Used Schnell Idea 12/25 Assembly Machine for sale (83,050)

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 223A011643003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-12 mm Year: 2016 Machine-No.: 223A011643003 Condition: Refurbished Features: Nodjukvgrjpfx Akujwg ⦁ ASLF Anti-Strap-Loss-Function Permanent strap control ⦁ Automatic strap feed ⦁ Strap width 5 - 12 mm, optional ⦁ DAT Direct-Access-Technology Torque-controlled retraction force, adjustable ⦁ Adjustable transport speed ⦁ Machine mobile ⦁ Table height continuously adjustable ⦁ Package flow monitoring Special features: • Right machine (viewed in the direction of conveyance) • EMERGENCY STOP button in the Easy Control control unit • Signal exchange: 2 x mating connector with tool • Additional light barrier for attachment to the front or rear conveyor • Signal exchange: Do not strap the package. To the front-running machine • External button: Do not strap the package • Strap tension dependent on the package height (laser sensor) • Pneumatic package press (600x600) • Double press beam 600 • Feed protection on the table top, inlet side

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 410B010616004, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 410B010616004 Year of manufacture: 2006 Strapping: 5-9 mm, coil core 200 mm, width 190 mm Transport speed: 0.8 m/sec. - Transport height: 850 mm (30 packages/min. with single strapping, 15 packages/min. with parallel strapping) 12-month warranty (excluding: machine control, travelling expenses and wear and tear) Properties / Features: ⦁ Suction ⦁ Reinforced exhaust, with bundle height detection via bundle press (bundle height below 10 mm to min. approx. 3 mm - depends on product) ⦁ Strap scanning ⦁ Strap ejector Nwjdpfx Akjwd I Idsusg ⦁ Strap infeed, automatic ⦁ Strap cutting blade ⦁ Command buttons, additionally opposite operating unit (START/STOP/NOT-OFF) ⦁ Blow gun with spiral hose ⦁ Bundle height-dependent automatic belt tensioning system ⦁ Inlet and outlet timing with complete plug connection, 16-pin (Walther) ⦁ Height adjustment of the feet ⦁ Light barrier attachment at the top ⦁ Mains cable, length 3 m ⦁ Package scanning ⦁ Parcel stops, move away from the parcel when opened ⦁ Parcel press gentle (with laser) ⦁ Plexi protective doors on the side, firmly screwed in place ⦁ Press beam, double ⦁ PLC control with jog dial control panel ⦁ Coil quick-change device ⦁ Cycle-stop interlinking ⦁ Table belt drive, infinitely variable (frequency converter) ⦁Electrics: Connection voltage 1 phase with neutral conductor or 2 phases at 198V, 208V, 218V, 220V - 240V, 390V - 410V, 450V - 500V 50 Hz or 60 Hz - Here set to 400 V - 50 Hz -

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 223A011235001, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235001 Condition: Refurbished Our latest project was the refurbishment of this fully automatic strapping machine SMB CUBE 600x600c from 2012. You might be able to see from the outside and from the price that this CUBE is a second-hand machine, but when you look at the list of spare parts and labour hours used, it becomes clear: this machine has been extensively refurbished to its original condition and is now as good as new; perhaps even a little better. As good as new with the CUPASO refurbishment With our reconditioned used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the SMB CUBE 600x600c offered here. We also offer you our comprehensive service for this refurbished device. In addition to our 12-month guarantee, this includes the long-term supply of consumables, spare parts and technical service. Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). And if you decide quickly, you will receive our exclusive pre-sale discount of 10%. Nwedpfxot Uzv Ts Akuog Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package • External button: Do not strap package • Package height-dependent belt tension (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side

Condition: like new (used), Year of construction: 2022, A Manz hot press is for sale. It is disassembled and stored in our warehouse, and can be inspected ready for connection. It was used in aircraft manufacturing. Nwedpfeyhq Adsx Akueg

Condition: used, air flow quantity . m³/h suction power . kPa power capacity . kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Nedpfxsyqvp Us Akuewg More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2020, An automation machine Infinite Technologies and Robotics (CN) for automated assembly of clips on electroplated chrome trim strips is available. Clips per component: 6, component geometries: 4, pressing force: 100N, pressing force tolerance: +/-10N, positioning tolerance: +/-0.3mm. Sliding tables: 2, sliding table dimensions X/Y/Z: 1180mm/770mm/15mm, sensors: 4. Tool holders: 2, holder dimensions X/Y/Z: 740mm/490mm/190mm, max. holder weight: 20kg. Axis systems: 2, travel X/Y/Z: 800mm/400mm/300mm, max. speed: 250mm/s, spindle pitch: 5mm, payload: 330N. Machine dimensions X/Y/Z: approx. 3700mm/2250mm/2300mm, weight: approx. 3000kg, control: Siemens S7. Including vision system Keyence, sensors Sick and pneumatics SMC. Documentation available. An on site inspection is possible. Nodpfjyrta Tex Akuowg

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-25 concrete block making machine is an excellent solution for plants producing concrete blocks, bricks, paving stones, and bims, offering high efficiency and flexible production capabilities. Developed in line with modern production concepts, this machine can easily produce various products such as paving stones, curb stones, and hollow blocks using different molds thanks to its single-layer structure. Thanks to its scalable facility structure, investors can quickly and economically increase their production capacity according to their needs. The BS-25's fully automatic PLC control system allows a single operator to manage the entire production process. The touchscreen LCD control panel offers the ability to monitor and print production data in real time with its user-friendly interface and advanced reporting system. With its remote access feature, the system can be controlled via LAN or internet connection, allowing for easy detection of potential malfunctions and remote software updates. This smart automation technology ensures consistent quality and maximum production in every shift. BS-25 - Concrete Block Machine Technical Specifications Production Capacity: 110–120 pallets/hour Pallet Size: 1,200 x 980 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.5 m³ Hydraulic Oil Capacity: 500 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Production Capacity in 8 Hours: 10,000 concrete blocks / 25,000 interlock blocks Why Should You Choose the BS-25 Concrete Block Machine? Nsdpfx Akoxp Uureuewg CONSTMACH stands out in the production of concrete block, brick, and paving stone making machines with its reliability, engineering quality, and after-sales support. The BS-25 model reduces your production costs while increasing your capacity with its energy-efficient design, long-lasting components, and smart control system. Each machine is delivered after passing quality control tests and can be customized upon request. For investors seeking high durability, minimal maintenance requirements, and world-class production performance, the BS-25 is a symbol of long-term profitability and reliability. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2026, functionality: fully functional, Retractor EV Pneumatico with Automatic Cable Retractor / Charging Cable Holder Njdpfxoygv Dks Akuswg The Pneumatico Retractor EV is an innovative holder with automatic cable retraction, revolutionizing the charging process for electric vehicles. This device not only makes charging the vehicle easier but also tidies up cable management effortlessly. The retraction unit is available in four models with different load capacities: EV0, EV1, EV2, EV3. What is the Pneumatico Retractor EV used for? The Retractor EV is designed for the management of electric vehicle charging cables. The housing is made of galvanized steel, making it weather-resistant. It features a 180-degree rotating mount that facilitates easy and convenient cable handling. The modern design and powder coating provide a high-quality, aesthetic finish. The extended cable is up to 300 cm long and manufactured from special, high-strength Dyneema fibers that do not damage vehicle bodywork. At the end of the cable, there is a rotating handle to prevent cable twisting. The retraction force can be adjusted using a wrench. Installation of the retraction unit is simple and quick. The suspended cable remains clean, as do the operator's hands. Lifting capacities range from 1.00 kg to 8.00 kg depending on the selected version. Does the Pneumatico EV Retractor fit every charging cable? Yes. The basic clamping range for cable diameters is from 16.5 to 32 mm, and the load capacity of the retractor ranges from 1.00 to 8.00 kg. If the cable diameter differs, we supply a custom cable holder with the required diameter and use a retractor with a higher load capacity. The Pneumatico Retractor EV is the ideal device for both private and commercial use. Pneumatico Cable Retractors – EV Series (EV0 / EV1 / EV2 / EV3) We offer Pneumatico spring-cable retractors in various load capacity ranges – ideal for industrial applications such as cable management and tool balancing. Load capacities / Models: EV0: 1–2.5 kg EV1: 2–4 kg EV2: 4–6 kg EV3: 6–8 kg Cable diameters (available for all EV models): 16.5–18.5 mm 19–20 mm 21–22 mm 22.5–24 mm 24.5–26 mm 26.5–28 mm 28.5–30 mm 30.5–32 mm

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS25 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 25 Mp Number of strokes: 800/min Nodpfx Ajymaduekujwg Diameter for round point: 10 - 75 mm Diameter for folded point: 18 - 100 mm Diameter of reduced section for both point types: Max. 50 mm Feed speed, infinitely variable: 0 - 70 mm/sec

Year of construction: 2017, condition: refurbished (used), Tube pointing machine AVS-25, made by KIESERLING - Initial diameter : 15 - 75 mm - Pointed diameter : 10 - 50 mm - Force : 25 tons - Cycles per minute : 800 - Introduction speed adjustable without steps : 0 – 70 mm/s - Model of introduction duo : R25 - Tools : Rotating hammers Model of introduction duo: R25 Tools: Rotating hammers Nsdpfoymacwjx Akujwg

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 224A022347001, warranty duration: 12 months, frame height: 600 mm, frame width: 800 mm, Equipment: documentation/manual, Band frame for packages max. 800 mm width x 600 mm height Central sealing unit (max. 40 packages/min., depending on back tension and package size) Standard equipment: ⦁ ASLF Anti-Strap-Loss-Function Permanent strap ontrol ⦁ Automatic strap feed ⦁ Strap width 5 - 12 mm, optional ⦁ Mechanical pre-equipment for strong tensioning ⦁ DAT Direct Access Technology Nwedpfx Akeynh Drsuog ⦁ Torque-controlled tensioning force, adjustable ⦁ Adjustable transport speed ⦁ EPP Exact Product Path ⦁ Control unit with touch panel (Smart Touch 4.0) ⦁ Mobile machine ⦁ Table height continuously adjustable ⦁ Table tops, hinged ⦁ Table tops with driven table belts ⦁ Package flow monitoring ⦁ Bobbin scanning ⦁ Signal lights Special equipment ⦁ Roller table 800 mm complete with EPP ⦁ Right-hand machine (viewed in conveyor direction) ⦁ Table extension 450 mm, driven (roller table) ⦁ Electric package press VERO 800x600 DH=500 ⦁ Signal exchange with line control

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Nwodpoh U Dtuefx Akuog Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle plate Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The T-slot table was originally a machine table from a milling machine - 4 T-slots, 16 mm - Metal base with height-adjustable feet - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Nwjdpfx Aowkvi Nokusg Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg good condition

Condition: used, machine/vehicle number: 307264.3, Winding machine Meteor Compact Type 307-01 Winding diameter 80 mm x 350 mm Wire thickness 0.15 - 0.5 mm Nwjdpoylnb Eefx Akujg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 66N-1507, Micafil Winding Machine OFAnII No. 402 No. 66 N - 1507 Wire diameter 0.006 - 1.5 mm Winding range 80 x 500 mm Tailstock missing Micafil Winding Machine OFAnII No. 403 No. 66 N 1504 Nwsdsylmhkjpfx Akuog Wire diameter 0.006 - 1.5 mm Winding range 80 x 500 mm Winding range

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,500 kg, We are offering this new RUBIX assembly machine, year of manufacture 2025. I am a professional in the industrial sector, offering my services as an industrial premises developer. During a relocation and the construction of a new platform, my client RUBIX transferred to me some new, packaged hydraulic and pneumatic equipment after discontinuing this activity from their range of industrial equipment supply. Therefore, I am offering for sale a batch of equipment as listed in the attached document: hydraulic pumps, hoses, and fittings. Nwjdpfsyc Eudex Akuog I can provide a sales invoice and offer an attractive price for the lot, which is valued at €43,000 (excluding VAT). I remain available to discuss with you according to your interests. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Njdpfewric Esx Akuswg

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Ready to ship worldwide Njdpew D Ev Eofx Akuewg More pictures and videos available upon request

Condition: excellent (used), functionality: fully functional, Gade Bending Machine 3100 X 25 Ton Mod. 30/25 Used Machine Internal Code: Svr 317 Nodpowrrhwofx Akuowg

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Nwsdjidchcopfx Akujg Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 5.500 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Nwsdpeidchgofx Akusg Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 5.600 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 4.450 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Nsdpfx Aoidcg Askuewg material thickness: approx. 2,00 mm

Condition: used, Year of construction: 2015, operating hours: 35,052 h, Operational machine! Modular Type Multi - Purpose Automated Fabrication Machine sFAB50. Hours worked: 35052 The component feeders: Radial tape feeder pitch 12,7 mm - 3 pcs. Horizontal stacked stick feeder - 1 pc. The ball screw of X-axis may need to be replaced in the near future. Ask for specifications! Nwedpfx Asx Nh Rpokuog

Condition: excellent (used), Filling machine TM Industry Belgium M 25 Nwodpfxsiu H Uvo Akuog for filling liquids Filling range 0,5-30kg Very good condition, directly from production!!!

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,033 h, load capacity: 1,200 kg, lifting height: 4,350 mm, free lift: 1,462 mm, fuel type: electric, mast type: triplex, construction height: 1,940 mm, fork length: 1,150 mm, drive type: Elektro, High-lift truck Load center: 600 Mast type: Triplex Condition: Refurbished without warranty Technical condition: Good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 200Ah Battery manufacturer: Batronics Battery type: PzS Battery year: 2025 Battery condition: 80 - 100% Description: Delivery with new FEM 4.004 inspection, overhauled and newly painted. For further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We will gladly provide attractive offers for leasing & financing as well as affordable delivery options. We also accept Linde equipment as trade-in – even if you do not purchase a machine from us. The stated operating hours were read at the date of entry. Subject to prior sale, changes, and errors. Nwedeycy N Aopfx Akujg Full free lift,