Used Raboma 12Uh 1600 for sale (2,470)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 700 mm, total height: 1,000 mm, total width: 1,600 mm, Work Table AT 1600 with Stainless Steel Top, Mobile Premium Work Table for Gastronomy / Bakery Stainless steel work surface Open bottom / accessible underneath Ppjdoyhy Hijpfx Al Ssr Reinforced, welded construction Approx. dimensions: 1600 x 700 x 1000 mm (W x D x H) Used unit, cleaned Option: Delivery service New castors / wheels Visit our large warehouse!

Condition: as good as new (ex-display), Year of construction: 2016, functionality: fully functional, PRIMULTINI bandsaw model 1600 in very good working condition. 2 units available. I speak Italian, Bosnian, and Serbian. 1 PRIMULTINI manufactured in 2016 and 1 unit manufactured in 2017. Ppsdpfx Alsyha A To Ssr

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated Pjdpfjyzumzjx Al Sspr - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 800 mm, table load: 4,600 kg, overall weight: 18,600 kg, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Johnford VMC-1600S was manufactured in 2014. It features a longitudinal travel of 1600 mm, cross travel of 1100 mm, and vertical travel of 800 mm. The machine has a robust table working surface of 1800 x 1000 mm and a maximum table load capacity of 4600 kg. If you are looking to get high-quality milling capabilities, consider the Johnford VMC-1600S vertical machining centre we have for sale. Contact us for further details. • Table working surface: 70.9” x 39.4” (1800 x 1000 mm) • Spindle nose to table: 5.9”–37.4” (150–950 mm) • Spindle center to column: 45.3” (1150 mm) • Spindle taper: • VMC-1600S: BT-40 / CAT-40 • VMC-1600SHD: BT-50 / CAT-50 • Spindle diameter: Pjdjy A Ik Ajpfx Al Sjpr • VMC-1600S: 2.75” (70 mm) • VMC-1600SHD: 3.9” (100 mm) • Spindle speed: • VMC-1600S: Auto Hi-Lo Gear 80–8000 rpm • VMC-1600SHD: Auto Hi-Lo Gear 10–4500 rpm • Spindle motor: • VMC-1600S: 15/10 HP (15/20 HP optional) • VMC-1600SHD: 25/20 HP • Rapid traverse (X/Y/Z): 18 / 18 / 12 m/min • Feed (spindle): 1–12,000 mm/min • Tool selection: Bi-direction random type, shortest path • Number of tools: • VMC-1600S: Armless 24; Arm type 24/32 (optional) • VMC-1600SHD: Armless 20; Arm type 24/32 (optional) • Max tool diameter: • VMC-1600S: 4” (100 mm) • VMC-1600SHD: 9.8” (250 mm) • Max tool length: • VMC-1600S: 12.5” (320 mm) • VMC-1600SHD: 15.7” (400 mm) • Max tool weight: • VMC-1600S: 22 lbs (10 kg) • VMC-1600SHD: 33 lbs (15 kg) • Floor space: 177.2” x 209.8” (4500 x 5330 mm) • X/Y/Z ballscrew diameter: φ50 / φ63 / φ50 • Cutting capacity (S45C): • Milling: 180 cc/min (S) / 320 cc/min (SHD) • Drilling: φ40 mm (S) / φ52 mm (SHD) • Tapping: M30 x P3.5 (S) / M50 x P4.5 (SHD)

Condition: used, Year of construction: 1994, Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Handover: in its current condition as inspected -Speed control: Cover damaged, handwheel missing (see photos) -Manufacturer: Flender Himmel, adjustable geared motor -Type: LK 02-M1C4 -Speed: 160-1600 rpm Psdpfx Aleyz Sbpj Sspr -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg

Condition: good (used), Year of construction: 1994, Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Flender Himmel, adjustable geared motor -Type: LK 02-M1C4 -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 Ppedpfxjyz R Uho Al Ser -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks Ppjdpfxoyzxalo Al Ssr -Forklift tines: 2 pieces/1 pair -Length: 1600 mm -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1750/590/H110 mm -Weight: 118 kg

Condition: used, machine/vehicle number: 12897, Rotor diameter: 800 mm Rotor width: 1600 mm Psdpfx Aloyr Tuqs Sjpr Rotor blades: 7 Stator blades: 2 Inlet cross-section approx. 800 x 1600 mm Drive motor: 160 kW

Condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Heat exchanger: Oil cooler, shell and tube heat exchanger Podpjyzn Dtefx Al Sjpr -Connections/Dimensions: see photos -Dimensions: 1005/1600/H110 mm -Weight: 13.5 kg

Condition: like new (used), Year of construction: 2014, load capacity: 6 kg, arm reach: 1,450 mm, ROBOT BRAND: ABB MODEL: IRB 1600-6/1.45 TECHNICAL SPECIFICATIONS PAYLOAD: 6 KG MAX. REACH: 1450 MM YEAR OF MANUFACTURE: 2014 CONTROL: IRC 5 Ppjdpfxjy H H I Ie Al Sjr

Condition: like new (used), Year of construction: 2014, load capacity: 6 kg, arm reach: 1,450 mm, ROBOT BRAND: ABB MODEL: IRB 1600-6/1.45 TECHNICAL DESCRIPTION PAYLOAD: 6 kg MAX. REACH: 1450 mm YEAR OF MANUFACTURE: 2017 CONTROL SYSTEM: IRC 5 Single SOFTWARE: 6. WELDING EQUIPMENT FRONIUS TPS 4000 WITH WATER COOLING 3-AXIS POSITIONER ABB IRBP R 300 Ppsdoy H Hubopfx Al Ser

Condition: new, motor power: 30performance of pump: 65oil filling: 150messurements (LxWxH): 3700x1500x3200weight approx.: ca. 5000Cylinder: Ø 400pressure: 500Pressure adjustment via rotary knob Motorized control via hand lever Ppsdpfx Asutuy Nol Ser Handwheel for laterally movable cylinder Hydraulic unit mounted on the lower side next to the frame Clear opening: 1650 mm × 550 mm

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 1,300 mm, feed length Y-axis: 320 mm, feed length Z-axis: 450 mm, total height: 2,000 mm, total width: 2,100 mm, total length: 2,520 mm, table width: 360 mm, table length: 1,600 mm, type of input current: three-phase, table load: 500 kg, overall weight: 2,800 kg, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Vertical Milling Machine Vertical milling machines are characterized by the ability to move the entire spindle head along the column guideways. This machine is ideally suited for machining tools, fixtures, and engine components. Features Vibration-damping cast iron construction reducing vibrations and oscillations Protective guards compliant with current safety standards Automatic feed on all three axes Rapid feed on all three axes Digital display (DRO) Infinitely variable feed rate Servo drives ensuring precise and safe operation Large worktable with high load capacity Hardened and ground gears significantly reducing noise Central lubrication system Functional control panel for intuitive operation Adjustable head angle allowing various machining positions Table guard available as optional equipment. Technical Specifications Parameter Specification Table size 1600 × 360 mm Maximum table load 500 kg Table swivel angle -45° / +45° X/Y/Z travel 1300 / 320 / 450 mm X-axis feed rate 30–750 mm/min Y-axis feed rate 20–500 mm/min Z-axis feed rate 15–375 mm/min Rapid feed X/Y/Z 1200 / 800 / 600 mm/min T-slots 3 / 18 / 80 mm Spindle taper Horizontal ISO50 / Vertical ISO50 Ppodpjyuculjfx Al Sor Upper ram travel 550 mm Distance between vertical spindle and table 196–646 mm Distance between horizontal spindle and table 20–470 mm Vertical spindle speed (12) 60–1750 rpm Horizontal spindle speed (12) 60–1800 rpm Vertical spindle motor 4.0 kW Horizontal spindle motor 5.5 kW Feed motor power X/Y/Z 1.5 / 1.5 / 1.5 kW Servo drive 10 Nm Dimensions (L × W × H) 2520 × 2100 × 2000 mm Weight 2800 kg

Condition: new, Year of construction: 2024, R5 RA 1600 B 4EB XXXZ 4.00 PCS 05.12.2023 25,000.00 / 1 PCS 100,000.00 Explosion protection Ex Inside II 2G Ex h IIB T3 Gb X Outside II 3G Ex h IIB T3 Gc X Without motor Ex B5-550 d65 50/60Hz Coupling PKZ 20 ATEX Oil separator with: - Antistatic venting element - G3/4 for thermostat probe Heat exchanger 41.2kW without air cooler Base frame with bore d50 Vibration dampers 4xd100 + 3xd150 Cooling water inlet G1/2 vertical with temperature controller Water valve, bypass with ball valves, G1/2 coupling Cooling water outlet G1/2 vertical with G1/2 coupling Ball valve DN25 G1 in oil drain Without temperature switch in gas Without temperature switch in oil Without level switch G3/4 Filter differential pressure gauge elevated with angle Thermometer 0-120°C R1/2 with extension Without resistance thermometer PT100 valve side 4 units available Unit price !!!!! Podpfxoyzbd To Al Sspr

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 1,600 mm, load center: 600 mm, mast type: simplex, fork length: 1,150 mm, tire condition: 100 %, front tire type: polyurethane tires (non-marking), empty load weight: 250 kg, total height: 2,030 mm, total length: 1,642 mm, total width: 740 mm, color: yellow, Equipment: pallet forks, A mast trolley with a lifting capacity of 2000 kg is a versatile device used for unloading delivery vehicles as well as for work in warehouses and shops. Its solid construction ensures long service life, while the polyurethane wheels provide quiet and trouble-free operation. Technical Specifications Load capacity: 2000 kg Ppedpfx Aljytcmre Sor Lifting range: 85–1600 mm Fork length: 1150 mm Mast type: single mast Overall height: 2030 mm Height with forks raised: 2030 mm Overall length: 1642 mm Fork outer width: 550 mm Overall width: 740 mm Net weight: 250 kg Number of wheels (front/rear): 2 / 2 Wheel and roller material: polyurethane Steering wheel dimensions: 180 × 50 mm Roller dimensions: 75 × 70 mm Load center: 600 mm Fork width: 160 mm Fork height: 60 mm Fork inner width: 390 mm Adjustable fork spacing: Yes Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. Should you be interested in other machines please visit our website.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Maximal laundry measures: Length: 1000mm Width: 1000mm Height: 800mm Ppsdpfx Aloyzy Abj Sjr Diameter: 1400mm Max. load: 1000kg

Condition: excellent (used), Year of construction: 2001, overall weight: 16,000 kg, - Building year 2001 - Infeed height 350 / 400mm Psdjyzn S Djpfx Al Sepr - Infeed width 1.600mm - Rotor Ø 1.200 mm - motor 180 KW - Weight 16 to Possible drive power 160 - 400 KW Possible throughput up to 60 to/ h, with the right material and motor. Many parts are new as rotor bearings, infeed roller bearings, screen, hammer, anvil, etc. Optional: drive motor, electrical control, infeed shaker.

Year of construction: 2001, condition: excellent (used), - Building year 2001 - Infeed height 350 / 400mm - Infeed width 1.600mm - Rotor Ø 1.200 mm - Weight 16 to Podpoyzn H Ijfx Al Sspr Possible drive power 160 - 400 KW Possible throughput up to 60 to/ h, with the right material and motor. Many parts are new as rotor bearings, infeed roller bearings, screen, hammer, anvil, etc. Optional: drive motor, electrical control, infeed shaker.

Condition: used, Year of construction: 1973, pressure 1600 t distance between columns 3160 mm ram stroke 1450 mm distance table/blankh.,max. stroke up,adjustm. up 2250 mm table surface area 4000 x 2200 mm ram pressure 1000 t pressure of blank holder 600 t stroke of blankholder at the bottom 1000 mm stroke of blankholder with adjustment 0-100 mm 1450 mm blank holder size 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 275 / 400 mm ram surface 4000 x 2200 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Pedpfxjvxwhwe Al Sspr oil volume 9000 l total power requirement 390 kW weight of the machine ca. 250 t dimensions of the machine ca. 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons)

Year of construction: 1999, condition: good (used), functionality: limited functionality, !!! Important!!! The systems have now been dismantled. The system components are available for inspection. Offered here are two functional SLC (Surface-like Chrome) vacuum coating systems/evaporation systems from PVT GmbH. The third, non-functional system is no longer for sale. The system documentation is available in paper form and will be provided upon purchase. To operate the systems, a compressed air supply, power supply, and water cooling are required, which must be provided by the buyer. All other PVT processes are, of course, also possible. The system was primarily used to treat wheel rims. Other workpieces made of aluminum, steel, or plastic are also possible, such as bathroom/kitchen fixtures, motorcycle and car components, door and window handles, etc. What is the advantage of the SLC process compared to chrome plating: Ppsdpfsyzdm Rsx Al Ser - SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. The SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. - Significantly less susceptible to scratches and chipping - The process is more environmentally friendly and offers outstanding corrosion resistance - Costs are significantly lower Technical data: Chamber dimensions: approx. 1600 mm diameter and approx. 900 mm height Type: PVT 1600 SLC Manufacturer: PVT GmbH Year of manufacture: 1998/1999 Documentation: Available Control system: Allen Bradley PLC (automatic coating process including hardware)

Condition: good (used), Year of construction: 2015, functionality: fully functional, Stacker Baumann type NUP 1600, serial no. 53.300, load capacity 1,600 kg, max. format 1500 x 1185 mm. Immediately available. Pjdpfx Aoyy Sycol Sjpr

Condition: good (used), Year of construction: 1999, load capacity: 1,600 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, empty load weight: 1,300 kg, Taken in part exchange Electric stacker Psdpfx Aloyc Eygo Sspr Brand: BT Year: 1999 PALLET BLOCKS: external fork width 68 cm Capacity: 1,600 kg Lift height: 2,900 mm Overall height: xxx mm Battery: maintenance-free GEL with charger Watch the video on YouTube

Condition: reconditioned (used), Completely overhauled grinder for external and round grinding LŽT Kikinda, type AFC 630/1000/1600/2100 and UFC 630/1000/1600/2100 Machine Feature: Max. Spike spacing 630/1000/1600/2100 mm spike height 180 mm largest diameter of the workpiece 360 mm maximum workpiece weight 300 kg dimensions of the grinding wheel 500x203x100 mm The accuracy of the machine max. 5 microns Pedpfxev Tavms Al Sopr Electrical components manufactured by ABB, Schnieder Painting in the final color according to the customer's wishes Warranty on works: 6 months Delivery time: negotiable For more information, call.

Condition: good (used), Year of construction: 2011, Table size: 1800 x 800 mm Tool holder: DIN 69871 ISO 40 Travel paths: X-axis: 1615 mm, Y-axis: 815 mm, Z-axis: 725 mm Table load capacity: 2000 kg Spindle speed range: 0 - 10,000 rpm Feed rate: up to 10 m/min Rapid traverse: 24 m/min Space requirements (W x D x H): approx. 5400 x 4550 x 3120 mm Drive power: 15 / 18.5 kW Weight: 10,000 kg Accessories / Special Features: • CNC path control FAGOR • ICS coolant through spindle, 20 bar • 24-position tool changer • Hinged belt chip conveyor Ppedpfxoyy Npns Al Sor • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2017, operating hours: 4,898 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, CNC machining center, used Manufacturer: AWEA Model: BM-1600 Year of manufacture: 2017 Control system: Heidenhain iTNC 530 HSCI Ppjdpfx Asyy R Hzel Ser Operating hours Spindle hours: 4,898 h Total power-on hours: 18,739 h Working area: X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 800 mm Spindle: Speed: 10,000 rpm Power: 22/35 kW Taper: BT 50 Table: 1,700 x 800 mm Max. load: 2,000 kg Equipment: - 40-position tool changer - Through-spindle coolant 20 bar - Electronic handwheel - Left-side chip conveyor - Direct linear measurement The machine was used in-house for manufacturing products by an automation technology company. A significant amount of aluminum processing was done on this machine.