Used Rico Gmbh Capper For Swing Top Bottles for sale (76,481)

Year of construction: 2026, condition: new, Screening machine | Oscillating screen type ASM-550 Demonstration machine - Make: S&F GmbH Fgsdpfx Aextfv Iofush - Type: ASM-550 - Screening capacity: approx. 60 - 70 m³/h (for wood chips and sawdust) - Screening area: 5.4 m² - Fractions: 3 or 4 pieces - Screen decks: 3 pieces - Drive power: 4.0 kW - Machine weight: approx. 3,800 kg - Machine colour: RAL 6011 Reseda green - Screen inserts and material outlet freely selectable Suitable for screening the following bulk materials, among others: - Wood chips and wood shavings - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibrating screen machine | Flat screen | Vibrating screen | Roll sifter | Screening machine for wood chips

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, 6 station swing arm inserting machine General overhaul 2022 PLC controlled Fgodpfx Afedygvqsush Color touch panel for user guidance Any kind of reading can be integrated

Condition: used, Compact dust collector, dust extraction system HURRICAN Type Tonga BG32 / ST / 27-3000 Filter system, extraction system, central extraction system, cartridge impulse filter, dust extraction Cartridge filter system, rectangular filter system, central fume extraction system Ideal for plastics, metals, wood, etc. Manufacturer: DAMBAUER GmbH Air and Environmental Technology Brand: HURRICAN Model: Tonga Machine No. 50313000 62187 Year of construction 2014 Nominal volume flow 3000 m³/h Nominal volume flow 50 m³/sec Filter area 27 m² (9 pieces, each with 3 m²) Differential pressure 3699 Pa Fjdpfsz Db Niex Afuogh Extraction connection at the filter inlet Ø 250 mm Extraction diameter max. 355 mm (manufacturer's specification) Exhaust connection at the filter outlet 600 x 600 mm Compressed air connection 5 bar Compressed air requirement 60 standard liters per cleaning impulse Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Filter control via SIEMENS PLC S7-1200, with touch panel - Pneumatic filter cleaning, automatic via control - Control cabinet mounted on the extraction system - 9 filter cartridges, Type 51065081200, Ø 160 mm, length 1180 mm - Maintenance flap for filter replacement - Radial fan installed on the top inside, Type VUVI 500 DF - 2 mobile dust collection containers, each approx. 106 liters (ECO bins) - Firewater connection with sprinkler nozzle in the filter chamber - Electrical wiring diagram available - Silencer on the air outlet side 600 x 600 x 1000 mm Space requirement L x W 1850 x 1500 mm Width with silencer on the air outlet side 2500 mm Overall height 4050 mm Footprint 1080 x 1080 mm Weight 820 kg (manufacturer's specification) Weight 1070 kg (weighed) Very good condition Transport dimensions for horizontal transport: Length 420 cm x Width 190 cm x Height 200 cm Transport weight: 1150 kg

Condition: used, Year of construction: 1984, Glass bottle filler and capper equipped with short-tube filling valves for filling bottles to a specific level (volume filling). The bottles are pre-evacuated (11 kW vacuum pump from GEA Ahlborn). Additional title: Short-tube filler with pre-evacuation and crown cap sealer Capactity: 44000 bo/h Number of filling valves: 90 pcs. Fgodpfxozi Alxo Afuoh Number of capping heads: 15 pcs. Formats: 0,5 l NRW bottles; crown caps Material: housing and contact surfaces from stainless steel Base construction: caroussel-type filling and capping block Features: filling carousel with 90 short-tube filling valves; crown cap sealer with 15 sealing heads; vacuum pump; bottle and cap rinse; bottle conveyor with drives and format components; protective housing with doors; control cabinet with fittings; control panel with touchscreen

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, spindle speed (max.): 24,000 rpm, Gravograph IS 6000 IQ – CNC engraving machine – approx. 500 operating hours For sale is a very well-maintained Gravograph IS 6000 IQ with only approx. 500 operating hours. The machine is suitable for engraving and milling operations, for example, for the production of signs, lettering, and custom engravings. Machine data: Manufacturer: Gravograph / Gravotech Model: IS 6000 IQ Year of manufacture: 05/2016 Operating hours: approx. 500 Condition: used, very well maintained Equipment: Engraving software GS8-GRAPHIC incl. dongle Sturdy machine table with T-slots for workpiece clamping Fedpoz D Htgsfx Afuegh Matching base frame Wired hand control unit Extraction system on the machining head Spraying device 750 W high-frequency spindle kit for the IQ series according to the order confirmation from November 2017 The machine was purchased in December 2016. Its excellent condition and low usage with only approx. 500 operating hours are particularly noteworthy. Price: net 12,500 EUR Location: 09627 Bobritzsch-Hilbersdorf Availability: immediately If you are interested, we look forward to receiving your inquiry.

Year of construction: 2017, condition: excellent (used), Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows you to choose whether the cut is triggered mechanically (e.g., on the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the processing is extremely tool-friendly. The pipes remain almost completely dry and free of coarse contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging directly integrated). Due to two separate box output stations (rear sluices with sliding doors), the system automatically switches to the second station when a box is full. The removal of the finished KLT boxes takes place in parallel with the main operating time without machine downtime. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest changeover times in non-cutting separation Material-saving and free of contaminants Chip-free Easy to maintain No cooling and lubricating agents required Fodpszw Ukcsfx Afuogh Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs are possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimped ends) Sensors & positioning: Optical sensors for the automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feed (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths using a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard and mouse Setup operation: Mobile Siemens Teach-In terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety polycarbonate windows Logistics / output Integrated box placement station 2 separate box output stations for rear removal via protected sluice systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in excellent optical and mechanical condition.

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Fsdpfx Aozp E T Sjfuegh Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning, rotary valve airlock, silencer, frequency inverter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the cleaned return air was fed back into the production area. The filter system is labeled with H1 and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Fjdpfx Afez Ikzpjusgh Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial No.: 000909 Airflow rate: 10,500 m³/h Filter area: 62.5 m² Weight of the filter system: approx. 1,600 kg Filtration: surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter unit: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is separately rated with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency inverter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary valve airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of blades: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Capacity: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: The system includes: - Silencer, connection Ø 400 mm - Return air duct to the production hall - Complete system control - Danfoss frequency inverter - Automatic pneumatic filter cleaning - Rotary valve airlock - Extensive galvanized dust extraction and return air ductwork Large parts of the existing pipelines can be taken over after consultation. The system is still in its assembled condition. This allows the installation, duct routing and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Removal by: July 31, 2027 at the latest The system is sold in its current assembled condition. Dismantling, removal, loading and transport are entirely the responsibility of the buyer and at their own expense. If sold abroad, transport, export/import and customs duties will also be borne by the buyer. Inspection possible by appointment. Sale as is, without warranty. Selling price: 15,500.00 EUR Price net, any applicable taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Year of construction: 2018, condition: ready for operation (used), Work piece handling system manufactured in 2018. This TOP Automazioni Top Loader ETL 10-75 has a total weight of 2500 kg. If you are looking to get high-quality handling capabilities, consider the TOP Automazioni Top Loader ETL 10-75 machine we have for sale. Contact us for further details. Fgedpfx Afez Arkdeush - Total Weight: 2500 kg

Condition: used, Year of construction: 1997, machine/vehicle number: 67924, Kerzenfilter für 3 Filterkerzen mit 20" länge. Fodpfsz Ri Twox Afuegh

Condition: new, functionality: fully functional, Year of construction: 2026, New machine Vertical broaching machine VADARI GmbH TYPE SRM 2027-60 KN - also 90 KN or 120 KN possible! BROACHING MACHINES MADE IN GERMANY. Fedpeuqbnhefx Afuogh Promotion: Currently comes with a free tool set (broaching pins and corresponding holders). Note: The machine can also be offered and manufactured in a version with a pulling force of 90 KN (9 tons) or 120 KN (12 tons). ==> Information for manufacturing companies or dealers with their own manufacturing: If desired, the drawings, rights, spare parts, customer and prospect data, planning and manufacturing documents (including plans for a version with 9 tons of pulling force) for the broaching machine can be purchased from us. Please contact us if you are interested. ==> The new machines are manufactured by us according to customer specifications after ordering. Short-term manufacturing & delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for short-term delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special pins for internal gearings, etc.) and accessories available. Please request separately. All broaching tools and tool holders from other manufacturers can be used with our broaching machine! Complete manufacturing and assembly at our factory in Germany. Furthermore, we also offer spare parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears, and all other required components - including electrical parts). Vertical broaching machine Type SRM 2027 - NEW MACHINE: 60 KN version: The range of applications mainly includes the production of keyway grooves from 3-28 mm (but also larger) and profiles of similar dimensions. The compact and space-saving machine can therefore be used successfully in small, medium and large companies. The low price justifies the purchase even for small series and individual production. The drive is via a pole-reversible geared brake motor. The maintenance-free double spindle drive ensures smooth operation and a central pull point, as well as constant cutting performance. The free tool table allows even large workpieces to be placed without hindrance. In most cases, the workpieces to be broached do not need to be firmly clamped. The stroke adjustment is carried out by adjustable limit switches with stroke limitation. With short hubs/workpieces, several workpieces can be placed on top of each other. Broaching pins, mandrels and spare parts on request. Technical data: Pulling force: 60 KN at 3m/min, 40 KN at 6m/min. Broaching speed: 3m/min + 6m/min. (Optional: stepless speed adjustment (from 0 m/min to 6m/min possible with extended electronics) Return speed: 6m/min. Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: any Work table: 450 x 350mm Table hole: 140 mm Weight: approx. 510 kg Floor space: 750 x 570 mm Overall height of the machine: 1510 mm Drive power: 3.7 / 4.4 KW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 Safety door: Standard equipment Coolant system: Standard equipment The machine complies with the current Machinery Directive and has the CE marking.

Condition: used, Cryogenic gas tank semi-trailer CRYOBASE Fgjdpfx Afsznb Nysuoh used for liquid oxygen, nitrogen and argon Capacity: 24 m³ Date of first registration: 29.09.2025 Pump, flow meter, vaporizer, vacuum insulation. New technical inspection (HU), vacuum and leak test. We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter Fgodpfjz Hngmjx Afush The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 13100019, type of input current: three-phase, overall weight: 1,000 kg, For sale: a professional log edging saw (optimizing saw) from the renowned German company Winter Holztechnik, model Optimax 100. The machine is fully functional, regularly serviced, and ready for immediate operation. It is ideally suited for the fast and precise removal of defects and the preparation of elements with fixed lengths in joinery workshops. Fgodpjzzw Ulefx Afush Key features and advantages: PLC control: Intuitive touchscreen panel for easy programming. Multifunctionality: Capability for sequential cutting (memory for up to 10 dimensions) and cutting lines marked with fluorescent chalk. Efficiency: The machine can replace the work of several people, offering a speed of up to 80 cycles per minute. Precision: Very high cutting accuracy of +/- 1 mm. Technical data: Saw motor power: 7.5 kW. Feed motor power: 2.0 kW (feed speed continuously adjustable up to 80 m/min). Cutting height: max. 100 mm. Blade diameter: Ø 455 mm (bore 30 mm). Minimum material length: 300 mm. Power supply/Air: 400V / 8 bar.

Condition: used, functionality: fully functional, Year of construction: 1994, actuation type: hydraulic, cutting angle (max.): 1 °, stroke rate (min.): 6 1/min, stroke rate (max.): 10 1/min, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, input voltage: 380 V, oil tank capacity: 130 l, overall weight: 22,000 kg, Equipment: CE marking, safety light barrier, RICO HGR 606 hydraulic guillotine shear For sale: a RICO HGR 606 hydraulic guillotine shear (manufactured by Tomas Castro Silva, Lda., Portugal), year 1994. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Machine number: 823 Cutting length: 6,000 mm Cutting capacity: 6 mm carbon steel / 4 mm stainless steel Cutting angle: 1° Fgjdpsz Hk R Iofx Afush Cutting rate: 6-10 strokes/min 31 hold-down clamps (15mm pitch) Programmable back gauge with electronic encoder, 0-1,000mm range (RD 12/15 kit) Hydraulic oil tank: 130 l Weight: approx. 22,000 kg Main motor: 15 HP — Back gauge motor: 0.5 HP Power supply: 380V Safety: light barriers and safety relay, with a formal safety compliance assessment (RD 1215/1997) already carried out, and the corresponding safety kit already installed and operational. For technical questions or to arrange a visit, please contact us by email – we are happy to answer any questions or send further photos/videos of the machine in operation.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D Fodpfxsznz Ezs Afuogh • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 24-042, overall weight: 200 kg, type of input current: AC, input voltage: 230 V, belt width: 400 mm, Magnet with neodymium head roller (can also separate slightly magnetized stainless steel parts), small conveyor belt (drum motor), and feed chute. Fjdpfxjz Ihbge Afusgh The conveyor belt and feed chute are adjustable. The machine is mobile on rollers, available immediately, and the price may be negotiable.

Condition: used, Year of construction: 2016, Offered is a pad printing machine with protective enclosure. Equipped with plate holder, printing pads and remaining inks, where available. Operating usage: approx. 4000 cycles/year. Weight: approx. 400kg. Overall dimensions X/Y/Z: approx. 1300mm/1000mm/1790mm. Inspection possible by arrangement. Fsdpfx Afoz Irl Noujgh

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Fgsdpfoz Ag Rrox Afuoh - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Fodpfx Afezizkyjusgh Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Fjdpfxozqucfj Afujgh Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Fgjdpjzz Rpcsfx Afujh Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. Fgedpfoz Agv Uox Afueh - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Fgodjz Agw Eopfx Afush - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece Fgjdpfxszmzbme Afush • 0.5 mm x 1 piece • 0.16 mm x 1 piece • 0.9 mm x 1 piece • 0.86 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.