Used Schleicher Horizontal/Vertikal for sale (6,474)

Condition: used, Year of construction: 1933, functionality: fully functional, overall weight: 5,000 kg, total length: 4,000 mm, total height: 2,000 mm, total width: 2,000 mm, Lithographic press 55 x 75 cm. The machine is in very good mechanical condition, but will definitely require new rollers for printing. All spindles are present and some are still usable. Ideal machine for art studios or lithography workshops to produce high-quality lithographs. Very rare machine. Nwodpfxsx D Tnaj Akueg

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW Nsdpfx Akecdrmmjuswg without control

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Schleicher 3 unit drilling machine after lignum renovation. Machine equipped with upper units 3 pieces .Pneumatic pressure .Working realized by forcing the button unit the rest of the automatic .Choice of units possible each one or all .Speed and depth of drilling the possibility of setting .Machine after major repair .New electricity and driver .Net price vat invoice warranty one year .The machine can be additionally equipped with rulers bumpers pressures and drilling heads of any spacing . Njdpfxjt Ndzns Akujwg

Condition: good (used), Technical Data: Parameter Value Nwodpfx Akexvmqxsusg Saw blade diameter 330 mm Cutting capacity (at 90°) 165 x 115 mm Cutting capacity (at 45°) 115 x 115 mm Swivel range (angles) 0° to 45° Cutting length (min./max.) min. 350 mm / max. 3000 mm Motor power 2 x 2.5 HP (approx. 1.8 kW) Power supply 380 V, 50 Hz Operating pressure 6 bar Weight 615 kg Technical Condition: Used machine, technically fully functional, with signs of use appropriate for its age (year of manufacture: 1977). Please contact me to arrange viewing and testing of the machine. Collection in person or transport possible upon agreement.

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Nedpfx Aexqfwtskuewg Diameter: 2.80m Length: 17.10m

Condition: used, 50 m3 / 50,000 l horizontal steel tank Diameter: 2.50 m Length: 10 m Nwodpextmzxefx Akujg Weight: 16 t The tank is pressurized. Steel thickness: 20 mm / 2 cm Pressure: up to 20 atmospheres Steel cradles (legs) included

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Equipped with a ladder. Nwjdeibh S Hepfx Akuog

Condition: ready for operation (used), Year of construction: 2001, operating hours: 18,500 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller model: CNC OSP 100M, rotational speed (max.): 5,000 rpm, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS Travel range, X-axis: 700 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 700 mm Rotary table/B-axis: indexed in 1° steps, 360 positions Spindle speed: 25 - 5,000 rpm Type of input current: Three-phase Pallet size (2x): 500 mm x 500 mm Table size: 500 mm x 500 mm Table load: 800 kg Distance spindle nose to table surface: 150 mm - 850 mm Tool holder: MAS BT 50 Tool magazine (ATC): 60 positions, chain magazine Tool length max.: 450 mm MACHINE DETAILS Control: CNC OSP 100M Dimensions & Weight Nwsdpfxjy S S U Ds Akueg Dimensions (L x W x H): 5,500 mm x 3,160 mm x 3,300 mm Machine weight: 21,000 kg Spindle hours: 18,500 h EQUIPMENT Chip conveyor Coolant system Pocket filter system for internal cooling Spindle speed, continuously adjustable

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 18275, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Nwsdpey Rmz Aefx Akusg Machine from the production of high-precision components for CNC rotary tables. No contract manufacturing. TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 650 mm High-speed spindle – max. speed: 15,000 rpm Spindle taper: HSK-A63 Internal tool cooling possible Number of tool magazine positions: 120 Circular accuracy: 5 µm MACHINE DETAILS Control unit: Siemens Sinumerik 840D Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Dual pallet changer + storage tower with 6 slots for up to 8 pallets Note: The machine was decommissioned by a qualified electrician and professionally prepared for transport.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 18234, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 15,000 rpm, No reserve price – guaranteed sale to the highest bidder! Machine from the production of high-precision components for CNC rotary tables. No contract manufacturing. TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 650 mm Travel Z-axis: 650 mm High-speed spindle – max. speed: 15,000 rpm Spindle taper: HSK-A63 Through-spindle coolant possible Nwsdpfx Aksy Rmnvjueg Tool magazine capacity: 120 positions Circular accuracy: 5 µm MACHINE DETAILS Control: Siemens Sinumerik 840D Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Double pallet changer Note: The machine was decommissioned by a qualified electrician and professionally prepared for transport.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on schedule in week 30 of 2026! TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600 mm tools: 80 Part accuracy: 0.001° MACHINE DETAILS Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h EQUIPMENT ATC with 320 positions 80 positions for 600 mm tools Balluff writing/reading system NC table Absolute scales in X, Y, and Z Renishaw MP10 measuring probe Tool breakage monitoring Nedsy S T Rtopfx Akuswg MOP tool monitoring 30-bar coolant system Mayfran Consep 2000 chip conveyor

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Nwjdpoxd D Nzefx Akusg

Condition: good (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 8,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Machine Type: CNC Horizontal Machining Centre Year: 2004 Control: OSP-E100M Axes: 4 No. of Pallets: 2 Condition: Good - There is an issue with the pallet changer. Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Nwjdswcd Evspfx Akuog Spindle Speed: 8,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Machine Weight: 10,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 17,500 kg, working width: 1,300 mm, working height: 1,300 mm, working range: 1,300 mm, Amada H1300 Horizontal Bandsaw (1982) Capacity 1300 x 1300mm Power 230 V – 50/60 hz / 400 v – 50hz / 460 v 60hz Nwedpfstv E Hcjx Akuog Blade drive 11 kw Hydraulic drive 3.7 kw Coolant drive 0.4 kw Wire brush drive 0.4 kw Blade size 11380mm x thickness 1.6 x width 65 mm Net weight 17.500 kgs Total power requirement 16 kw Machine Data: Model H1300 Year of Construction 1982 Built in Japan

Condition: ready for operation (used), functionality: fully functional, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, Danobat CP 1211T Large Capacity Bandsaw Cutting Capacity Dia / Square 1100mm Nwedpfxetv Nads Akueg Cutting capacity rectangle 1200mm wide x 1100mm high Fully automatic

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg Nsdpfx Asw U Uh Dekujwg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: repair required (used), Horizontal Plate Freezer Self Contained with built in compressor pack 6 station In cabinet, with doors Gram Compressor Hydraulic pack Condenser Nodpfoy T Icmox Akujwg Controls Unit does need a service/overhaul. Supplied "as is"

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 2,000 mm, filling opening length: 1,020 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, year of last overhaul: 2026, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Nodpoy Uruvsfx Akuswg Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: new, The SBS 255, part of the Horizontal Mitre Cutting Bandsaws category and the Semi-Auto Bandsaw group, is a compact, robust machine designed for efficient machining of small batches. This universal workshop band saw features a one-piece cast-iron saw frame that is torsion-proof and swivels 60° to the right and 45° to the left, allowing for versatile cutting options. With a rigid vise equipped with lateral slide and long guideways in the movable jaw segments, users can achieve precise cuts on various workpiece sizes, thanks to the combination of carbide jaws and adjustable ball bearing guides. The SBS 255 operates quietly, ensuring short machining times and easy handling, which leads to increased productivity. Additionally, it is powered by a strong motor for continuous operation and comes with a high-capacity coolant system. Included with the saw are essential tools like a saw blade, base, pressure gauge, and operator instructions. KNUTH provides the quality assurance you expect, so order online today to enhance your workshop with the SBS 255 Horizontal Mitre Cutting Bandsaw. Nwjdpouyiqdjfx Akuog

Condition: new, The ABS 380 L is a cutting-edge horizontal straight cutting bandsaw from KNUTH, designed for high-performance sawing in the Auto Straight Bandsaw category. This fully automatic machine features a robust dual column frame that ensures superior stability, making it ideal for precisely straight sawing of large and heavy workpieces. The ABS 380 L offers a torsionally rigid steel construction complemented by high-quality linear guides, ensuring durability and accuracy during operation. With an advanced hydraulic saw frame feed design, operators can infinitely adjust the feed speed and cutting pressure for various sawing tasks. Additionally, the hydraulic workpiece clamping and optical detection of workpiece height enhance efficiency by automating crucial processes, substantially reducing operator workload. Standard equipment includes a saw-band, workpiece counter, and a coolant system, providing everything needed for reliable operation. For those seeking robust performance in horizontal straight cutting bandsaws, the ABS 380 L is an excellent choice. You can order online today and experience the exceptional capabilities of the Auto Straight Bandsaw. Nwedpfou E Imhex Akueg

Condition: used, The ABS 325 S NC is a robust and precise addition to the category of Horizontal Mitre Cutting Bandsaws, belonging to the Auto Miter Bandsaw group by KNUTH. This high-performance production band saw features a dual column design that enhances stability and cutting accuracy. The material feed is powered by a controlled servo motor with ball screw drive, offering a remarkable positioning accuracy of ±0.2 mm. Users can easily program and manage operations via the Omron touchscreen controller, which supports up to 30 programs with 50 steps each. For added flexibility, the ABS 325 S NC includes an option for hydraulic bundle clamping, alongside a digital display for easy reading of manually set miter angles. This fully automated saw excels in applications requiring mitre cuts in solid materials, tubes, and profiles, and is designed for high durability in demanding environments. With features like a hydraulic cutting angle clamping and automatic stroke height control, this saw ensures minimal downtime. You can request a quote for the ABS 325 S NC in the category of Horizontal Mitre Cutting Bandsaws and discover why this Auto Miter Bandsaw is a perfect fit for your production needs. Nedpfx Aeyq N Iqokuswg

Condition: new, The HB 460 L is a semi-automatic horizontal band saw in the Horizontal Mitre Cutting Bandsaws category and part of the Semi-Auto Bandsaw product group. Designed for heavy cutting applications, it delivers precise cuts on steel, cast iron, and other materials with its robust dual-column construction and reduced vibrations that enhance accuracy and speed. This advanced model features infinitely variable cutting speeds from 20 to 100 m/min, a powerful, low-maintenance motor, and a standard hydraulic workpiece clamping system to ensure reliability and efficiency. With the HB 460 L, operators benefit from precise saw blade tension adjustments via a pressure gauge, a removable coolant reservoir for easy maintenance, and an optical sensor for automatic stroke height adjustment. The machine’s versatility extends to including miter cutting capabilities with a 45° swiveling vise, making it ideal for both sections and solid materials. For an optimal cutting experience with the Horizontal Mitre Cutting Bandsaws product group, request a quote for the HB 460 L today and see how KNUTH can enhance your machining operations. Nwedpfx Asu Abvdjkuog

Condition: used, total height: 2,500 mm, total length: 3,500 mm, total width: 2,500 mm, Colour: Green Empty weight: 10.000 kg Price: On request - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 11.5 - Centre height [mm]: 700 - Swing over bed [mm]: 1400 - Carriage turning diameter [mm]: 640 - Distance between centres [mm]: 800 - Bed width [mm]: 700 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 240 - Max. spindle speed [rpm]: 110 - Options: Digital readout, Facing lathe, Quick-change tool post - Transport dimensions: 3500mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information Nedpfxjyx Tvij Akujwg VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. Njdpfxsfxygws Akuewg After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, TECHNICAL DETAILS Nsdpfx Aoyk A S Njkujwg Travels & Axes Travel X-axis: 560 mm Travel Y-axis: 560 mm Travel Z-axis: 630 mm B-axis: 1° increment index table Rapid Traverses Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Workpiece Dimensions Maximum workpiece height: 900 mm Maximum workpiece diameter: 630 mm Maximum workpiece weight: 400 kg Spindle & Tools Maximum spindle speed: 14,000 rpm Distance spindle center to pallet surface: 80–640 mm Distance spindle nose to pallet center: 100–730 mm Tool magazine: 60 positions Tool change time: 0.9 s Tool holder: BT 40 Pallets Pallet dimensions: 400 x 400 mm Number of pallets: 2 Pallet change time: 6 s Feed Feed rate X-axis: 50,000 mm/min Feed rate Y-axis: 50,000 mm/min Feed rate Z-axis: 50,000 mm/min Work Table Table width: 400 mm Table length: 400 mm Table load capacity: 400 kg MACHINE DETAILS Control model: MSX-701IV Power consumption: 32.8 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,400 x 2,600 mm Total weight: 9,800 kg Operating Hours Power-on hours: 46,259 h Operating hours: 26,725 h Machining hours: 17,691 h