Used Schiavo Easy 1600 for sale (7,836)

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 3,220 h, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,860 mm, load center: 800 mm, fuel type: electric, mast type: duplex, battery capacity: 930 Ah, battery voltage: 48 V, fork carriage width: 2,840 mm, fork length: 1,600 mm, ground clearance: 130 mm, turning radius (outer): 1,950 mm, total height: 2,710 mm, total length: 2,840 mm, total width: 2,670 mm, color: white, Equipment: cabin, Electric four-way reach truck HUBTEX MQ 30, first owner, in very well-maintained condition: – Model MQ 30 AC / Series 2125-EL (larger model series) – Designed for the transport and stacking of wood-based panels – Load capacity 3000 kg at LSP 800 mm to H3 5000 mm – Load capacity 2670 kg at LSP 1050 mm to H3 5000 mm – NB = 1600 mm useful width – MV = 1700 mm mast extension – RB = 2670 mm frame width – b1 = 1040 + 30 mm front dimension – b2 = 1070 mm front dimension with reinforced fork carrier – RL = 2440 mm frame length – KÜ = 180 mm cab overhang – GL = 2840 mm overall length over fork carrier – Ra = 1340 mm wheel arm clearance – SH = 2500 mm height above driver protection roof (+300 mm) – Rh = 500 mm height wheel arms – BF = 130 mm ground clearance lower mast – Wa = 1950 mm turning radius – 3-stage lift mast H 60 TIL (very stable) – H1 = 2707 mm height of lift mast retracted – H2 = 1867 mm free lift – H3 = 5000 mm lift height (top of fork tines) – H4 = 5840 mm height of lift mast extended – VH = 840 mm height fork carrier – Intermediate lift limitation at H3 = 3900 mm – Long load fork carrier Type II, GTL = 2840 mm – Fork carrier in low and reinforced design – Fork adjustment hydraulically from 560 to 2840 mm (adjustable forks) – Fork tilt hydraulically +5 / –3 degrees – Fork tines (pair) length 1600 mm – Fork cross-section 50 x 150 mm – Multi-directional steering system H4 electronically controlled – 4 steering programs with longitudinal/lateral travel and circular/diagonal travel – Service brake as an automatic regenerative brake – Parking brake as an electro-magnetic parking brake – 4-wheel chassis with two vertical motors and heavy-duty load wheels – 2-piece swing axle with mechanical level compensation – Tires, drive side 2 x 457 x 200 mm Super-Elastic – Tires, load side 4 x 381 x 127 mm solid rubber – Motor control with three-phase motor and inverter – Drive power 2 x 4.0 kW – Working hydraulics with proportional valve technology, continuously adjustable – Lift power 14.0 kW – Steering power 4.0 kW – Operation via multi-function joystick – Driver's cabin as a lateral seat cabin Q850 with 830 x 850 mm – Entry and exit on the racking aisle side – Driver protection roof with laminated safety glass – Safety glass on the load side, front, and battery side – 2 work spotlights on the cabin roof – Comfort seat, vibration-damped, adjustable in multiple ways – On-board computer Hubtex HIT 2 – Paint finish RAL 9002 grey-white and RAL 7021 black-grey Hedpfx Aaezugt Rsmonr – Battery 48V 6EPzS 930 Ah – Battery charger D400G48/125 for 12-14 hours charging time – Aquamatic and filling station – Battery 48V 6PzS 930 Ah with tray renewed in 03/2021 – Year of manufacture 2006, operating hours original 3220 h – First owner, very well-maintained condition – Truck always stored in a heated hall – Regular maintenance by Hubtex – Last maintenance in 08/2025 at 3100 h – New maintenance possible upon agreement – Application was for feeding a wood-based panel saw – Sale due to automation of the panel saw – Inspection and test run possible upon agreement – Sale from location Karlsruhe / Southern Germany

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function Hjdpfey Saqgsx Aamjnr - Repositioning cylinder - Warp detection

Year of construction: 1997, condition: used, Built in 1997 Hodpfx Ajc Nhpfoamenr Input height max 500 mm Output level max 3.000 mm Length conveyor belt approx. 54 m Equipment • drying tower downward • infeed left at the top • outfeed 90° at the bottom

Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2004 Product number: 04177/1 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Producer: MCRS Hnsdszumxmopfx Aamor Type: PRN-6.3 Year of production: 2018 Product number: 18014/5

Condition: good (used), Year of construction: 2005, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2005 Product number: 05026/4 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns - 1÷4 bar Working air pressure for opening the guns - 5÷6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min ROLLER TRANSPORTER type PRN-6.3 Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/1 Working height - 920 mm +/- 50 Roll working width -1610 mm Total width - 1700 mm Roll diameter - 53 mm Total length - 6300 Movement speed - 20 m / min Weight - 320 kg Power supply - 400V 50Hz 6 bar TRANSPORTER PPR1050 Producer: CEFLA Type: PPR 1050+ TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Hnsdpfx Aszumvxeamsr Transporter with a length of 1050 mm and a working width of 1250 mm with two speed ranges: low from 1.7-11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min (for the time of loading into the dryer carousel). Main engine power 1.72 kW. TRANSPORTER TRC2000 Producer: CEFLA Type: TRC 2000/125 Year of production: 2005 Product number: 05026/1 Transporter with a length of 2000 mm and a working width of 1250 mm. The transporter is driven by a 0.25 kW engine and reaches a speed of 1.7-10.7 m / min. CEFLA OVEN (drying room) Producer: CEFLA Year of production: 2005 Machine for the complete or partial drying of paint products that are applied to the parts to be treated, such as linear panels of all kinds. Vertical two-zone platform oven with warm air drying. Evaporation fan flow - 2x8000 m3 / h Drying fan flow - 8000 m3 / h Installed thermal power - 130,000 Kcal / h Total installed power - 17 kW Compressed air consumption - 92 Nl / min Platform length - 3500 mm Overall dimensions - 5192x4120x4524 mm TRANSPORTER TRC3500 Producer: CEFLA Type: TRC 3500 / 2V / 125 Year of production: 2005 Product number: 05026/16 A conveyor with a length of 3500 mm and a working width of 1250 mm with two speed ranges: low from 1.7 m / min and high up to 10.7 m / min - for the time of unloading from the carousel dryer. Main engine power 2.2 kW.

Condition: used, TECHNICAL DETAILS - Table dimensions : 800 X 400 [mm] - Z stroke : 390 [mm] Hnodpfx Aey Abbzsamer - Maximum weight upon table : 500 [kg] - Grinding wheel diameter : 355x50x127 [mm] - Machine weight : 3700 [kg] - Supply voltage : 380 [V]

Condition: used, Year of construction: 1978, machine/vehicle number: 78004, functionality: fully functional, type of input current: three-phase, We are offering this used Csepel 12UH/1600 radial drilling machine, year of manufacture 1978. Model: 12UH/1600 Serial number: 78004 Power type: 3~ Wiring diagram no.: 358000 If you have any questions or require further information, please feel free to send us a message or give us a call. Hodpfjyh Uaqex Aamjnr

Condition: used, mileage: 27,117 km, power: 55 kW (74.78 HP), color: white, gearing type: automatic, total length: 40,150 mm, total height: 12,560 mm, Year of construction: 2015, Equipment: air conditioning, power assisted steering, For inquiries regarding the vehicle, please contact Mr. Seidel (by phone at ...). Hako Citymaster 1600 sweeper truck Articulated steering, air conditioning, rear view camera system, 1 seat, air-suspended seat, radio, automatic transmission, heated exterior mirrors, headlights: halogen, rotating beacons, tire tread: 1st axle 8-9 mm, 2nd axle 8-9 mm. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. You can find more information on our website. ... Errors, changes and prior sale reserved!!! = Further information = Engine displacement: 1,968 cc Hedpfxeztltto Aamsnr GVWR: 3,500 kg Please contact Tobias Ebert for more information.

Condition: new, fuel type: diesel, overall weight: 1,600 kg, empty load weight: 1,600 kg, Year of construction: 2024, GÜNTER GROSSMANN GG1600 MINI EXCAVATOR, 3-cylinder KUBOTA Günter Grossmann GG1600 Kubota Thanks to close collaboration between Günter Grossmann and Kubota, the new GG1600 excavator has been created. Track excavator Günter Grossmann GG1600. Mini excavator on tracks GG1600, KUBOTA engine, KDK hydraulic pump, VS EATON compressor motor. Very good quality. Standard equipment Excavation bucket 400mm Additional accessories for the machine can be purchased. Model GG1600 is a great machine for the most demanding construction, electrical, and hydraulic companies. We guarantee after-sales service. The excavator is manufactured based on solid European technology. SPECIFICATIONS Model: GG1600Y Hsdpfxoggai Uo Aamonr Brand: Günter Grossmann Weight: 1600kg Bucket capacity: 0.045 m³ / 200kg Engine: KUBOTA Engine power: 15 kw/2300r/min Main pump: Japan – KDK Japan Swing motor: American – EATON USA Travel motor: Korea – KOREA DONGHYUN WORKING RANGE Max. digging depth: 1650 mm Max. vertical digging depth: 1650 mm Max. digging height: 2610 mm Rotation radius: 360° Optional accessories available for order: Ground drill Grab Digging tooth Rake Narrow bucket 200 mm Narrow bucket 380 mm Leveling bucket 500mm Leveling bucket 800mm Quick coupler Breaker hammer GG1600 €13,400 excluding VAT GG800 Bn83wivh €5,900.00 including VAT €7,139.00 including VAT GG1000 €9,909.00 including VAT €8,190.00 excluding VAT transport costs on request We deliver to companies and private individuals in the Netherlands and Belgium! With each delivery, you will receive a VAT invoice and (factory) warranty. -Click on 'email this advertiser' and provide your contact details, and we will send you the webshop details. -tel (7 days a week from 8:00 to 23:00) -Collection is possible by appointment, also in the evening and on weekends. Easy payment... -via our webshop -Cash or card payment upon collection/delivery -Via iDeal (request a link via email) For GG 800 details, see our other advertisement. For more information, please call or email us. Lease negotiable.

Condition: used, power: 55 kW (74.78 HP), fuel type: diesel, fuel tank capacity: 140 l, lifting height: 17,550 mm, Year of construction: 2023, operating hours: 2,580 h, Equipment: air conditioning, Year of manufacture: 2023 Empty weight: 11.700 kg Carrying capacity: 4.000 kg GVW: 15.700 kg Hodpow Afp Njfx Aamsnr Dimensions (LxBxH): 627 x 242 x 250 cm Boom radius: 13.08 m

Condition: ready for operation (used), functionality: fully functional, mileage: 37,457 km, power: 55 kW (74.78 HP), first registration: 09/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 02/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 4,738 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as a winter service vehicle From first owner = former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 37,454 in 08/2026 2,584 hydraulic operating hours 4,738 total operating hours 37,457 kilometers Including Kif front sweeper, type CM 1600, 1,300 mm wide, manufactured in 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, manufactured in 2019 (as new/used twice for testing) 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning/heating Water treatment system Fire hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweepers, snow plows, and lawnmowers (not included in the scope of supply) Errors, changes, and prior sale are subject to change. We sell exclusively according to our general terms and conditions and with the exclusion of any warranty. Errors, changes, and prior sale are subject to change. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by prior appointment, and telephone appointments can be arranged outside of these opening hours. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. Hnsdezrrvxspfx Aamsr The above information is non-binding, and errors/changes and prior sale are subject to change!

Condition: ready for operation (used), operating hours: 4,738 h, functionality: fully functional, mileage: 37,457 km, power: 55 kW (74.78 HP), first registration: 09/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 02/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as a winter service vehicle From first owner = former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 37,454 in 08/2026 2,584 hydraulic operating hours 4,738 total operating hours 37,457 kilometers Including Kif front sweeper, type CM 1600, 1,300 mm wide, manufactured in 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, manufactured in 2019 (as new/used twice for testing) 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning/heating Water treatment system Hsdpfezrru Ijx Aamonr Fire hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweepers, snow plows, and lawnmowers (not included in the scope of supply) Errors, changes, and prior sale are subject to change. We sell exclusively according to our general terms and conditions and with the exclusion of any warranty. Errors, changes, and prior sale are subject to change. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by prior appointment, and telephone appointments can be arranged outside of these opening hours. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. The above information is non-binding, and errors/changes and prior sale are subject to change!

Condition: ready for operation (used), functionality: fully functional, mileage: 37,457 km, power: 55 kW (74.78 HP), first registration: 09/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 02/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 4,738 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as a winter service vehicle From first owner = former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 37,454 in 08/2026 2,584 hydraulic operating hours 4,738 total operating hours 37,457 kilometers Including Kif front sweeper, type CM 1600, 1,300 mm wide, manufactured in 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, manufactured in 2019 (as new/used twice for testing) 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Hnsdpfezrruzsx Aamsr Cab with air-suspended driver's seat Air conditioning/heating Water treatment system Fire hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweepers, snow plows, and lawnmowers (not included in the scope of supply) Errors, changes, and prior sale are subject to change. We sell exclusively according to our general terms and conditions and with the exclusion of any warranty. Errors, changes, and prior sale are subject to change. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by prior appointment, and telephone appointments can be arranged outside of these opening hours. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. The above information is non-binding, and errors/changes and prior sale are subject to change!

Condition: good (used), Year of construction: 2000, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, Basic data Clamping force: 160 t Year of manufacture: 2000 Control system: Selogica Injection weight: 154.7 g Hodpfezt Ikbjx Aamsnr Injection unit .../675 Screw diameter: 35 mm Injection volume: 170 cm³ Injection weight: 154.7 g Mold clamping unit 160/... Clamping force: 160 t Mold plate dimensions: 728 × 728 mm Distance between columns: 520 × 520 mm Mold height: 250 mm Opening stroke: 650 mm Maximum mold plate distance: 900 mm Ejector force: 50 kN Ejector stroke: 175 mm

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 650 mm, travel distance Z-axis: 800 mm, overall weight: 71,400 kg, spindle speed (max.): 105 rpm, spindle motor power: 100,000 W, number of axes: 2, Horizontal machining centre manufactured in 2004. This IRLE IRD 1600 CNC features a maximum pipe diameter processing capability of 1,625 mm and a maximum pipe length of 13,200 mm. It supports a maximum pipe wall thickness of 70 mm and can handle pipe weights up to 250 kN. If you are looking to get high-quality machining capabilities, consider the IRLE IRD 1600 CNC machine we have for sale. Contact us for further details. Hnedezr Nmuopfx Aamer - Max. Pipe Diameter to be Processed: 1,625 mm- Min. Pipe Diameter to be Processed: 406 mm- Max. Pipe Length to be Processed: 13,200 mm- Min. Pipe Length to be Processed: 6,000 mm- Min. Pipe Wall Thickness: 12 mm- Max. Pipe Wall Thickness (Copying Process): approx. 40 mm- Max. Pipe Wall Thickness (CNC Operation): 70 mm- Max. Pipe Weight to be Supported: 25500 kg- Height between Hall Floor and Pipe Inlet: 800 mm- Total Machine Length: approx. 24,000 mm- Total Machine Width: approx. 4,100 mm- Total Height from Floor to Top of Clamping Vise: 5,000 mm- Total Machine Weight: approx. 71400 kg- Operating Voltage: 400 V, 3-phase, 50 Hz- Control Voltage: 220 V DC / 50 Hz- Nominal Operating Current: 400 A- Intermediate Bed - Bed Length: approx. 3,950 mm- Intermediate Bed - Bed Width: approx. 1,800 mm- Intermediate Bed - Bed Height (incl. chassis): approx. 600 mm- Intermediate Bed - Travel Speed on Foundation Rails: 500 - 5,000 mm/min- Intermediate Bed - Drive Motor Power: 5.5 kW- Headstock - Faceplate Speed Range: 7 - 105 min⁻¹- Headstock - Motor Speeds: 300 - 4,500 min⁻¹- Headstock - Motor Power: 100 kW- Headstock - Motor Power (S1 Duty Cycle): 105 kW- Headstock - Max. Faceplate Torque (S1 Duty): 33,000 Nm- Headstock - Characteristic Speed: 27 min⁻¹- Headstock - Main Spindle Diameter (Front Bearings): 300 mm- Faceplate (X-Axis) - Faceplate Diameter: approx. 1,950 mm- Faceplate (X-Axis) - NC Tool Support Travel Range: approx. 650 mm- Faceplate (X-Axis) - Tool Support Feed Rate (Infinitely Variable): 0.5 - 1,500 mm/min- Faceplate (X-Axis) - Max. Achievable Feed Force: 25 kN- Feed Gearbox (Z-Axis) - Headstock Feed Travel on Machine Bed: 800 mm- Feed Gearbox (Z-Axis) - Feed Rate (Infinitely Variable via AC Servomotor): 0.5 - 200 mm/min- Feed Gearbox (Z-Axis) - Rapid Traverse Speed: 1,500 mm/min- Feed Gearbox (Z-Axis) - Feed Force: 30 kN- Feed Gearbox (Z-Axis) - Feed Motor Torque: 27 Nm- Pipe Clamping Steady Rests - Clamping Range: 406 - 1,625 mm- Pipe Clamping Steady Rests - Pipe Weight Capacity per Steady Rest: 150 kN- Pipe Clamping Steady Rests - Adjustable Clamping Force: 10 - 200 kN- Pipe Clamping Steady Rests - Max. Adjusting Speed of Centrally Moving Clamping Crossbars: 600 mm/min

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,390 h, load capacity: 3,300 kg, lifting height: 6,900 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 75 kW (101.97 HP), fork length: 1,200 mm, empty load weight: 7,700 kg, total length: 4,970 mm, drive type: Diesel, construction width: 2,390 mm, Rigid telehandler Mast type: telescopic Speed class: 20 Technical condition: good Front tyres type: pneumatic Front tyres size: 500/80-24 Front tyres condition: 80–100% Rear tyres type: pneumatic Hnsdpfx Aoyfivkeamsr Rear tyres size: 500/80-24 Rear tyres condition: 80–100% 3rd valve,

Condition: good (used), Hello, For sale: Vertical milling machine FSS-400/1600. Hnedexyi U Ispfx Aamjr The machine is operational, in continuous use, and available for inspection. The listed price is net; VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Year of construction: 2006, condition: good (used), Fully operational GOODSTRONG GMC-TC 1600 paper/cardboard roll-to-sheet cutting machine, manufactured in 2006. The machine is designed for the industrial conversion of paper and cardboard rolls into cut sheets. The system features an automatic edge-guidance mechanism that ensures precise positioning of the paper web during cutting, while the double rotary knife assembly guarantees clean and accurate edges. Model: GOODSTRONG GMC-TC 1600 Year of manufacture: 2006 Hnedpfx Aaezt R Hfsmjr Roll (web) width: 400–1600 mm (16″–63″) Simultaneous cutting: Up to 4 rolls at once Paper/cardboard grammage: 40–700 g/m² Cutting length: Up to 3000 mm Maximum cutting speed: Up to 300 m/min Control: Microcomputer system, AC servo motor, touchscreen panel Automatic edge guidance web system Double rotary knife

Condition: used, Year of construction: 2022, load capacity: 3,300 kg, lifting height: 9,070 mm, fork length: 1,200 mm, total length: 5,929 mm, · Max. Tragkraft 3300 kg · Max.Hubhöhe 9.07 m · Max. Auslage 6.35 m · Ausbrechkraft mit Schaufel 5770 daN · Schüttwinkel: 12 Grad Hnjdpfoztga Iex Aamer · Kippwinkel 114 Grad · Heben: 8,90s · Senken: 5,70s · Wenderadius (über Räder): 3,80m · Teleskop ausfahren: 14,6s · Teleskop einfahren: 8,80s · Ankippen: 3,30s · Auskippen: 3,10s · Motomom: Stage V / Tier 4 final · Anzahl der Zylinder / Tragfähigkeit: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW): 75 Hp / 55 kW · Max. Drehmoment / Motordrehzahl: 340 Nm @ 1600 rpm · Zugkraft 7320 daN · Anzahl der Gänge (v/h): 4/4 · Maximale Geschwindigkeit: 24,90 km/h · Hydraulikfördermenge / Hydraulikdruck: 92,7 l/min / 260 bar · Motoröl: 10l · Hydrauliköl: 128l · Fassungsvermögen des Kraftstofftanks: 120l · Geräuschpegel im Fahrerstand (LpA): 79 dB · Umgebungsgeräusch (LwA): 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: Standard EN 15000 / Cabin ROPS - FOPS Level 2 · Max. Hubhöhe: 9,07 m · Max. Auslage: 6,35 m · Ausbrechwinkel mit Schaufel: 5770 daN

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3 Hjdpfowu Ackjx Aamjnr

Condition: like new (used), Year of construction: 2018, overall weight: 750 kg, Brand: HDT Type: HD Pro6 Easy SI Year: 2003 / 2018 Power: 16 A Weight: 750 kg Hnedpfx Aozraafeamjr The HD Pro-6 Easy is the highlight of HDT's hydraulic manual sealing systems. The innovative hexagonal base frame guarantees increased stability, and the pivoting control panel is just one of the most noticeable features of the new high-tech version. The pivoting arm with pneumatic support enables effective integration into your individual workflow and optimal adaptation to local conditions. Pivoting control cabinet – always in the operator's field of vision Hydraulic unit with 4 kW and steplessly adjustable output New maintenance-free pump generation Increased dosing accuracy Mobile base frame, adapted for loading with pallet trucks: height approx. 20 cm Variable mixing ratio adjustable from 100:15 to 100:5 Roll-off track for easy drum change One-hand dosing control Pot life control Drum empty indicator (basic) Heated subsequent plate as a basic component (PU/PS) Automatic shutdown of all pumps in case of overpressure Automatic shutdown of all pumps in case of material shortage Automatic rinsing with a defined number of cycles Two-hand safety control (occupational safety during container change) Pivoting arm in standard design with pneumatic support, 2.5 meters in length / length of manual hoses 2.5 meters

Year of construction: 1992, condition: excellent (used), Mixaco Mixer CM 600 with one container and two trolleys. The Mixaco Mixer was in use for pigments in the chemical industry, is in good condition and ready to use. Built in 1992 You can inspect the Mixaco CM 300 in our warehouse Arnsberg/ Hodshgixzepfx Aamjnr Germany.

Condition: like new (used), Year of construction: 2023, operating hours: 3,700 h, functionality: fully functional, Several robots of various models and manufacturing years are available. 1 unit of IRB 1600 with a payload of 6 kg and a reach of 1.45 m, manufactured in 2017. 2 units of IRB 1600 with a payload of 10 kg and a reach of 1.2 m, manufactured in 2023 (approximately 3500 operating hours). Specifications: 709-1 DeviceNet Master/Slave 888-3 PROFINET Device 608-1 World Zones 611-1 Path Recovery 613-1 Collision Detection 616-1 PC Interface 617-1 FlexPendant Interface 623-1 Multitasking 996-1 Safety Module 1125-1 SafeMove Basic Pendulum Calibration Axis Calibration 1 unit of IRB 1600 with a payload of 10 kg and a reach of 1.45 m, manufactured in 2021 (approximately 5500 operating hours). Specifications: RobotWare_6.12.4008 613-1 Collision Detection 709-1 DeviceNet Master/Slave 617-1 FlexPendant Interface 623-1 Multitasking 611-1 Path Recovery 888-3 PROFINET Device 1125-1 SafeMove Basic 996-1 Safety Module 608-1 World Zones Pendulum Calibration Axis Calibration 🔧 Robot service and refurbishment We provide complete service and refurbishment for industrial robots. ⚙️ Spare parts We sell spare parts and also offer professional repairs and refurbishment. 🤖 Robot sales with warranty Hjdpfoztl I Rjx Aamsnr We supply industrial robots with a warranty for commissioning or a warranty of up to 12 months. 🏭 More than 13 years of experience We have been operating in the market for over 13 years and offer experience, technical know-how, and our own service facilities. Do you need service, a spare part, or a robot? Contact us.

Condition: excellent (used), 508 USED Fritsch Rollfix 50/650 Easy flattener, dough roller. EXTERNAL DIMENSIONS (in cm): - W: 365 - L: 120 - H: 140 - Working width: 65 TECHNICAL DATA: - Power: 1.5 kW Hnodpfszugb Isx Aamor - Power supply: 400V 50Hz - Roller gap: approx. 0.5–42 mm - Belt speed: up to approx. 40 m/min The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: good (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, center height: 228 mm, center width: 1,500 mm, quill stroke: 229 mm, quill diameter: 75 mm, total length: 3,030 mm, total width: 1,200 mm, total height: 2,000 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 20 rpm, overall weight: 2,300 kg, Conventional lathe, center high 228 mm, between centers 1500 mm, bore Ø 76 mm, 16 speed 20 - 1600 rpm, motor 9,3 kw, camlock 8'', dimensions 310x120x200 cm, weight ca. 2300 kgs; equipement: pneumatic chuck SCHUNK ROTA Ø 315 mm, coolant device, 3-jaws chuck Ø 315 mm, several jaws, live center, tool post PARAT WD with toolholders, steady rest, drilling chuck, lamp, manual, cabinet Hjdpfoypud Uex Aamsnr