100% duty cycle: 32 A, welding power (max.): 21 kVA, width of welding knife: 10 mm, machine/vehicle number: 1400, Equipment: type plate available, High frequency suspended welding machine, 12KW, double adjustable electrode 10x1000mm. Lodpo Abcmqsfx Ahasah Revised according to current EC legislation, plexiglass protection, 12 months warranty

Year of construction: 1988, condition: used, Offered is a high-frequency welding press with film feed. Equipped with: press unit, hydraulic power unit with electric motor, control panel with switches and indicator lights, worktable with film guide, side-mounted roll holders, film unwinding unit and separate electrical cabinet. Inspection possible by appointment. Laedpfe Adt Eiex Ahash

Condition: good (used), Year of construction: 1973, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 860 mm, Oerlikon milling machine, lightly used, only employed for punch tool repairs. Guide columns are like new, showing no signs of wear! Highly precise, equipped with FAGOR CNC control. Suitable for workpiece weights up to 3000 kg. Lsdpfxsz Duqae Ahasah

Year of construction: 1985, condition: used, Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026. Laedpsz Agfpofx Ahajh

Condition: used, Year of construction: 2007, max. wheel diameter 400 mm workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control Siemens 840D weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron) Laodoy D T Sujpfx Ahaoh

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, load capacity: 1,500 kg, Equipment: documentation/manual, Used rotating device in very good condition. - Year of manufacture 2016, mobile, rotatable 360° for assembly, welding, etc. - One unit driven, the other unit rotates passively. - CE certified, with documentation. - Adjustable axle distance. - Max. component weight 1500 kg. - Max. diameter 1600 mm. - Max. component torque 2080 Nm. - 2-hand operation. - Optional foot control. Laedpfxoz S U Rdj Ahajh - Protection 16 A. - Own weight 670 kg. Like new. 2 units available for sale.

Condition: good (used), Machine is in good condition. Ljdpfx Ahjzb Nfqoaeah

Condition: used, functionality: fully functional, machine/vehicle number: 99-664, type of cooling: water, welding current (max.): 160 A, Equipment: documentation/manual, type plate available, Orbital welding system consisting of a power supply, manufactured by Orbimatic, model Orbimat 160 C, and welding head Orbiweld 76 S. Ledpfxoz R Urys Ahasah Includes various collets (4 x 21.3 mm / 4 x 15 mm / 4 x 8 mm / 4 x 17 mm / 4 x 26.9 mm / 4 x 45.6 mm / 4 x 11 mm / 4 x 30 mm / 4 x 25 mm / 4 x 22 mm / 4 x 35 mm / 4 x 20 x 20 mm / 4 x 33.7 mm, and 16 other collets without a complete set). - Model: Orbiweld 160 C - Includes welding head Orbiweld 76 S and accessories - Control unit with display and keypad - Includes keyboard for operation - Mounted on a mobile metal rack - 230 V - Pressure reducer - Operating manual

Condition: used, Year of construction: 2015, type of input current: three-phase, input voltage: 400 V, filter area: 286 m², suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16-R Year of manufacture: 2015 Unit in the "R" version – reinforced construction with additional grounding. Built-in explosion relief flap. Delayed dust discharge valve, EX ATEX certified. Lodpfx Ahoz Trrheaeah Filtration area: 286 m2 Fan power: 7.5 kW Capacity: 6000 m3/h New filter cartridges installed in the unit. Stock number: 1029

Condition: used, functionality: unexamined, For sale is a Leybold RUTA vacuum pump unit in adapter configuration, consisting of a RUVAC WS 501 rotary lobe pump and a TRIVAC D 65 B rotary vane pre-pump. Technical data and markings: - Configuration: RUVAC WS 501 / TRIVAC D 65 B / Adapter - RUVAC catalog number: 11732 - RUVAC nominal pumping speed: 505 m³/h - TRIVAC D 65 B, catalog number 11296 - TRIVAC serial number: 31000491088 - TRIVAC pumping speed: 65 m³/h - Pumping speed of the pump unit at 0.1 mbar: approx. 380 m³/h - Ultimate partial pressure: < 2 × 10⁻⁵ mbar - Installed motor power: approx. 4.4 kW - Connections: DN 63 ISO-K on the suction side, DN 40 ISO-KF on the discharge side - Druschke article number: SGWS501 - Druschke serial/ID number: 11732-ID15931 - RUVAC marking 2003/08; TRIVAC marking CW 31/2011 Visible scope of supply according to the images: - RUVAC WS 501 Lajdjzzr Nkopfx Ahaeh - TRIVAC D 65 B - Direct adapter - Side filter/separator housing - Connection line, cable, and plug - Base frame with drip tray Used condition with dirt, paint damage, and slight corrosion. The operational condition and achievable vacuum performance were not re-tested after disassembly; therefore, it is sold as untested. A control cabinet or frequency inverter is not shown and is not part of the described scope of supply. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and by prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Manufacturer refurbished, tested, and fully functional Leybold WSU 2001 H PFPE vacuum pump available for sale, with a 6-month warranty. Worldwide shipping available – request a quote! Laodpfx Aheyrr Ehsajh If you are looking for vacuum pumps, accessories, or any vacuum technology related equipment, please contact us. We are happy to assist you with purchasing, technical advice, or developing custom solutions.

Condition: as good as new (ex-display), JUNE OFFER: -10% on all welding equipment throughout June. We offer welding equipment in various configurations and always have several sets in stock. CMT / ROBOT / CMT hose packages, UNIVERSAL or HOLLOW WAVE robots. Everything is in stock and immediately available! Don’t hesitate and request your individual configuration! We also have a wide variety of spare parts in stock – discounts of 30%, 50%, and 70%. Just send a short email, call, or use WhatsApp. CMT equipment at 1/3 of the new price! - 66% DISCOUNT ALL EQUIPMENT CAN BE INSPECTED IN VIENNA and purchased without waiting! The prices quoted are all from ... Euro. The prices/offers are individually tailored to the equipment configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the item. Please see the numerous YouTube videos on the topic of CMT! Also reachable via WhatsApp and Viber. In stock in Vienna 1230. Shipping on a pallet is possible for an additional charge: Austria approx. 180 Euro Germany approx. 230 Euro Europe on request All prices are ex-price. You can configure the equipment with us. Robot or handheld device. Long or short connection hose package. Various hose packages to choose from. Synchro pulse. 270, 400 or 500 amp equipment in stock. CMT version available as handheld or robot. It is best to call us, we will discuss your area of application, and you will receive an initial price estimate from us. Lsdpfx Ahehzhynsajah

Condition: used, total height: 1,000 mm, total length: 3,000 mm, total width: 1,500 mm, Year of manufacture: 2026 Colour: Grey Empty weight: 1.000 kg Price is without tools/belongings - Year: 2026 - Model: Hardened metal - Table length [mm]: 3000 - Table width [mm]: 1500 - Table top thickness [mm]: 15 - Max. workpiece weight [kg]: 4000 - Options: - └ Hole diameter [mm]: 28 Ledpfx Aoz U I Rvshajah - Transport dimensions: 3000mm x 1500mm x 1000mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2010, condition: used, Double-head PROFTEQ SA 22 welding machine, manufactured in 2010, designed for welding PVC profiles used in the production of windows, doors, frames and sashes. The machine is equipped with two welding heads, one fixed and one movable, allowing both right-angle and variable-angle welding operations. The fixed head performs welding at 90°, while the movable head allows variable-angle welding from 45° to 180°, providing greater versatility in window and door manufacturing. The welding cycle is automatic and includes the heating, melting, joining and cooling phases of the profiles. Technical Specifications Manufacturer: PROFTEQ Model: SA 22 Year of manufacture: 2010 Machine type: Double-head welding machine for PVC profiles Number of welding heads: 2 Fixed head: 90° welding Movable head: Variable-angle welding from 45° to 180° Welding cycle: Automatic Minimum weldable profile height: 35 mm Maximum weldable profile height: 190 mm Maximum weldable profile width: 150 mm Power supply: 380 V Frequency: 50 Hz Installed power: 4 kW Pneumatic pressure: 8 bar Weight: 1,000 kg Overall Dimensions Length: 3,800 mm Depth: 1,100 mm Height: 1,900 mm Features and Equipment Lajdpfj Abbbajx Ahajh Two welding heads for processing PVC profiles. Movable welding head for variable-angle welding operations. Pneumatic profile clamping system. Heating plates for melting the surfaces to be welded. Welding bead limitation system. Dedicated control panels for each welding head. Adjustable welding parameters, including temperature and processing times. Automatic welding cycle.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: R08175632, empty load weight: 135 kg, 1. Robot for welding "FANUC" – Arc Mate 1001C/6L Type: A05B-122.1-B301 No.: R08175632 Date: 2008 Weight: 135 kg 2. Rotary positioner "FANUC 2-axis Servo Positioner" Type: A05B-1220-J201 No.: R07255039 Date: 2007 Lsdet N Rmkjpfx Ahaeah Weigh: 295 kg 3. Welding device "CEBORA , with a welding control panel for connecting to the "Arc-On" robot Type: MIG 5040/T D PULSE No.: D32264 Operating voltage: 400V, 50/60Hz, 36A Max. el. power: 500A-40%; 450A-60%; 430A-100%

Condition: used, Year of construction: 2006, voltage 110 - 230 V frequency range 50 - 60 Hz Lodeyhq T Aspfx Ahaoah Power connection 0,5 kVA Dimensions (HxWxD) 1000 x 800 x 1750 mm weight 150 kg Measuring machine for bar knives. Equipment/accessories: -Measuring tools -Clamping devices -Computer -Monitor -Printer -Cabin -Technical documentation

Condition: used, total height: 500 mm, total length: 2,000 mm, total width: 1,000 mm, Year of manufacture: 2026 Colour: Grey Empty weight: 500 kg The price does not include accessories. - Year: 2026 - Model: Hardened metal - Table length [mm]: 2000 - Table width [mm]: 1000 - Table top thickness [mm]: 15 - Options: Diagonal grid, Drilled holes, Adjustable working height, Clamping grid - └ Hole diameter [mm]: 28 - Transport dimensions: 2000mm x 1000mm x 500mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Ledpfx Ahoz U I Ubjaoah Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t Laedsvxwxcepfx Ahash dimensions of the machine ca. 3,2 x 2,5 x 2,3 m

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Max. tip diameter: 1000 mm Min. root diameter: 40 mm Lasdpfxsyucd Hj Ahaeh Min. module: 1 Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Opal grinding wheel and diamond disk Only single profile grinding possible, see photo.