Used Osro Round Vibrator for sale (5,840)

Condition: new, Year of construction: 2025, functionality: fully functional, The weighing system is also designed for mixing up to 4 products. Each of the 4 units can be programmed individually. The system can be tested at our test center, 20 km from Frankfurt am Main. Rjdpoya Ahvsfx Alaecf Features - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing: coarse/intermediate/fine dosing, each programmable individually - Tool-free format changeover Technical data - Weighing range: 20g to 4000g - Accuracy: up to 0.5g, depending on product - 6-liter weighing hopper - Max. speed: 60 weighing cycles/minute - Weight: 240kg - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A

Year of construction: 2000, condition: ready for operation (used), A hydraulic 4-roll plate rolling machine Promau (Prümau) is available. Working width: 3000mm, bending capacity: 13mm, pre-bending capacity: 10mm, rolls: 4. An on-site inspection is possible. Rcodpfozhw Tusx Alaof

Year of construction: 2011, condition: ready for operation (used), An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible. Rsdpfsydd Acsx Alaecf

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Rcedpfx Aet Akt Rslaof Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, roller (bottom) diameter: 160 mm, roller (top) diameter: 175 mm, side roll diameter: 135 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness (max.): 7 mm, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: centralized greasing system, cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Electronically Controlled, Electrohydraulic Four-Roller Plate Bending Machine Manufacturer: FACCIN, Model 4 EDL 1617 Technical Specifications: Number of rollers: Four Geometry of side rollers: Linear guides Working width: 1500 mm Top roller diameter: 175 mm Bottom roller diameter: 160 mm Side roller diameter: 135 mm Pressing force against top roller: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full working width): 7 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 875 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for roller rotation Extra heavy-duty, double-support swing bearing Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens PLC control system Rcjdswwt Ddepfx Alaof Electric drive for top roller for increased efficiency Safety trip wire with emergency stop and CE certification Centralized lubrication Cone bending device Optional Equipment Included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, TECHNICAL SPECIFICATIONS: Number of rolls FOUR Geometry linear guides Maximum plate width mm 3000 Rcodpsgd T R Djfx Alajf Top roll diameter mm 390 Bottom roll diameter mm 370 Side rolls diameter mm 295 Installed power HP 40 Stepless variable rotation movement m/1' 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield point 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Bending performance (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Bending performance (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting

Condition: good (used), functionality: fully functional, Sturdy, mobile roundwood and timber cross conveyor. Equipped with 5 chain strands. Electric drive for mobility. Rodpfxszum Uuo Alajcf Track width 1.60 m.

Condition: excellent (used), CATALOG NUMBER 7753 TECHNICAL DATA - max diameter of processed dowels: 130mm - installed sleeve: 110mm - max diameter of input material: 160mm - min length of input material: 800mm - max machining allowance per side: 15mm Rcedszulqnepfx Alaof - knife head drive motor: 15kW - 3 feed speed options + forward/reverse - feed motor: 1.1kW Configuration: - 3 toothed infeed rollers - 3-knife head - 3 smooth outfeed rollers - dimensions (L/W/H): 3100x1400x1500mm - weight: 2100kg ADVANTAGES – Made in Poland – 3-knife head – Used dowel lathe, in very good condition Net price: 32,900 PLN Net price: 7,830 EUR (conversion at 4.2 PLN/EUR) (Prices may vary with greater exchange rate fluctuations)

Condition: used, Year of construction: 2017, controller model: NEXUS, _____ Description: Year of manuf. : 2017 Material thickness : 14 mm Technical data Working length:3,100 mm Bending capacity / Folding capacity:14 / 12 mm Upper roll diameter:290 mm Lower roll diameter:270 mm Side roll diameter:210 mm Main motor power:7.5 kW Machine length:4,475 mm Machine width:1,460 mm Machine height:1,520 mm Machine weight:8,000 kg Control system:NEXUS TouchScreen DNC equipment :- NEXUS DNC control system with touchscreen interface :Programming and operation options: Rodpfxezuikxe Alajcf :1. Manual mode – all movements controlled via joystick :2. Teach-in mode – saving of positions :3. Input of values for the rollers via the screen :Storage capacity for 300 programmes : :- Rollers made from C45 alloy steel, induction-hardened :to 50–55 HRC : :- Conical bending unit with both :side rollers set at an angle, lower roller set at an angle and :bearing with hardened guide roller : :- Calibration unit for re-rounding :welded tubes : :- Brake for the upper roller for greater precision when :positioning the material.

Condition: excellent (used), functionality: fully functional, Zechini book spine rounding machine 50 cm working width, very robust and compact machine Electrically adjustable feed table Rcjdszuxbmjpfx Alaof Electrical connection 400V/50Hz, approx. 200 kg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, PRICE REDUCED AGAIN!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. This would certainly be of interest to motorsport and tuning companies. Rodszcqy Eepfx Alaocf The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is set up, except for the computer, which is a newer, smaller-form-factor HP model. Max. diameter: 350mm Max. test piece height: 500mm (higher measurements are possible, up to a maximum of 1000mm when measured in two halves...) Self-centering of the workpiece: +/- 5mm Max. weight of test piece: 40 kg The system has been used very little and has had only two owners. The first owner, from whom I purchased it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password...). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. There is also a sample/sample lens (hemisphere) for calibration! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! The system will be shipped on two Euro pallets using a freight carrier. It is already securely fastened to the pallets. The Talyrond 265 and the desk will be well-protected with bubble wrap, etc., and secured with stretch film for transport. The system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during assembly and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system could be damaged when it starts up. A truly well-maintained, very accurate system that will provide excellent service for many years to come!!

Condition: good (used), Year of construction: 2021, Lifting strap, lifting belt, crane strap, lifting sling, round sling, double woven hose -Manufacturer: SHZ, Round sling with double jacket | EN 1492-2 -Type/Loading capacity: WLL 10,000 kg SF 7 -Length: 3.0 m -Circumference: 6.00 m -Quantity: 7x round slings available -Price: per piece -Transport dimensions: Ø 500 x 100 mm Redpfxjzrl Iuo Alaecf -Weight: 5.6 kg/pc.

Condition: good (used), functionality: fully functional, Year of construction: 2007, 9000 seedlings, large pick-up attachment, rotary feeder, netting tie. Rcjdpfszr D Rbox Alaof

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! Rodpozwvqqefx Alaocf *Installation and Operator Training FREE Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. • Model: FABO TE-2060 • Type: Vibrating Screen • Size: 2000 x 6000 mm • Deck size: 2-3-4 • Motor: 22 kW Bearings: Heavy duty SKF-FAG • Capacity: 180-220 TPH • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. • Model: FABO TE-1650 • Type: Vibrating Screen • Size: 1600 x 5000 mm • Deck size: 2-3-4 Rcedezwvpyjpfx Alasf • Motor: 15-18,5 kW Bearings: Heavy duty SKF-FAG • Capacity: 100-130 TPH • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Rcjdjuzn Nnepfx Alasf Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Robust cross-conveyor for round timber For sale is an extremely robust cross-conveyor for logs, taken from a professional sawmill operation. Features: Heavy-duty industrial design Double chain conveyor Short conveying distance Fast and reliable transport of round timber to the log carriage Rodpfxjzq T Adj Alajcf Solid and durable steel construction Immediately available The system is in good, functional condition and can be inspected under power by appointment. Please submit a fair and realistic offer.

Condition: used, The used adjustable rounding cutter from Leitz is a cutting tool for professional woodworking. It is suitable for creating and machining rounded profiles on the top and bottom of wooden workpieces. The adjustable design supports flexible routing tasks in various applications. Rsdszr I Tmepfx Alaocf Technical data: - Blades: Z4 - Cutting circle (ø): 155.5 mm - Bore: 40 mm - Marking: MEC - Length: 2 x 35 mm - Material: Steel, aluminium

Condition: refurbished (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, Honing: R 220 euro R 220 EC R 420 EC R 620 R 360 So DL R185 EC-KF Rcc4 Set Blasting: RSKI 1000 RSKI700-3d-atex RT 250 euro Rjdpfx Aljwfdbcjaocf AM: C1 M1 M1 Basic S1 S2 In addition to the machines mentioned and shown, we have many other machines and accessories (blasting systems, conveyors, and small machines) available in stock. The machines can be purchased or rented. Contact us for (free) advice on honing, drum and blasting technology.

Condition: used, Technical data: - Cutter: HW - Cutting diameter (ø): 157 mm - Bore: 35 mm - Length: 30 mm Rcodpezryh Aefx Alaef - Material: Steel

Condition: excellent (used), CATALOGUE NUMBER 8015 TECHNICAL DATA - Range of diameters of processed pins: 40-140mm - Max. diameter of input material: 210mm - Min. length of input material: 600mm Rjdpfxoztafke Alaocf - Max. machining allowance per side: 30mm - Fitted sleeve with a diameter of 100mm - Cutting head drive motor: 18.5kW - Feed: + forward/backward - Feed motor: 3.73kW In sequence: - Infeed trough - 6 toothed draw rollers - 4-knife cutting head - 6 smooth draw rollers - Dimensions (L/W/H): 2600x1200x1390mm - Weight: 1700kg ADVANTAGES - Polish production - DTR documentation - Used turning machine, very good condition Net price: 49900 PLN Net price: 11880 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), Year of construction: 2011, 513 USED Line for ciabatta, square and round loaves. Features: - 3-row rounding, - additional rounding drums, Redozugm Djpfx Alaecf - grain sprinkling. TECHNICAL DATA: - Year of production: 2011 The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 2000, Offer 26018 Rcsdpeykp A Iofx Alajf Technical specifications: - Max. working length: 500 mm - Max. sheet thickness: 1.5 mm - Various roller diameters - Drive – brake motor: 400 V / 4.0 kW - Required space (approx.): W 850 x D 1700 x H 1250 mm - Weight (approx.): 0.8 t - Roller attachments: 42; 45; 50; 55; 60; 65; 70; 90; 135 mm

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical specifications: - Bending and rolling processes performed manually, - Max. working width: 1020 mm Rcedef S Tg Topfx Alaof - Max. material thickness (St 40): 1.25 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of the upper die: approx. 85 mm - Max. adjustability of the bending die: 20 mm - Shaft diameter: 55 mm - Upper shaft can be pivoted outwards - Rear shaft can be adjusted parallel and at an angle - Space requirement: approx. W 1500 x H 1400 x D 750 mm - Weight: approx. 400 kg

Condition: good (used), APPLICATION BELT with VIBRATING feeder Used machine Rsdotp Hd Uspfx Alajcf A pneumatic slide valve from the vibro-feeding roller controls the dosing onto the application belt Overall dimensions: 2700 x 1300 x 2800 mm Strap size 2400 x 140 mm Throat size: 1000 x 1300 mm Transport speed: 15 m/min