Used Optimat Edgebander With Corners for sale (3,127)

Condition: used, Year of construction: 2017, power: 20 kW (27.19 HP), edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, The machine has the following configuration: Pre-milling unit End-capping unit Number of motors in end-capping unit: 2 Rough milling unit, top and bottom Number of motors in rough milling unit: 2 Edge rounding unit Number of motors in edge rounding unit: 2 Edge trimming unit Glue application unit Edge finishing unit Number of motors in edge finishing unit: 2 TECHNICAL DETAILS Workpiece processing Min. board thickness: 8 mm Max. board thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 20 m/min Fsdpszmtldefx Akhogf MACHINE DETAILS Total connected load: 20 kW EQUIPMENT Preheating lamps for workpiece sides Edge roller magazine Glue reservoir for EVA hot melt adhesive Spray unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7981

Condition: used, Year of construction: 2008, power: 41 kW (55.74 HP), edge thickness (max.): 3 mm, controller model: ICOS OPEN, The machine has the following configuration: Pre-milling unit Fedpfx Aezmtkaekhogf Manufacturer model: R3 L20 Engagement control: Automatic, time-controlled Motor power: 4 kW Speed: 9,000 rpm Edge processing Number of edge processing units: 10 Crosscut saw unit Manufacturer model: 8.42/39/B Number of motors: 2 Motor power: 0.6 kW Speed: 12,000 rpm Flush trimming and rounding unit Manufacturer model: 08.055 Number of motors: 0.6 (?) Motor power: 1 kW Speed: 12,000 rpm Corner rounding unit Manufacturer model: 08.342 Number of motors: 2 Motor power: 0.66 kW Speed: 12,000 rpm Scraper blade unit Manufacturer model: 08.50 Belt sanding unit 1 Manufacturer model: 08.62 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 2 Manufacturer model: 08.062 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 3 Manufacturer model: 08 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 4 Manufacturer model: 08.617-2 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 5 Manufacturer model: 08 Processing unit 10 Manufacturer model: 08.190 Motor power: 4.5 kW Speed: 9,000 rpm TECHNICAL DETAILS Workpiece dimensions Max. panel height: 60 mm Min. panel length: 130 mm Min. panel width: 65 mm Edge material Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm Feed Max. feed rate: 30 m/min Pressure: Rubber belt Number of panel sizing/milling units: 1 MACHINE DETAILS Control system: ICOS OPEN Total connected power: 41 kW EQUIPMENT Number of panel sizing/milling units: 1 Lamps for preheating the panel side Edge roller magazine with 2 positions PUR pre-melting unit Pressure roller set with 5 pressure rollers Spraying unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 5657

Condition: used, Year of construction: 2014, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Workpiece Dimensions Min. panel height: 10 mm Max. panel height: 60 mm Min. panel width: 70 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 18 m/min Feed and Guidance Pressure with idler rollers Panel support guides Unit for Panel Processing Pre-milling unit Automatically timed engagement Motor power: 2.2 kW Edge Gluing Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system: AIRTEK Number of pressure rollers: 4 NC-controlled Edge Processing Units Number of edge processing units: 7 End-capping unit Number of motors: 2 Motor power: 0.35 kW Fine milling unit for flush trimming and rounding Number of motors: 2 NC-controlled Motor power: 0.55 kW Corner rounding unit Fgsdpfxozmtive Akhef Manufacturer model: WD60 Motor power: 0.35 kW Rough milling unit Motor power: 3.5 kW Edge trimming unit NC-controlled Glue application unit Polishing unit Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Control and Safety Machine programming software: PowerControl PC20 Safety standard: CE marking Electrical Data Total connected load: 22 kW EQUIPMENT Pre-milling unit Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system AIRTEK 4 pressure rollers End-capping unit Fine milling unit for flush trimming and rounding Corner rounding unit WD60 Rough milling unit Edge trimming unit Glue application unit Polishing unit Spray unit Machine programming software PowerControl PC20

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Fgedpfx Aey In A Nekhef

Condition: used, machine/vehicle number: 008494, Position 1: Single Edgebanders HOLZHER-LUMINA + MASTER 5510 Fgedpjzbxznefx Akhjf Position 2: Panel Return Systems HOLZHER-LUMINA + MASTER 5510

Condition: used, machine/vehicle number: 008132, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Fedpow Idc Rsfx Akhsgf Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Fedoqy Em Tepfx Akhogf

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Fgedpfx Ajwuz Ekokhsf Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Lateral horizontal groups: yes Fsdpowuz S Defx Akhegf

Condition: used, machine/vehicle number: 008109, Type of edging: Thin edge, Thick edge, Solid wood Fjdpfx Aksw Idc Dshegf Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 12 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Fgjdjy In Dgopfx Akhef Operating Units: 8 nr

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Fjdpfx Aoy In A Ajkhegf Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, GS Mach approx. 6.5" extruder with Water Ring Pelletizer, with Water Ring Pelletizer, spin dryer, screen changer, and hopper, includes all control panels, 177 HP, 3 phase motor, also includes Color Feeder, in working condition, winning bidder responsible for proper disconnection and removal. Fedpfxexd D Nns Akhogf

Condition: new, Year of construction: 2025, functionality: fully functional, With a grinding diameter of 200mm x 300mm long, the JHP-2003CNC is the most compact plunge type grinding machine in the range and utilises the FANUC Oi-TF CNC control. Designed for heavier grinding applications, the JHP-2003CNC can accomadate workholding and components to 80kgs. This fully enclosed machine is supplied with Renishaw probing, full machine enclosure and mist collector. Jainnher CNC Plunge Cylindrical Grinding Machine Description: JHP-2003 CNC Fsdpfxenxk N Ss Akhegf Capacity Max ø work swing 200mm dia Max grinding length 300mm Max grinding dia. 200mm dia Max workpiece weight 80 kgs Distance between centres 300mm Centre height 100mm Grinding wheel Grinding wheel size Ø405 x 50 x 127 Max peripheral 33 m/sec Wheel speed 1780rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 220mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Hydrodynamic pressure ----- Tailstock Retraction of sleeve 30mm Sleeve diameter D:48mm Centre taper MT.3 Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Centre taper MT3 Spindle type Cartridge type Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +10º/-3º Rapid traverse speed 8mm/min Max. travel 640mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 5HP 4P(opt. 7.5HP) 4P Workhead motor 1.0KW Work table (Z axis) 1.2KW Work table (X axis) 1.2KW Hydraulic pump 1/4 HP 4P Wheel head pump ----- Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 30L Wheel head lubrication ----- Coolant tank 80L Machine N.W (Fully enclosed) 3800 kg G.W (Fully enclosed) 4100 kg Dimension (Fully enclosed) 3300 x 2100 x 2200mm Packing (Fully enclosed) 3500 x 2200 x 2200mm Jainnher CNC Plunge Cylindrical Grinding Machine Standard Accessories: JAINNHER JHP-2003CNC X-axis linear scale Work lamp Foot pedal Angle adjustment gauge Hydraulic tailstock with manual movement Grinding wheel and flange Tungsten carbide tipped centres (MT3) Automatic lubrication system Diamond dresser at lower worktable Magnetic separator MC-40/coolant tank/pump Levelling bolts and blocks Tool kits and toolbox Fully enclosed splash guard & oil mist device Touch probe gauge (Renishaw) Transformer

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. Fsdjzrg T Ejpfx Akhsgf *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: used, mileage: 1,072,400 km, power: 427 kW (580.56 HP), first registration: 04/2015, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 8x4, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: air, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, parking heater, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Digital tachograph - Lift axle - Refrigerator - Air suspension - Power take-off (PTO) - Radio/CD player - Sleeper cab - Sun visor - Tow hitch = Further Information = Technical Information Number of cylinders: 8 Engine displacement: 16,353 cc Axle Configuration Suspension: Air suspension Front axle 1: Tire size: 385/65 R 22.5; Steerable; Tire tread depth left: 25%; Tire tread depth right: 25% Front axle 2: Tire size: 315/80 R 22.5; Dual tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Reduction: single reduction Rear axle 1: Tire size: 315/80 R 22.5; Dual tires; Tire tread depth left inner: 35%; Tire tread depth left outer: 35%; Tire tread depth right inner: 35%; Tire tread depth right outer: 35%; Reduction: single reduction Rear axle 2: Tire size: 385/65 R 22.5; Steerable; Tire tread depth left: 50%; Tire tread depth right: 50% Weights Unladen weight: 16,610 kg Payload: 15,390 kg GVWR: 32,000 kg Functional Crane: KESLA 2112 Z, year of manufacture 2015, mounted at the rear of the chassis Fedpfsztpgdjx Akhjgf Condition Damage: none

Condition: used, axle configuration: 3 axles, first registration: 07/1990, total length: 13,750 mm, total width: 2,500 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 8,900 mm, Year of construction: 1990, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tire size: 385/65 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 20%; Tire tread depth right: 20% Rear axle 2: Tire tread depth left: 20%; Tire tread depth right: 20% Rear axle 3: Tire tread depth left: 20%; Tire tread depth right: 20% Weights Unladen weight: 8,300 kg Payload: 30,700 kg GVWR: 39,000 kg Functional Fjdpfxoztb Hio Akhegf Height of the loading platform: 120 cm Condition Damage: none Identification License plate: OH-48-HR

Condition: good (used), Year of construction: 2008, Built in: 2008 Size: max 320 x 320 mm; min 150 x 145 mm Cover size: max 660 x 320 mm; min 225 x 135 mm Book block thickness: max 65 mm Weight: 2,100 kg Cover thickness: 80-300 g/qm Pile height: max. 150 mm Speed: max 1,350 c/h Type of current: 400/50 V/Hz Overall dimensions: w x h x l 3.610 x 2.910 x 1.80 mm Fgodpfx Akou R Hxgshjf Equipment perfect binder: - 4 clamps - milling station with pressing roller - hotmelt spine gluing unit - hot melt side gluing unit - PUR gluing unit - Premelter for PUR gluing unit .

Condition: good (used), mileage: 252,294 km, power: 235 kW (319.51 HP), first registration: 08/2016, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 4,200 mm, loading space width: 2,430 mm, loading space height: 600 mm, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, power mirror, trailer coupling, = Additional Options and Accessories = - Leaf spring suspension - Remote-controlled central locking - Tilting hydraulics - Radio/CD player - Sun visor - Toolbox - Power take-off (PTO) - Power take-off (PTO) - Tow hitch = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Suspension: Leaf spring suspension Front axle: Steerable; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle: Double-tired; Tire tread depth left (inside): 80%; Tire tread depth left (outside): 80%; Tire tread depth right (inside): 80%; Tire tread depth right (outside): 80%; Reduction: External planetary axles Weights Unladen weight: 11,050 kg Payload: 7,950 kg GVW: 18,000 kg Functional Crane: Palfinger PK 13001 K, year of manufacture 2016 Condition Fodpoztaazjfx Akhjgf Technical condition: good Visual condition: good Product Safety EU responsible: Gerrit Haverhoek, Zweedsestraat 6, 7418 BG Deventer

Condition: excellent (used), color: other, Year of construction: 2004, Technical condition: very good Visual appearance: very good Fjdpfxszr Hp Tj Akhogf

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming REVAMPED AS NEW Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands Fgodpfx Aksy Uhxkohsf - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: used, Year of construction: 2020, functionality: fully functional, operating hours: 380 h, power: 6.7 kW (9.11 HP), input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 9 m/min, total height: 1,636 mm, total length: 3,731 mm, total width: 720 mm, overall weight: 950 kg, Equipment: CE marking, documentation/manual, We are offering this used OAV MAX 370P edge gluing machine, manufactured in 2020. Model: MAX 370P Motor power: 6.7 kW Voltage: 400 V Current: A Phase: 3 PH Frequency: 50 Hz Date of manufacture: 03.2020 Serial number: 20030001EB/P1 Fsdjzrl Izjpfx Akhsgf Including: - Pre-milling cutter. - Miter saw. - Radius milling cutters, top and bottom. - Corner rounding. - Radius scrapers. - Cleaning brushes. If you have any questions or would like more information, please feel free to call or email us. The machine can be seen in operation.

Condition: used, Year of construction: 2012, functionality: fully functional, Feed rate: 10–18 m/min Fjdpfjztal Rjx Akhogf Workpiece length: min. 160 mm Workpiece width: min. 60 mm Workpiece thickness: 8–60 mm Cutting thickness: 0.4–8 mm

Condition: used, Year of construction: 2006, functionality: fully functional, Working width: 1350 mm Workpiece thickness: 3 - 160 mm Abrasive belt width: 1370 mm Fjdpsztac Ajfx Akhjgf Abrasive belt length: 2150 mm Drive motors: Unit 1: 15 kW Unit 2: 7.5 kW Total connected load: approx. 28 kW

Condition: ready for operation (used), Year of construction: 2016, This 4-axis HOMAG OPTIMAT BHX 200 was manufactured in 2016. It features a rigid steel frame construction and dust-protected linear guideways, ensuring durability and precision. The machine is equipped with digital servo drives and offers rapid traverse speeds of up to 50 m/min on the X/Y axes. If you are looking to get high-quality CNC processing capabilities, consider the HOMAG OPTIMAT BHX 200 machine we have for sale. Contact us for further details. • Measurements width: 50-1,250 mm • Rapid Traverse: X/Y axes: up to 50 m/min; Z-axis: up to 15 m/min • Main electronic connection: 400 V / 50 Hz • Used Vertical CNC Machining Center • Year of manufacture: 2016 • Rigid steel frame construction • Dust-protected linear guideways Fgodozr Ndgopfx Akhjf • Digital servo drives on X, Y, and Z axes • X-axis driven by rack and pinion • Y- and Z-axes driven by ball screws • Maintenance-free servo motors with high-resolution encoders • Integrated dust extraction system for machining units • Additional dust extraction connections • Manual loading and unloading of workpieces • Pneumatic positioning stop • Workpiece length: 200-3,050 mm (with roller conveyor) • Workpiece thickness: 8-80 mm • Air-conditioned electrical cabinet for operation above 35°C • ECO Plus energy-saving mode with automatic standby, drive shutdown, and control system shutdown • The technical data and descriptions are copies of the order confirmation at the time • The information is for informational purposes only and is not binding