Used Romer Curing Oven Sl Series for sale (7,163)

Condition: good (used), EKU C9F-6GS 6-burner natural gas range Godpoztkf Isfx Aqgsuh Cooktop (gas burners) Number of cooking zones: 6 independent gas burners. Burner configuration: Divided into two performance classes for flexible pot sizes: 3 x small/medium burners: each 3.5 kW (burner head diameter approx. 80 mm) 3 x large high-performance burners: each 6.0 kW (burner head diameter approx. 110/120 mm) Total cooktop output: 28.5 kW gas output. Features: Cast iron pot supports (slide-out grates) and thermoelectric flame failure device on each burner for maximum operational safety. Oven (under-counter) Type: Gas-powered large-capacity oven (statically heated) with piezoelectric ignition. Oven output: approx. 8.0 kW to 9.0 kW burner output. Internal dimensions: Suitable for gastronorm racks and trays (GN 2/1). Temperature range: Adjustable from 100 °C to 300 °C via a safety gas thermostat. Connection values Total connection value (gas): approx. 36.5 kW to 37.5 kW (sum of cooktop and oven). Gas type: Standard setting for natural gas (20 mbar) (can be converted to liquefied gas/propane by changing the nozzles). Gas connection: R 1/2" or R 3/4" thread. Dimensions and weight Appliance external dimensions: approx. 1200 mm (width) x 900 mm (depth) x 850 mm (height) – suitable for the standardized 900 series of large kitchen modules. Material: Housing and top completely made of stainless chrome-nickel steel (CNS / stainless steel). "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning. Guedpsfz Apqofx Aqgsh

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, power: 9.8 kW (13.32 HP), input current: 16 A, inner dimension length: 80 mm, inner dimension width: 120 mm, inner dimension height: 16 mm, total length: 140 mm, total width: 153 mm, total height: 200 mm, overall weight: 600 kg, number of chambers: 4, actuation type: electric, fuel type: electric, Wiesheu EBO 128-S multi-deck oven Separate control for lower and upper heating elements 4 decks, deck height: 16.5 cm Oven is mobile with locking mechanism Modular construction Connection: 400V, 16A-CEE plug Dimensions: 1530 x 1400 x 2167 mm (W x D x H) Used oven Gsdezylhwepfx Aqgjuh

Condition: used, Year of construction: 2006, Salva Triple Deck Oven Model NXM-20 Year 2006 In excellent condition Ket Deatures • Outer dimensions per deck 1452 x 1316 x 315 mm • Internal Chamber Dimensions: 952 x 911 x 200 mm • Capacity: 9 pizzas (ø 30 cm) or 2 trays (760 x 460 mm) per deck • Power Output: ~8.2 kW • Voltage: 230/400V (22.8/12.4 A) • Frequency: 50/60 Hz • Weight: ~170 kg (per module / deck) • Maximum Temperature: Up to 400°C / 725°F • Heating Elements: Ni-Cr ceramic heating elements embedded in refractory materials for uniform heat distribution Gusdpfxsz Hmgre Aqgeh

Condition: used, VÖTSCH Industrial drying cabinet / chamber dryer / chamber drying oven Vötsch VTL 75/100 Industrial convection drying cabinet up to 250 °C with 562 liters of usable volume For sale is a used industrial drying cabinet from Vötsch Industrietechnik GmbH, model VTL 75/100. The VTL 75/100 is an electrically heated chamber dryer for industrial drying, heating, and tempering processes. The VTL series is designed for drying processes with controlled exhaust air extraction and takes into account the safety requirements of EN 1539. The unit features a spacious drying chamber with removable wire mesh shelves, an insulated door with an all-round seal, and a side-mounted control and operating unit. Technical data: Gujdpfx Ajz N Am Isqgoh Manufacturer: Vötsch Industrietechnik GmbH Type: VTL 75/100 Equipment type: Industrial drying cabinet / chamber dryer Rated temperature: 250 °C Rated voltage: 3/N/PE AC 400 V ±10 %, 50 Hz Connected load: 20 kW Rated power: 18 kW Rated current: 29.0 A Usable volume: 0.562 m³ / 562 liters Steam volume: 0.998 m³ Minimum exhaust air volume flow: 240 m³/h Internal dimensions according to manufacturer: Width: approx. 750 mm Height: approx. 1,000 mm Depth: approx. 750 mm External dimensions according to manufacturer: Width: approx. 1,470 mm Height: approx. 1,900 mm Depth: approx. 1,210 mm Empty weight: approx. 475 kg The external dimensions and weight are manufacturer's specifications for the VTL 75/100 model size. Deviations may occur depending on the specific equipment. Equipment: Electrical heating Convection system with fan Exhaust system with fan and air duct JUMO dTRON 304 temperature controller Additional digital display and control unit Several removable wire mesh shelves Insulated drying chamber Single-leaf door with all-round seal Side-mounted control cabinet with operating elements Main switch and indicator lights Electrical control and switching components Application areas: Industrial drying processes Drying of coatings and paints Heating and tempering of components Material testing and heat treatment Production and manufacturing processes Research and development Scope of supply: 1 x Vötsch VTL 75/100 industrial drying cabinet Wire mesh shelves as shown in the pictures Other equipment as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear Shipping by freight forwarder is possible upon agreement. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, This listing is for the Carbolite PF30 Oven The unit is in full working condition and is ready for immediate use Summary The Carbolite PF30 is a versatile, reliable 28 L benchtop oven, offering: Fast and even heating up to 300 °C Excellent stability and temperature control A durable design with flexible configuration options Safety and efficiency suitable for a range of laboratory and industrial uses Gedpfxsxhfnyo Aqgeuh Standard Features Fan‑convection design ensures faster warming, uniform temperature distribution, and quicker recovery than natural convection models. R38 digital PID controller offers precise, stable control for models PF30 through PF200. Chemically resistant stainless steel liner for durability. Lever-latch door with an airtight silicone seal, minimizing heat loss and improving efficiency. Meets safety standard BS EN 61010‑2‑010:2003 for lab equipment safety compliance. Customizable Options (Specify When Ordering) Over‑temperature protection, ideal for protecting samples during lengthy unattended runs. Advanced digital controllers: Programmable or segment-style controllers with RS‑232/485 or Ethernet connectivity. Thermocouple ports, cable entry, lockable doors, stacking frames, door‑isolating switches, viewing windows, interior lighting, air exhaust fans, moisture extraction, etc. Stoving & curing option, designed for solvent removal—includes exhaust fan and safety vent panel (not compatible with viewing window). Low-voltage variants, floor stands (fixed or castor-mounted), routine spares kits, reinforced shelves, and more.

Condition: used, This listing is for the Carbolite Gero AX Oven The unit is in full working condition and is ready for immediate use Overview: Carbolite Gero AX Laboratory Oven (Apex Series) The Apex AX series by Carbolite Gero comprises compact, bench‑top laboratory ovens designed for reliable and economical heating tasks up to 250 °C. It includes three models differentiated by chamber size: AX30, AX60, and AX120. Key Features Temperature Control: Uses an R38 digital PID temperature controller for precise and stable temperature management. Heating Mechanism: Employs fan‑assisted convection for rapid heating and uniform temperature distribution. Guodsxhfn Tspfx Aqgeh Construction: Has a chemically resistant stainless steel liner, ensuring durability and easy cleaning. Shelving: Comes with two adjustable nickel‑chromium plated wire shelves. Door: Features a lever‑latch door with an airtight silicone seal to maintain chamber integrity. Safety Compliance: Meets BS EN 61010‑2‑010:2003 safety standards for laboratory equipment.

Condition: good (used), Tom Chandley Triple Deck Oven Each deck has top and bottom heating controls Digital oven temperature display Manual thermostat control 150 to 600 including on/off facility In excellent condition Gujdpjz Hmkqsfx Aqgjh

Condition: used, Year of construction: 1989, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 5399 195, type of input current: three-phase, total length: 6,830 mm, total height: 1,490 mm, total width: 1,400 mm, feed length X-axis: 80 mm, feed length Y-axis: 20 mm, feed length Z-axis: 80 mm, input voltage: 400 V, overall weight: 2,100 kg, compressed air connection: 60 bar, air demand: 60 m³/h, input current: 63 A, year of last overhaul: 2020, sheet thickness aluminum (max.): 40 mm, air pressure: 60 bar, power: 6 kW (8.16 HP), product height (max.): 100 mm, product height (min.): 70 mm, product length (max.): 135 mm, product length (min.): 110 mm, SL80 Bradman Machine – Used & Fully Functional SL80 Bradman machine for sale. The machine is used but in good working condition and is fully functional. It has been well maintained and is ready for use. Gedpezx Ehzofx Aqgouh Selling due to no longer being required. Buyer is welcome to inspect the machine before purchase. Please get in touch for more information or additional photos.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Gjdpfezv Rhuox Aqgsuh Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Condition: good (used), Year of construction: 2007, Turning diameter 330 mm Turning length 508 mm Spindle speed 3,400 rpm Tool holder VDI 40 Distance between centers 610 mm Guedpfjz Stgqsx Aqgoh Turning diameter over the bed 585 mm Turning diameter over the cross slide 241 mm Travel - x 214.6 mm Travel - z 508 mm Bar diameter 63 mm Total power consumption 15 kW Machine weight approx. 4,100 kg Total power consumption 15 kW Dimensions 2800 x 1800 x 1800 mm Equipment: - Bar feeder 1.5 m Servo Bar 300 - 3-jaw chuck - Collet chuck - Tailstock - Various holders

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. Gjdpfx Aqszyc Rijgsuh The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 59 526 05 221 0010, functionality: fully functional, operating hours: 1,000 h, power: 20 kW (27.19 HP), input voltage: 380 V, input current: 33 A, type of input current: three-phase, temperature: 650 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,800 mm, total width: 1,600 mm, total height: 1,900 mm, overall weight: 350 kg, number of chambers: 1, control type: manual, actuation type: electric, fuel type: electric, Equipment: CE marking, Hardening furnace Vötsch VAW 60/100, in good condition. For sale due to business closure. Gsdpfxoz Rnwhj Aqgjuh Very reliable furnace; the temperature difference in the combustion chamber at 500°C is +/- 15°C. The furnace was operated at a maximum temperature of 500°C during production. The door seal is in good condition. The new price was EUR 38,000.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak Gusdpfx Aqsz R T Aksgsh • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2017, operating hours: 15,186 h, Equipment: documentation/manual, We are offering this used INDEX ABC 65 SL CNC lathe, manufactured in 2017. Machine type: ABC Year of manufacture: 2017 Operating hours (hydraulics): 15,186 Turret 1 with 7 stations, VDI 25, and W-gearing Synchronous spindle with chuck or collet possible! Turret 2 with 6 stations and dovetail mounting Powered tools on turret 2 Ejection blowing device Transmit function – Teleservice Gedpfx Aqjz Ri Ibogeuh Three rear boring spindles for fixed tools Magazine above the main spindle Conveyor belt Chip conveyor, hinged belt – workpiece removal device – workpiece feed unit INDEX LMI bar feeder magazines If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2024, condition: new, functionality: fully functional, TECHNICAL DATA • Designed for technical moulding applications (sprues and runners). • Slow rotor speed (25 RPM). • Four standard models. • High intensity magnetic trap, integral to the feed hopper, to ensure no metal parts reach the cutting chamber. • Quick opening and easy cleaning. • Anti-stress shaft rotation transmission. Guedpoz Sqd Hsfx Aqgeh • Double-bearing shaft configuration. The quietest of all The SL granulators are equipped with sound insulated feeding hoppers. The noise produced by the grinding process is fully dissipated, so to obtain noise levels well below those industrially acceptable (EN12012-1). All hoppers are equipped with sight glass for visual inspection of the grinding operations. Ease of maintenance and accessibility The entire SL unit can be accessed, cleaned and put back into operation in a matter of minutes. All parts are accessible with no need for tools and can be cleaned by vacuum. Also, all SL models are designed to be accessible from one side and do not require to be moved away from the injection moulding machine to perform maintenance or cleaning. Equipment developed for Industry 4.0 CMG provides technologies and solutions designed for the recycling industry, all certified for Industry 4.0 compliance. CMG's solutions include granulators, shredders, integral conveyor belts, regrind evacuation and conveying systems, dedusting, dust management and air filtration. CMG's installed base is considerable: over 45,000 units supplied to its customers in the company's 46 years of activity.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 200.170, functionality: fully functional, operating hours: 1,000 h, power: 18.75 kW (25.49 HP), input voltage: 400 V, input current: 27 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension length: 750 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,500 mm, total width: 1,400 mm, total height: 1,500 mm, overall weight: 400 kg, number of chambers: 1, number of shelf rows: 1, control type: manual, actuation type: electric, Equipment: CE marking, For sale: ThermConcept recirculating oven due to business closure. Very even temperature distribution in the combustion chamber. Manual control with timer. Gujdez Rn Hcepfx Aqgoh The oven was operated in production at a maximum of 500°C and is in perfect working order. The door seal is in good condition.

Condition: new, Year of construction: 2025, Model SLP-30/O Worksize dimensions 1200 width x 1800 height x 3000 depth Overall dimensions 1560 width x 2410 height x 3300 depth Power supply Electric Nominal power 27kW Voltage 380V Frequency 50-60Hz Door type: one sided Anti-Ex Schloss Homogeneity < ± 3.0°C if 180°C Temperature stability < ± 3.0°C Temperature max. 230° C Transport Ground (Rail in the floor) Heaters Exchangeable roof heating panels Circulation Vertical Ventilator Radial assembled on exchangeable panel Air flow Variable through holes on the walls Ventilation performance 1500m3/h Gjdpfxebuyrne Aqgeuh Motor power 1,5kW Capacity 6480L Warranty 12 months

Condition: used, Year of construction: 1990, operating hours: 2,946 h, power: 115 kW (156.36 HP), Equipment: air conditioning, cabin, INTERNAL VEHICLE NUMBER: M662 ----CLAAS DOMINATOR 88 SL ----HOURS: 2,946 ----YEAR OF MANUFACTURE: 1990 ENGINE: MERCEDES OM 366A 6-CYLINDER INLINE ENGINE (4-STROKE) WATER-COOLED MAXIMUM SPEED: APPROX. 25 KM/H CUTTING UNIT: 3.90 METERS RAPS TABLE THRESHING DRUM WIDTH: 1300 MM THRESHING DRUM DIAMETER: 450 MM INFINITELY VARIABLE ADJUSTABLE WIND FAN FOR CLEANING FUEL TANK PIPE: HYDRAULICALLY SWIVELING TIRES NEW NUMBER OF SHAKERS: 5 SHAKERS HYDRAULIC DRIVE GRAIN TANK CAPACITY: 4600 L STRAW SPREADER TRANSPORT LENGTH: 10 METERS Gsdpfsz Sdvwsx Aqgjuh TRANSPORT HEIGHT: 3.85 METERS UNLADEN WEIGHT: APPROX. 8500 KG HEATER AIR CONDITIONING (COMPRESSOR MISSING) 3D HEADER LEVELING HYDROSTATIC WITHOUT CUTTING UNIT WAGON THE DRIVE FROM THE HEADER HAS BEEN COMPLETELY OVERHAULED NEW BASKET NEW BELT NEW BLADE Contact us directly via WhatsApp at: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when purchasing a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer customized financing options tailored to your needs: with or without a down payment. * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will support you from the initial consultation to the vehicle handover. 4. Our additional services: In addition to vehicle purchase, we offer exclusive services for a smooth process: Worldwide vehicle sales: Support with purchase and export, wherever you are. Transfer license plates: Provision of export or short-term license plates for transport. Customs clearance: We take care of all formalities for export abroad. Delivery of your vehicle: Safe and punctual delivery directly to you. Important: All offers are subject to availability. The vehicle description serves as a guide; only the information in the purchase contract or order confirmation is legally binding. For vehicles with VAT, a net sale for export is generally possible if all required documents are available. Net sales within the EU are now only conducted with VAT deposit and proof of registration in the destination country (Confirmation of Arrival), provided that all necessary documents are present. For our export customers, we offer the following services: Export license plates for up to 30 days * Short-term license plates (5 days) * Preparation of the export declaration Contact us directly via WhatsApp at: Staff on site during opening hours. Please call in advance to make a reservation. We look forward to your call Your team from Autohaus MAT in Waibstadt

Condition: used, Year of construction: 2023, control SIEMENS Sinumerik 828D turning diameter 360 mm Guodpez Nqbmsfx Aqgeh turning length 520 mm spindle tunring speed 4.500 U/min number of tool places 12(24) Pos. weight approx. ca. 4.000 kg Condition: Used Technical features & accessories: - SARA UC1SD filtration system - SUN KOREA SL2000 chip conveyor Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: good (used), Revent Single Rack Oven Godpfx Ajyw T D Dsqgsuh Rotary Rack Oven Complete with one mobile oven rack In good working condition

Year of construction: 2001, condition: used, Temperature range 140 °C heating capacity 6,6 kW Cooling capacity 18 kW weight of the machine ca. 72 kg HB-THERM HB-W 140 – Temperature Control Unit for Plastics Processing — ideal Gujdszhn Tfepfx Aqgeh for injection molding and plastics processing facilities. Product description: The HB-W 140 temperature control units from HB-THERM (Grossenbacher Apparatebau AG, Switzerland) are proven peripheral devices for the precise temperature control of tools and machines. They are robust, reliable, and can be used with both water and oil. General Specifications - Manufacturer: HB-THERM (Grossenbacher Apparatebau AG), Switzerland - Model: HB-W 140 - Years of manufacture: 2001 Performance & Temperature Range - Heating capacity: 6.6 kW - Cooling capacity: 18 kW - Max. temperature: 140 °C Fluid - Suitable for: Water and oil - Application: Temperature control of injection molds and industrial tools Electrical specifications - Operating voltage: 380 – 420 V / 50 Hz - Connected load: approx. 7.2 kW - Rated current: approx. 11 A Pump & Pressure - Pump power: 0.55 kW - Flow rate: approx. 40 l/min - Head: approx. 60 m - Max. system pressure: 12 bar Machine Type - Industrial temperature control unit - Peripheral device for injection molding and plastics processing

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Gjdpfxowpunbs Aqgouh Manufacturer - Riggs Autopack Ltd. Model - 1000 Series 3. Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter.

Condition: defective spare-parts repository (used), functionality: limited functionality, With this offer, you are purchasing a used A2 DTF printer ‘DTF Speedline Model Y402’. Item for sale: 1 x DTF Speedline Y402 with the following equipment: Includes oven Device does not function, print heads need to be replaced Gsdpfx Aqsx Ehggogeuh Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has not been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Year of construction: 2020, condition: new, Transport systems Godpfx Aqjfz Dt Nogouh Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.