Used Richter Pekrs 80 for sale (17,457)

Condition: used, Stainless steel welding line MOD.50/60, made OLIMPIA 80 with TIG welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 18 – 63.5 mm - Thickness : 0.5 – 3 mm - Length : 3 – 6 m - Speed : Up to 3 m/min Diameter: 18 – 63.5 mm Length: 3 – 6 m Iaedeymautopfx Ap Heu Speed: Up to 3 m/min

Condition: used, Single column eccentric press PELS - RICHTER type PEKR 125 Machine. No. 20684 Year of construction 1967 pressure force 125 ton. throat 430 mm table size 1100 x 750 mm ram area 890 x 650 mm table opening Ø 400 mm stroke adjustment 6 to 115 mm ram adjustment 100 mm installation height largest stroke top max. 450 mm Clamping spigot bore Ø 50 mm Stroke rate 60 strokes/min. Table height above floor 900 mm motor power 7,5 kW Mains connection 380 Volt, 50 Hz - Overload protection by crushing plate in ram - Compressed air clutch-brake combination DESCH - ram weight balancing cylinder - manual ram adjustment - two-hand operation - cam gear - Grease central lubrication Vögele - stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm weight approx. 10 ton. Iajdpfx Asfim Thop Hou good condition

Condition: used, Stainless steel welding line MOD.70/120, made OLIMPIA 80 with tricathode welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 35 – 120 mm - Thickness : 0.7 – 3.5 mm Iedevtn H Topfx Ap Hsau - Length : 3 – 6 m Tube diameter: 35 – 120 mm Thickness: 0,7 – 3,5 mm Tube length: 3 – 6 m

Condition: excellent (used), Pressure gauge, test pressure gauge, pressure gauge with Bourdon tube, pressure and temperature measurement technology, contact pressure gauge Isdpfxoiraxuo Ap Hoau -Manufacturer: Richter, manometer pressure gauge with limit signal transmitter -Type: 0 to 6 bar -Limit signaller: Type M1 -Screw connection: see photos -Dimension: 170/135/H135 mm -Weight: 2.1 kg

Year of construction: 1959, condition: used, pressure 65 t throat 370 mm stroke 29-151 mm no. of strokes 50 Hub/min ram - range of adjustment 80 mm Iodpfxjlp U E Hj Ap Hjau table surface area 1300x700 mm ram surface 1000x600 mm hole in the table ¦ 110 mm table height 800 mm tool hole in ram Ø 40 mm weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1700x2000x2800 mm

Condition: used, Year of construction: 2015, Recycling system for recovering and separating plastic and rubber products from textile reinforcements, such as various types of rubber hoses, PVC, tarpaulins, banners and other plastic materials in which textile reinforcement occurs. The system cooperates with a granulation group and a separation system. Hourly capacity: 50 - 80 kg/h Infeed dimensions: 270 x 120 mm + fi 80 mm Blade length: 3x2 + 2x2 Rotor diameter: 250 mm Isdpfx Apowpkw Ee Hoau Cutting length: 600 mm Engine power: 22 kW Dimensions: 3200 x 3000 mm Height: 2500 mm Weight: 1000 kg Year of production: 2015 Technical condition: used machine, all engines in working order. No top cap with dimensions: 400x300 mm used for loading the product. Full and original technical documentation available. .

Condition: used, machine/vehicle number: 1001, WP-UC 80 stainless steel bowl Ijdpfxjc Upuqe Ap Hsau on stanchions for the UC 80 AC mixer Top condition

Condition: new, Year of construction: 2025, Manual operation with our ultrasonic cleaning technology, analogue control panel and temperature control via a digital thermostat Optional functions can be added to the PRO series. We have volumes from 60 to 7,500 L to meet all requirements. Tank capacity: 110L Iajdpef Hqavjfx Ap Hou Außenmasse:1970x670x970mm Useful dimensions grate:550x350x250mm Ultrasonic frequency: 40kHz Ultrasonic power:1000W

Condition: used, pressure 160 t dayligth 600 mm stroke 25 - 150 mm table surface area 1500 x 900 mm ram surface 1500 x 900 mm ram adjustment 100 mm daylight between the columns 1500 mm daylight between the side columns 400 x 200 mm distance between columns 1680 mm weight of the machine ca. 15 t dimensions of the machine ca. 2,7 x 1,8 x 4,4 m Iaedpfx Apscgqvpj Hsu

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, pressing force: 80 t, stroke length: 290 mm, operating speed: 90 mm/s, table height: 950 mm, throat depth: 1,000 mm, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, overall weight: 6,800 kg, controller manufacturer: Safan, controller model: TS1, working width: 2,550 mm, bending force (max.): 80 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, warranty duration: 3 months, control type: CNC control, actuation type: electric, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Iedpfsut S E Nex Ap Hjau Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: used, 🧰 Product Features • Condition: Used item, see photos • Colour: grey • Material: metal • External dimensions: 124 x 83.5 x 97 cm • Load capacity: 1000 kg • Stack load: 5000 kg • Weight: 78 kg • Front side: foldable • Base: sheet metal floor with wooden insert 💰 Price €99 net, excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: by appointment at any time Over 5000 linear metres of pallet racking from numerous manufacturers constantly in stock Iaodovb T Ewjpfx Ap Hou (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.)

Condition: good (used), profile bending machine Iaedjwtph Dopfx Ap Heu

Condition: good (used), Year of construction: 2007, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain 530, controller model: Heidenhain ITNC 530, rotational speed (min.): 8,000 rpm, spindle speed (min.): 8,000 rpm, coolant supply: 20 bar, number of spindles: 1, input voltage: 29 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hedelius C80, used, fully operational. The machine has always been maintained by Hedelius over the years to keep it up to standard. (New spindle, new guides, etc. – invoices and documentation available) Spindle hours: 14,000 h 3-axis machining Coolant filtration system Iasdpfx Ajy Rmv Hsp Hou Pendulum operation, mountable partition available Heidenhain 530 ICS 20 bar (internal cooling) Handwheel Measuring probe SK 40 Tool changer Total weight: 15 t, Transport dimensions approx. 6500x3000x3000 mm

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Ijdpfx Aozdnxgjp Hjau Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2017, operating hours: 34,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, Clamping unit: Clamping force 800 kN Mould opening force, max. 55,3 kN Travel force movable platen opening 31,1 kN Travel force movable platen closing 22 kN Size of mould platens (h x v) 720 x 670 mm Distance between tie bars (h x v) 470 x 420 mm Mould opening stroke 500 mm Mould height min 250 mm Max. daylight 750 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 40 mm Ls/D ratio 20 Injection pressure 1860 bar Stroke volume 201 ccm Shot weight (PS) 182,9 gr. Injection rate 126 ccm/s Screw speed 295 1/min Plasticising rate max. 26 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 15 kW Installed heating capacity 11 kW Adjustable barrel heating zones 5 Oil Reservoir capacity 400 ltr. Dimensions and weights: Dimensions of the machine ca. 4,50 x 2,00 x 2,20 m Total machine weight 3900 kg Max. mould weight 995 kg Accessories: - Anti vibration pads - Anti vibration pads - 8-fold water distributer - BluePower - Krauss Maffei Robot SPX10 Iedpfxozd Amxe Ap Hoau Additional Options: - 1 x Air valve - 1 x hydr. core pull - Robot interface according to Euromap 67 - 8 x hot runner controller

Condition: used, Installation of power converter for switching and rectification The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Iajdpfx Aozdu S Top Hju than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), CTS Temperature Shock Test Chamber Type: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS temperature shock test chamber for temperature change and shock testing in industry, research, and development. Technical data: Test chamber volume: approx. 32 liters Max. test specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature change rate: up to approx. 100 K/min Changeover time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.7 kW Rated current: approx. 15.4 A Fuse: 16 A slow-blow Protection class: IP 22 Refrigerant: R404A: 2.3 kg / R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: approx. 650 kg Further data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" male Equipment: Two-chamber system (hot / cold chamber) Digital CTS control Display / control panel Program operation Operating hour counter Observation window Interior lighting Temperature limiter Test specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick start guide available Safety data sheets available Note: The table shown in the photos is not included in the sale. Iajdpfx Aey I Ntcep Heu Condition: Used Optical condition see pictures Scope of supply as shown in the pictures Inspection possible by appointment. Loading can be organized. Commercial sale (Changes and errors in the technical data and information are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2004, functionality: fully functional, total length: 880 mm, total width: 700 mm, Equipment: type plate available, Belt Conveyor/Conveyor Belt Manufacturer: Transtechnik GmbH Year of manufacture: 04/2004 Condition: Used Model type: 80/600 Total length: 880 mm Total width including motor: 700 mm Total width without motor: 650 mm Belt width: 595 mm Iaodpfx Asyg Nqqjp Hou Belt type: smooth Color: Stainless steel/black Material: Stainless steel/aluminum Frame height: 100 mm Drive type: drum motor Internal item number: 2026013003 Thanks to the excellent workmanship of the conveyor technology, your materials glide smoothly to their destination even under heavy load. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods – we are your experienced partner! We are happy to provide you with a customized offer or advise you on design and installation matters. Simply inform us of your requirements and local conditions. Benefit from our many years of experience and our outstanding network of experts. We have already successfully implemented projects for companies in various industries, such as logistics, pharmaceutical, crafts, and electronics sectors. Together, we will develop solutions to optimize your processes and material flow efficiently and sustainably. We can also offer fully automated sorting technology or additional components such as order picking racks or containers.

Condition: good (used), Technical data: Manufacturer; Interroll Condition: Good ( Used ) Max. load: 50 Kg Belt speed: 1,0 m/s Lifting time: 0,3s Iasdsfd Hapspfx Ap Hou Rated voltage: 24V/48V Drive motor and lifting motor Control: Multi Control 6 pieces in stock Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will be happy to provide you with an individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully implemented projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: new, number 80 Positionen weight 150 kg condition neu 28 mm dimensions 0,8 x 0,6 x ,05 m Special 80-piece set, 28mm system Iaodpfxsyv I Eys Ap Hou Material: Burnished high-quality steel Scope of delivery: see images Table not included!!

Condition: excellent (used), Electro-hydraulic lifting device, linear drive, linear gearbox, lifting gearbox, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, actuator motor, actuator cylinder for rotor brake, disc brake, electro-hydraulic disc brake, crane brake, electro-hydraulic lifting device, lifting drive -Manufacturer: EMG Eldro Electro-hydraulic lifting device, unused -Type: Eldro Ed 80/6 -Item no.: 1045 2806 lifting drive Eldro Ed 80/6 -Stroke: 60 mm -Shaft: Ø 20 mm -Quantity: 3 pieces available -Price: per piece -Dimensions: 490/190/H255 mm Ijdov Hxw Aspfx Ap Hjau -Total weight: 22 kg/pc.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Iasdpfszdnr Hox Ap Hou

Condition: used, Electric chain hoist, DEMAG Type DKM 1-80 K V2 F4 Manulift Manufacturer's No. 63904165, Year of manufacture 1998 Load capacity 80 kg Hook travel 2.8 meters Lifting speed 14 m/min Fine lifting speed 3.5 m/min Motor power 0.34 / 0.09 kW Iaedpfx Apjzd Hi Rs Heu Mains connection 400 Volt, 50 Hz 1 load chain = 80 kg Manulift hand control directly on the crane hook Weight 18 kg Good condition

Condition: used, Electric chain hoist crane DEMAG, type DKM 1-80 K V2 F4 Manulift Manufacturer's serial number: 63158144, Year of manufacture: 2000 Load capacity: 80 kg Hook travel: 3 meters Lifting speed: 14 m/min. Fine lifting speed: 3.5 m/min. Isdpfszd Hi Djx Ap Hsau Motor power: 0.34 / 0.09 kW Power supply: 400 volts, 50 Hz 1 load strand = 80 kg Manulift hand control directly on the crane hook Weight: 18 kg Good condition

Condition: ready for operation (used), Year of construction: 2001, A Fischer CNC 5-axis multi-machining center is available. Spindle power: 7.5kW, spindle speed: 18000rpm, tool positions: 12, clamping elements: 8, working length: 7000mm, clamping stroke: 60mm, clamping range: 380mm, max. spindle tilt: 90°, stop stroke: 60mm, stop width: approx. 250mm, tool holder: HSK-40E, max. saw blade diameter: 200mm, machine dimensions X/Y/Z: approx. 8200mm/2450mm/3200mm. Documentation available. An on-site inspection is possible. Iaedpfxozdumqs Ap Hju