Used Saeilo Center Lathe for sale (18,465)

Condition: excellent (used), ROMI GL 240 2 Axis CNC Lathe Swing over Z axis cover mm 420 Maximum cutting diameter mm 300 Maximum cutting length mm 400 Travel (X axis) mm 188 Travel (Z axis) mm 400 Spindle nose ASA A2-5" Spindle hole diameter mm 58 Bar capacity (dia.) mm 51 Speed range rpm 6 to 6000 Rapid traverse (X & Z axis) m/min 30 Iedpfx Aszu Nggog Aetn Number of stations atc 12 AC spindle motor hp/kW 20/15

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Itedpfxexp Hudo Ag Asn

Condition: used, Year of construction: 1976, turning diameter over bed 600 mm turning diameter over slide rest 400 mm turning length 1000 mm Itodpfxsw Tdxce Ag Asn turning diameter in the gap 850 mm turning speeds 15 - 810 U/min centre height 300 mm spindle bore 56 mm total power requirement 9,0 KW weight of the machine ca. 2,9 t dimensions of the machine ca. 2,8 x 1,45 x 1,65 m Center lathe - Forkardt 3-jaw chuck F 315 - Single-jaw tool post - Steady rest - Live center - Chuck guard, limit switch monitored - Chip tray

Condition: used, Year of construction: 1955, Technical details: turning diameter over bed: 420 mm turning diameter over support: 240 mm Itodpfx Aeu Ix D Aog Aen turning length: 1100 mm turning dia. in gap: 600 mm range of revolution per miute: 24 - 900 / 8 step U/min spindle bore: 41 mm range of feed in x - axis: 0,0120 - 0,1000 mm/U range of feed in y - axis: 0,0062 - 0,0302 mm/U tailstock quill taper MT: 3 tailstock quill adjustment: 220 mm total power requirement: ca. 4,0 (ohne Gewähr) kW weight of the machine ca.: 1,2 t dimension machine xH: 2,3 x 0,9 x 1,3 m Equipment: 3-jaw chuck Ø 200mm Tool holder 4-way, swivelling 30° right/left T-slot for copying device Driving disc *

Condition: excellent (used), Year of construction: 1984, Maximum turning height 180 mm Distance between centers 1000 mm Swinging diameter over bed 350 mm Swinging diameter over cross slide 200 mm Bed width 255 mm Spindle bore 36.5 mm Spindle mounting, DIN 55027 Size 5 Speed range, 14 steps 28 – 2500 rpm Feeds, 9 longitudinal 0.04 – 0.4 mm/rev ditto, 9 facing 0.02 – 0.2 mm/rev 38 metric threads 0.2 – 18 mm 35 Whitworth threads 76 – 2“ 31 module threads 0.4 – 13.5 module 25 diametral pitch threads 36 – 2.6 pitch Tailstock mounting MK 4 Drive power 3 kW Machine dimensions L x W x H 2380 x 850 x 1800 mm Weight 1300 kg Itedoyud Itepfx Ag Aon Accessories / Special features: • 2-axis digital display EASSON ES-8A • Quick-change tool holder system “Multifix” Size B • Chuck guard, foldable, electrically secured • Coolant system Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 1999, Lathe STANKO IMPORT 1M63H-1.5, year of manufacture 1999 with 2-axis digital display Heidenhain, faceplate 610 mm, Multifix holder size C with 2 tool pockets, with upper slide feed. Turning diameter: 630 mm Turning length: 1500 mm Isdpfxjz St Uue Ag Aotn Spindle bore: 105 mm Spindle speeds: 10 to 1250 rpm Spindle nose: DIN 11 Weight, approx. 5,000 kg. Coolant system, machine lamp. Machine documentation available. Good condition, ready for use. Further data can be found in the data sheets.

Condition: used, Year of construction: 1952, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 520 mm turning length: 2500 mm support travel z-axis: plan: ca. 500 mm support travel z-axis: Obersupport: ca. 300 mm centre height: 300 mm spindle passage: 90 mm range of revolution per miute: 3,2 - 382 / 22 step U/min range of feed in x - axis: längs: 0,213 - 2,67 / 36 step m/min range of feed in y - axis: quer: 0,070 - 1,11 / 36 step m/min tailstock quill taper MT: 6 total power requirement: 22 weight of the machine ca.: 8,2 t dimension machine approx.LxWxH: 5,3 x 1.,6 x 1,6 m Itodpou Tq U Isfx Ag Asn transport measurements machine: ca. 5,5 x 1,7 x 1,6 m Equipment: Faceplate Ø 1000mm 4-fold turning tool holder Lynette Ø 250 closed Accesorios four-jaw chuck Ø 630 i.D. *

Condition: excellent (used), For sale: a professional, extremely rigid, and precise Colchester Triumph 2500 universal lathe, manufactured in the UK (600 Group). The machine is in the most sought-after, long version: 15x60, with a center distance of 1250 mm. The lathe has just undergone a technical inspection and is 100% mechanically and electrically sound – ready for immediate implementation in production or toolmaking without any financial investment. All mechanical feeds, threading, and spindle gearings operate very quietly, smoothly, and precisely. The machine bed and guides are in excellent condition, with no scratches or wear (visible in the photos). The machine has been extensively upgraded with new, top-of-the-line equipment, guaranteeing the highest turning precision. Technical specifications: • Manufacturer: Colchester Lathe Co., Ltd. (United Kingdom) • Model: Triumph 2500 • Center distance: 1250 mm • Swing over bed: 400 mm • Spindle bore: 54 mm • Spindle nose: Camlock D1-6 • Spindle speed range: 14 – 2500 rpm (rich gearbox) • Main motor power: 7.5 kW (10 HP) • Machine weight: approx. 1650 kg (solid, heavy casting that dampens vibrations) Itsdpez Srwhefx Ag Aen Extensive equipment included in the price: 1. NEW BISON-BIAL 250 mm chuck: Factory-new, precise chuck from a renowned Polish manufacturer. Guarantees perfect axial runout and powerful clamping force. 2. Digital Readout (DRO) 3. Quick tool change system (Multifix): Robust quick-change tool holder with a set of 6 toolholders (4 brand new + 2 older ones). Logistics: • The machine is connected in the workshop – you are welcome to inspect the condition and perform turning tests on-site. • LOADING INCLUDED IN THE MACHINE PRICE – I have a heavy forklift on-site and can ensure fully safe and efficient loading of the machine onto your transport. Price: 11500 net (negotiable). VAT invoice provided.

Condition: good (used), Year of construction: 1986, turning diameter: 1,320 mm, turning length: 5,000 mm, Swing diameter: 1,320 mm Turning length: 5,000 mm Faceplate diameter: 1,250 mm Workpiece weight: 14 t Iedpfxjz Rnv Re Ag Aetn Swing diameter over support: 900 - 950 mm Total power requirement: 45 kW Machine weight approx.: 18 t

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 660 mm, turning diameter over bed slide: 900 mm, turning length: 2,000 mm, spindle speed (max.): 710 rpm, overall weight: 7,000 kg, Poreba TPK 90A1/2M Chuck 800 mm Itjdpewbd Dvsfx Ag Aen 2000mm between Centres Swing over bed 900 mm Swing over saddle 660 mm Spindle Speed 710 rpm Weight 7000 kg approx.

Condition: like new (used), Weiler Voest DA210, an original fixed and adjustable sun visor, in very good condition. Iedpfxez N Smwj Ag Aotn

Condition: good (used), Year of construction: 1975, Offer 24204 Technical data: - Maximum swing diameter over bed: 420 mm - Centre distance: 1000 mm - Spindle bore: mm - Tailstock quill taper: MT 4 - Tailstock quill travel: 200 mm - Spindle speeds: 40 - 2000 rpm - Longitudinal & facing feeds - Metric thread pitches Itedpfx Aox Tqg Ijg Asn - Imperial threads - Module threads - Drive: 400 V - Includes: 3-jaw chuck - SWS steel toolholder with 3 inserts - Space required: approx. W 2800 x H 1250 x D 950 mm - Weight: approx. 2200 kg

Condition: like new (used), functionality: fully functional, Weiler Primus Lead and Pull Spindle Bench Lathe – Like New Condition!!! Technical Data: >> Year of manufacture approx. 1990, machine no. 4472 >> Center height 120 mm >> Distance between centers 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, like new, with 2 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increasing in 1 mm increments >> Mulifix size A with 3 steel holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Operating manual, electrical diagrams, and much more About the machine: A Weiler Primus Lead and Pull Spindle Bench Lathe with a workbench is offered in like-new condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus model comes from the German Armed Forces, where it was used very little (almost new). This newer generation of Weiler lathes is very user-friendly and can produce surfaces that are as smooth as if they were ground. Take advantage of the opportunity to inspect this machine on-site and under power to convince yourself of its condition. Itedpfx Aoz A Tgqeg Asn Digital display available for an extra charge.

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Ijdpfx Aoy Nfqmjg Aotn Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 tailstock quill: 180 mm weight of the machine ca.: 1,6 t dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling Iodpfsu Ix Hdox Ag Astn 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: used, functionality: fully functional, POREBA Lathe Type: TPK 90A1 Diameter: 930 mm Distance between centers: 5000 mm Diameter over carriage: 630 mm Diameter over cross slide: 1200 mm Spindle bore: 95 mm Speeds: 7.1 - 710 mm Tailstock Steady rest 4-jaw chuck: 800 mm 3-jaw chuck Itodpfx Aoz Rl Epog Ajn MACHINE SOLD AS IS

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09/004, turning diameter over cross slide: 225 mm, spindle bore: 62 mm, turning diameter over bed slide: 400 mm, turning length: 1,000 mm, total length: 2,100 mm, total width: 1,080 mm, total height: 1,520 mm, overall weight: 1,800 kg, This machine is in technically perfect and well-maintained condition and can still be inspected while powered on. It features continuously variable speed control. Isdpfxjz Imc Ae Ag Aotn

Condition: good (used), Year of construction: 1991, functionality: fully functional, Weiler Praktikant 160 B, Year of manufacture: 1991, 3-axis digital display, Maximum turning diameter: 160 mm, Distance between centers: 650 mm, Spindle speed up to 2,500 rpm, Itedpfxezg Hvve Ag Asn Tailstock, Collet set, Chuck, 2 tool holders.

Condition: used, functionality: fully functional, type of input current: three-phase, overall weight: 2,500 kg, We are offering this used Matra MD 25 lead screw/draw spindle lathe, year of manufacture unknown. Safety guard retrofitted. Itjdszi Uzfjpfx Ag Asn Type: MD 25 Serial number: 3095 Power type: DS Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Rated current: 17 A Fuse rated current: 35 A Wiring diagram no.: 112599100000 If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), With DRO With step-down gear for spindle speeds Center height150 mm Distance between centers 630 mm Turning diameter over bed 340 mm Spindlespeeds 55-3000 rpm Spindle bore 40 mm Pitch of leading screw 4 mm Tail stock MK5 Misc.accessories Iedjy Iz Ixjpfx Ag Aetn MARCELS MASCHINEN CH

Condition: excellent (used), functionality: fully functional, Weiler center lathe, model Condor 81, with a leading and following center, and a 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture 1982, machine number 82 017 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5, with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approximately 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching the counting direction >> 1 three-jaw chuck, 160 mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back wall Iedpjz D Hx Nofx Ag Aetn >> Coolant system >> Machine feet At an extra cost: New collet chuck and new collets from 3 to 26 mm, in 1 mm increments. About the machine: A used Weiler Condor 81 in very good condition is offered. It comes from a training center and has been well maintained. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on site while it is powered up.

Condition: like new (used), Year of construction: 2001, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 50 mm, turning diameter over bed slide: 350 mm, turning length: 700 mm, total length: 1,650 mm, total width: 1,050 mm, total height: 1,650 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Accessories: - 3-jaw chuck with internal and external jaws - 3-axis digital readout - electrical diagram - multifix tool holder with 3 holders - coolant system - machine lighting Itodpfswy Hvxsx Ag Aon - live center - bed stop - machine feet

Condition: used, Year of construction: 1986, Technical details: Isdpfx Agsvgmlno Aotn turning diameter over bed: 1000 mm turning diameter over slide rest: 745 mm turning length: 3000 mm turning speed range: 4,5 - 900 U/min spindle bore: 110 mm max. workpiece weight between centres: 12500 kg total power requirement: 30 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,2 x 2,3 x 2 m 3-axes digital readout rapid feed, feed at upper support 350 mm 1 fixed steady face plate diameter 1000 mm coolant attachment *

Condition: good (used), 1 x lathe from Hamburg 430 --- 1 x lathe from WEIPERT 425 --- 1 x lathe from VDF Iedpjz Smtlofx Ag Aotn

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel Itjdpfozd Tycox Ag Asn >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.