Used Oma 1850 for sale (6,464)

Condition: used, mileage: 247,475 km, power: 370 kW (503.06 HP), first registration: 05/2003, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, Equipment: air conditioning, * Radio Nwodpfx Ajzntlaei Ten * Air conditioning * Manual transmission * Cruise control * Leaf spring suspension * Three-way tipper * Palfinger PK 16502 loading crane * 2x hydraulic supports at the front -----Internal vehicle number: 12295 Errors and prior sale excepted.

Condition: used, mileage: 1,001 km, power: 3 kW (4.08 HP), gearing type: other, fuel type: diesel, color: yellow, empty load weight: 111 kg, first registration: 01/2006, Year of construction: 2006, driver cabin: other, Vehicle location: Bovenden, Nwsdpfx Aoxy Sw Soi Tjn Hatz diesel engine! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: used, Year of construction: 2012, Edge banding machine Manufacturer: Homag Type: KAL 211 Year of manufacture: 2012 Technical data Feed rate: 18-25 m/min; with FK11 max. 20 m/min Working height: approx. 950 mm Machine length: approx. 7,845 mm Workpiece thickness: 12-40 mm standard; version up to 60 mm Edge material roll: approx. 0.3-3 mm Edge material strip: approx. 0.4-6 mm Roll diameter: max. 830 mm Pneumatics: 6 bar, Electrical: 400 V / 230 V, 3 phases, 50 Hz Units / Equipment - Release agent spray unit top/bottom - Joining milling unit - Gluing unit - 2-roll edge magazine - Pressure zone - Trimming unit HL81 - Pre-milling unit BF10 - Profile milling unit FK11 - Profile drawing blade PN10 - Finishing unit with glue joint drawing blade and buffing unit - Preparation for HOMAG 1 laserTec - powerControl PC22 with touchscreen - Automation packages - In addition, drawing blades for both 2mm and 1mm edges are available. Njdpfs Af Ip Dsx Ai Tjwn PUR retrofit 2023 In 2023, the machine was retrofitted with a PUR gluing system from GP Service, type EasyPUR AC 34, as well as a RIEPE spray system, type LP289/99 24 V. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 2306_16_4003, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, type of input current: DC, edge thickness (max.): 2 mm, feed rate X-axis: 20 m/min, total height: 850 mm, total length: 1,000 mm, total width: 700 mm, overall weight: 170 kg, SCHUGOMA System TMS_8462 – mobile edge banding machine for zero-joint technology – Siemens control For sale is a mobile edge banding machine for zero-joint technology from SCHUGOMA System GmbH, model TMS_8462, manufactured in 2016. The machine has hardly been used, is in very good condition, and is ready for immediate use. It features a Siemens control system and is suitable for woodworking companies, carpentry shops, and furniture manufacturers. This is an interesting opportunity for companies looking for a scarcely used machine for professional zero-joint technology. The machine can be inspected on-site by appointment. Interested parties can personally verify its condition and operational readiness. Nedpfx Aio Adqr He Tswn

Condition: used, Year of construction: 1962, -Cylinder head has been overhauled. -Fuel injectors have been repaired and adjusted. Nedpfxo Afivye Ai Tjwn MAS250520 Price applies to the current condition. Offer subject to change. Errors, modifications and prior sale reserved. All information without guarantee.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Used BOMAR Ergonomic 290.250 GAC fully automatic bandsaw machine, manufactured in 2012. This professional horizontal bandsaw machine is suitable for the automatic cutting of various metal profiles, tubes, and solid materials. The machine features a fully automatic sawing cycle, a hydraulic saw arm, and a hydraulic material clamp. The cutting length and the number of parts to be cut can be set, making the machine very suitable for series production. The saw arm can be adjusted for miter cuts. Automatic cutting is possible up to 45°, while semi-automatic cutting is possible up to 60° under certain conditions. Specifications: Max. cutting diameter: Ø 250 mm Max. cutting capacity 0°: approx. 280 × 230 / 290 × 230 mm Max. square material 0°: 250 × 250 mm Saw blade: 2,910 × 27 × 0.9 mm Sawing speeds: 40 / 80 m/min Motor power: 1.1 / 1.5 kW Connection: 3 × 400 V Njdpfs Afp T Sex Ai Tswn Min. cutting diameter: Ø 5 mm Hydraulic up and down movement of the saw arm Hydraulic material clamp Dimensions: Length: 1,790 mm Width: 1,810 mm Height: 1,200 mm Weight: approx. 575 kg

Condition: good (used), total length: 5,500 mm, total width: 1,850 mm, plate height: 300 mm, Manufacturer: STOLLE Type: DT-5.5 Specifications Metric US Standard Length 5000 mm Width 1850 mm Height 300 mm Number of T-slots 6 T-slot pitch / spacing 285 mm Nsdpfx Ajwp D N Uoi Tewn T-slot size 32 mm Number of matching pieces 1 Dimensions (estimated) Length 5500 mm Width 1850 mm Height 300 mm Weight 7500 kg Please note: The information on this page has been compiled by us to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent any representations or contractual conditions. We recommend you verify all important details.

Condition: used, axle configuration: 3 axles, first registration: 03/2010, loading space length: 13,390 mm, loading space width: 2,460 mm, loading space height: 2,420 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 1,310 mm, Tyre size: 385/65R22.5 Suspension: air suspension Nwsdsxxx D Nspfx Ai Tjn Drive: Wheel GVW: 39.000 kg

Condition: used, Year of manufacture: 2020 New: No Field of application: Construction General condition: good Technical condition: good Visual appearance: good Serial number: 120046 Please contact Christopher Oldenburg for more information Nsdps Af Evpefx Ai Tjwn

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x100mm, 4x80mm including the piping shown, connected to 200mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be stored Units: Upper pressure, manual adjustment with crank and SIKO counter Infeed guide, manual adjustment with SIKO counter Jointing cutter with diamond cutters, sharpened A total of 2 replaceable glue tanks for quick color change from white to transparent Gluing unit with automatic edge feed for roll material up to 3 mm Pressure zone with 3 rollers Nwsdpfx Ajzn Afpei Tjn Crosscut saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering and radius Corner rounding cutter R2 with diamond cutter, 1 motor Radius trimming blade R2, manually adjustable Glue joint trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking Operating manual in folder format All indexable inserts of the milling units and trimming blades have been replaced or resharpened, saws sharpened, diamond jointing cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been replaced, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses renewed. Approx. 1200 operating hours, i.e. only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 1992, Hydraulic linkage for bale handling, computer-controlled spray system. Nwsds Afgw Uepfx Ai Ten

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles Nwodpfxezqggvj Ai Tsn 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 - VISCOM upgrade to VEG 101 - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports Nwedpjzuw R Hofx Ai Tjn - Invoices for the work performed - VISCOM training materials - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0-201-24-0260, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance Z-axis: 600 mm, workpiece length (max.): 3,470 mm, workpiece width (max.): 1,550 mm, number of slots in tool magazine: 18, controller manufacturer: HOMATIC, controller model: PC85, spindle motor power: 15,000 W, Equipment: CE marking, documentation/manual, Machine with shuttle console tables Workpiece length X max. (all units) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece length max. (milling cutter D=25 mm) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Nwedpfo Afabajx Ai Tsn Workpiece width Y max. (all units) - max. 1300 mm Workpiece width Y max. (milling cutter D=25 mm) - max. 1550 mm 2 individually movable console clamping tables - 4-position workpiece placement possible - 8 movable consoles (4 per table) each with 1 front stop - Console length 1490 mm - 4 lifting rails - Side stops 4 x left, 4 x right (mirror image) - 1 vacuum circuit per table - 2 vacuum pumps, 140 m3/h each - Chip conveyor belt Equipment / Units: - Milling spindle 15 kW, liquid cooling - Tool changer, 18-position carousel - C-axis with electrical interface - C-axis extension for FLEX-5 unit - Drilling unit 2.7 kW, 20 spindles vertical / 10 spindles horizontal - Swiveling sawing/drilling unit - Sawing unit D=1200 - FLEX5 sawing, milling, drilling unit for multi-tool - 16 pcs. suction cups 160x115 mm - 8 pcs. suction cups 125x75 mm Control / Software: - PC85 control system - WoodWop 5.1 - Wood Design Package - CAD plugin - DXF import - Schuler MDE Available from week 46/2026.

Condition: used, Year of construction: 2018, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker, clothes locker Nsdpfxethrwcj Ai Tewn -Manufacturer: Pavoy, steel locker: three-winged, compartment width 30 cm -Width: 930 mm -Depth: 500 mm -Height: 1850 mm -Doors: lockable, without lock -Number: 2x lockers available -Price: per piece -Weight: 51 kg

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Mortising carriage: - Electric feed with stepless speed control - Carriage adjustable in angle - Feed motor 0.46kW - Table size (length/width) 700x450mm, extendable to 1150mm - Cross slide on the carriage – cutting length on the extendable telescope 1860mm - Rotating block in the cross slide - 2 pneumatic clamps Length-cutting saw: - Max blade diameter 380mm - Max cutting height 110mm - Blade adjustable up/down, front/back and in angle - Blade guard - Saw motor 2.2kW Mortising spindle: - Pneumatic spindle stroke - Spindle adjustment up/down and stroke adjustment using knobs - Max tool diameter 320mm - Spindle diameter 40mm - Spindle working height 220mm - Spindle lock - Motor 7.5kW Profiling spindle: - Pneumatic spindle stroke - Spindle adjustment up/down and stroke adjustment using knobs - Max tool diameter 200mm - Spindle working height 220mm - Spindle diameter 54mm - Spindle lock - Sliding support from the table - Motor 7.5kW Saw for cutting window bead: - Max blade diameter 200mm - Blade bore diameter 30mm - Blade adjustable front/back, up/down - Blade guard - Motor 2.2kW Feed: Nwodpfx Aij Af U Ehj Tsn - Number of rollers 8 pcs - Motor approximately 0.55kW - Roller size 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Suction nozzle diameter 60mm, 2x130mm, 110mm, 100mm - Working pressure 6-8 bar - Dimensions (length/width/height) 3600x2100x1600mm, weight approximately 2500kg ADVANTAGES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Length-cutting saw – Mortising spindle – Unpainted, used machine, very good condition Net price: 27900 PLN Net price: 6488 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2014, Universally applicable frame and elongated hole drilling machine Nwjdpfx Aj Aa A Eqoi Tjn Specifically designed for window construction and universal use with pneumatic height adjustment. Double-hole drilling on two levels in a single clamping operation. Motor power: 1.5 kW Motor start with a practical handle switch. Equipped with a two-jaw chuck, 1–20 mm, by Röhm. Pneumatic adjustment of the machining height, allowing dowel holes to be drilled on two levels without re-positioning. The desired drilling heights can be set for each drilling level using a digital counter. Switching between levels is then performed pneumatically from the front. Cross adjustment: 430 mm, stepless or in a 12 mm grid. Maximum height adjustment: approximately 100 mm above table height. Drilling stroke: approximately 150 mm. 2 pneumatic workpiece clamps. Grid rail for quick lateral adjustment in a 12 mm grid. Stop for length adjustment when milling elongated holes. 2 swiveling workpiece supports. Special stop system, approximately 3.1 m long, with swiveling stops. Removable special stop with centering via a lever mechanism for different ladder rung widths, etc. Dust extraction funnel. Center stop. Side stop. Drill head mount. Laser. Operating manual. CE marking. Few small areas where paint has been touched up. Almost new condition, see original photos. Dimensions: approximately 1500 x 900 x 1400 mm (L x W x H), weight: 300 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this seller."

Condition: excellent (used), Year of construction: 2022, Wobarg 1700 Automatic Stacker / Strapping Machine 2022 – Industrial Packaging & Strapping Machine Manufacturer: Wobarg Maskinkonstruktion ApS, Denmark Type: Automatic Stacker / Strapping Machine Year: 2022 Machine number: 1700 Control system: Siemens SIMATIC HMI Compressed air: 6 bar Frequency: 50 Hz The machine features an integrated conveyor system, adjustable product guides, pneumatic handling components, motor-driven mechanisms, and a Siemens SIMATIC touchscreen control panel. The system is enclosed by transparent safety guarding with access doors and emergency-stop controls. Automatic stacking and strapping configuration Siemens SIMATIC HMI operator panel Integrated motor-driven conveyor belt Adjustable product positioning and guiding Pneumatic handling system Industrial electric motor and gearbox Strapping material reel holder Safety enclosure with transparent panel Nwjdpfx Aie Afango Ton The machine is available for inspection. Operating condition, production capacity, and suitability for specific products should be verified before purchase. Manufacturer & Machine Identification: Wobarg, Wobarg Maskinkonstruktion, Wobarg Maskinkonstruktion ApS, Wobarg Stacker, Wobarg Strapping Machine, Wobarg Stacker Strapping Machine, Wobarg 1700, Wobarg 2022, Cyklop, Cyklop packaging, automatic stacker, automatic strapping machine, industrial stacker, automatic stacking machine, stacking and strapping machine, automated packaging equipment, Siemens SIMATIC HMI. English – Packaging & Strapping Machinery: Automatic strapping machine, industrial strapping machine, automatic strapper, automatic stacking machine, stacker strapper, stacking and strapping system, automatic bundling machine, industrial bundling machine, bundle strapping machine, product stacking machine, automatic product stacker, packaging line equipment, automated packaging line, end-of-line packaging, end-of-line automation, packaging automation, industrial packaging machinery, automatic packaging system, conveyor strapping machine, inline strapping machine, automatic banding machine, PP strapping machine, plastic strap machine, automatic product handling, industrial conveyor system, production line automation, secondary packaging equipment, bundle packaging machine, product grouping machine, packaging conveyor, stacking conveyor, industrial handling equipment. English – Food Industry & Processing: Food industry equipment, food processing equipment, food packaging machinery, industrial food packaging, food production line, food packaging automation, food handling equipment, automated food packaging line, food factory equipment, food processing plant machinery, secondary food packaging, food product stacking, food product bundling, food industry conveyor, food production automation, frozen food packaging equipment, chilled product handling, industrial food handling, food packaging line equipment, food factory automation, packaging machinery for food manufacturers. English – Dry Ice Industry: Dry ice production equipment, dry ice packaging equipment, dry ice packaging line, dry ice block handling, dry ice block stacking, dry ice block strapping, dry ice production line, dry ice processing equipment, dry ice factory machinery, CO2 dry ice production, dry ice block production, dry ice industrial equipment, dry ice handling equipment, dry ice production automation, dry ice packaging automation, dry ice block bundling.

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, input voltage: 230 V, total width: 1,100 mm, total length: 8,000 mm, total height: 2,000 mm, overall weight: 1,300 kg, For Sale: Senio Machinery High-Speed, Full 12x10ML Bottling Line – 2018 Manufacturer: Senio Machinery, China (no longer in business) Model: SM12-12-8 Year of Purchase: 2018 Condition: Fully operational Application: 10ML e-liquid production (can be modified). - Equipment Overview A high-output, 10ML, fully semi-automatic filling, plugging, capping, and labeling line. Used for 10ML PET bottles and for filling e-liquid (non-aromatic). Equipped with 12 piston pumps. Designed for 120 bottles per minute (BPM) at optimal speed and viscosity. Suitable for e-liquid, liquid filling, and other compatible production applications. • Price in 2017: $103,000 (€92,000) Nodpsz S Aatsfx Ai Town - Condition & Availability The equipment is available for inspection by appointment. Further technical information, photographs, videos, and details can be provided upon request. Location: Aalborg, Denmark

Condition: used, Year of construction: 2004, operating hours: 13,194 h, Equipment: all wheel drive, Manufacturer Komatsu Model WA320-5H 4x4 15 t. Hjullæsser Nwsdpfj Afr Ifex Ai Ten Year 2004 Condition Good Ref. nr. 228210 Hour: 13194 Eurotype: 3 Net weight: 15500 kg. Shovel: ? Climate: ? Tire Size: 650/65R25 Cover% left 40 - 40%

Condition: used, Year of construction: 1995, Omarv TF280HF Mulcher Machine has been refurbished. Nwedj Afh Easpfx Ai Ten The following parts have been replaced: -Bearing housing of the PTO shaft -28 hammer flails MAS300570 Price applies to the current condition. Subject to change without notice. Errors, modifications, and prior sale reserved. All information without guarantee.

Condition: excellent (used), CATALOGUE NUMBER 7998 Technical data: - Spindle diameter 30mm Nsdpfx Ae Af U D Isi Tewn - Spindle working height 120mm - Interchangeable spindle - Spindle locking - Adjustable up/down - Original cast iron guide with full adjustment - Original cast iron carriage with material clamping device + square - 4 types of rotation speeds + right/left 3000, 4500, 6000, 9000 rpm - Table dimensions 1020x1000mm - Square on the table - With brake - Motor 5.5kW - Dust extraction nozzle diameter 100mm, 120mm - Dimensions (L/W/H) 2200x1320x1310mm - Weight 966kg Advantages: - Made in Poland - Side carriage - Square on the table and on the side carriage - Used milling machine, very good condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in exchange rates)

Condition: good (used), Year of construction: 2000, The Lock Inspection Systems MET 30+ metal detector with conveyor belt is designed to detect metal contaminants in products. The machine is suitable for integration into production lines and contributes to reliable quality control and food safety. The metal detector features a user-friendly control panel with start and stop buttons and an emergency stop. Its stainless steel construction ensures durability and easy cleaning. Nwjdpfx Ae Afrx Rji Tsn Features: - Metal detection for quality control and food safety - Integrated conveyor belt - User-friendly control panel - Start and stop buttons and emergency stop - Stainless steel construction - Suitable for integration into production lines - Equipped with an automatic rejection system (pusher) that pushes products containing detected metal contaminants sideways off the conveyor belt. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. - Since 1977 supplier of reliable used agricultural and horticultural equipment - Machines are checked for delivery - Experienced team - We can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), power: 58 kW (78.86 HP), operation weight: 12,000 kg, Year of construction: 2006, operating hours: 4,870 h, BOMAG BW174 AD with BS180 spreader Asphalt Manager Year 2006 Operation hours: 4.870 hrs. Drum width : 1.68m Cummins engine with 58 kW CE / EPA Operation weight: 12 to Nwodpe Afhi Sefx Ai Ton

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Max feed speed: 40 m/min Nwedpfx Ajx A Hfvji Tsn