Used Optical Profile Grinding Machine for sale (68,671)

Condition: used, Year of construction: 2001, 2001 Kellenberger CNC Grinder KEL-VARIA RS175/1000 Lhjdpfoywftdex Akujg

Condition: used, Danley Onsrud, model WT-2-1284A, 460V, 3 phase profile machine, S/N 797387-01, with push button controls, winning bidder responsible for proper disassembly and removal, includes table with assorted components, and hydraulic unit with 3 phase electric motor and 35" width x 12" height x 24" depth tank and coolant unit, also includes (1) skid of assorted parts, no other info available, winning bidder responsible for proper disassembly and removal, and capping of all wires. Lhedpfoxdddrjx Akueg

Condition: good (used), Year of construction: 2011, LANDIS LT-2 TWIN WHEEL CNC ORBITAL CRANK GRINDER Equipped with: Landis 6400 CNC Control Siemens TOUCH HMI Arobetech Steady Rest Marposs P7 Gage System Lateral Locator Twin CBN Grinding Wheels Rotary Dresser Ljdpfx Akjrtrxxsushg Headstock Tailstock Rittal AC Units Specifications: Maximum Center Distance: 680 mm

Condition: good (used), Year of construction: 2013, TOYODA (JTEKT) GL32M-63 CNC UNIVERSAL CYLINDRICAL GRINDER Equipped with: CBN Grinding Wheel Flagging Steady Rest Workhead Mounted Rotary Dresser Marposs P3SE System Monitoring Toyoda In Process Gaging Marposs E20N Acoustic Controller Air Gap Eliminator Workpiece Collision Control Coolant Pumps W/Magnetic Separator Pendant Control RH Workhead with Center LH Workhead with Center Work Rests Worklight Light Curtains Stacklight Extra Wheels Specifications: -Grind Center to Floor: 1,000 mm -Swing Over Table: 320 mm -Distance Between Centers: 630 mm -Grinding Diameter Range: 10 - 150 mm Lhedpfertrzpjx Akusg -Floor Space (Base machine w/auxiliary equipment): 3,400 x 5,000 mm -Net Machine Mass (approx.): 10,500 kg Grinding Wheel: -Type: CBN Wheel -Wheel Size (OD): 350 mm -Maximum Wheel Width: 60 mm -Surface Speed: 120 m/s Wheelhead: -Spindle Bearing: TOYODA STAT Bearing -Slide: V and Flat -Feed System: Ballscrew -Rapid Feed (on diameter): 30 m/min -Minimum Incsrement (on diameter): 0.0001 mm Workhead: -Type: Dead Spindle -Work Speed (Max): 500 rpm -Center Taper: MT #4 Footstock: -Type: Hydraulic -Taper Compensation: Manual -Maximum Center Retraction: 60 mm -Center Taper: MT #4 Motors: -Wheel Drive Motor: 15 kW, Belt-Drive -Wheelhead Feed Servomotor: 1.3 kW Tank Capacities: -Wheel Spindle Lubrication Oil: 80 L -Hydraulic/Lubrication Oil: 20 L

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Lhedpfxsxh Rqtj Akuog Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: used, functionality: fully functional, Jones & Shipman 540 Precision Surface Grinder Classic Jones & Shipman 540 precision surface grinder in good used industrial condition. Highly regarded British-built machine ideal for toolrooms, precision engineering, fabrication and general grinding work. Fitted with magnetic chuck, adjustable table feeds and coolant guards. Solid, accurate and reliable machine with heavy cast iron construction throughout. Features: Jones & Shipman 540 model Precision surface grinder Lhodoy R D Dzopfx Akusg Magnetic chuck fitted Manual table and cross feed controls Coolant splash guards Heavy duty cast iron build Ideal for precision grinding and toolroom work Condition: Used workshop condition with normal cosmetic wear for age. Machine is complete and well maintained. Suitable for engineering workshops, maintenance departments, toolmakers and restoration projects. Loading available on site. Transport can be arranged. Viewing welcome. Open to sensible offers.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 6,650 mm, total width: 1,000 mm, overall weight: 2,300 kg, Brand: Zafferani - Year: 2004 Lhsdpjymm Imjfx Akueg - Model: Combined Flat / 60 - With variable angle - Total running meters: 141,600 meters - Feed direction: left to right - Speed: 0.4 to 3.2 m/min - Glass thickness: 3-25 mm - Removal: 0-3 mm - Infeed: 2000 mm - Outfeed: 2000 mm - Machine: 2650 mm - Total machine length: 6650 mm - Width: 1000 mm - Working height: 890 mm - Weight: 2300 KG - Power: 11.6 kW / 230 V (16 A) - Water tank included.

Condition: new, Year of construction: 2026, shaft diameter: 50 mm, - Shaft diameter 50 mm - Rotates clockwise and counterclockwise - Suitable for horizontal/vertical use - Foot control - Emergency stop Ljdpswv Ufasfx Akujhg - Documentation - 400V

Condition: not inspected (used), Year of construction: 1996, center height: 175 mm, grinding length: 1,000 mm, Fanuc 16 Internal spindle Coolant tank Lodoy Tv Uwepfx Akujhg

Condition: new, Spindle motor power: 5.5 kW, 400 V Table dimensions: 400 x 800 mm Table longitudinal hydraulic travel: 850 mm Table transverse manual travel: 440 mm Ledpfoy T H Rvjx Akushg Distance between spindle and table: 580 mm Table load capacity (max.): 700 kg T-slot dimensions: 3 x 14 mm Table moving speed: 5~25 m/min Y-axis handwheel feed rate: 0.02 mm Y-axis handwheel one revolution: 5 mm Automatic Y-axis movement: 0.5~12 mm Y-axis rapid traverse speed: 790 mm Stone dimensions, diameter x width x hole diameter: 355 x 40 x 127 mm Spindle speed: 1450 rpm Z-axis handwheel feed rate: 0.001 mm Z-axis handwheel one revolution: 0.5 mm Automatic downfeed precision (rate): 0.005~0.05 mm (8 steps, electronically selectable) Z-axis feed speed: 230 mm Hydraulic motor power: 2.2 kW Dust collection motor power: 550 W Coolant motor power: 90 W Y-axis (vertical) motor capacity: 90 W Z-axis (cross feed) motor capacity: 4 Nm servo Overall dimensions: 3600 x 2600 mm Dimensions (L x W x H): 2790 x 2225 x 2195 mm Net weight: 2850 kg Gross weight: 3150 kg

Year of construction: 1994, condition: used, machine/vehicle number: RX 1020 FF 4C - 146.2048.4, We are offering this used PULSARR (Best / TOMRA) RX 1020 FF4C optical sorting machine, including a vibratory infeed conveyor, manufactured in 1994. Ledpsy Tzf Iofx Akuehg Manufacturer: PULSARR (BEST / TOMRA) Year of manufacture: 1994 Machine number: 94014 Serial number: 146.2048.4 Type: RX 1020 FF4C Working width: 1200 mm Up to now, the machine has been used to sort potato cubes of 10 x 10 x 10 mm. Capacity: 3.5 - 5 t/h. Foreign objects and black spots were sorted out. In July 2007, the machine received a Pollux computer upgrade! (equivalent to the current Genius model) Then, in 2015, the Pollux software was upgraded again. This means that the frame and conveyor belt remained, but the complete camera optics and the majority of the control system were replaced with the latest technology, which corresponds to the successor model, the Genius. The machine has been cleaned, visually refurbished, and faulty electronic components have been professionally replaced. The machine has been stored for approximately 3 years. Our offer refers to a used machine including a vibratory infeed conveyor, without any warranty, and without installation or commissioning. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1971, grinding length 700 mm grinding width 500 mm Magnetic table 700 x 500 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Ljdpfjy T Sbyox Akujhg Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2001, XYZ 1224 Surface Grinding Machine Electro Magentic Chuck 304 x 609mm Max. Longitudinal Grinding Length 609mm Max. Cross Grinding Length 304mm Max. Distance from Table Surface to Spindle Centre 508mm Max. Longitudinal Hydraulic Travel 660mm Longitudinal Travel Variable 5 – 25m/min Cross Travel Automatic Increment 0.1-10mm Cross Travel Automatic Travel 304mm Cross Feed Handwheel Per Revolution 5mm Cross Feed Handwheel Per Graduation 0.02mm Down Feed Handwheel Per Revolution 2mm Down Feed Handwheel Per Graduation 0.01mm Spindle Motor Speed 3000rpm 50Hz Spindle Motor Power 5hp Hydraulic Motor Power 1Hp Standard Wheel Dia. 355mm Standard Wheel Width 38mm Stand Wheel Bore 127m Machine Weight 1700kgs Foot Print (LW) 3550 x 2550mm Supplied with: 2 Grinding Wheels Balancing Unit Coolant & Dust extraction Toolbox Hydraulic Tanks Diamond Wheel Dresser 415V Electrics Machine Pads & Levelling Bolts Low Volt Work Lamp For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79197 Machine Serial Number: 134046 Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Ljdpfx Akoy R N Aisuohg

Condition: used, Year of construction: 1990, grinding length 600 mm grinding width 375 mm workpiece height 350-375 mm Lhsdpfx Ajy Tpqrjkujg

Condition: used, turning speed range - grinding spindle 4500 U/min max diameter of the vice bore 17,5 mm max. radius to grind max. 10 mm max. lateral adjust. of milling cutter 10 max. longitudinal adjust. of milling cutter 40 max. angle for relief grinding 45 Grad weight of the machine ca. 125 kg Operating instructions available including collet set, grinding wheel flange wrench and the following special accessories: - Aluminium oxide grinding wheel Lsdpfx Aowlvrgokushg - 3 diamond grinding wheels, different versions - 1 additional grinding wheel holder with diamond grinding wheel - Dressing diamond - Grinding dust cover

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Lhedpfxoy Twfwe Akuog Control cabinet: 3400 x 600 x 2400 mm

Condition: used, Year of construction: 1974, mechanical ja centre distance 2000 mm weight of the machine ca. 7,9 t Lhsdpfx Aksy Ty Rpjujg

Condition: used, Year of construction: 1974, mechanical ja centre distance 2000 mm weight of the machine ca. 7,9 t Lodpfx Aey Ty Rijkuohg

Condition: used, Year of construction: 1970, mechanical ja centre distance 2000 mm Lhjdpfx Ajy Ty N Sskusg weight of the machine ca. 7,9 t

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 375 mm Additional information CNC Precision Surface and Profile Grinding Machine Grinding area: 600 x 400 x 375 mm Grinding spindle motor: 3.7 kW Table drive: hydraulic Cross-axis drive: electromechanical Grinding wheel: 300 x 50 x 76.2 mm Peripheral speed: 10 - 32 m/s Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar With mud box Machine light Lhedpfxsy Tt Hqo Akusg Grinding wheel flanges

Year of construction: 2014, condition: like new (used), functionality: fully functional, Unique bending roll machine with servo drive, fully CNC controlled. Ledpfx Akjy S Sx Asujhg

Condition: excellent (used), Year of construction: 1979, Kapp AST‑305B – Technical Specifications Machine type: automatic hob and gear cutter sharpening machine Year of manufacture: circa 1979 Machine function: resharpening of hobs, spiral or straight gash cutters; wet or dry grinding Maximum tool diameter capacity: 12 inches (300 mm) Maximum tool length between centers: 27 inches (700 mm) Maximum table traverse: 21.56 inches (550 mm) Maximum grinding wheel diameter: 12 inches (300 mm) Maximum center height: 6.1 inches (155 mm) Table speed (infinitely variable): – deep grinding: 30 to 1000 mm/min – surface grinding: 3 to 16 mm/min Flute lead angle range: 0° to 45° Lhjdpfxswwkt Ae Akueg Flute lead range: selectable, up to 24‑inch to zero or 12‑inch to zero Grinding spindle speed: 2200 rpm (optional 1000–4000 rpm) Axial grinding spindle adjustment: 16.54 inches (420 mm) Vertical grinding head adjustment: 11.81 inches (300 mm) Spindle taper: Morse 4 or steep taper 40 Preselectable single in-feed: range 0 to 9999 (units) Machine dimensions: length 118 in × depth 82 in × height 93 in (≈3000 × 2080 × 2360 mm) Machine weight: approximately 7,500 lbs (3,000 kg) Control system: originally manual/analog, often upgraded with Allen‑Bradley PLC

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technische Details Werkstückdurchmesser 1000 mm Werkstückgewicht - kg Werkstückhöhe - mm Steuerung Schleifspindelmotor 11 kW Gesamtleistungsbedarf 25 kW Maschinengewicht ca. 6500 kg Raumbedarf ca. 4100 x 3200 x 2600 mm Zusatzinformationen Maschine kommt aus einer Betriebsschließung Ausstattung: Kühlmitteleinrichtung 500 Liter mit Papierbandfilter 4 Stück Schleifscheiben (3 Stück unbenutzt) Technische Daten: Rundtischdurchmesser 800 mm Lsdjy Tlrrepfx Akushg Max. Abstand Rundtisch zu Schleifspindelmitte 850 mm Schleifscheibendurchmesser 400 mm Schleifscheibenbreite 80 mm

Condition: used, Year of construction: 2011, Maximum grinding length: 1200 mm Maximum grinding length with table dresser: 1000 mm Maximum grinding width: 600 mm Grinding height (table to underside of grinding wheel): 550 mm Table load with magnetic chuck: 975 kg Table load without magnetic chuck: 1200 kg Table speed: 1 - 40 m/min Grinding spindle Motor spindle: 11 kW Grinding wheel: 406 x 152.4 x 100 mm Speed: 1400 rpm Longitudinal axis (Z-axis) Rapid traverse: 5 m/min Adjustable feed: 1 - 50 mm Continuously variable feed: 0 - 2000 mm/min Smallest infeed: 0.001 mm Vertical axis (Y-axis) Rapid traverse: 1.5 m/min Smallest infeed: 0.001 mm Space requirements approx.: 4450 x 2935 x 2540 mm Total weight approx.: 6700 kg Equipment: - Electro-permanent magnetic chuck 1000 x 500 mm incl. electronic control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l – delivery rate 100 l/min - Static frequency converter incl. automatic dressing compensation - Complete extraction system - Siemens control with electronic handwheel Lhedpfx Akoxhdz Eeusg - Various accessories, 2 flanges and 5 grinding wheels

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technische Details Innendurchmesser 800 mm Schleiftiefe 500 mm Umlaufdurchmesser 850 mm Gesamtleistungsbedarf kW Maschinengewicht ca. 6,4 t Raumbedarf ca. m Zusatzinformationen Gebrauchte Innenrundschleifmaschine mit Stirnschleifeinrichtung in Sonderausführung mit vergrößertem Umlaufdurchmesser und erweiterter, hydraulischer Querverschiebung Rekonstruiert und modernisiert 1995 im Herstellerwerk Glauchau, Inbetriebnahme 1996 Lhjdpfx Akoy Tlngsueg 1. TECHNISCHE DATEN 1.1 Arbeitsbereich Schleifdurchmesser im Werkstückschutz Innenschleifen, min./max. 30/630(800) mm Außenschleifen, max. 800 mm Schleiftiefe, bis etwa 500 mm Tischhub 800 mm Werkstückdurchmesser, max. 800 mm Umlaufdurchmesser im Werkstückschutz, max. 800 mm ohne Werkstückschutz, etwa 850 mm Abstand vom Werkstückspindelkopf bis Schleifspindelträger, max. 1225 mm Verstellung der Innenschleifeinrichtung auf dem Tisch, max. 545 mm 1.2 Werkstückspindelstock Querverschiebung, max. 650 mm Querverstellung über Getriebemotor und Positioniereinrichtung mit HEIDENHAIN Digital-Positionsanzeige Schwenkung, max. 15 Grad Werkstückspindel Drehzahlen 16/22/32/45/63/90/125/18/250 U/min Belastbarkeit, max 1000 Spindelkopf (mit Bajonettflansch) DIN 55021 Größe 11 Ausstattung und Zubehör: 2-Achsen Digitalanzeigen Fabrikat HEIDENHAIN Kühlmittelanlage mit Magnetabscheider Fixatoren (Maschinenschuhe) Diverse Schleifscheiben Diamantabrichter Große Planscheibe Innen und Planschleifeinrichtung Halogen Maschinenlampe Maschinendokumentation