Used Schabmüller R178/2,2Rk159/132 for sale (1,104)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it Pedpfjzu Aibsx Amxjrb - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: WRE-200920166278FL, CNC Milling Plotter CNC-1325 5.5 kW Working area: 1300x2500, Z-300 mm - DSP NK 105G2 controller with proprietary processor, allowing parameter changes during machine operation - Modern software for easy creation of 2D, 2.5D, and 3D files from images - Brushless spindle, industrial-grade bearings, water-cooled, 5.5 kW (24,000 rpm) - Digital drives with rack and pinion transmission (X, Y axes) - Helical rack gears - Z axis driven by TBI 25mm ball screw - Chip extraction brush - Welded steel frame - Automatic tool length calibration sensor - WIWIN-25mm linear rail guides - Vacuum table with 4 suction zones - BUSCH-250 vacuum pump - Oil mist tool cooling system - Automatic tool changer, 5.5 kW ATC spindle - Chiller unit for ATC spindle cooling The machine is in excellent condition, used only occasionally. Sold complete with vacuum pump. Psdpfxjy Au Eao Amxerb For further information please call: Piotr Żołnierczyk, tel. 606 666 023.

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units Psdpfx Amozx Ennjxjrb multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor, crane motor -Manufacturer: ABM Greiffenberger Prsdsxamghspfx Amxjb -Engine: Type 3G225F/132 / D 80 b-4 -Power: 0.75 kW -Speed: 4 rpm -Design: B5 -Shaft: Ø 65 x 105 mm -Protection class: IP 54/55 -Dimensions: 705/305/H400 mm -Weight: 106 kg

Condition: used, first registration: 06/2004, empty load weight: 3,585 kg, maximum load weight: 14,415 kg, overall weight: 18,000 kg, tire size: 445/45 19,5, tire condition: 60 %, axle configuration: 2 axles, color: black, driver cabin: day cab, emission class: none, suspension: air, Year of construction: 2004, front tire size: 445/45 19,5, rear tire size: 445/45 19,5, Equipment: ABS, truck registration, Vehicle number for inquiries: 41757 Krone, ZZW 20 * Year of manufacture: 2004 * ABS, Anti-lock Braking System * EBS, electronic braking system * Air suspension * Tandem trailer * 7.45 * 7.82 * Air coupling (Duomatik) * Spare wheel holder * Connection plug 2x7-pin * Lifting and lowering mechanism * Storage box / toolbox * Other * Suspension: Air * Gross vehicle weight: 18,000 kg * Tare weight: 3,585 kg * Payload: 14,415 kg * Permissible gross vehicle weight: 18,000 kg * Tire condition 1st axle: 50% - 60% - Tire size: 445/45 R19.5 * Tire condition 2nd axle: 60% - 50% - Tire size: 445/45 R19.5 * Tire condition spare tire: 40% Pjdpfxez Ef Dte Amxsrb * Tire sizes: 445/45 R19.5 * Parking height: 1320 mm * Lifting range 1040 mm to 1380 mm Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC machining center Hedelius Forte 65 Single 1320 Control system: Heidenhain TNC 640 Year of manufacture: 2019 Availability: in transit Internal machine number: 74 Travel distances: X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area: 1,500 x 650 mm Table load: approx. 1,200 kg Tool holder: HSK 63 Tool magazine: 65 positions Spindle speed: 18,000 rpm Drive power: 35 kW Equipment: - Inclined bed coolant system, 900 l - Internal cooling lubricant system, 25 bar Prjdpfxjzzmirs Amxjb - Chip conveyor - 1x flushing gun - Electronic handwheel

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic modules, PLC controller, digital input, digital output, electronic block, decentralized peripheral device Pjdpfxjxphu So Amxorb -Manufacturer: Siemens, SIMATIC S7, Distributed I/O device from vertical lathe Scherer VDZ 80 DS -Type: ET 200L 6ES7 132-1BL00-0XB0 -Additional terminal: 6ES7 193-1FL30-0XA0 -Number: 4x module available -Price: per piece -Dimensions each: 190/135/H75 mm -Weight: 0.8 kg/piece

Condition: new, HFB 6/360.07.637.01 thread SN 8E298 KGT type 50x5x1325 + 2x ball bearings, used, in good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Pedpfx Aoqdm Nnjmxorb

Condition: used, mileage: 135,000 km, power: 175 kW (237.93 HP), first registration: 11/2008, fuel type: diesel, overall weight: 13,500 kg, next inspection (TÜV): 04/2027, emission class: euro5, loading space length: 7,300 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, Equipment: ABS, parking heater, tail-lift, Atego 1324 Registration date: 11/2008 !!!! ONLY 135,000 km !!! Euro 5 MOT valid until 04/27 Prjdpfoz Am Tyox Amxeb Auxiliary heater Automatic transmission Suspension: Air-on-air Payload 5200 kg Bär tail lift Loading dimensions: 7.3 m height, 2.3 m width, 2.45 m Unit: Thermoking TS 600 !!!! UNIT HAS ONLY 400 DIESEL RUNNING HOURS !!!!! Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian… Goran German/English/…? … Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: €2000 Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: new, For sale: Electric motor from the renowned German company Kuenle Elektromotoren Model KPER 132 S4 The motor is new, warehouse surplus Never used Very good condition, possible storage marks visible in photos Technical data: Power: 5.5 kW Speed: approx. 1440 rpm Voltage: 380/660 V Frequency: 50 Hz cos phi: 0.82 Protection class: IP54 Design: IM B3 Made in Germany Applications: industrial machinery pumps fans Pedpfxeyv R Sis Amxerb production lines automation Robust, high-quality German industrial motor Ready for operation immediately after connection

Condition: new, mileage: 100 km, power: 355 kW (482.67 HP), fuel type: diesel, overall weight: 26,000 kg, gearing type: automatic, Equipment: soot filter, * 1 Lane Change Warning System * 1 -----Color/Paint----- 1 Chassis color: Anthracite Grey * 1 Cab color: E1980WHTE CRYSTAL WHITE * 1 Lower cab panel: Crystal White * 1 Mirror housing: Crystal White * 1 -----Tires/Wheels----- 1 Goodyear * 1 F1, 315/70R22.5GO EQMSU 158/150 L Steering ABA 3P * 1 R1, 315/70R22.5GO EQMDU 154/150 L Traction ABB 3P * 1 R2, 315/70R22.5GO EQMSU 158/150 L Steering ABA 3P * 1 RR, not applicable * 1 -----Equipment/Optional Equipment----- 1 Mechanical cab suspension * 1 Adaptive Cruise Control with FCW and AEBS-3 * 1 Emission class: Euro 6 * 1 OBD-E engine H6, fuel B7 * 1 Automated transmission, TraXon, 12 gears * 1 Standard component layout * 1 BDF pack multi-body system 1120-1320 mm, prepared * 1 Sleeper High Cab * 1 Chassis design front: Aero base plate * 1 Exterior sun visor * 1 LED headlights, cornering and fog lights * 1 Headlights with height adjustment * 1 LED skylights * 1 Two LED headlights for cab rear wall * 1 Main mirror * 1 Convex main mirror * 1 Central locking, 3 keys, 2 remote controls * 1 Adjustable roof spoiler short, Sleeper High Cab * 1 Steering wheel, leather * 1 Dashboard design: Plateau * 1 Door panel: Loosely woven fabric * 1 Driver's seat: Luxury Air * 1 Armrests on both sides of the driver's seat * 1 Passenger seat: Cinema & table, fabric cover * 1 Armrests on both sides of the passenger seat * 1 Refrigerator and drawer * 1 Upper sleeper bunk * 1 Safety net on both sleeper bunks * 1 Curtains with dividing curtain * 1 LED interior lighting: Luxury * 1 Automatic cab climate control * 1 Roller blind passenger side * 1 Roof hatch with electric operation * 1 Accessory power supply: Standard + 2x 40 A * 1 ECAS remote control with extended functions * 1 FMS connector, extended and prepared * 1 PACCAR Connect with navigation and tablet software * 1 Digital tachograph, VDO 1C, version G2V2 * 1 Speed limiter setting 90 km/h * 1 DAF Infotainment Exclusive prepared, Luxury speakers * 1 Antennas: Radio, 2x mobile phone, GNSS Extra: CB * 1 Wireless charger * 1 Emergency hammer * 1 Rear warning system * 1 Front: 8.00 t, air suspension, 161 N * 1 Front air suspension: medium * 1 MX-13 engine, 355kW/483HP, cab emblem: 480 * 1 ECO mode * 1 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 * 1 Traction aid 15.0 t * 1 Rear axle ratio 2.47 Psdpfxjy Tgq Aj Amxorb * 1 Mechanical differential lock * 1 ZF Intarder * 1 Parking brake assistant * 1 Compressor 2 cylinders without clutch * 1 Wheelbase 4.80 m/rear overhang 1.62 m * 1 Longitudinal member 260/7.0 mm, continuous internal reinforcement * 1 EAS unit right, vertical battery box + 75-liter air tank left * 1 Air pressure tank made of aluminum * 1 960-liter aluminum fuel tank: 620 liters left + 340 liters right, height 620 mm * 1 Fuel tanks left and right * 1 Rear fender * 1 Two wheel chocks * 1 Four LED work lights * 1 Rear lights with LEDs * 1 Cross member D137 + Ringfeder coupling D137 * 1 Fixed wired body signals and warnings * 1 Preparation for aftermarket switches * 1 Chassis preparation for BDF multi-system * 1 Preparation for interchangeable systems * 1 Fixed control gear auxiliary drive, no 1st gear auxiliary drive * 1 Generator 130 A, batteries 2 x 210 Ah AGM * 1 Battery energy monitoring * 1 Additional cab insulation * 1 Maximum ambient temperature 45 degrees * 1 Warranty Plus vehicle - 3 years - no mileage limit * 1 Extended maintenance interval * 1 Jack * 1 Standard

Condition: used, mileage: 23,473 km, power: 74 kW (100.61 HP), first registration: 01/1955, fuel type: diesel, color: red, driver cabin: other, gearing type: mechanical, number of seats: 6, total length: 8,000 mm, total width: 2,300 mm, total height: 2,950 mm, Year of construction: 1954, Vehicle location: Bovenden, Color: red Prodpfjvhk Ucjx Amxob Imitation leather: red German car, classic car with H-approval German vehicle documents and Classic Data short evaluation 2019 (with condition 2- description) are available. Former fire engine, built in 1954 Unladen weight 7000kg L 8.0m x W 2.3m x H 2.95m 6-cylinder diesel engine Top speed: 85 km/h Equipped with various emergency equipment and devices: Blue emergency lights, radio + telephone and large ladder. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), flat gear motor, geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: Nord, gear motor -Type: 1SU63A-80 L/4 i = 18.50 -Speed: 76 rpm -Engine: Nord Type SK 132 M/40 -Power: 9.2 kW / 1450 rpm -Voltage: 400/690 V Psdpfx Amst E D Hvjxjrb -Hollow shaft: Ø 50 x 195 mm -Protection class: IP55 -Dimensions: 620/320/H465 mm -Weight: 125 kg

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise Psdszlbpzspfx Amxorb - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: new, For sale: professional electric motor from the renowned German company VEM motors GmbH Prodeyv R Rfspfx Amxob Model KTTR 132 SX2 The motor is new, stored in a warehouse, and has never been used. Very good condition, with possible minor signs of storage. Technical data: Power: 7.5 kW Speed: approx. 2880 rpm Voltage: 400/690 V Frequency: 50 Hz Current: 14.5/8.4 A cos φ: 0.86 Protection rating: IP55 Insulation class: F Weight: approx. 57 kg Design: IM B3 Made in Germany Applications: – Industrial machinery – Pumps – Fans – Production lines – Automation A solid and reliable motor, ideal for operation in demanding industrial conditions.

Condition: good (used), MANUF. CompAir MODEL L132-7.5A S/N 349021/0688 Year 2003 Power (kW) 132 Output (m³/min) 20.4 Pjdpfoyn Ef Tex Amxorb Pressure (bar) 10

Condition: used, Year of construction: 2016, mileage: 113,520 km, power: 170 kW (231.14 HP), first registration: 07/2016, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 09/2028, gearing type: mechanical, emission class: euro5, loading space volume: 6 m³, Equipment: ABS, air conditioning, Internal vehicle number: G400240 Available immediately at our yard in Kaufungen. More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) Podpfxoz D N R Us Amxerb * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Financing example: * Internal number: G400240 * Purchase price: 54,900.00 € * Down payment: 10% * Term: 60 months * Monthly rate: 849.02 € Residual value: 10,380.00 € If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit Predpfx Amozpzy Ijxeb - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input Prsdpsmhmx Uofx Amxeb -Manufacturer: Siemens, Simatic S7 digital output electronic modules ET 200S -Electronics module: type 6ES7 132-4BD00-0AA0 -Terminal module: 6ES7 193-4CB30-0AA0 -Number: 14x module available -Price per piece -Dimensions: 130/20/H75 mm -Weight: 0.1 kg/pc

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2009, total length: 8,400 mm, total width: 2,550 mm, suspension: air, wheelbase: 6,770 mm, color: other, Year of construction: 2009, Equipment: ABS, = Additional options and accessories = - ADR - BPW Axles - Drum brakes = More information = Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Empty weight: 3.300 kg Prodpfx Aez Avvkomxjb Carrying capacity: 35.700 kg GVW: 39.000 kg Registration number: OK-05-YF

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Edge banding machine: Year of manufacture: 2018 Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Edge Control 19 control system with 18.5" touchscreen color display 16:9 Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Prjdpfx Aozt Twtemxob Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Return system: Year of manufacture: 2018 Machine number: 2180122-206 Further details can be found in the PDF Availability: by arrangement Location: Röllbach

Condition: excellent (used), Year of construction: 1998, operating hours: 83,281 h, functionality: fully functional, power: 132 kW (179.47 HP), volume flow: 1,290 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Oil-free screw compressor Prodpfx Amjy Hr Tijxjb 132 kW 7.50 bar 21.50 m3/min Year of manufacture: 1998 Operating hours: 83,281

Condition: excellent (used), mileage: 301,321 km, power: 125 kW (169.95 HP), first registration: 01/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,760 mm, fuel: diesel, fuel tank capacity: 200 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, number of seats: 2, total length: 9,200 mm, total width: 2,550 mm, permissible axle load (axle 1): 4,700 kg, permissible axle load (axle 2): 9,300 kg, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, Year of construction: 2021, Equipment: AdBlue, tail-lift, Technical Information Number of cylinders: 4 Engine displacement: 5,132 cc Maximum front axle load: 4,700 kg Maximum rear axle load: 9,300 kg Weights Unladen weight: 7,030 kg Payload: 6,470 kg GVW (Gross Vehicle Weight): 13,500 kg Functional Features Tail lift: DAUTEL, tailgate, 2,000 kg Maintenance, History, and Condition APK (Technical Inspection): New TÜV (German technical inspection) upon delivery Technical condition: very good Optical condition: very good = Company Information = Prodpoz E Dxiefx Amxjb Hello

Condition: used, Year of construction: 2011, Technical details: temperature min.: 1 ° temperature max.: 199 ° electrics - voltage/frequency: 380 / 50 V/Hz heating capacity: 1,8 (1800 Watt) kW protection class: IP 54 total power requirement: 16,2 kW weight of the machine ca.: 0,93 t dimensions L x W x H: 2,85 x 2,0 x 1,4 m Pre-polymerization tunnel - Heat treatment tunnel Application: drying for washing and painting lines - pass through Sold as is and described! other features: -recommended temperature according to manufacturer max. 80°C; safety setting 90°C; heating 230V -with chain conveyor/feed line made of Teflon -chain width 200mm Podpsu Nw E Ujfx Amxjrb -max. workpiece width 150mm passage W: 150 x H: 110mm, running height 600mm; operation motor SEW Eurodrive (gear motor) power 0,18kW loading W x H: 500 x 800mm unloading door W x H: 600 x 1200mm access door W x H: 800 x 980mm with safety locking system room height 1400mm *

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear door Equipment: - Multiplex walls - 6x tie-down points - Single-leaf rear door Net: €2,899.16 / Gross: €3,450.00 Article number: HKP113251315.01 Technical data: • Brand: Humbaur • Model: HK 132513-15P • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU: 2 years from first registration • Interior dimensions (LxWxH): 251 x 132 x 152 cm • Exterior dimensions (LxWxH): 378 x 181 x 211 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,300 kg • Tare weight: 410 kg • Payload: 890 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Side walls and roof made of multilayer wood, 15 mm thick, with UV-resistant plastic coating • Stable V-shaped drawbar, hot-dip galvanized • Longitudinal beams continuous • Single-leaf door at the rear • Twist-lock and hinges galvanized • 1x maneuvering handle at the front • Tie-down points in the frame profile, tensile force 400 kg per tie-down point, Dekra tested • Reverse automatic • ALKO coupling and parking brake • Plastic fenders • Interior light installed • 13-pin connector • Rear lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamp in the center _____ Accessories can be retrofitted by our specialist workshop!! Psdpszy Axmofx Amxsrb - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -