Used Pionier Ona for sale (1,374)

Condition: used, table dimensions 500 x 1.200 mm number of T-slots 30 distance t-slots 125 mm distance spindlenose to table 110 - 760 mm Swing radius 535 - 1.135 mm boring range 600 mm work height max. 800 mm quill stroke 200 mm Height adjustment of the drill head 450 mm no. of turning speeds 18 Bjdpfxsy Umg Tj Af Hswn turning speed range 35 - 1.800 U/min bore capacity in St 60 - in full material Ø40 mm bore capacity in GG 22 - in full material Ø50 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: ready for operation (used), DONAU DR 23 - High-speed radial drilling machine Bwsdsy Uv Tvepfx Af Hen - Drilling capacity / steel approx. 28 mm - Arm length 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm (gearbox) - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Subject to errors and omissions.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baler Presona LP 85 VH2 with cross tying, year of construction 2018 Technical data: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of construction: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput: 1,200 cbm/h Bwedpfsyz Snpjx Af Hen Throughput at 30–100 kg/cbm: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2,000 L Transport dimensions of press: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg The baler was dismantled from running operation. Technical documentation is available. Please note: All technical data is based on manufacturer’s specifications. We accept no liability for the accuracy of the information provided or for possible errors. The offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, payment in advance, without warranty or guarantee.

Year of construction: 2015, condition: good (used), Steam convection oven, RATIONA SCC WE 201 convection oven Bwsdpezaw Rxofx Af Hsn * For 20 GN trays * Steam cooking mode from 30°C to 130°C * Regeneration function * Convection / dry heat: temperature range between 30°C and 300°C, 0–100% maximum humidity. * Temperature probe * Automatic cleaning with tablets

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, working width: 800 mm, workpiece height (max.): 150 mm, Hello, we are selling a production line for hammering stone slabs with a maximum width of 800mm. The package also includes a Donatoni reinforcement mesh remover for the back side of the slabs. The line is still operational and can be tested. We will dismantle the machine in January 2026. Loading onto truck is included. Bsdpfxox Afp Hj Af Hewn

Condition: excellent (used), Wild Heerbrugg M3 – professional stereo microscope I am offering a high-quality stereo microscope from the renowned Swiss company Wild Heerbrugg. This device is suitable for use in laboratories, quality control, electronics, jewelry making, watchmaking, and precision work. Technical specifications: • Manufacturer: Wild Heerbrugg • Model: M3 • Country of manufacture: Switzerland • Binocular head • Focus adjustment • Sturdy laboratory stand Bjdpszagapofx Af Hswn • High-quality optics Condition: Used item. Visually in good condition, with normal signs of use. Sold exactly as shown in the photos.

Year of construction: 1998, condition: used, Technical details: total power requirement: 1,1 kw volume capacity: 900 m³/h filter surface area: 6,0 m² filter: 1 Stück Bjdpfsu N Ad Nox Af Hjwn weight of the machine approx.: 125 kg dimensions L x W x H: 0,74 x 0,62 x 1,8 m Applications: Suction of grinding dust, with other filter inserts is also welding smoke extraction possible - mobile device with rolls - with collecting container for coarse particles - cleaning interval adjustable up to 60 sec - Impulse cleaning, automatically after switching off the system - filtering separator Further technical data: - separation area 6.0 m² - separation rate above 99% - cleaned air remains in the working chamber - in the device is cartridge filter Ø 400mm, length 270mm - filter change manual by hand (maintenance door) *

Condition: used, Crane Hook/Pulley - lifting capacity 10 t - weight approx. 190 kg - pulleys Ø 500mm; width 58mm; rope groove 40mm - cargo hook length 420mm; hook opening 90mm; intake 110mm with safety device Only one crane hook/pulley left on sale! Bwedpfx Aeu Nvlgef Hen *

Condition: used, 4 pieces telescopic crane carrier / price per crane carrier Part for sale as spare parts Weight per telescopic arm = 0.8 to Bjdpsu Nvn Isfx Af Hswn *

Condition: used, Year of construction: 1971, Technical details: Bwsdpfx Aov Ay T Dsf Hen bore capacity in steel (diameter): 23 mm workpiece height max.: ./x. 2 mm drill capacity in cast iron: Ø 26 mm spindle taper: MK 3 bore spindle stroke: 135 (manual/automatic) mm range drill spindle revolution per minute: 7step U/min feed range: mm/U Table dimensions: 1200 x 500 mm table surface area: 1070 x 400 mm total power requirement: 3,55 kW weight of the machine ca.: 1,4 t dimension machine xH: 1,7 x 1,2 x 2,2 m Jib Length Arm: -vertical adjustment: 450mm and horizontal adjustment: 610mm -swiveling 360°, hydr. lock Right/left rotation for thread cutting with automatic switchover Operation via control panel Coolant tank with pump *

Condition: used, Year of construction: 1960, Technical details: workpiece height max.: 600 mm Arm length: ca. 700 mm Bjdpfxsx Afn Ns Af Hjwn bore capacity in steel (diameter): 25 mm Table dimensions: 1100 x 400 mm

Condition: used, Year of construction: 2007, x-travel 800 mm y-travel 650 mm z-travel 500 mm Control Heidenhain iTNC 560 Bwsdpfoy T Scwex Af Hjn spindle tunring speed 12.000 U/min In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 7001922, input voltage: 400 V, Equipped with 4 M-20iD/12L Fanuc robots. Bwodpfjy T Ulzex Af Hjn Installation dimensions: 16,000 x 4,000 x 3,400 mm.

Condition: new, Year of construction: 2026, Angle conveyor belt available in various lengths and widths, as well as speeds. - Movable on steerable stop rollers - Angle adjustable Bwodpfx Afolkdbyo Hen - Cleat height: 30 mm - Spring-supported height adjustment

Condition: new, Year of construction: 2026, functionality: fully functional, The belt conveyor, TYPE: NPS, is for sale. You can order it in various lengths and usable widths. Bjdpfxslkda Hj Af Hown - High-quality aluminum profile, anodized, with grooves - Without guide plates - Smooth PU conveyor belt, temperature-resistant from -10°C to +90°C - Mobile undercarriage, adjustable from 900 - 1300 mm - Worm gear motor 3 x 400 V 50 Hz - Constant belt speed, approx. 6.0 m/min - Motor protection switch with 5 m cable & CEE plug

Condition: new, Year of construction: 2026, functionality: fully functional, Z-type belt conveyor, type NDZ, available in various lengths and widths - High-quality, anodized aluminum profile with grooves - Rubber-coated drive roller - Aluminum side guide, 50 mm high - PU conveyor belt with cleats, 30 mm high - Mobile base frame with adjustable angle - Motor protection switch with 5 m cable and CEE plug Available upon request: - Custom dimensions - Timed operation - Frequency inverter (€485) Bsdpsg Arxvofx Af Hjwn - Wavy edge (€492)

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Bwedpey S Ru Asfx Af Hsn Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, year of last overhaul: 2026, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Bodoy S Rtlepfx Af Hjwn Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, functionality: fully functional, This is a condensation trap from the manufacturer Rational. The condensation trap is suitable for the Rational combi-steamer SCC/WE 201, 202. The condensation trap generates an accelerated rise of steam and other vapors from the ventilation pipe. Vapors and gases can thus be specifically directed via a pipeline to an extraction system. Bjdpfxoy T Icaj Af Hjwn You will receive an invoice with VAT shown. OUR USED EQUIPMENT SERVICE FOR YOU High-quality branded equipment at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional Flexible choice of shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Testing according to DGUV V3 Technical data: Dimensions: W x D x H 10 x 7.5 x 45.8 cm Weight: 1.3 kg Connection diameter: 7 cm Application: SCC/WE 201, 202 Article numbers 60.72.593 Material: Stainless steel / CNS 1.4301 / AISI 304 Condition: used SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to request a consultation or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: used, functionality: fully functional, This is a condensation trap from the manufacturer Rational. The condensation trap is suitable for the Rational combi-steamer series, iCP 61-102, SCC/WE 102 & CPC, SCC 102, 210, 202. The condensation trap creates an accelerated rise of steam and other gases from the vent pipe. Steam and gases can thus be directed in a targeted manner via a pipeline to an exhaust system. You will receive an invoice with VAT shown. OUR USED EQUIPMENT SERVICE FOR YOU: High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Testing according to DGUV V3 Technical data: Dimensions: W x D x H 10 x 7.5 x 45.8 cm Weight: 1.3 kg Connection diameter: 6.5 cm Application: iCP 61-102, SCC/WE 102 & CPC, SCC 102, 210, 202 Article numbers 60.72.592 Material: Stainless steel / CNS 1.4301 / AISI 304 Condition: used SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Bsdpsy T Ibcofx Af Hswn Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, functionality: fully functional, This is a condensation trap manufactured by Rational. The condensation trap is suitable for the Rational SCC/WE 61/62/101 combi-steamer series, as well as for CM/P 61/62/102. The condensation trap creates an accelerated rise of steam and other vapors from the vent pipe. Vapors and gases can thus be directed via a pipeline to an exhaust system. You will receive an invoice with VAT shown. OUR USED EQUIPMENT SERVICE FOR YOU: High-quality branded equipment at fair prices Professional refurbishment / inspection & expert cleaning Checked & fully functional Flexible options for shipping or self-collection Competent advice - before and after purchase Provision of operating manuals, connection diagrams & spare parts Testing according to DGUV V3 Technical data: Dimensions: W x D x H 10 x 7.5 x 45.8 cm Weight: 1.3 kg Connection diameter: 5.5 cm Application: SCC/WE 61/62/101 as well as for CM/P 61/62/102 Article numbers: 60.72.591 Material: Stainless steel / CNS 1.4301 / AISI 304 Condition: used SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Bwsdoy T Ia Ejpfx Af Hjn Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday, 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2015, condition: refurbished (used), functionality: fully functional, This is a combination oven/steamer SCC 101 from the premium manufacturer Rational, in an electric version. This combination oven/steamer is equipped with a racking system with 10 shelves. The unit has been completely overhauled in our in-house workshop, is fully functional, and comes with a 6-month warranty on all electrical parts. The base frame shown in the picture is not included in the offer but can be purchased as an option. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3 This combination oven/steamer offers space for 10 x 1/1 GN containers. In automatic mode, the appliance automatically detects the ideal cooking process, the size of the food, the quantity, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 847 x 776 x 1042 mm Power connection: V: 400 / kW: 18.6 / Hz: 50/60 Capacity: 10x1/1 GN Weight: approx. 135 kg Serial number: E11SH1508247330 Year of manufacture: 2015 Condition: used, overhauled, fully functional Further information: With care Control - self-cleaning In combination oven/steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C) Core temperature sensor Bodpsy Tu Ucsfx Af Hjwn Handheld spray gun with automatic retraction 8.5-inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease separation system Automatic start time preselection 7 cleaning levels for unattended cleaning - even overnight Humidification can be adjusted in 3 levels - from 30°C to 260°C 5 programmable fermentation levels USB interface Seamless, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors. Do you have any questions, would you like a consultation, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: ET1PA24025070612, This is an UltraVent Plus hood from the manufacturer Rational, type UV PLUS 61/101/E, year of construction 2024. For the following index series: Index H and I, also usable for DUO units or single units. This hood not only binds escaping steam, but also eliminates odors and smoke. You do not need an exhaust duct to the outside. An LED lamp automatically indicates when you need to change the filter. This version features stainless steel baffle filters, as well as a pre-filter mat located behind them. This protects the activated carbon filter (newly installed) in the hood, which serves as the core, from contamination too quickly and offers optimal functionality. This Plus condensation hood is optimal for front areas, enclosed spaces, or show cooking. Retrofitting and installation on the Rational SCC WE 61/101 can be done without great effort afterward. The hood has been tested in our in-house workshop and is fully functional with a 6-month warranty. The stated price is net plus 19% VAT. Service: We are happy to arrange a certified Rational customer service provider nationwide in Germany. Are you looking for a specific Rational device type? Ask us, we have access to an extensive range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: • 6 months warranty on all electrical parts • Quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional – or your money back • Flexible choice of shipping or self-collection • Competent advice – before and after the purchase • Provision of operating instructions, wiring diagrams & spare parts • Inspection according to DGUV V3 Technical data: • W x D x H: approx. 854 x 1226 x 628 mm • Minimum door opening dimensions for transport W x H: 845 x 850 mm • Serial number: ET1PA24025070612 • Year of construction: 2024 • Power connection: V: 200 - 240 / Hz: 50-60 • Weight: approx. 95 kg Condition: Used, tested, fully functional Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Bwjdpfx Ajwngb Rsf Hon Do you have questions, want advice, or would you like to take a look on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is exclusively under our general terms and conditions (GTC).

Year of construction: 2018, condition: ready for operation (used), A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement. Bwedey Tn Ntopfx Af Hon

Condition: good (used), Year of construction: 1998, functionality: fully functional, DONAU DANUMERIC 440, year of manufacture 1998 Technical specifications: - Table 1800 x 600 mm, 4 T-slots - Drilling radius 540 – 1590 mm - Spindle taper SK40 - Speed range 15 – 2800 rpm - Motor power 5.5 kW Bodpoy Txlrjfx Af Hjwn - Weight approx. 2,800 kg