Used Pressure Gauge -1-0 Bar / -1-0 Kp/Cm² for sale (118,890)

Condition: excellent (used), Year of construction: 1997, operating hours: 88,000 h, functionality: fully functional, overall weight: 1,200 kg, motor manufacturer: kaeser, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 690 m³/h, operating pressure: 10 bar, pressure (min.): 8 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, KAESER CS121 Screw Compressor (75 kW, 10.3 m³/min, 10 bar) KAESER CS121 75 kW, 10 bar screw compressor for sale in excellent condition. Maintained and fully serviced since new. Last major service performed at the recorded operating hours. Nodpfoz A Iruex Agrjwl Manufacturer: Kaeser CS121 Year of manufacture: 1997 Sigma Control system Serial number: 1211178 Operating pressure: 10 bar Power: 75 kW Capacity: 11 m³/min (695 m³/h) Operating hours: Standby: 86,033 h / Loaded: 28,900 h Sigma Control system Motor speed: 1500 rpm Electrical power: 75 kW Overall dimensions: Length 1960 x Width 1240 (+150) x Height 1440 mm Weight: 1200 kg

Year of construction: 2004, condition: excellent (used), 1 used quick steaming units ----- manufacturer : CERTUSS type : Universal capacity : 1.300 kg/h thermal output : 947 kW Njdpfx Agji E Hztsrowl working pressure : 10 bar test pressure : 57 bar water contents approx. : 155,7 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2004 yoc heating coil : 2018 / 2021 equipped with Certuss oil burner, oil throughput 40-80 kg/h, switch cabinet built on boiler body, feed water pump and the existing fine and coarse fittings.

Year of construction: 2013, condition: good (used), Hydraulic press, oil hydraulic press, shear press Nwsdpfsix Aylox Agrjl -Manufacturer: Santenberg, hydraulic shear press -Hydraulic unit: HyPneu 0.75 kW / 100 bar -Individual components: see photos -Dimensions: 1190/910/H1670 mm -Weight: 262 kg

Year of construction: 2004, condition: excellent (used), 1 used low pressure steam boiler ----- manufacturer : LOOS, Gunzenhausen type : U-ND capacity : 800 kg/h working pressure : 1 bar test pressure : 2 bar water contents full : 1.108 l year of construction : 2004 CE mark : 0036 equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, fittings for gas supply, switch cabinet with touch panel, Nsdponp Hwksfx Agrowl and the existing small and large-scale fittings. Dimensions of boiler body (approx.): diameter incl. insulation : 1.230 mm width : 1.450 mm transport height : 2.200 mm length : 1.950mm length including burner : 2.700 mm 1 used feedwater module ----- manufacturer : LOOS, Gunzenhausen type : WSM content approx. : 800 l with switch cabinet, sampling water cooler, 2 dosing vessels

Year of construction: 1991, condition: excellent (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD Njdji E Hz Tepfx Agrowl heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 10 bar increased test pressure : 18,5 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1991 equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Nsdpfx Aozgq Szjgrswl Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: new, Year of construction: 2025, operating hours: 1 h, Screw compressor ALMIG BELT XP 8 - 10 bar (air cooled) include dryer include time drain include 2 filters include 270 liter tank galvanized Year 2025 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT XP 8 270 RD Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.00 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 7,5 kW Nwsdpex Rb D Sefx Agrel Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 63 dB (A) Length: 1320 mm Width: 695 mm Height: 1898 mm Weight: 447 kg Compressed air connection: G 3/4 "

Condition: excellent (used), Year of construction: 2006, 70 linear meters of SSI Schäfer Palflex pallet racking, including infill grating Used, in good condition, see pictures Nsdpskx E I Nofx Agrjwl Year of manufacture: 2006 Height: 4 m Depth: 120 cm Field load: 12000 kg Frame: galvanized Beams: red Infill grating included! 2 pieces of grating per 2.7-meter beam length Negotiable price: €8,290 net ex works The offer includes: + 26 units of pre-assembled frames, depth 120 cm, height approx. 4 m + 100 units of beams, length 2.7 m, 1500 kg load capacity per bay with evenly distributed load + 200 units of safety locks + 100 units of galvanized infill grating for 50 levels, each 2.7 meters in beam length + 104 units of concrete anchors + Load capacity signs Goods are in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex works) Lenox Trading – Top warehouse technology & heavy-duty racking used & new Description text: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage mezzanines & steel construction mezzanines immediately available • 30–50 semi-trailer truckloads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a real all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including a complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods release, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for a galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), Year of construction: 2019, operating hours: 1,300 h, machine/vehicle number: MA0012_SN938086, RENNER RSK-B 7.5 - 10 bar oil-injected screw compressor with integrated refrigerant dryer Nwjded Sw Ncopfx Agrol The new compressor is in stock and available immediately Pressure: 10 bar Rated power: 7.5 kW Delivery quantity: 1.02 m³ / min Sound level: 78 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 1031 x 572 x 721 mm Weight: 225 kg Operating hours: 1300 Bh Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Year of construction: 2013, condition: ready for operation (used), Effective diameter: 1000mm, effective height: 450mm, max. load: 900kg, connected load: 7.34kW, turbine power: 5.5kW, impeller diameter: 334mm, throwing blades: 6, discharge speed: 30m/s-70m/s. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/3500mm, weight: approx. 2050kg, operating hours: 2559h. Documentation available. On-site inspection is possible. Nwjdpfx Ajvdu N Nogrol

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, The filter body is original PENTAS, Czech/EU production. The automation system has been newly built and has never been used. Main data: - Manufacturer: PENTAS Horice a.s. (CZ-EU) - Model / type: AO-9N - Type: vertical pressure leaf filter - Filtration area: approx. 10 m² - Filter body: stainless steel - Vessel volume: 830 l - Max. working pressure: 0.5 MPa Nsdpfx Aetxc Hpegrowl - Max. working temperature: 40 °C - Weight: approx. 760 kg - Year of filter vessel: 1999 - Automation: new and unused - Control: PLC control cabinet - Valves: pneumatic valves - Includes piping, fittings, sensors and automation system - Location: Slovakia, EU Suitable for filtration of vegetable oil, rapeseed oil, sunflower oil, soybean oil, technical oils, biodiesel and oleochemical applications. The filter vessel is used, but the automation system is completely new and unused. The unit is designed for automatic operation with pneumatic valves, sensors and PLC control. Fully functional according to seller information. Sold as shown in the photos. Loading possible. Worldwide shipping on request. 7. Nemački dodatak Zu verkaufen: PENTAS AO-9N Edelstahl-Druckblattfilter mit ca. 10 m² Filterfläche. Der Filterbehälter ist original PENTAS, tschechische/EU-Produktion. Die Automatisierung wurde neu aufgebaut und ist unbenutzt. Technische Daten: - Hersteller: PENTAS Horice a.s. (CZ-EU) - Modell / Typ: AO-9N - Vertikaler Druckblattfilter - Filterfläche: ca. 10 m² - Edelstahl-Filtergehäuse - Behältervolumen: 830 l - Max. Betriebsdruck: 0,5 MPa - Max. Betriebstemperatur: 40 °C - Gewicht: ca. 760 kg - Baujahr Filterbehälter: 1999 - Neue, unbenutzte Automatisierung - PLC-Schaltschrank - Pneumatische Ventile - Rohrleitungen, Armaturen, Sensoren und Steuerung inklusive - Standort: Slowakei, EU Geeignet für Pflanzenöl, Rapsöl, Sonnenblumenöl, Sojaöl, technische Öle, Biodiesel und oleochemische Anwendungen. Der Filterbehälter ist gebraucht, die Automatisierung ist neu und unbenutzt. Voll funktionsfähig laut Verkäuferangabe. Verkauf wie auf den Fotos. Verladung möglich. Versand auf Anfrage.

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits Nwodpfx Agsxqzmkerel The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Nsdji E Trpopfx Agrewl

Condition: used, Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 1501, total width: 3,000 mm, total height: 2,700 mm, total length: 21,000 mm, overall weight: 4,000 kg, space requirement width: 5,000 mm, Used ASCOT BRICMATIC 1-65/150 briquetting press, manufactured in 2000. This unit features a triple production line configuration, designed for the efficient industrial compaction of wood residues, sawdust, and shavings into high-density biomass briquettes. It is a robust and reliable solution for woodworking plants and biomass production facilities. The machine is currently partially disassembled in our warehouse. Nsdpfxozxyd Re Agrswl

Condition: used, Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measuring technology, contact manometer Nwsdpoiraycefx Agrol -Manufacturer: Wika, Manometer Pressure gauge with contact device -Type: 233.50.100 Kont 821.1 16 bar -Screw connection: see photos -Dimensions: 160/130/H120 mm -Weight: 1.3 kg

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, Two-jaw drill chuck, 2 hand-operated eccentric clamps, dial indicator in the handwheel, 2 speeds 1400 – 2800 rpm. The machine has been fully overhauled and newly adjusted at our facility. Nwodpfx Ageyzc E Sjrsl

Condition: used, Year of construction: 1996, turning diameter 250 mm turning length 1000 mm Control Philips CNC-Steuerung weight of the machine ca. 8 t PHILIPS CNC control X-axis: 295 mm / Y-axis: 295 mm Center distance: 1000 mm Max. diameter on the bed: Ø 310 mm Max. diameter when turning: Ø 250 mm. Maximum turning speed: 4500 rpm. Njdpfxjyan R Aj Agrowl Spindle bore diameter: Ø 78 mm Turret with 8 tools Weight: approx. 8 tons

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 20253436, Exhibit in stock immediately available (Plug and Play): RENNER RSK-B 7.5 - 10 bar oil-injected screw compressor with integrated refrigerant dryer with automatic Drain Nwedetiy Aujpfx Agrol Operating hours: 2 h Year: 2024 Pressure: 10 bar Rated power: 11.0 kW Delivery quantity: 1.54 m³ / min Sound level: 81 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 1031 x 572 x 803 mm Weight: 243 kg Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: new, Year of construction: 2026, NEW ON THE POLISH MARKET 230 V screw compressor Screw compressors from the Polish brand CORMAK are a guarantee of quality and reliability. Our several years of experience in selling compressors has allowed us to create models with an excellent price-quality ratio. The presented model is perfect for small workshops or small manufacturing companies. It is characterized by high efficiency (380 l / min) in relation to its dimensions, which allows you to operate several devices at the same time. Very low noise level (60 dB) makes staying in the same room not inconvenient. Thanks to the high-quality components used, the compressor is designed for continuous operation and can be used in industry. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision workmanship. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Efficiency optimization: Thanks to inverter technology and intelligent algorithms, the LUFT 400 dynamically adjusts energy consumption to the current demand for compressed air. This means a significant reduction in operating costs while maintaining maximum efficiency. Proven drive system: The LUFT 400 compressor uses a reliable direct drive that minimizes loads on the screw block and engine, ensuring efficient operation and long service life. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. Technical parameters Nwsdpfxjtz S H Nj Agrel Engine power 3.0 kW / 4 HP Voltage 230V/50Hz Efficiency 0-6 bar average 400 L/min Efficiency at 6 bar 390 L/min Capacity at 8 bar 380 L/min Capacity at 10 bar 380 L/min Outlet port diameter (G) 1/2" Dimensions 800 x 520 x 740 mm Weight 95 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, The CORMAK LUFT 2000 VSD+PM is an excellent choice for truck service workshops, tire service centers, and small manufacturing facilities. Despite its compact dimensions, it delivers an impressive 2,000 L/min actual air output, allowing multiple pneumatic tools to operate simultaneously. Its exceptionally low 74 dB noise level provides a much quieter and more comfortable working environment than conventional piston compressors. Built with premium-quality components, the compressor is designed for continuous-duty industrial operation. Compact Power for Your Business Powered by a 15 kW motor and delivering up to 2,000 L/min, the compressor provides a continuous supply of high-pressure compressed air required for: High-torque impact wrenches Heavy-duty pneumatic tools Truck tire inflation Industrial production equipment Continuous workshop operations Operating on a 400 V / 50 Hz power supply, the unit is engineered for continuous operation, making it ideal for workshops, tire service centers, manufacturing facilities, and various industrial applications. By replacing a conventional piston compressor with the LUFT 2000 VSD+PM, users benefit from significantly quieter operation, greater efficiency, and improved workplace comfort. Reliable Direct Drive System The LUFT 2000 VSD+PM features a proven direct-drive transmission system, eliminating vibration and removing the need for belt adjustment or replacement. Direct power transmission from the motor to the airend ensures: Maximum mechanical efficiency Reduced maintenance requirements Smooth and reliable operation Extended service life Maximum Working Pressure – 13 Bar The compressor delivers a maximum operating pressure of 13 bar, making it suitable for demanding industrial applications requiring higher air pressure. Operation is managed through the intuitive MAM electronic controller, providing real-time monitoring of key operating parameters, maintenance scheduling, diagnostics, and complete control over compressor performance. VSD Inverter Technology The integrated Variable Speed Drive (VSD) inverter continuously adjusts the compressor motor speed according to the actual compressed air demand. Compared with fixed-speed compressors, VSD technology offers: Significant energy savings Reduced electricity consumption Stable system pressure Lower mechanical wear Longer compressor lifetime Lower operating costs Because electric power represents up to 80% of the total lifetime operating cost of a compressor, VSD technology delivers a rapid return on investment. Premium Screw Airend High-performance CORMAK compressors such as the LUFT 2000 VSD+PM are equipped with technologically advanced screw airends that provide outstanding efficiency and long-term reliability. Technical Specifications Parameter Value Motor Power 15 kW / 20 HP Power Supply 400 V / 50 Hz Nodpfxozmgc Ao Agrjwl Air Delivery (0–6 bar) 2,100 L/min Air Delivery at 6 bar 2,000 L/min Air Delivery at 8 bar 1,700 L/min Air Delivery at 10 bar 1,600 L/min Air Outlet Connection G 3/4" Dimensions (L × W × H) 1,080 × 750 × 1,000 mm Weight 400 kg

Condition: excellent (used), Joystickbox for Mitutoyo CMM with CMMC 1, 1S, 2; 2S; 3; 3S; 6 and UC200/400 Nwjdsgynw Dspfx Agrel

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 4536/1, Manufacturer: Tvornica Parnih Kotlova (TPK) Zagreb Model / Type: Bkg 40A Steam Output / Capacity: 4,000 kg/h Year of Construction: 1980 Serial Number: 4536/1 Max. Allowed Working Pressure: 12 bar (12 kp/cm²) Fuel Type / Burner: Burner for liquid/gaseous fuel (mounted on front door) Included Equipment: Control panel / electrical cabinet, safety valves, pressure gauge, piping, and valve fittings For sale is an industrial steam boiler manufactured by TPK Zagreb, model Bkg 40A, with a steam capacity of 4.0 t/h (4,000 kg/h) and a maximum operating pressure of 12 bar. Njdpfxszuaple Agrowl The boiler comes complete with a front-mounted burner, control cabinet, safety fittings, and associated piping valves. It is ideal for various industrial processes including food processing, textile, chemical, and manufacturing industries. Condition: Used (sold as-is / where-is). Location: Skopje/North Macedonia

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, Trade fair exhibition machine available immediately (Plug and Play): Frequency-controlled RENNER RSDKF-PRO 7.5 (10 bar) oil-injected screw compressor including RENNERtronic Plus Touch control Nsdperxu Ahofx Agrjwl including 2 x galvanized 90 liter compressed air tanks including refrigeration dryer with level-controlled condensate drain including CEE plug Operating hours: 1 Pressure: 10 bar Rated power: 7.5 kW Quantity delivered: Delivery quantity at 10 bar: min. 0.33 m³/min max.: 1.09 m³/min Compressed air connection: G 1/2" Sound level: 62 dB(A) Volume compressed air tank: 2 x 90 liters Dimensions L x W x H: 1120 x 755 x 1550 mm Weight: 369kg Freight possible for an additional charge. Visit our store. We always have a large selection of new and used compressors in stock!

Condition: excellent (used), mileage: 207,559 km, power: 315 kW (428.28 HP), first registration: 12/2011, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,720 mm, fuel: diesel, fuel tank capacity: 15,000 l, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 9,000 mm, total width: 2,500 mm, Year of construction: 2011, = Additional options and accessories = - PTO = Remarks = Wiedemann Reichhardt 15m³ kolkenzuiger (type: 12.0/2.5 - 320) - bovenzijde, links- en rechtsverschuifbaar (zuigslang Ø200 mm) - Hogedrukslanghaspel achterzijde (120 meter hogedrukslang Ø19 mm) - Capaciteit: 3.000 m³ per uur - Speck Hogedrukwaterpomp (type: P45-75 180) - Achterwaarts kippende opbouw met hydraulische bediening - Extra inspectieluiken op slibtank voor reiniging en onderhoud - Welvaartsweegsysteem (type: Delta 30) - Radiografische afstandsbediening = More information = Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels; Steering Weights Nedpfx Aoymrfkogrjwl Empty weight: 16.700 kg Carrying capacity: 15.300 kg GVW: 32.000 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: BZ-RB-28 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Pressure sensor, pressure transmitter, pressure transducer, flush-mounted pressure sensor -Condition: Original packaging very good -Manufacturer: WIKA, Pressure transmitter type Transmitter S-11 -Measuring range: 0-600 mbar -Input: 10-30 VDC -Output: 4-20 mA -Thread: 1 inch Nsdezufh Tspfx Agrjwl -Quantity: 1 sensor available -Price: per piece -Cardboard dimensions: 180/80/H60 mm -Weight: 0.4 kg