Used Pth Inserter for sale (1,788)

Condition: used, Manual Socket Inserter Hjdpfx Ajuxt Ahol Sel

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Hedpfx Alju Rwa Is Ssl Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, 2-axis removal machine, inserter, servo robot, workpiece gripper, pick-and-place machine, removal robot Removal device, handling device for presses, lathes, etc. GETECHA Type GL-20S No. 13836 Year of manufacture 10/2003 Z-axis travel 1900 mm Travel distance Y-axis 250 mm Travel speed Z-axis max. 1100 mm/sec. Travel speed Y-axis max. 227 mm/sec. Hjdpfx Aeharwyol Sel infinitely variable travel speed in Y- and Z-axis via SMB servomotors - precise axis movement via linear guides - epis control system - Control panel opposite - Control for conveyor belt, gripper magnets, bead breaker cylinder, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic - Mounted gripper with 3 lifting magnets, 3 pneumatic push-off cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours 25998 hrs. The system was used as an inserter/removal device on a press. Space requirement L x W x H 2900 x 1800 x 2000 mm Weight approx. 800 kg good condition

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200145, 2004 Buhrs BB300 Envelope Insertion Machine (with Intelmail VAF front end) Sr Nr: 200145 8 Station model currently running 6 AT25 rotary feeders with an MTS Sure-feed SE1200 PS/PC in the position of the last 2 hoppers. Spare AT25 rotary feeder & AS25 Shuttle feeder. Intelmail VAF front end fully integrated by Intelmail at supply in 2004. Buhrs specification: Envelope format: Standard envelopes with window min. C6 - 114 x 162 mm / 4 1/8 x 9 1/2 inch (No.10) DL-110x220mm max.B4 - 250 x 353 mm / 9 ¾ x 13 ½ inch flap length: max.: 55mm / 2 ¼ inch, min.: 20 mm / ¾ inch Paper quality (envelope): min. 75 gsm, max. 110 gsm Thickness of supplement material: max. 9 mm, / 3/8 inch Supply conveyor: min. 150mm / 6 inch, max. 330 mm / 13 ½ inch Paper quality (supplement material): min. 70 gsm VAF specification: Power requirements Voltage 110 - 240 volts A.C. Frequency 50 - 60 Hz Phase Single Power 200 Watts Thermal 170 Joules/s Physical Dimensions (Approx) Hjdsyfwgdjpfx Al Ssl - Length 1650 mm - Width 530 mm - Height 1200 mm - Weight 140 kg (308 lbs) General Sound Level 72 dBA Fold Unit - Letter fold sets: Up to 8 pages 85 gsm, [22lb]; Half fold sets: Up to 12 pages 85 gsm, [22lb] Paper Size range 145 x 180 mm to 296 x 420 mm Feed and Read Rate 50,000 + sheets per hour. [A4 sheets] Form sizes / A4 up to A4 [and A3 half folded] Paper Weights 60 - 200 gsm

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 45° 610-550 with inclined inlet 45° RA1279 The Gebhardt roller curve is from 2007 and in a good (used) condition. It has an engine of the brand SEW. Supports and side guides are not included in the scope of delivery. These are optionally available. Hsdek Aa Rrjpfx Al Sol Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 010.05.1 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 45° Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.35 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 45 kg Scope of delivery: without supports and side guide (if necessary please enquiries) Optional Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003497 - Manufacturer Code: 2-083-01-0116 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service. Please contact us. Hedpeymd Udofx Al Sjl

Condition: used, Features: Condition: fully functional, with traces of use. Ideal for fast material transport Expertly disassembled and packaged Manufacturer: Budde Condition: used drive type: motorized -king shaft total length outside: ca. 1500 mm total length inside: ca. 1850 mm total width incl. motor: ca. 900 mm total width without motor: ca. 560 mm conveying width: approx. 540 mm Material: steel, plastic Color: light gray Including feet (height adjustable) and motor gear (north 0.55 KW) Discharger/ Infeed/ Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under heavy load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers. Hjdpfx Alemxf Uve Sol

Year of construction: 2005, condition: used, Book mark inserting machine Sigloch LEH 1 Year: 2005 Description: - Right hand infeed Hsdpfxeyid Rbj Al Ssl - Scissor - Delivery to the left Book block format (max): 350 x 240 x 70 mm Book block format (min): 10 x 65 x 3 mm Max. mechanical speed: 20 mtr/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: like new (used), Frama Inserting Machine, Type DI380 Processes 3000 pieces/hour (folding and inserting) Folding types: C-fold, Z-fold, single-fold, double-fold Sealing: Yes Paper input capacity: 325 Hsdpfxjyir Hte Al Sol Insert input capacity: 100 Envelope input capacity: 100

Condition: excellent (used), End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 80 mm Hedsyhcg Ujpfx Al Ssl -Milling height: 75 mm -Recording: SK50 -Manufacturer: Hoffmann -Type: KRE80-321 -Order No.: 229.810.00 -Weight: 7.8 kg

Condition: like new (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm Hsdpscwb Nfjfx Al Ssl -Adjustment: SK50 -Manufacturer: WIDIA -Type: 06306 Widax M30 -Number: 3x milling cutters available -Price: per piece -Dimensions: 224/100/H100 mm -Weight: 5.6 kg

Condition: ready for operation (used), Year of construction: 2001, Four loading units Pavan for lasagna sheets in industrial production lines are available. Capacity: approx. 250 trays/h, format range: 200mm/150mm, machine dimensions X/Y/Z: approx. 1800mm/850mm/1650mm, weight: approx. 325kg. An on-site inspection is possible. Hjdoxl El Hepfx Al Sol

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 6 t, stroke length: 80 mm, throat depth: 500 mm, total length: 780 mm, total width: 610 mm, total height: 1,700 mm, working height: 1,033 mm, Equipment: documentation/manual, Insertion and clinching equipment. Robust, lightweight, and compact machines that provide reliability and accuracy for your operations. Fully hydraulic and precise, these units guarantee reliable insertion at any point along the punch stroke. Equipped with a dual integrated safety system, featuring a distance sensor on the punch holder. Operated via a dual electric safety foot pedal. Hjdpjyhnmyefx Al Ssl Includes integrated software and a 4” touchscreen display. Pre-loaded library with insert definitions and relevant force settings. Fully updatable and manageable. (Available models with insertion capacities of 6 t, 10 t, or 15 t.) FEATURES: • Electronic adjustment of pressing time (0 to 5 sec). • Adjustable punch return stroke. • Controlled punch movement throughout its entire stroke. • Precision stop system to improve insertion on soft materials such as fiberglass, PCBs, etc. • Multi-die system allows for up to 4 different dies to be mounted, with automatic detection of the working position. • Suitable for clinching operations on thicknesses from 1 to 6 mm. • Compatible with all types of inserts. • Suitable for any material: copper, aluminium, carbon steel, and stainless steel. • Automatic feeding system (PLUS models only). • Laser pointer (optional). • Brush table (optional). 60 NC: Force (t): 6 Adjustable stroke (mm): 0 – 80 Throat depth (mm): 500 Working height (mm): 1033 Power (kW): 2 Dimensions (LxWxH, mm): 780x610x1700 Weight (kg): 493 Multi-die system allows up to 4 different dies to be mounted, with automatic detection of the working position.

Condition: good (used), Year of construction: 2007, KERN 2500 inserting machines for handling C5 and C6/5 envelopes. The set consists of a complete working line and a second set of this type of machine for parts. Year of production: 2007 + set of machines for parts from 2004. List of modules: - automated input module (single A4 sheets) ensures efficient paper feeding. - control module reading, grouping and folding (Grouping and Folding Station – GUF). Hsdpfx Aljwfglwe Sel - 2 modules for adding leaflets, each equipped with 2 feeders. - inserting module - envelope feeder and sealer module with a panel for handling applications and settings. - final conveyor belt with containers for incorrect enveloping. Both sets were used in one company. The first set was installed in 2004 and the second in 2007. The machines were used until 2020, when the company purchased new machines. At that time, the machines were renovated using components from the second set. Since 2020, the renovated machines have been used sporadically and the second set of machines was used for parts. .

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Motorized Roller table "RBO" with 90° conveyoring belts B) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) Hodpfx Aleyhqa Ao Sol slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) C) Connection system, with up-side-down turning machine (180°) "RBO" Mod. Ribaltatore D) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units (1 left+1 right) with 4x BH18 heads with 18 spindles each (36 right + 36 left) total 72 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) E) "BIESSE" RD dowels insertion machine No.2 horizontal units (1 right+1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles F) Brush-cleaning machine "WANDRES"

Year of construction: 2010, condition: used, machine/vehicle number: INS5, Technical Specifications & Performance Data This Divider Inserter by OMA is engineered for reliable insertion of cardboard partitions into cases at high efficiency. Built in 2010, it offers robust performance for industrial packaging and beverage production, making it a strong addition to any used bottling line or second hand packaging setup seeking improved product protection during transport. Manufacturer: OMA Model: INS ALV Year: 2010 Production speed: approximately 1200 cases/hour Case formats: 6-bottle and 12-bottle cases Head configuration: single-head Included equipment: vibratory belt/conveyor for partition handling Electrical supply: 230 V, 50 Hz Installed power: 1 kW Weight: 1000 kg Marking: CE Advanced Automation & Control Systems Hedpeyh E Avsfx Al Sjl The machine is equipped with a dual-sided control interface, featuring a redundant keypad on both sides of the frame to improve operability and access for line personnel. This layout streamlines adjustments, format changes, and maintenance tasks, enabling safer and more efficient operation. The single-head design supports consistent partition placement with reduced complexity and quick routine checks. Production Line Integration Capabilities Designed for seamless integration within industrial packaging lines, this Divider Inserter can operate inline with case erectors, bottle/case packers, and case sealers. It suits both retrofit projects and new installations in beverage production environments. Format compatibility includes 6- and 12-bottle case patterns, with straightforward changeover procedures supported by the dual-sided controls. The unit handles corrugated carton cases and cardboard dividers commonly used to protect bottles during logistics, making it a practical fit for bottling equipment and broader packaging machinery layouts. Machine Condition & Maintenance History The machine is currently in production and available for testing. Its ongoing operation demonstrates maintained performance and readiness for integration into a working used bottling line or industrial packaging line with minimal commissioning time. Operational Performance & Versatility With a throughput of approximately 1200 cases per hour, the OMA INS ALV supports mid-speed lines requiring dependable partition insertion to minimize bottle-to-bottle contact. The included vibratory belt ensures smooth partition feeding and orientation, enhancing process stability and reducing jams. The single-head configuration prioritizes accuracy and mechanical simplicity, which translates into consistent results and lower routine service requirements. Installation Requirements & Site Preparation The unit operates on a standard 230 V, 50 Hz electrical supply with a modest installed power of 1 kW, supporting energy-efficient operation. Its 1000 kg construction delivers stability during high-duty cycles while remaining compact enough for typical packaging hall layouts. The machine’s footprint is well-suited for integration along existing conveyor systems upstream of case sealing and downstream of case packing. Safety Standard...

Condition: used, Year of construction: 1992, Anleger - CMC Einsteckmaschine - Feeder - CMC Inserting machine RITMICA Universal H-200Year 1992 - Serial-No. H-200 2 Feeder for CMC Inserting Machine Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hsdpfjh Ax Snsx Al Sjl

Condition: used, Year of construction: 1979, machine/vehicle number: 4015, Spiraleindrehmaschine - Spiral insertion machine Renz DPSTYear 1979 - Serial-No. 4015 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Hodpeh Axnyjfx Al Sel Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1998, machine/vehicle number: 24124, Kuvertiermaschine / Envelope Inserting Machine Bell + Howell Vitesse BH900 C5 Year 1998 6 Beilagenstationen / 6 Supplement stations Briefwender-Rollenauswurf / Letter turner-roll ejector verarbeitet Briefumschlagformat von C6 bis C5 / processes envelope format from C6 to C5 Geschwindigkeit mechanisch max. 10.000 Takte/Std. / Speed max. 10.000 cycle/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hedpfx Aoupy Tajl Sel

Condition: used, machine/vehicle number: 2907000, Kuvertiermaschine / Inserting machine Fracotyp-Postalia FPi4530Serial-No. 10EY5510 Hedjmkninepfx Al Sjl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: like new (used), STARK Profile Cutter Set 119 pieces, New, partially in original packaging Article number: JA_G250801 Description / Itemized list 82451 8 94011 6 600130 10 62061 9 37911 6 108611 3 108511 3 108581 6 98671 4 108601 6 53421 2 600604 1 600601 2 600607 16 600608 4 600706 7 602029 4 602062 2 602063 3 8602034 2 8602035 2 8602036 2 8602037 2 8602038 2 8602039 2 6002.06 5 Note – Used Equipment: • Prices are listed as ex works (unless stated otherwise!) from our location in Ottendorf-Okrilla, Germany – free loaded (unless otherwise specified). • Subject to prior sale! • You will receive an invoice showing VAT (MwSt.). • All items are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect items at our location. • Our general terms and conditions apply. • Special agreements are only valid if confirmed in writing. • Any items visible in the background of images are not included in the offer. • Saw blades are shown for display purposes only and are not included in the delivery scope. Shipping options: Hedpfx Aew Tlrkjl Sel • We are happy to provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla is free of charge by prior arrangement. (Assembly and product demonstration are available optionally upon request!) • Delivery may be partially disassembled. • Optionally, our qualified service staff can install the machine at your site and provide a brief introduction. Travel, transport, and service time charges apply.

Condition: good (used), m Scope of delivery includes: inserted grating, used Material color: hot-dip galvanized Total depth: approx. 1,030 mm (support bar direction) for stand depth: approx. 1,050 mm Total width: approx. 1,335 mm (cross bar direction) Clear span: approx. 942 mm Mesh width: approx. 68 x 45 mm Support bar: TS30/1.80 Support: approx. 45 mm Internal designation: GR-97 Weight / piece: approx. 18.47 kg Note: The grating may have damage, scratches, dents, welds. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Hjdpfx Asvqa U Rsl Sol General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Year of construction: 2016, condition: excellent (used), Indexable insert milling cutter - Face milling cutter Make Mitsubishi Type AHX 640 W 160 C 22 R Multicorner Face milling cutter for high feed rates Hsdpjfc Tq Ejfx Al Sel for 22 heptagonal inserts Cutter diameter 160 mm

Condition: excellent (used), Insert face milling cutter ( 28233) type Gigacut AW 125-13-8 Hjdpfx Ashzt E Tel Ssl diameter 125 mm mounting hole 40 mm weight 2,5 kg

Condition: new, Items: 70 pcs 502007511 Indexable Inserts P25 B SP 5 for dia. 74.5 - 74.99 mm 9 pcs 503009223 Guide Bar; 42-1820-410; P20BC, dia. 77.500 mm 110 pcs 502005791 Indexable Insert; 22-1634-310; P25 B SP 5 11 pcs 503003851 Guide Bar; 42-1920-410; P20BC, dia. 84.800 mm 7 pcs 503014738 Guide Bar; 22-1630-410; P20BXG, dia. 72.000 mm 5 pcs 503014738 Guide Bar; 22-1630-410; P20BXG, dia. 72.000 mm 9 pcs 503014738 Guide Bar; 22-1630-410; P20BXG, dia. 72.000 mm 80 pcs 502007170 Indexable Insert; 22-1621-310; P25 B SP 5; for dia. 69.5 - 69.99 mm 5 pcs 500100561 Solid Drill Head Type 15; 15-0410-020; dia.: 25.00 mm / carbide grade: 020 30 pcs 502005378 Indexable Insert; 02-1800-310; K10 BX SP 5 51 pcs 503012212 Guide Bar; 42-1920-410; P20BXG, dia. 86.500 mm 20 pcs 502005378 Indexable Insert; 02-1800-310; K10 BX SP 5 9 pcs 502000666 Indexable Insert; 22-1632-310; P40 B SP 2 10 pcs 502000247 Indexable Insert; 42-1613-310; P40 B SP 2 10 pcs 502000624 Indexable Insert; 22-1641-310; P40 B SP 2 20 pcs 502000773 Indexable Insert; 22-1612-310; P40 B SP 2 Hedot Sr Eyspfx Al Sel 20 pcs 502000654 Indexable Insert; 22-1633-310; P40 B SP 2 100 pcs 502010177 Indexable Inserts 01-2610-310 P25 BX SP 91 40 pcs 503017159 Guide Bars 21-0200-410 P20BX, dia. 20.95 mm Available as a complete package or as individual lots. Please feel free to make us an offer. We see ourselves as a competent partner in the field of deep hole drilling. We also gladly accept contract manufacturing inquiries for deep hole drilling operations.