Used Rovema Vpr 250 for sale (12,331)

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Pgedsz S T Injpfx Ai Tju Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: new, Electric chain hoist CPV, load capacity 250 kg, main lift speed 8 m/min, FEM group 1, with mounting bracket * with mounting bracket * load capacity 250 to 2000 kg * robust design for a wide range of applications * operating voltage 400/50/3 V/Hz/phases * 42 V contactor control * integrated limit switch for the highest and lowest hook position * motor protected against dust and water ingress according to protection class IP 55 as per VDE 0530 * encapsulated control switch in IP 65, with emergency stop button * safety slip clutch adjustable from the outside * electromagnetic spring-loaded brake securely holds the load even in the event of a power failure * chain guide made of low-friction, and therefore low-wear, glass-fiber reinforced polyamide * lifting height 3.0 m, FEM classification (full-load operating hours): FEM 1Am = 800 hours. Other load capacities and lifting heights available upon request. * further technical features, FEM group: 1 Am Pjdpfx Aie Ab I Ruo Tsgu * lifting height: 3.0 m * voltage: 400/50/3 V/Hz/phases * main lift speed: 8 m/min * requires testing: yes Number of load strands: 1 Load capacity: 250 kg FEM group: 0.041666667 Main lift speed: 8 m/min Model: CPV 2-8 Voltage: 400/50/3 V/Hz/phases Duty cycle: 50 % Lifting height: 3 m Protection class: IP 55/IP 65 Design: with mounting bracket

Condition: good (used), Manufacturer: DEMAG Year of manufacture: 1995 Machine number: 878-0140 Operating hours: h Type: Ergotech 250-1450 system Control system: NC4 Screw diameter: 60 mm Displacement: 763 cm³ Injection weight: 690 g Injection pressure: 1,905 bar Clamping unit: Clamping force: 250 t Holding force: 275 t Opening stroke: 675 mm Minimum/maximum tool mounting height: 330 / 710 mm Ejector stroke: 200 mm Ejector plate dimensions: 950 x 950 mm Tie bar spacing: 630 x 630 mm Plate distance: 1,385 mm Pjdpfxo Aaz Tas Ai Tegu Condition: good, ready for operation Equipment: 4 core pulls Handling: Robot System DR 322 Travel ranges x – y – z: 800 x 1,600 x 3,000 mm Heater connection: 27 kW Screw drive connection: 35 kW Weight: 13.5 t Dimensions: 6,400 x 1,900 x 2,300 mm

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t Pgedpo Afva Sjfx Ai Tou

Condition: excellent (used), Catalog number 7248 TECHNICAL DATA - max. workpiece height 160mm Pgodpfx Ais Af Iz Ij Tou - spindle working length 250mm - spindle diameter 40mm - max. tool diameter 220mm - worktable dimensions (length/width) 420x1010mm - motor 11kW - 2 pneumatic workpiece clamps - dust extraction port diameter 180mm - dimensions (length/width/height) 1500x1010x1560mm - weight 689kg ADVANTAGES – Made in Germany – Used milling machine, very good condition Net price: 31900 PLN Net price: 7419 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: used, Year of construction: 2020, Wirtgen Road Milling Machine WS 250 (Int. No. 20386) Wirtgen Milling Machine, Type WS 250 Road milling machine / Soil stabilization milling machine Year of construction 2020 Approx. 700 operating hours 2.5m maximum working width 0-500mm working depth 1,080mm cutting circle diameter Recommended for tractors from 340 hp / 300 hp minimum requirement 381 hp maximum power to the PTO shaft Hydr. height-adjustable splash guard - stone guard and for reduced dust generation Mechanical belt drive Milling and mixing rotor FB2500 HT22 PLUS LA40 D22 106 round shank chisels Hydraulically height-adjustable side shields with milling depth stop ISO - Bus Stabilizer for mounting on tractors with rear three-point linkage for ISO 730-1 Cat 3 and Cat 4 Machine control and leveling via the rear linkage on the tractor Rear roller flap + splash guard adjustable hydraulically from the tractor Scraper blade on the roller flap (adjustable via spring preload) Mechanical drive via tractor PTO shaft, bevel gear, two-sided belt drive with four-rib power band on each side Automatic belt tensioner and spur gear Profile roller with 20-tooth external gearing Attachment device for mounting the stabilizer on tractors Application areas: Soil improvement - Creation of soil suitable for use for embankments, slopes, backfill or construction site access roads Soil stabilization - Creation of load-bearing soils for the construction of parking lots, roads, sports fields, track beds, port facilities, airports, industrial areas and much more Pjdpfxe Af Sg Us Ai Tsgu Also suitable for heavy soils! Financing from 2% possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is the possibility of taking other machines in part exchange.

Condition: new, Motor WEG W22 55 kW 04 250S/M 400/690//460 C/W 6 cabl. Steel. Pgsdpfx Aij Afdvno Teu

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Podpfsy Rnr Ajx Ai Togu Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: new, Electric chain hoist CPVF, lifting capacity 250 kg, main lifting speed 8 m/min, FEM Group 1, with wheeled trolley · 250 to 2000 kg lifting capacity with wheeled trolley · with 2 lifting speeds · robust design for a wide range of applications · standard operating voltage: European standard 400/50/3 V/Hz/Ph · 42 V contactor control · Motor with protection class IP 55, encapsulated control switch with protection class IP 65, with additional emergency stop protection · Integrated limit switch for the highest and lowest hook positions · Motors protected against the ingress of dust and spray water according to protection class IP 55 as per VDE 0530 · Thermal overload protection, externally adjustable safety slip clutch · Electromagnetic spring-applied brake securely holds the load even in the event of a power failure · Chain guide made of low-friction, wear-resistant glass fiber reinforced polyamide · Lifting height 3.0 m · Suitable for flange width 58-180 mm. FEM classification (full-load service life hours): FEM 1Am = 800 hours. Other lifting capacities and lifting heights available upon request. · Other technical features: Fine lifting speed: 2 m/min · FEM Group: 1 Am · Lifting height: 3 m · Voltage: 400/50/3 V/Hz/Ph · Main lifting speed: 8 m/min · Subject to mandatory testing: yes Model: CPVF 2-8 Fine lifting speed: 2 m/min Lifting height: 3 m FEM Group: 0.041666667 Pedpfx Aie Ab Nawo Tsgu Number of load strands: 1 Design: with wheeled trolley Duty cycle ED: 33/17 % Voltage: 400/50/3 V/Hz/Ph Main lifting speed: 8 m/min Protection class: IP 55/IP 65 Lifting capacity: 250 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Control system: Moasic Control, Tool opening stroke: 850 mm, Screw diameter: 60 mm, Injection pressure: 2144 bar, Clamping force: 2500 kN, Maximum shot weight: 694 grams, Installed heating capacity: 22.7 kW, Hour meter: 5100 hours, Psdpfx Aezub Hrji Tsgu Machine weight: 18,000 kg.

Condition: new, Electric chain hoist, capacity 250 kg, main lift speed 8 m/min, FEM Group 2m, chassis · with electric motor · 2 lifting speeds Pgodpfo Aci N Isx Ai Tou · lifting height 3 m · integrated slip clutch · control cable length 2 m · chain container included · solid aluminum housing · low profile Fine lift: 1.5 m/min Lifting height: 3 m Flange width F: 58-310 mm Number of load strands: 1 Duty cycle ED: 50 % Overall height D: 378 mm Design: Electric motor Protection class: IP 55/IP 65 Load capacity: 250 kg Power: 0.07 kW Main lift: 8 m/min FEM Group: 2 m Lifting motor: 0.3 kW

Condition: new, Electric chain hoist CPV, capacity 250 kg, main lift 8 m/min, FEM Group 1, with mobile carriage · Robust design for a wide range of applications · Standard operating voltage: Euro voltage 400/50/3 V/Hz/Ph · 42 V contactor control · Motor in protection class IP 55, encapsulated control switch in protection class IP 65, with additional emergency stop protection · Integrated limit switch for the highest and lowest hook position · Motors protected against dust and water ingress according to protection class IP 55 in accordance with VDE 0530 · Safety slip clutch adjustable from the outside · Electromagnetic spring-loaded brake securely holds the load even in the event of a power failure · Chain guide made of low-friction, wear-resistant glass fiber reinforced polyamide · Lifting height 3 m · Suitable for flange widths of 58-180 mm. FEM classification (full load operating hours): FEM 1Am = 800 hours. Other load capacities, lifting heights and 2 lifting speeds available upon request. Pgsde Ab Nbuopfx Ai Tou · Other technical features: FEM Group: 1 Am · Lifting height: 3 m · Voltage: 400/50/3 V/Hz/Ph · Main lift: 8 m/min · Requires testing: yes FEM Group: 0.041666667 Number of load strands: 1 Load capacity: 250 kg Protection class: IP 55/IP 65 Design: with electric carriage Voltage: 400/50/3 V/Hz/Ph Model: CPV 2-8 Duty cycle ED: 50% Main lift: 8 m/min Lifting height: 3 m

Condition: new, Electric chain hoist CPVF, lifting capacity 250 kg, main lifting speed 8 m/min, FEM Group 1, with mounting bracket · With mounting bracket · With 2 lifting speeds · Lifting capacity 250 to 2000 kg · Robust design for a variety of applications · Operating voltage 400/50/3 V/Hz/Ph · 42 V contactor control · Integrated limit switch for the highest and lowest hook position · Motor protected against the ingress of dust and water jets according to protection class IP 55 in accordance with VDE 0530 · Thermal overload protection, externally adjustable safety slip clutch · Electromagnetic spring-loaded brake holds the load securely even in the event of a power failure · Chain guide made of low-friction, thus wear-resistant, glass fiber reinforced polyamide · Lifting height 3.0 m, FEM classification (full load service life hours): FEM 1Am = 800 hours. Other lifting capacities and lifting heights available upon request. · Other technical features: Fine lifting speed: 2 m/min · FEM Group: 1 Am · Lifting height: 3 m · Voltage: 400/50/3 V/Hz/Ph · Main lifting speed: 8 m/min · Subject to inspection: yes FEM Group: 0.041666667 Model: CPVF 2-8 Main lifting speed: 8 m/min Lifting capacity: 250 kg Protection class: IP 55/IP 65 Design: with mounting bracket Fine lifting speed: 2 m/min Duty cycle ED: 33/17 % Podpfx Aij Ab I Sre Tjgu Voltage: 400/50/3 V/Hz/Ph Lifting height: 3 m Number of load strands: 1

Condition: new, Electric chain hoist, capacity 250 kg, main lift speed 6 m/min, FEM Group 2m, manual trolley · with manual trolley · 2 lifting speeds · lifting height 3 m · integrated slip clutch · control cable length 2 m · chain container included · robust aluminum housing · low FEM Group: 2 m Flange width F: 50-305 mm Standard chain container up to lifting height: 4 m Protection class: IP 55/IP 65 Fine lift speed: 1.5 m/min Load capacity: 250 kg Pgedpfo Aci Nzox Ai Teu Design: manual trolley Overall height C: 406 mm Power: 0.07 kW Lifting motor: 0.3 kW Duty cycle ED: 50% Number of load chains: 1 Main lift speed: 6 m/min

Condition: used, Year of construction: 2026, FAE Stabilizing Mill STABI/H/HP 250, Lime and Soil Stabilizing Mill (Int. No. 15331) Year of manufacture: 2026 Lime and soil stabilizing mill Largest stabilizing mill on the market Working width: 2.50 m Overall width: 2.90 m Working depth: 16.5 cm to 56 cm Tractor power: 350 HP to 500 HP PTO: 1,000 rpm Weight: 7,500 kg Rotor diameter: 1.24 m Tool: F/3 Mobile rotor Hydraulic rear flap with floating position – spring system Replaceable wear plates made of Hardox® Closed machine housing Chamber with variable geometry Side protection covers Protection chains with bolted plates Poly-Chain belt drive Double-sided gear drive Oil cooler - kit for gear drive Gearbox with freewheel Gearbox with oil cooling (STABI / H / HP) Cardan shaft without clutch Side cardan shafts with friction clutch Bolted rotor stub shafts (made of forged steel) Height-adjustable skids Metering shield Ideal for preparing the construction of roads, highways, railway tracks, parking areas, sports fields, commercial areas and industrial plants Oil cooling system for gearbox Inner and side protection covers made of Hardox® (replaceable) Mobile rotor and geometrically variable mixing chamber Psdpfxe Af Sgme Ai Togu Options: Possibility to equip the rotor with various milling tools Spring-dampened metering flaps Water spray system WSS High Flow Automatic water spray system FCS Anti-clogging grid Financing possible from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to take care of financing options in Germany and abroad. There is the possibility of trading in other machines.

Condition: good (used), Year of construction: 2021, More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. - Since 1977 supplier of reliable used agricultural and horticultural equipment - Machines are checked for delivery - Experienced team - We can help you with getting the machine to your company Pgodsz Sh Svspfx Ai Teu Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: refurbished (used), Rovema VPS 260 Pgedpfxsx Ag R Es Ai Tsu

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 250 mm gear width 600 mm max. module 8 min. module 0,5 spindle turning speed - stepless 225 - 1800 U/min control Siemens 840 D milling head -swivable +/- 45 ° table diameter 170 mm table hole 100 mm clamping length max. 1310 mm Psdpfxs Afzy Rj Ai Togu total power requirement 55 kW weight of the machine ca. 11,2 t dimensions of the machine ca. 3,2 x 2,6 x 2,8 m

Condition: used, Year of construction: 2025, 1 used all-wheel drive tractor Manufacturer: John Deere Model: 6R250 Year of manufacture / First registration: 02/26/2025 Operating hours: 870 h Serial number: 1L06250RTSR508463 With PowerGard Protection Plus extended warranty until 02/2028 and/or up to 3000 operating hours Equipment: 1552 AutoPowr IVT transmission, continuously variable, 50 km/h (31 mph) 1758 AutoTrac preparation 183E JDLink modem 188T StarFire Universal receiver SF 7500 1916 CommandCenter G5 Plus with G5 additional display 1980 G5 Advanced 1-year license 2011 ComfortView cab 2161 Ultimate seat 2204 Hydraulic cab suspension 2523 Mirrors - electrically adjustable 2634 Door with B-pillar on the left and panoramic window 2670 Radio with 6.5-inch touchscreen 2709 CommandArm with CommandPro 3242 Hydraulic pump with 195 l/min 3351 Five electronic auxiliary control valves (E-SCV) 3400 No center block SCV 3831 Rear PTO - 540/540E/1000 4113 Lower link with pick-up hook - Category 3 4221 Hydraulic upper link 4430 Stabilizer bar, hydraulic 5010 Flange axle rear 5093 Steel rims with two positions 5291 Rear tires 710/70R42 5903 Rear and front tire combination 6070 Suspended all-wheel drive front axle - TLS Plus with brakes 6091 Steel rims with two positions (front) 6265 Front tires 600/70R28 8012 Front fenders for front-wheel drive, rotatable 8023 Fender extensions 8202 Compressed air connection 8225 Steering wheel with leather cover 8264 Cooler box 8273 Mud flap set 832C Fenders controls for rear linkage 832R Preparation for additional pressure connection 833H Hydraulic Intelligent Power Management 8381 Front PTO 840A 3-in-1 rail system - hitch Podpfxj Af Hwhj Ai Togu 841J Automatic hitch 841L Electric multi-function lever 8466 ISOBUS socket for front linkage 8474 Ultimate front linkage package 8609 Intelligent all-wheel drive 8701 Ultimate lighting package 8725 Rotating beacon 873O Work lights at medium cab height 8751 Compressed air trailer brake system 8767 Variable steering ratio 878C License plate holder - front 878N Overhang warning signs 8786 Two wheel chocks 98DI PTG - Central tire pressure system Ball hitch K80 automatic drawbar Mechanical upper link front hydraulics For further information, please contact your Zürn sales consultant. Offer subject to change, information without guarantee. The price applies to the current condition of the machine.

Condition: used, operating hours: 18,001 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, nominal power (apparent): 82 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece length (max.): 900 mm, workpiece width (max.): 900 mm, total height: 3,267 mm, total length: 4,523 mm, total width: 8,436 mm, rotational speed (min.): 12,000 rpm, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 80, Year of construction: 2004 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 2500 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Number of pallets: 1 Table dimensions mm: 3100 Maximum workpiece size (D x H) mm: 900 Spindle Podpoylw D Ajfx Ai Togu Spindle speed rpm: 12000 Spindle drive power kW: 35/25 (40/100%ED) Cooling Tank capacity: 600 Tool system Tool holder: HSK-A 100 Tool magazine slots: 80 Tool changer: Pick-up With free neighboring places mm: 160 With occupied neighboring places mm: 100 Max. Tool Length mm: 250 Max tool weight kg: 12 Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Machine running times Under power: 61685 Spindle Working: 18001 Rated power kVA: 82 Basic machine dimensions / weight Length mm: 4523 Width mm: 8436 Height mm: 3267 Weight kg: 26000

Condition: used, Year of construction: 2023, Electric multi-function lever Steering wheel with leather trim Cool box Mounting rail for display Sunroof Pneumatic trailer brake system with two lines Variable steering ratio Fender extensions - 2730 mm total coverage Front fenders for front-wheel drive - rotatable Ultimate lighting package Two rotating beacons Driving lights at medium height - H4 (left and right) Fender-mounted controls for dedicated electric auxiliary control unit (SCU) Ultimate front hitch package, 5 t Bracket for front hitch stabilizer chain Front PTO Preparation for auxiliary hydraulic system - rear with adjustable load sensing Hydraulic Intelligent Power Management Overhang warning signs AutoPowr™ IVT™, 50 km/h (31 mph) ComfortView™ cab CommandARM with CommandPRO Hydraulic cab suspension Premium seat Mirrors - electrically adjustable and electrically extendable with wide-angle view Radio with 6.5-inch touchscreen Door with B-pillar on the left and panoramic door on the right Flanged axle, rear All-wheel drive front axle - TLS Plus with brakes Hydraulic top link Stabilizer bar - automatic, dual pivot adjustment Rear PTO - 540E/1000/1000E - for flanged axle Hydraulic pump with 195 l/min Five electronic auxiliary control units (SCUs) - Premium No center SCU Psdpfx Ais Ad Dryj Togu AutoTrac™ preparation CommandCenter™ 4600, 4th generation Automation Activation 4.0 for CommandCenter™ 4600, 4th generation JDLink™ mode

Condition: used, Year of construction: 2023, AutoPowr, 50 km/h Suspended front axle TLS Plus with brakes AutoTrac preparation Premium Activation 3.0 for AutoTrac and Section Control No StarFire receiver CommandCenter 4600 Gen4 ComfortView cab Hydraulic cab suspension DAB+ radio with 6.5-inch screen and hands-free system Hydraulic pump, 195 l/min Compressed air connection Cooler box Steering wheel with leather cover Hydraulic Intelligent Powr Management Pgjdpfx Aie Ad Ek Ds Tsu Ultimate front linkage, 5t Ultimate lighting package Variable steering ratio Overhang warning shields

Condition: ready for operation (used), functionality: fully functional, For sale is a Rovema form-fill-seal machine for packaging coffee in weight ranges from 500 g to 1,000 g. The machine is fully operational and features an integrated aroma valve system for coffee pouches with freshness valve. Technical specifications: • Suitable for 500–1,000 g of coffee • Integrated valve system • Robust, durable construction Pgedpfx Aeynntmsi Tou • Ideal for ground coffee or whole beans • Comprehensive spare parts package included This machine is manufactured to high German quality standards – solid, reliable engineering (good traditional workmanship). Inspection or demonstration available by appointment.

Condition: excellent (used), Year of construction: 2010, Four-jaw chuck 27974 Diameter 250 mm 4 individually adjustable jaws Mounting: Long taper, diameter 80 mm with external thread 125 x 3 mm Keyway 10 mm Overall length with flange and jaws 193 mm Weight 29 kg Age is estimated. Pgodpfx Aefimg Hsi Tou

Condition: used, machine/vehicle number: A0984, working width: 2,500 mm, Year of manufacture: 2014 Empty weight: 1.555 kg Pedpfx Ae Agapgsi Tegu Please contact Afdeling Verkoop for more information