Used Reckermann Beta 10 for sale (30,473)

Condition: used, Year of construction: 1987, x-travel 720 mm y-travel 220 mm Ibjdpfx Aeyv N Hxen Iec z-travel 450 mm table surface area 1000x310 mm weight of the machine ca. 1.500 kg dimensions of the machine ca. 2000x1200x1800 mm

Condition: used, machine/vehicle number: #14200, Rotor diameter: 500 mm Rotor width: 1000 mm Number of rotor blades: 96 Number of stator blades: 48 Isdpfxsz Svb Rj An Isbc Inlet cross-section: approx. 500 x 1000 mm Drive motor: 45 kW

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Sharpening machine for carbide-tipped circular saws. Sharpens the front and rear edges in a single pass. Technically inspected. Isdpszl Snusfx An Iebc Technical specifications in the PDF.

Condition: good (used), Year of construction: 1997, For sale are 2 identical Atlas Copco screw compressors. Manufacturer: Atlas Copco Type: ZR 75 / 10 Serial Number: AIF 042705 = Compressor 1 Serial Number: AIF 053082 = Compressor 2 Operating Hours: 94620 h = Compressor 1 Operating Hours: 96461 h = Compressor 2 Voltage: 400 V Power (kW): 76 Air flow rate in m³/min: 10.4 Max. air pressure in bar: 10 Ibodpfx Asz Rntisn Isc Both compressors have been maintained by the manufacturer according to the maintenance schedule (reports available). After approximately 60,000 operating hours, a stage replacement was carried out on both units. The motor was also replaced on both compressors. The units are in good condition. Price: €6,900 per compressor Inspection is possible and encouraged (93499 Zandt).

Condition: good (used), Year of construction: 1981, Table size 1300 x 400 mm Tool holder DIN 2080 ISO 40 Travel ranges X-axis, automatic/manual 1000 / 1020 mm Y-axis, automatic/manual 350 / 370 mm Z-axis, automatic/manual 430 / 450 mm Speed range, 2 steps 32 – 1400 rpm Quill in vertical milling head yes Milling head, swiveling ± 90° Feed range X/Y-axis, stepless 10 – 1000 mm/min Feed range Z-axis, stepless 4 – 400 mm/min Rapid traverse X/Y-axis 5 m/min Rapid traverse Z-axis 1.8 m/min Drive power, vertical + horizontal 3.2/4 kW Ibeded D Tf Hjpfx An Ijc Space requirement L x W x H 3200 x 2700 x 2200 mm Weight 2400 kg Accessories / Special features: • NC point-to-point control HEIDENHAIN TNC 131 S • RS 232 interface • Stepless feed • Automatic and/or manual operation possible • Safety devices / prompts to secure the hand crank when the X-Y and Z axes are moved manually, as well as the manual tool clamping • Vertical and horizontal milling spindle • Quill in vertical milling head • Hydraulic axis clamping • Central lubrication • Coolant system Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2017, feed pressure / bar liter capacity / l Air consumption / m³/h Ibjdpfx Aoxy S H Tjn Iec

Condition: refurbished (used), Year of construction: 2024, machine/vehicle number: R-00719, load capacity: 10 kg, arm reach: 1,101 mm, controller manufacturer: R-30iB Mate Plus, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC LR-10iA/10 manufactured in 2024.03. The robot comes with an R-30iB Mate Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: LR-10iA/10 Model Number: A05B-1144-B201 Year of Manufacture Robot: 2024.03 Iedpfxjz R Syns An Iebc Warranty term (months): 12   Payload (kg): 10 Reach (mm): 1101 Repeatability (mm): ± 0.01 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Angle Mount Weight (kg): 46   Controller: R-30iB Mate Plus Year of Manufacture Cabinet: 2024.03 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: used, Year of construction: 2012, 2012 | Haulotte Star 10 | Used Vertical Mast Lift 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 29 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: All operations work during inspection, Fault code EP123, Hour counter cannot be observed, Main electric motor does not sound good (scraping), drive motors also audible. The maximum working height is 10 m. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40921 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Isdez Rmd Tepfx An Iobc

Condition: used, axle configuration: 1 axle, first registration: 10/2026, color: other, Year of construction: 1997, Empty weight: 4.740 kg Isdpfxoz H Ul Aj An Iobc Axle 1: left 12 mm right 12 mm Axle 2: left mm right mm Axle 3: left mm right mm

Year of construction: 2016, condition: used, Empty weight: 392 kg Dimensions of cargo space: 110 x 110 x 220 cm CE mark: yes General condition: good Technical condition: good Visual appearance: good Delivery terms: EXW Please contact Christian Theißen for more information Manufacturer: Kürten Model: CTF 10 Mt Year of build: 2016 Condition: Used Data: Max. height: 10,00 m Performance: 1,6 kW Continuous Power: 1.6 kVA (4 x 400 W) Lamp type: Metal Halide Illuminated area: 2.800 m² Light output: 144,000 lumens Required connection: 1 x 230 V / 16 A CEE Drive type: 230 V Operating noise: 0 dBA (0 LWA in dB) Transport dimensions LxHxW: 1,10 x 1,10 x 2,20 m Dimensions when set up: 2,32 x 2,32 x 10,00 m Ibedoz Rt Hzepfx An Isc Empty weight: 392 kg Location: 41468 Neuss immediately available

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, pivoting range: 135 °, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Digital speed display Hydraulic height adjustment Tilting range 0 to 130° Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Ibedpfx Aoxt Tgnen Ijc Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Ibedovmivcjpfx An Ijc Without guarantee - without warranty -

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams Ibsdpog Ailcofx An Iec 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 6,000 rpm, travel distance X-axis: 850 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, number of axes: 3, This 3-axis RECKERMANN VMC 850 was manufactured in 1999. It features an internal coolant supply and is equipped with a Heidenhain TNC 430 control system, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the RECKERMANN VMC 850 vertical machining centre we have for sale. Contact us for further details. Iedpfxezbu Abs An Ijbc • With internal coolant supply • Condition: Very good / Fully operational • Control System: Heidenhain TNC 430 Technical Specification Through-spindle Coolant Yes

Condition: used, Year of construction: 2000, Filter area: 10m2 Ibjdpfsz N D Ruox An Isc Instructions for use and spare parts list available

Condition: used, Year of construction: 2007, operating hours: 902 h, General information Year of manufacture: 2007 Drivetrain Drive: Wheel Weights Empty weight: 2.760 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.000 cm Dimensions of cargo space: 270 x 100 x 199 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average The Haulotte Star 10 is an electric vertical mast lift with a jib, designed for indoor maintenance, warehouse work, and access in confined spaces. Main Specifications Specification Value Working height 10.0 m Platform height 8.0 m Horizontal outreach 3.0 m Platform capacity 200 kg Platform size 0.78 × 0.98 m Overall length 2.7 m Overall width 1.0 m Stowed height 1.99 m Weight approx. 2,677 kg Power source 24 V / 250 Ah battery pack Drive speed 0.6–5 km/h Gradeability 25% Outside turning radius 1.88 m Turret rotation 345° Vertical jib movement 130° (+70° / -60°) Ground clearance 10 cm Features * Zero tail swing for working in tight areas. * Electric AC drive motors with smooth proportional control. * Can be driven at full platform height (up to 8 m). * Non-marking tires for indoor use. * Automatic battery watering system. * On-board diagnostic system (Haulotte Activ’Screen). * Forklift pockets integrated into the chassis for easier transport. Typical 2007 Model Data Most 2007 Star 10 units have: * 10 m working height Isdpsz I A Iujfx An Ijbc * 200 kg platform capacity * 3 m outreach * Electric 24 V battery system * Operating weight around 2.7 tonnes Exact specifications can vary slightly depending on the serial number, market version, and factory options. = More information = Number of owners: 1 Max. horizontal reach: 300 m Max swing of arm in degrees: 345 Please contact Bas Sindorf , ) for more information

Condition: ready for operation (used), Year of construction: 2011, - 10-head rotary bottle filling machine Isdpfx Ansz Ry Dae Iobc - suitable for liquids such as wine, juices, sauces, beverages, oil, etc. - for bottles and/or jars

Condition: used, plate width 1020 mm Ibjdpjz N Hwqjfx An Ioc plate thickness 4 mm diameter of upper rolls 110 mm total power requirement 2,2 kW weight of the machine ca. 900 Kg dimensions of the machine ca. 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine In excellent condition. The machine was completely overhauled in 2016.

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 1,750 kg, permissible axle load (axle 2): 1,750 kg, first registration: 01/2000, loading space length: 9,200 mm, loading space width: 2,400 mm, total length: 10,070 mm, total width: 2,480 mm, wheelbase: 6,700 mm, Year of construction: 2000, Axle configuration Rear axle 1: Max. axle load: 1750 kg Rear axle 2: Max. axle load: 1750 kg Weights Unladen weight: 2,340 kg Payload: 2,660 kg GVWR: 5,000 kg Functional Body manufacturer: Masta Dieplader Be Oplegger Openlaadbak Load bed height: 65 cm Maintenance, history and condition APK (Technical Inspection): valid until 04.2027 Ibedpfx Aoz Ih D Ijn Ijc Technical condition: good Visual condition: good = Company Information = Nidro cars Holland is located in the centre of the country and is the right place to buy your car, van or truck. The indicated price is the 'internet take-away price'. For questions or a test drive, please contact us: FIND OUR ENTIRE STOCK AT All types of trade are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: used, axle configuration: 3 axles, first registration: 10/2026, color: other, Year of construction: 1985, Carrying capacity: 22.850 kg HEAVY DUTY AANHANGWAGEN VERY NICE .BRAKE AXLES FRONT AXLE NOT GOOD. Isdpez Ip Alefx An Iobc

Condition: used, machine/vehicle number: G11762, Rotor diameter: 200mm Rotor width: 100mm Rotor blades: 32 rows Stator blades: 1 row Isdpsz N Ix Nsfx An Iebc Inlet cross-section: approx. 90 x 10mm Drive motor: 4.0 kW Mechanical feed device for extruder strands

Condition: good (used), Year of construction: 2016, The Regero 125-VT-10 is a hydraulically foldable seedbed preparer from 2016, designed for effective and fast seedbed preparation in the spring. With a working width of 5.40 meters and two foldable sections, this machine offers flexibility and efficiency in the field. The three independent cage rollers ensure uniform crumbling and compaction of the soil, resulting in an optimal seedbed for crops. Key Features: Ibodpfxez Rckis An Ioc 3 bedsYear of Manufacture: 2016Working Width: 5.40 metersFoldable Sections: 2 (hydraulically foldable)Number of Cage Rollers: 3 (independently working) Thanks to the hydraulic folding system, the machine can be transported and stored easily and safely without compromising working width or performance in the field. Machine has never been used. Pick-up location :Lennik België More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2460508, load capacity: 200 kg, lifting height: 8,000 mm, platform length: 980 mm, platform width: 780 mm, overall weight: 2,677 kg, fuel type: electric, tire size: 16 x 5 x 10,5, color: yellow, Technical data Year of manufacture: 2019 Drive: electric Working height: 10.00 m Platform height: 8.00 m Lateral reach: 3.00 m Platform dimensions (LxW): 0.78 x 0.98 m Maximum load capacity: 200 kg (1 person) Overall length: 2.7 m Overall width: 1.00 m Total weight: 2,677 kg Fully functional General signs of use Delivery optional Iedpfx Aoyqzarjn Iobc Rental optional

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2460538, load capacity: 200 kg, lifting height: 8,000 mm, platform length: 780 mm, platform width: 980 mm, overall weight: 2,677 kg, fuel type: electric, tire size: 16 x 5 x 10,5, color: yellow, Equipment: UVV, all wheel drive, Technical data Year of manufacture: 2019 Drive: Electric 24 V (2 x 12 V) Working height: 10.00 m Platform height: 8.00 m Lateral outreach: 3.00 m Platform dimensions (LxW): 0.78 x 0.98 m Maximum load capacity: 200 kg (1 person) Overall length: 2.7 m Overall width: 1.00 m Total weight: 2,677 kg Max. gradeability: 25% Fully functional. General signs of use All-wheel drive Isdpfx Anoyqzfnj Isbc Optional delivery available Optional rental available

Year of construction: 2015, condition: used, Technical information Power: 1 kW (2 HP) Empty weight: 392 kg Functional Dimensions of cargo space: 110 x 110 x 220 cm CE mark: yes Condition General condition: good Technical condition: good Visual appearance: good Other information Delivery terms: EXW Production country: IT Additional information Please contact Christian Theißen for more information Manufacturer: Generac Tower Light Model: CTF 10 Mt Year of build: 2015 Condition: Used Data: Max. height: 10,00 m Performance: 1,6 kW Location: 41468 Neuss: Available immediately Lamp type: Metal Halide Illuminated area: 2.800 m² Light output: 144,000 lumens Required connection: 1 x 230 V / 16 A CEE Drive type: 230 V Operating noise: 0 dBA (0 LWA in dB) Transport dimensions LxHxW: 1,10 x 1,10 x 2,20 m Dimensions when set up: 2,32 x 2,32 x 10,00 m Ibsdpjz Ildfsfx An Iec Empty weight: 392 kg Location: 41468 Neuss immediately available