Used Rössler Mhr630 Ecoline (A+E) for sale (89,204)

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) Kodpfx Aeyug Hxsh Aslw "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Year of construction: 1988, condition: used, Compressor unit, type 178 A CD E Delivery rate: 4760 l/min Kedpfx Aogw Dqpoh Aolw Operating pressure: 9 bar Power: 30 kW

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multistage centrifugal pump with opposing suction and discharge connections (inline design). The pump components in contact with the medium are made of high-quality stainless steel. The cartridge seal promises high reliability and ease of servicing. Power is transmitted via a rigid, split coupling. The pipe connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer Product Group: Vertical Centrifugal Pumps Manufacturer Product Group: Vertical Centrifugal Pumps CRN Centrifugal pump CRN Manufacturer article number: 96122358 Connection inlet side: Flange Connection outlet side: Flange Connection standard inlet side: EN 1092-2 Nominal diameter, connection outlet side: DN 65 Design: Vertical Speed: 2924 min Motor output power: 11.0 kW Ksdpfx Ajwbfigsh Aelw Protection class: IP55 Max delivery head: 90.2 m Max working pressure: 16 bar Weight: 193.2 kg List price: 14,844.00 € Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items in other sizes - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 1995, operating hours: 6,735 h, lifting height: 4,870 mm, fuel type: electric, mast type: triplex, fork length: 1,000 mm, Empty weight: 3.360 kg Lifting capacity: 1.500 kg Number of valves: 3 Supply voltage: 24 V Kjdpew Dah Aofx Ah Ajlw General condition: average Technical condition: average Visual appearance: average Fork carriage: Sideshifter Please contact Bas Sindorf for more information

Condition: reconditioned (used), functionality: fully functional, Roll Divider and Rounder Machine Fortuna Automat Grüße 4 E 30-part roll press Kodpfxsxcqgde Ah Aolw With moulding deactivation Dough input: 1200–3300 grams Dough piece weight: 40–110 grams Knife head electrically tiltable to the rear for cleaning Dividing head/knives newly reworked Knives made of stainless steel Machine was completely overhauled and repainted 2 years ago Moulding plate and operating manual included

Condition: refurbished (used), Various Almatec pumps, plastic version, all sizes of the A series, some also E series, cpl. reconditioned, immediately available Kledpfxjfcy Anj Ah Asw

Condition: new, Year of construction: 2022, functionality: fully functional, NEW Grundfos Pump CRN 10-12 A-FGJ-G-E-HQQE | Stainless Steel AISI 316 | 4 kW Condition: Brand new, never used. Model: CRN 10-12 A-FGJ-G-E-HQQE Manufacturer: Grundfos (Leading pump solutions provider) DEVICE DESCRIPTION The item for sale is a high-performance, vertical multistage centrifugal pump from the CRN series. This is a version made entirely from acid-resistant stainless steel (AISI 316), setting it apart from the standard cast iron models (CR). It is designed for operation in the most demanding industrial conditions, ensuring reliability when handling aggressive and demanding liquids. The pump is an ideal solution for businesses seeking a high-efficiency device, ready for immediate installation in water treatment systems, technological processes, or high-pressure setups. _____ KEY TECHNICAL DATA • Rated flow: 10 m3/h • Rated head: approx. 96.7 m (max up to 122 m) • Motor power: 4 kW • Power supply: 3-phase • Rotational speed: 2900 rpm • Maximum operating pressure: 25 bar • Liquid temperature range: -20°C to +120°C • Number of impellers: 12 • Year of manufacture: 2022 CONSTRUCTION AND MATERIALS • Material configuration (G): All liquid-contacting parts are made from stainless steel EN 1.4401 / AISI 316 (providing maximum corrosion resistance). • Shaft seal (HQQE): Durable cartridge mechanical seal made from silicon carbide (SiC/SiC) with EPDM elastomers. Guarantees longevity and leak-tight operation even with hot water. • Connection (FGJ): Universal flanged system (DIN/ANSI/JIS), allowing easy adaptation in existing installations. _____ APPLICATIONS Thanks to its acid-resistant construction, the CRN pump is suitable for: 1. Chemical and pharmaceutical industries (pumping acids, alkalis, aggressive media). Kedjx Im Ahjpfx Ah Aelw 2. Filtration and water treatment systems (reverse osmosis, ultrafiltration). 3. Industrial washing systems and CIP/SIP cleaning setups. 4. Process water installations in brewing, dairy, and food industry. _____ WHY BUY THIS PUMP? • Premium product: The CRN series is the “Mercedes” among vertical pumps. • Time-saving: Device is available immediately (no long lead times from the manufacturer). • No usage marks: The pump is brand new, properly stored, and ready to operate at full capacity. Important: Please verify that the electrical and hydraulic parameters match your project requirements before purchase.

Condition: new, Year of construction: 2025, operating hours: 3 h, functionality: fully functional, feed rate X-axis: 7 m/min, workpiece weight (max.): 1,000 kg, working width: 2,500 mm, volume flow: 8,000 m³/h, year of last overhaul: 2025, overall weight: 3,200 kg, type of input current: three-phase, passage height: 210 mm, total height: 2,350 mm, total length: 2,450 mm, total width: 3,500 mm, working height: 950 mm, Ceetec DuoFlex Spray – The Coating Machine for Joiners, Furniture Makers, CLT and Glulam BSH Suppliers, and much more cases. Kledpfxoffc Tyj Ah Aow Wherever a solid, straightforward, yet exceptionally well-equipped machine is needed, the DuoFlex Spray surface spray machine comes into play. Spraying doesn’t have to be complicated – not when you have a robust, long-lasting machine (made in Denmark, electronics from Germany – Beckhoff and others) that puts the operator at the center of it all. Everything is intuitive and easy to use, yet you get features you’ll struggle to find elsewhere – or only in significantly more expensive machines. Here are some hard facts about the DuoFlex Spray: 1. Color changes in just 3–5 minutes 2. System volume only 2.5–3L of paint/lacquer 3. Suitable for both solvent-based and water-based coatings 4. Two fully separated circuits – ideal for solvent/water or clear/topcoat separation 5. Maximum reproducibility – thanks to smart programming that stores all key parameters automatically 6. Quick to learn – after just 4–6 hours of training, even a baker can spray better than a manual sprayer with 10 years’ experience 7. Modular expandability – drying systems, sanding units, preheating, robotic integration – all from a single source 8. Service that speaks your language – our owner spent nearly 10 years as a coatings manager and brings hands-on expertise to your shop. The machines are extremely durable, and if anything should go wrong, we maintain well-stocked spare parts warehouses in both Germany and Denmark Processing dimensions for the DuoFlex Spray: 1. Standard: 1,300 mm width × 200 mm height 2. Larger: 1,800 mm width × 200 mm height 3. Up to: 3,200 mm width × 330 mm height Length: from 250 mm up to virtually unlimited. If you want to coat CLT ceiling panels 16, 18, or 20 meters long, we’ll simply build the right handling system for you. Sound interesting? Would you like to try the machine in our technical center? Do you have specific requirements and wonder if we can deliver? Then I’ll be happy to help you personally. Best regards, Martin Bruhn Owner, Bruhn Lackieranlagen // Exclusive Sales Partner of Ceetec A/S – Middelfart, Denmark

Condition: excellent (used), mileage: 786,169 km, power: 147 kW (199.86 HP), first registration: 07/1992, fuel type: diesel, wheelbase: 4,200 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, total length: 8,200 mm, Year of construction: 1992, = Additional options and accessories = - PTO = Remarks = WDB67703315752728 = More information = Klsdpfx Aeymrxwsh Asw Empty weight: 11.680 kg Carrying capacity: 1.320 kg GVW: 13.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: 1ACO417 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Polish Lathe / Polishing Machine Kedpfx Aozmxwxeh Aslw Between points: 1500 mm Centre height: 180 mm Maxi diameter to polish: Ø 380 mm Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

Condition: excellent (used), Year of construction: 2002,

Condition: excellent (used), Year of construction: 2005, Hartford VMC 1270 A Year of manufacture: 2005 Control system: - Fanuc - Electronic handwheel Main spindle: - Spindle speed max. 8000 RPM - Tool holder BT40 Travel distances: - X - 1270, Y - 600, Z - 725 mm Tool changer: - 25 magazine positions Table: - Clamping area 1370 x 600 mm Cooling: - Internal coolant supply 20 bar - Chip conveyor Delivery time: Kodpfx Asznbn Aoh Ajlw - Immediate

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,800 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Laser cutting machine with 1500 W fiber laser, ecoline series Our goal is to offer high-precision, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as well as first-class service. Please also note our attractive leasing/hire-purchase offers. The exceptionally affordable entry into laser cutting technology - high-quality MaxPhotonics laser source - extremely energy-efficient cutting system - requires only approx. 3.0 x 3.0 meters of floor space - Top quality, schedule a viewing now! Cutting of steel sheet up to 15mm Cutting of stainless steel sheet up to 6mm Cutting of aluminum sheet up to 5mm - Travel range approx. 1300 x 1300mm - Size of the support table: approx. 1300 x 2500mm (i.e. a whole medium-format sheet fits into the machine) - Machine control in German - manual front door - Comprehensive collision protection measures - large front window for observing the cutting process - automatic, programmable 2-gas switching (compressed air/nitrogen, oxygen) - Extensive cutting parameter file - incl. housing module - CypCut1000 cutting software - Raytools 240 cutting head - very easy to operate. - powerful laser cooler Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 3.2m Height: 2.3m Ksdpfxoitu Sre Ah Aelw Length: 3.3m Total weight: approx. 2800kg Do you need a different laser power, table shape, or table size? No problem. I will gladly create a suitable offer. Are you unsure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. A lot is possible here. From 0.5 kW to 20kW laser power.

Condition: new, A Drive M642-1340-1208-PZ servo motor, serial number: 2002001, unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. Klodpfx Aei D Ewajh Aow

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  - Capacity: 12 – 14 cycles/min (tray former) - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing - Utilities: - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) - Air pressure: 0.6 – 1.0 MPa - Rated current: 2 A (tray former), 3 A (case sealer) Kledpfxeyxxxvo Ah Aew Scope of Delivery  - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections Kledjzlaitjpfx Ah Aow – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards – Operating tools – Press plate

Condition: used, Inductive conductivity transmitter, conductivity transmitter, conductivity measurement -Manufacturer: EH Endress Hauser, conductivity transmitter -Type: conducta XR 2 -100434-0100 -Measuring range: 0 to 100% -Voltage: 220V 50/60Hz Klsdoldk I Djpfx Ah Ajw -Dimension: 180/95/H95 mm -Weight: 0.8 kg

Condition: good (used), Three-phase motor, electric motor -Power: 2.2 kW -Speed: 950 rpm -Shaft: Ø 28 x 60 mm -Design: B3 Kjdpfjdlw D Usx Ah Aslw -Protection class: IP 44 -Dimensions: 380/236/H270 mm -Weight: 38 kg

Condition: used, Inductive conductivity transmitter, conductivity transmitter, conductivity measurement -Manufacturer: EH Endress + Hauser, conductivity transmitter Kedpfxeldk Iko Ah Aelw -Type: conducta XR 2 -Measurement range: 0 to 200 mS -Voltage: 220V 50/60Hz -Dimension: 180/95/H95 mm -Weight: 0.8 kg

Condition: good (used), Motor protection switch, star-delta switch Klodpjb A Scwsfx Ah Ajw -Type: MYehb -Price: per piece -Number: 18 available -Weight: 2 kg

Condition: used, Three-phase motor, electric motor -Power: 4 kW Kedpfedwlqdjx Ah Aelw -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Dimensions: 395/300/H225 mm -Weight: 41 kg

Condition: used, Three-phase motor, electric motor Ksdpfx Ahjcncrio Aslw -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 490/325/H270 mm -Weight: 71 kg

Condition: used, Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 445/340/H260 mm -Weight: 55 kg Kjdpfx Ascqudksh Aslw

Condition: refurbished (used), Year of construction: 2012, operating hours: 3,825 h, functionality: fully functional, power: 37 kW (50.31 HP), overall weight: 1,700 kg, total length: 2,280 mm, total width: 1,725 mm, total height: 1,730 mm, working width: 820 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 1,200 mm, control cabinet width: 600 mm, number of blades: 40, rotational speed (max.): 98 rpm, rotor diameter: 360 mm, rotor width: 820 mm, sieve perforation: 25 mm, type of input current: AC, warranty duration: 6 months, Equipment: documentation/manual, Hacker shredder, wood shredder, chipper, shredder MHR830-2 proline The MHR proline series consists of robust and energy-efficient wood shredding machines developed for reliable continuous operation in commercial environments. These powerful shredders offer high performance and excellent value for money. This makes them ideal for industrial companies, craft businesses, recycling companies, and wood processing companies looking for an economical and high-performance solution. Kljdpezh N Nuofx Ah Aew The machine has been completely overhauled in our factory in Germany and can be inspected while powered on. The following work has been carried out: - Complete disassembly and reassembly - Machine blasted and powder-coated - Rotor overhauled and fitted with new blades - Bearings replaced - Gearbox replaced (new) - Main motor, year of manufacture 2022 - Screen replaced, hole size 25 mm - Sliding strips and scraper strips on the slide replaced - Counter knife is new - Control cabinet inspected and found to be error-free - Machine has been test-run, a video can be sent upon request. Advantages of the MHR830-2 with 37 kW: - Continuous, uniform shredding process - High performance and throughput - Robust design - Large hopper opening - Excellent value for money - Ready for connection - Siemens PLC controlled - MHR830-2_37kW proline Rößler shredder "Made in Germany"

Condition: good (used), Code: 0432 Brand: TOMMASI E BONETTI - ITALY Model: T O6 SA - CE Standard Column grinder with dust extractor for metalworking, workshops, laboratories, joinery workshops, structural steelworks, etc. - CE standard Three-phase motor Hp 1,5 2800 rpm Grinding wheel dimensions: 200 x 25 x 20 mm Extraction motor 0,5 Hp Overall dimensions mm 560 x 680 x 1000 h Weight kg 25 Klsdpfx Aozipx Eeh Aew