Used Samson Controller Station for sale (49,499)

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations Nedpfxez Agw Es Agrelg - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Njdpez Ag Rrofx Agrelg - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Swinging diameter over bed: 750 mm Swinging diameter over cross slide: 700 mm Nledpfx Agsz Apc Rsrjg Distance between centers: 3,000 mm Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Tailstock diameter: 130 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Machine weight: approx. 28,000 kg

Condition: used, Year of construction: 2011, Automatic labeling machine for glass bottles Manufacturer/Model: Makro MAK-1 4P Ua2 L2 Version with 2 self-adhesive labeling units MAK-A50 Suitable for front label and back label Output: up to approx. 3,000–3,500 bottles/hour Container diameter: 40–130 mm, container height: 140–380 mm Label length: 10–195 mm, label height: 10–180 mm Stainless steel version AISI 304, safety enclosure in accordance with CE PLC control with touch-screen display Automatic speed regulation and electric head height adjustment Optical orientation via sensors, plate rotation via stepper motors Installed power: approx. 4 kW Technical data: working direction: left-right, clockwise capacity bph max.: 4500 Nlsdpfx Aoz Abkaegrog labels: self adhesive labels number of labelling stations: 2 number of bottle plates: 4 orientation: bottle plate with stepper motor, optical orientation using a photocell bottle diamater max (mm): 130 bottle diamater min (mm): 40 bottle height max (mm): 380 bottle height min (mm): 140 motor height adjustment: yes speed adjusment: frequence converter

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, overall weight: 5,800 kg, number of spindles: 6, For sale is a professional, four-sided planing machine, CHAMBON TSN 6, manufactured in 2021, in an extended 6-spindle configuration. The machine is designed for efficient and precise wood processing, including four-sided planing and the creation of more complex profiles. This is not a basic TSN 6 model. The offered unit features 6 spindles, including a universal spindle, Siemens numerical control, driven axes for selected spindles, a Pro-Lock system, and an automatic magazine/feeder for workpieces. 6-spindle configuration: Bottom – 5.5 kW – Ø40 mm, length 255 mm, 6000 rpm. Right – 5.5 kW – Ø40 mm, length 170 mm, axial movement 60 mm, profiling up to 20 mm. Left – 7.5 kW – Ø40 mm, length 170 mm, axial movement 60 mm. Top – 11 kW – driven angular movement controlled numerically. Bottom – 7.5 kW – readout of axial and angular settings. Universal – 11 kW – programmable angular movement and readout of axial and angular settings. The machine has a 2-axis Siemens Basic control system with a 7-inch touchscreen, program memory, and a graphical interface for easy machine setup. An additional front display shows the current positions and diameters of the tools for the selected program. Construction and feed The CHAMBON TSN 6 has a heavy-duty, reinforced frame to reduce vibrations and chrome-plated work tables. An industrial, chainless feed system is used – the rollers are driven by their own gearboxes from a synchronized cardan shaft. The feed speed is continuously adjustable in the range of 6–24 m/min. The machine has pneumatic clamps, two rollers in front of the first bottom spindle, a system of side clamps, and a central lubrication station. The infeed table is 2000 mm long, and the configuration also includes a loading table of 2500 mm. Nledpfxjz Ef Swo Agrsg Key parameters Manufacturer: CHAMBON Model: TSN 6 Year of manufacture: 2021 Number of spindles: 6 Working range: 15–230 mm width / 10–150 mm height Spindle diameter: 40 mm Speed: 6000 rpm Feed: 6–24 m/min Control: Siemens Basic, 2 axes, 7" screen Rated machine power: 74.8 kW Tooling system: Pro-Lock Power supply: 400 V / 50 Hz / 3 phases / PE Weight: 5680 kg Protection class: IP54 Lighting: LED Compliance: CE The machine is an extended production configuration, combining four-sided planing, profiling, CNC control, and automatic material feeding. It is primarily intended for intensive serial production. The price of a new machine according to the original offer from 2021: 118,350 EUR net.

Condition: good (used), operating hours: 20,080 h, functionality: fully functional, machine/vehicle number: Kf262 622 E35, overall weight: 720 kg, load capacity: 12 kg, arm reach: 2,665 mm, pivoting range: 300 °, Equipment: documentation/manual, Complete automated glazing and handling solution For sale is an automated robot glazing cell with a Kawasaki 6-axis glazing robot, a Yaskawa handling robot, a CeramDetect 3.0 workpiece recognition system, a base cleaning machine, and a feeding and transport system. System overview: - Complete automated robot glazing cell for ceramic sanitaryware - Automated material flow from the feed conveyor, via workpiece recognition and carousel, to the glazing, base processing, and transfer to the transport system - Designed for different sanitaryware models - Sold as a complete process solution with robotics, recognition, and handling Glazing robot: - Manufacturer: Kawasaki Robotics. Type: KF262, 6-axis industrial robot, used for automated glazing/coating of sanitaryware Handling/transfer robot: - Manufacturer: Yaskawa Europe GmbH - Series: Motoman ES165D - Robot type: YR-ES0165D-B00 - Controller: Yaskawa DX100 - Date according to nameplate: 03.10.2013 - Power supply: 3-phase, 400 / 415 / 440 V, 50 / 60 Hz - Average power: 5.0 kVA - Full load current: 14.4 A - CE marking present - Function: automated transfer between carousel, base cleaning station, and transport system Workpiece recognition – CeramDetect 3.0: - CeramDetect 3.0 for automatic workpiece and position recognition - CeramDetect laser module and camera - Recognition in the area of the transfer from the feed conveyor to the carousel - The existing CeramDetect software is offered together with the system Base cleaning machine: - Automated base cleaning machine as part of the robot cell - Transfer and removal are carried out by the Yaskawa handling robot Other system components: - Feed conveyor for workpiece feeding - Automated transfer device from the feed conveyor to the carousel - Carousel for positioning and transferring the workpieces - Transport system for receiving the finished workpieces - Protective and safety devices - Control and electrical components of the entire system Material flow: 1. Feeding of the sanitaryware via a feed conveyor 2. Removal of the workpieces from the feed conveyor via an automatic transfer device 3. Transfer of the workpieces to the carousel 4. Workpiece recognition takes place at the transfer position using CeramDetect 5. Type and position of the workpiece are recorded for the automated glazing process 6. Transport of the workpiece on the carousel to the glazing position 7. Automatic glazing by the Kawasaki 6-axis glazing robot 8. Transfer of the workpieces by the Yaskawa handling robot to the base cleaning station 9. Transfer to the base cleaning station and subsequent removal 10. Placing the workpieces on a transport system Special advantages: - Automatic workpiece recognition and position determination - Flexible processing of different sanitaryware models - Combination of glazing robotics, automated handling, and base cleaning - Complete process cell instead of individual robot components Nledpfozz Ra Uox Agrjg Scope of supply and notes: - The sale includes the existing components of the described robot glazing cell - Technical documentation, circuit diagrams, robot programs, and existing software versions will be provided with the system, subject to availability - Dismantling, loading, and transport need to be coordinated Further technical details can be provided.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: CC41011401EJ, working width: 2,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 70 mm, Investronica CV040/070 automatic multi-ply cutting system, built February 2003 in Madrid. In working order. TECHNICAL DATA Manufacturer: Investronica Sistemas, Madrid (Spain) Model: CV040/070 Identification: LOOCC4.100V000.B0 Serial number: CC41011401EJ Date of manufacture: February 2003 Useful cutting width: 2,000 mm Cutting height: 70 mm compressed fabric Cutting window: 2,200 mm, continuous length with conveyor belt Vacuum system: high-efficiency vacuum generation, integrated module Feed: automatic advance system Sharpening: automatic blade sharpener on the cutting head Blade speed: variable control Table: evacuation table with conveyor belt Approximate weight: 3,000 - 4,000 kg, to be confirmed on dismantling EQUIPMENT INCLUDED 1. Investronica CV040/070 automatic cutting table with cutting head, blade sharpener, integrated vacuum module and evacuation table with conveyor belt. 2. Control station built into the machine, with monitor, keyboard and computer. 3. Investronica P2000 pattern plotter. Nledpfx Agez Atvujrjg The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, total height: 2,000 mm, total length: 2,600 mm, total width: 1,800 mm, overall weight: 4,700 kg, TONGTAI TOPPER TNL - 100 / CNC lathe / Fanuc OT control -CE marking -Fanuc OT control -TOOL EYE - tool measurement system -Max. turning diameter 390mm -Max. turning length 580mm -Bar capacity 51mm -Axis travels X / Z 200 & 600mm -Rapid traverse rate X / Z axis 20 & 24 m/min -Spindle bore diameter 62mm -Spindle speed range 45 - 4500 rpm -Turret 12 stations -Tool shank 25mm -Tool holder diameter 32mm -Spindle motor 15 KW -Tailstock Nledpfx Aozyz U Tegrsg -Foot switch -Machine feet -Chip conveyor -Complete documentation Dimensions L x W x H 2.6 x 1.8 x 2 meters / Weight 4700 Kg Errors and omissions excepted.

Condition: like new (used), A complete set including the C9900-K652 cable + CP Link 4 model CU8803-0000. We have 4 sets available. Price is for 1 set. The BECKHOFF CP3921-0010 is a professional operator panel equipped with a 21.5-inch Full HD screen and Multi-Touch technology, designed for use in industrial automation, machine control systems, and modern production environments. The device works with CP-Link 4 technology, enabling the transmission of images, data, and power through a single cable. The Beckhoff CU8803-0000 is an industrial transmission module (Transmitter) of the CP-Link 4 system, designed for remote connection of Beckhoff operator panels to industrial computers and automation controllers. The device enables the transmission of images, USB signals, and control communication through a single Ethernet cable, allowing the operator panel to be installed at a considerable distance from the control unit. This solution is widely used in industrial machines, production lines, and automation stations requiring separation of the industrial computer from the HMI panel. Beckhoff C9900-K652 – RJ45 CAT 6A connection cable, 5 m, is an industrial communication cable designed to connect Beckhoff operator panels with the CP-Link 4 interface. The cable ensures reliable transmission of data, images, and control signals between the industrial computer and the operator panel in demanding industrial conditions. The cable is equipped with a standard RJ45 connector and an industrial IP65 connector designed for Beckhoff CP39XX series panels. Thanks to its shielded CAT 6A construction, it guarantees high resistance to electromagnetic interference and stable data transmission. Nledpszkaqzofx Agreg The panel was designed for continuous operation in demanding industrial environments, providing high-quality images, intuitive multi-touch operation, and easy integration with control and process visualization systems. Specifications Manufacturer: BECKHOFF Model: CP3921-0010 Type: Industrial HMI operator panel Screen diagonal: 21.5″ Resolution: 1920 × 1080 (Full HD) Touch technology: Multi-Finger Touch Screen Interface: CP-Link 4 Function: Display Only Application: Industrial automation, process visualization, machine control Key features High-quality Full HD screen, Multi-touch support, CP-Link 4 technology – transmission of images, data, and power via a single cable, Industrial design adapted for continuous operation, Easy integration with control and visualization systems, Modern operator panel for production and laboratory environments. Applications Industrial automation, HMI operator stations, Machine control systems, Production lines, Process monitoring systems, Research and development laboratories, Industrial applications operating in 24/7 mode. The device comes from equipment used in research and development activities related to industrial automation, measurement systems, and technology projects. The technical and visual condition is consistent with the product photos. The product is covered by a start-up warranty.

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: 8 axes - CNC - machining station A2 - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. 2x screw unit for locking component inserter - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Stacking and sorting unit, 3 axes Nlsdpfx Aezm Hr Rsgrjg - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Screws 4x/part 6-8 x standard locking component insertion for window 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. Njdpfozz Rpcox Agrjlg - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2019, condition: refurbished (used), functionality: fully functional, This is a CMP 61 combination steamer from the premium manufacturer Rational, in an electric version, manufactured in 2019 and equipped with a fully automatic self-cleaning system! The unit has been completely overhauled in our in-house workshop and is fully functional. The combination steamer shows signs of wear, see photos. The base frame shown in the picture is not included in the offer but can be purchased as an option. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational appliance model? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This unit is the optimal choice if you are looking for a classic combination steamer that you want to operate manually. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Nledpfx Aoz Dg Svsgreg Tested & fully functional Flexible choice of shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The Combi Master® from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845 x 850 mm Power connection: 400 V / kW: 11.0 / 50-60 Hz Capacity: 5x1/1 GN Weight: approx. 103 kg Serial number: E61MI19122799286 Year of manufacture: 2019 Condition: used, overhauled, fully functional Further information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings pre-prepared and chilled dishes to the ideal serving temperature in an optimal environment Automatic separation of grease for clean cooking chamber air Fully automatic cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food Ventilated double-pane glass (swiveling for easier cleaning) Core temperature measurement using a sensor Cool-down function High-performance fresh steam generator (automatic rinsing and draining) Handheld spray with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Subject to changes and errors. The sale is exclusively subject to our general terms and conditions.

Condition: used, functionality: fully functional, The 16-channel FT2M control system from MTS was in use until recently and is now for sale. All 16 system cables for 16 control channels—force, displacement, and servo valve—are included. PC and system software are included. Nledpfx Ajwv Uqiegrsg Equipment: 16 pcs: Dual Valve Driver Board 497.26 16 pcs: AC Amplifier Board AC Cond 497.13B 16 pcs: Dual DC Amplifier Board 497.22C 4 pcs: 497.01 Analog Chassis (19" rack) 4 pcs: Power supply +-15V/+5V 4 pcs: Station Control Card 497.34 4 pcs: RS232 Communication Card 497.36 1 pc: Hydraulic Control Panel 497.05 for 4 stations 1 pc: Global Resources III Card 498.71B 4 pcs: ADDA Card 498.65 2 pcs: PROC CPU 498.96-3

Condition: excellent (used), For sale is a professional Dr. TRESKY AG T-3000-FC3 station, manufactured by a renowned Swiss company. This is a high-quality laboratory device designed for the precise assembly and positioning of semiconductor structures (Die Bonding / Flip-Chip Assembly). It is used in research laboratories, as well as in the production of electronics, photonics, optoelectronics, and microelectronics. The T-3000-FC3 model is one of the most versatile platforms from Tresky and enables the execution of both basic and advanced assembly processes. Technical specifications: Manufacturer: Dr. TRESKY AG Model: T-3000-FC3 Country of manufacture: Switzerland Type: manual Die Bonder / Component Placer FC3 Bond Force Control controller Olympus SZ51 stereoscopic microscope Precision XY table Bond force control Vacuum and pneumatic system LED work lighting Documentation included Numerous working tips, holders, and accessories as shown in the photos Applications The device is used for: assembly of semiconductor devices (Die Bonding), Flip-Chip technology, assembly of MEMS components, production of photonics and optoelectronics, assembly of VCSEL lasers, assembly of sensors and hybrid circuits, research and development work and prototyping. Njdpszi Upcsfx Agrelg Condition The device is sold with extensive equipment as shown in the photos: Olympus microscope, FC3 controller, documentation, drawers with accessories, set of tools and working tips, pneumatic components and accessories. The visual condition is very good. It is sold exactly in the configuration shown in the photos.

Condition: good (used), Kistler NC joining module with dual-station/spindle unit Kistler NCFH 60 servo press with feed slide & spindle station The Kistler NCFH 60 NC joining module is integrated into an industrial dual-station/spindle unit designed for automated series production (e.g., friction welding or precision pressing). The system is characterized by exceptional precision, integrated force-displacement monitoring (piezoelectric sensor technology), and an extremely robust design capable of withstanding continuous industrial loads. Precise press-fitting and joining: Ideal for high-precision assembly processes in the automotive industry, electronics manufacturing, or general mechanical engineering. Integrated quality assurance (force-displacement monitoring): Using built-in piezoelectric sensors, the module measures the exact tensile and compressive forces acting during the pressing process in relation to position. Flexible process control: Enables advanced functions such as "joining to block," position-controlled pressing, or force-controlled joining (when combined with a suitable controller, e.g., Kistler maXYmos). Automated workpiece holding: The coupled spindle station features an automated clamping function (pneumatically or hydraulically actuated via integrated cylinders), making it perfect for automated series production and assembly lines. Sturdy machine bed: The entire mechanical assembly is mounted on a heavy-duty welded steel frame to withstand the immense forces (up to 6 tons per side) generated during operation. Joining module manufacturer: Dr. Staiger Mohilo+Co GmbH / Kistler Group Nedpfjzcpnzsx Agrjlg Type: 2151B 60304002 Model: NCFH 60 400 300 B H C G Nominal force: 60 kN (equivalent to a pressing force of approx. 6 tonnes) Max. total spindle stroke: 400 mm Max. travel speed: 300 mm/s Motor type: AC hollow-shaft servo motor (165H-180E) Holding brake: 18 Nm Certification: CE marking Scope of delivery: Kistler NCFH 60 joining module including mounted flange coupling, yellow slide/feed guide, complete sensor cabling, and the associated spindle clamping station. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, mileage: 6,348 km, power: 140 kW (190.35 HP), first registration: 08/2004, fuel type: diesel, Year of construction: 2004, Manufacturer Case Model MXM190 / Samson Vacuum Cleaner 8000 L Year 2004 Condition Good Serial Number ACM231045 Ref. nr. 8084 Reg. date: Hk: 190 Hour: 6348 Gearbox: Full powershift 19+6 Diesel tank: 1 Tank liter: 400 L Radio: ? Air seat: ? Disc brake: Wet brakes Tire Size: 600/65R25 + 650/75R38 - 520/70R34 Cover% left 60% 90% - 40% Toolbox: ? Hydraulic system: ? Manufacturer: Samson Tank capacity: 8000 L High pressure pump: 2 x HPP High pressure capacity: 122 l/min - 130 bar Nlodpfxjynq Dbs Agreg Vacuum pump: Samson Remote control: ?

Condition: used, Year of construction: 2024, controller model: , _____ Description: Year of manuf. : 2024 Punch Model:Dynamic Version Max. sheet size without repositioning:3,100 × 1,550 mm Positioning speed (X/Y axes):1,500 mm/s Max. punching speed:900 1/min Laser power:4 kW (IPG) Revolver :-20 stations, 10 of which are rotatable Nlsdpfx Agsz Exv Nsrsg :-1× MT16 multi-tool station :-1× MT6 multi-tool station, rotatable :-Thread forming station :-Forming station Features :-Automatic die adjustment :-Camera monitoring :-Remote control panel :-Accessory kit :-Nitrogen purge :-Locking cylinder for R-Multitools :-Multithread lubricator, tool lubrication :-Punch part flap :-Small laser part flap :-Large laser part flap :-Scrap conveyor belt

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Nlodpozc D Ensfx Agrjg Head and turntable: 1600 x 1450 mm

Condition: used, Year of construction: 2008, bar material dia. 65 mm turning speeds 5.000 min-1 Number of working hours 34979 h spindle hours 72260 h control FANUC 310 i weight of the machine ca. 8800 kg dimensions of the machine ca. 4500x1990x2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW Nlsdpfx Ajyat Hvogrjg DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm Translated with (free version)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 16,140 h, functionality: fully functional, machine/vehicle number: 111214, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, overall weight: 7,800 kg, TECHNICAL DETAILS Travel range X-axis: 1,100 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of positions in tool changer: 30 Table dimensions: 1250 x 610 mm Nodpfxjz Apdzj Agrelg MACHINE DETAILS Control system: Heidenhain 530 Operating hours: 16,140 h Machine weight: approx. 7,800 kg

Condition: used, Year of construction: 2007, Number of working hours 20456 h spindle hours 75180 h control FANUC 310 i chuck diameter 175 mm turning speeds 5.000 min-1 weight of the machine ca. 8800 kg dimensions of the machine ca. 4500 x 1990 x 2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Nljdjydfq Ijpfx Agrsg Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm

Condition: like new (used), Year of construction: 2020, operating hours: 3,270 h, functionality: fully functional, overall weight: 20,000 kg, Equipment: chip conveyor, documentation/manual, REIDEN RX 10 CNC control system: SIEMENS SINUMERIK 840D solution line, Sinumerik Operate 5-axis simultaneous machining 5-axis machining center with a 5-position pallet changer Travel ranges X-axis = 1,000 mm Y-axis = 1,100 mm Z-axis = 810 mm A and B axes Automatic horizontal/vertical swivel milling head as a fully functional, stepless NC axis from -1° to +90° NC rotary table NC rotary table Ø 1,000 x 800 mm - 360° continuously rotatable Nljdpsz Dn Hbsfx Agrsg - Swivel circle Ø 1,350 mm - Table height above the workshop floor 1,050 mm - Max. table load 1,600 kg Main spindle drive DDT Speed 16,000 min-1 - Main drive 38 kW (100% duty cycle) - Torque 105 / 135 / 155 Nm (100% / 40% / 25% duty cycle) - Tool holder HSK 63-A Tool changer and tool magazine designed for 260 tools with HSK-A 63 Internal coolant supply with 80 bar (Form A) with 20 l/min, incl. paper band filter Laser tool setting, wear measurement and breakage monitoring, LC 50 version, Radio measuring probe, manufacturer Renishaw RMP 60 with HSK63-A Change station with H-gripper - Complete rotary table unit incl. zero-point clamping system - Additional pallet carrier with 4 pallet positions - Loading station that can be loaded with a crane - 5 pallets ø 1,000 x 800 mm, incl. MDynamics package for 5-axis machining - Advanced Surface application memory on CF card - Spline interpolation - Transmit and surface transformation - Automatic measuring cycles - 3D simulation - Sketching - ShopMill / ShopTurn - Work step programming - Residual material detection - Machining package for 5 axes - 3D tool radius compensation - DNC data transfer via LAN - Kinematics measurement (if measuring probe is available) - Programmed according to REIDEN standard Cooling unit / cooling system Water cooling system for milling head, rotary table motor, all feed motors and various bearing points 3 cooling circuits, cooling capacity 7 kW, tank capacity 40 l.

Condition: not inspected (used), Year of construction: 2010, functionality: limited functionality, Featuring a robust design and ISC-B20 touch screen control, our CLB-800 brine mixing station is jacket cooled and efficiently mixes up to 800 liters of brine. Operators simply add ingredients to the hopper, which are then pumped into the brine mixing tank via the machine’s water line. The tank continues to fill with the amount of water necessary to create the ideal mixture. The final blend is continuously circulated throughout the tank. - Stainless steel construction - 800-liter capacity Njdpfx Ajv Id Tfjgrolg - ISC-B20 touch screen computer control stores up to 99 product programs - Double jacketed cooling - Hermetically sealed cooling aggregate with glycol - Electronic temperature control - Filling hopper for additives - Drain valve enables easy unloading or brine may be pumped to dedicated lines - Glass gauge for fluid level measuring

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: E22SI18052669752, This is a combination oven/steamer SCC 202 WE, in an electric version, from the premium manufacturer Rational, manufactured in 2018. The unit has been in operation for 7,679 hours. The combination oven/steamer is located in our in-house workshop and will undergo a thorough inspection before being sold with a 6-month warranty. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational appliance type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Tested & fully functional. Flexible options for shipping or self-collection. Competent advice - before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. This combination oven/steamer offers space for 20 x 2/1 or 40 x 1/1 GN containers. In automatic mode, the unit automatically recognizes the ideal cooking process, the size of the food, the quantity to be cooked, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 1084 x 996 x 1782 mm Minimum door opening dimensions for transport W x H: 1145x1900mm Njdpfxjzkhz Ij Agrelg Power connection: V: 400 / kW: 65.5 / Hz: 50/60 Weight: approx. 351 kg Serial number: E22SI18052669752 Year of manufacture: 05/2018 Condition: Used, inspected, and fully functional. Additional information: In combination oven/steamer mode, 3 operating modes are available: steam (30°C to 130 °C), hot air (30°C to 300°C), and combination (30°C to 300°C). Core temperature probe. Integrated energy optimization. Care Control - self-cleaning. Handheld spray gun with automatic retraction. 8.5-inch color display and touchscreen. 5 fan speeds programmable. Integrated, maintenance-free grease separation system. Automatic start time setting. 7 cleaning levels for unattended cleaning – even overnight. Moisture can be adjusted in 3 levels - from 30°C to 260 °C. 5 programmable fermentation levels. USB interface. Seamless, tub-shaped hygienic cooking chamber, rounded corners. Halogen cooking chamber lighting. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: ZP/03/2023, type of input current: three-phase, input voltage: 400 V, type of cooling: water, overall weight: 810 kg, welding power (max.): 94 kVA, nominal power: 80 kW (108.77 HP), nominal power (apparent): 80 kVA, air pressure: 6 bar, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, For sale: automated resistance spot welding cell SHILOH ZP-04, manufactured in 2023 and built around an ASPA ZPm-80 resistance spot welding machine. The base welding machine is an ASPA ZPm-80, manufactured in 2022, serial number 03510134. In 2023, the machine was integrated into a complete automated welding station ZP-04 and equipped with new control, safety, and process systems. The complete welding station was manufactured and assessed by Shiloh Industries Sp. z o.o. as a new machine in 2023 and has its own machine serial number ZP/03/2023. Technical data: - Manufacturer of welding station: Shiloh Industries - Welding machine: ASPA ZPm-80 Nsdpfxoz Dlbvj Agrelg - Station type: ZP-04 - Year of manufacture of station: 2023 - Year of manufacture of ASPA welder: 2022 - Station serial number: ZP/03/2023 - ASPA welder serial number: 03510134 - Nominal power: 80 kVA - Supply voltage: 400 VAC - Control voltage: 24 VDC - Pneumatic supply: 6-8 bar - Total machine weight: approx. 830 kg - Welding process: resistance spot welding Equipment: - Siemens S7-1200 PLC control system - Siemens SIMATIC HMI operator panel - TECNA TE550 welding controller - SICK safety system - Two-hand operator control - Additional touch-control panel - Proportional pressure control for the welding electrode - Part positioning and inspection system - Reject chute for non-conforming parts - Pneumatic control system - Optical and acoustic machine status indication - Integrated extraction / ventilation system The machine comes from an automotive production environment and was purchased from Shiloh Industries. The welding cell is complete and suitable for industrial series production. Inspection and test run are possible before purchase. Extensive technical documentation is available, including: - Electrical diagrams - Pneumatic diagrams - Operating instructions - Mechanical documentation - Safety documentation - Lockout / LOTO documentation - CE Declaration of Conformity - Machine risk assessment - ASPA documentation - TECNA TE550 controller documentation - Component documentation VAT invoice available. Transport can be arranged upon prior agreement. Further technical information and documentation available on request.