Used Schwab Schwab Carousel for sale (162)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Thorwesten PBZ3 machining center for optimized processing of profiles. Nwjdpfx Aozfvf Rscfsh The tool carousel enables variable angles for all tools. All machining operations – milling, drilling, and screwing – are performed in a single pass. A dynamic screwdriver reduces processing times.

Condition: excellent (used), Here we offer you a Kuka robot with a control unit. Kuka robot VKR 16-2 R1610 Control unit VKRC4-SC5 Kuka smartPAD handheld programming device The robot comes from a school and research department. Hour meter: 226.25 hours Axis data: Range of motion: A1 ±185° A2 -185° / 65° A3 -138° / 175° A4 ±350° A5 ±130° A6 ±350° Speed at nominal load A1 200 °/s A2 175 °/s A3 190 °/s A4 430 °/s A5 430 °/s A6 630 °/s Technical data: Maximum reach 1612 mm Nwodpfx Acjzdiudofeh Maximum payload 20 kg Nominal payload 16 kg Nominal additional load carousel / swivel / arm 0 kg / 0 kg / 10 kg Positional repeatability (ISO 9283) ± 0.04 mm Number of axes 6 Mounting position: Floor; Ceiling; Wall; Any angle Mounting area 430.5 mm x 370 mm Weight approx. 245 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Year of construction: 2020, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VF353, The "CeBeCo®" TROWAMAT® XL is suitable for cleaning wash items whose contaminants can be removed by spraying with detergent under pressure. The inserted basket, filled with wash items, is evenly passed by the nozzles positioned above and below, via a carousel wheel. Additionally, the wash items are sprayed by a nozzle system in the door and at the rear of the unit. Thanks to the high spray pressure and low rotation speed, a consistent cleaning result is achieved. TECHNICAL DATA Type: "CeBeCo®" TROWAMAT "XL" Size 40100/40 WST Drawing No. 3314-20 Tank: Approx. 3 mm thick stainless steel sheet 1.4301 Insulation: 25 mm mineral wool / Terodem Cladding: 1 mm galvanized steel sheet Usable dimensions: approx. 400 mm x 1,000 mm x 400 mm (height) Load capacity: max. 100 kg, with evenly distributed load Overall dimensions: approx. 2,700 mm x 1,825 mm x 2,530 mm (height) without roller conveyor Entry height: approx. 1240 mm Detergent: service water, aqueous, pH 7 - 11, max. +70°C, non-foaming, concentration max. 5% Detergent tank volume: approx. 460 L Rinse agent: aqueous, pH 7 - 11, max. +70°C, non-foaming, concentration max. 5% Rinse agent tank volume: approx. 240 L The offer includes roller conveyor and washing baskets. Nwjdpfx Aoyr Dkcscfjh For further information, please contact us.

Condition: excellent (used), Year of construction: 1987, Carousel lathe SCHIESS FRORIEP - DV DF DZ DKE 1 x set off 4 jaws 410 x 330 x 200 mm MACH-ID 6692 Nwsdpfozc Iavsx Acfjh Make: SCHIESS FRORIEP Type: DV DF DZ DKE Year: 1987 set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE Jaw width 90 mm Jaw height 75 mm Hole to hole jump 125 mm Length:1200mm Width:800mm Height:400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 161/93, Rye 40 SM Speedmax is a heavy-duty, automatic rotary shaper / rotary profile milling machine. It is designed for high-volume production and profiling of solid wood and wood-based components. The British manufacturer, Rye Machinery Limited, was a renowned supplier of specialized machinery for the furniture and joinery industries. Electrical Specifications • Supply Volts: 380 V AC (three-phase power supply) Nsdjzfh Svjpfx Acfswh • Control Volts: 110 / 240 V AC • Auxiliary Volts: F-215 / A15-180 • Frequency: 50 Hz • Phases: 3 • Full Load Current (F.L.C. Amps): 49.0 A • Machine No.: 181-93 • Wiring Diagram: A3-ER80/031 Technical and Functional Overview The Speedmax series of rotary shapers was engineered to minimize setup times and deliver maximum throughput for profiled components (e.g., chair parts, table tops, furniture fronts): • Rotary Table Design: Features a central, continuously rotating worktable. The operator can safely load and unload components on one side while the shaping heads machine the material on the opposite side. • Machining Heads: Equipped with pneumatic, heavy-duty shaping spindles that follow a master template to accurately reproduce complex, curved profiles. • Safety & Enclosure: The machine includes a comprehensive acoustic enclosure and safety guarding. This protects the operator from chips, dust, and moving spindles while significantly reducing workshop noise. • Dust Extraction: Outfitted with dedicated extraction hoods integrated near the work heads for efficient chip removal.

Condition: used, machine/vehicle number: 169/79, R80SM is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England) Details of the R80SM model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80 - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). Nedpfx Acozfh Eiofowh - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: used, R80E MC is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England), manufactured in 1983 (serial number 112/83). Details of the R80E MC model Nodpoyrn Rasfx Acfswh - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Year of manufacture: 1983 (112/83 – 112th machine in 1983 or December 1983). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80/R80E - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: used, machine/vehicle number: 241/95, R80SM is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England) Nedpfxjyrphme Acfewh Details of the R80SM model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80 - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, feed length X-axis: 450 mm, feed length Y-axis: 400 mm, feed length Z-axis: 300 mm, nominal power (apparent): 12 kVA, controller manufacturer: Fanuc, controller model: Oi-MC, workpiece weight (max.): 200 kg, total height: 2,460 mm, total length: 2,100 mm, total width: 1,980 mm, table width: 320 mm, table length: 720 mm, table load: 200 kg, overall weight: 2,000 kg, spindle speed (max.): 10,000 rpm, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 12, tool diameter: 75 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 🟦 2007 Dugard Eagle 450XP CNC Vertical Machining Centre | Fanuc Oi-MC | 12 ATC 🔧 Machine Details Manufacturer: Dugard Model: Eagle 450XP Year: 2007 Type: CNC Vertical Machining Centre (VMC) Nsdpoy Ittmsfx Acfjwh Control: Fanuc Series Oi-MC Condition: Good 💡 Description 2007 Dugard Eagle 450XP CNC Vertical Machining Centre equipped with Fanuc Oi-MC control, offering reliable and precise machining performance. This compact VMC is ideal for precision engineering, toolmaking, and general machining applications, combining high speed, accuracy, and a small footprint. The 12-station tool changer and rigid tapping make it a versatile and efficient machine for a wide range of jobs. ⚙️ Technical Specifications Table Size: 700 x 320 mm Max Table Load: 200 kg 📏 Travels X Axis: 450 mm Y Axis: 400 mm Z Axis: 300 mm ⚡ Spindle Spindle Speed: 10,000 rpm Spindle Taper: BT40 🔄 Tool Changer Type: Carousel ATC Stations: 12 Max Tool Diameter: 75 mm Max Tool Weight: 6 kg Tool Change Time: 6 seconds ⚙️ General Data Machine Size (L x W x H): 1980 x 2100 x 2460 mm (approx) Weight: 2,000 kg 🧠 Features Compact high-speed machining centre Rigid tapping capability Fully enclosed splash guarding Heat exchanger for electrical cabinet Reliable Fanuc CNC control (industry standard) Compact footprint – ideal for smaller workshops Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: M&R Sportsman EX 8/6 textile carousel, built in 2013 Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Pallets: Textile - 40 x 55 cm, 8 pieces Pockets - 30 x 40 cm, 8 pieces Nsdpfx Aov Iy H Iscfewh Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Conveyor width: 91 cm Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Weight: 817kg Power supply: 380V Price negotiable

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, We offer for sale a professional manual screen printing press: M&R Chameleon, 10 colors / 4 stations, year of manufacture: 2007. This is a legendary model, recognized as the most precise and stable carousel press in the world. The machine is in very good technical and visual condition and is ready for immediate operation in a professional print shop. Key specifications and advantages: • Configuration: 10 colors / 4 stations (enables printing of very complex designs on a small area). • Duo-Deck™ system: Unique dual-level construction allowing operation of 10 colors while maintaining compact dimensions. Njdpfxsy E Ay Do Acfewh • Side Clamps: Provide exceptional screen stability and eliminate vibration during printing. • Air Locks: Pneumatic locking system enabling quick and tool-free frame setup and replacement. • Micro-registration: Precise registration along three axes, maintaining accuracy even over very long runs. • Origin: M&R brand – guarantee of spare parts availability and service support. This press is perfectly suited for high-end quality printing, pattern creation (sampling) for automatics, or as the main machine in a boutique print shop focused on quality.

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: Fagor, controller model: 8055 iA/MC, total height: 2,500 mm, total length: 2,200 mm, total width: 2,100 mm, table width: 410 mm, table height: 820 mm, table length: 900 mm, table load: 350 kg, overall weight: 3,630 kg, spindle speed (max.): 8,000 rpm, coolant supply: 2.7 bar, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 100 mm, tool weight: 8,000 g, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Used machining center – Micromill MM 430 - Control system: Fagor - Spindle – 8000 rpm – mount DIN 69871 40 ISO - Semi-automatic with manual feed control - Automatic with cycle function - DIN ISO programming - 10.4" color display - Large memory for created programs - Motorized spiral chip conveyor system - Tool changer (carousel) for 16 tools - Linear roller guides in all 3 axes - Automatic central lubrication - Spindle orientation - Work table, precision-ground with 4 T-slots - Precision-ground ball screws in all 3 axes - Complete machine enclosure with 2 front sliding doors - Coolant system with chip flushing system - Telescopic guide rail cover for all 3 axes - Low-voltage system - Oil separator - Rigid tapping - Servo motors (direct drive) for feeds - Electronic handwheel for all 3 axes - Ethernet connection - Spindle blow-out function - Work area lighting Nwjdpfx Acszc Htusfoh The machine can be inspected under power at any time.

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 460 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 8,000 rpm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,500 mm, total width: 2,100 mm, total length: 2,200 mm, table width: 410 mm, table length: 900 mm, table height: 820 mm, type of input current: three-phase, table load: 350 kg, overall weight: 3,630 kg, controller manufacturer: Fagor, controller model: 8055 iA/MC, coolant supply: 2.7 bar, tool diameter: 100 mm, tool length: 300 mm, tool weight: 8,000 g, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, Used machining center – Micromill MM 430 - Control system: Fagor - Spindle – 8000 rpm – mount DIN 69871 40 ISO - Semi-automatic with manual feed control - Automatic with cycle function - DIN ISO programming - 10.4" color display - Large memory for created programs - Motorized spiral chip conveyor system - Tool changer (carousel) for 16 tools - Linear roller guides in all 3 axes Nwjdszcyivopfx Acfsh - Automatic central lubrication - Spindle orientation - Work table, precision-ground with 4 T-slots - Precision-ground ball screws in all 3 axes - Complete machine enclosure with 2 front sliding doors - Coolant system with chip flushing system - Telescopic guide rail cover for all 3 axes - Low-voltage system - Oil separator - Rigid tapping - Servo motors (direct drive) for feeds - Electronic handwheel for all 3 axes - Ethernet connection - Spindle blow-out function - Work area lighting The machine can be inspected under power at any time.

Condition: good (used), functionality: fully functional, Comec FGS-2T-IE Carousel Milling Machine Number of units: 2 Unit configuration: External milling unit: 11 kW Internal milling unit: 7.5 kW Pneumatic central material clamping system Operation with templates Rotary table speed adjustable via a variable frequency drive Nedpfx Aozd Dklecfjwh Machine weight: 2000 kg Machine dimensions: 180x180x220 cm (H)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area: 2700 x 1250 mm Z-axis travel: 160 mm Rotary axis: C-axis Spindle motor power: 8.5 kW Spindle speed: 24,000 rpm Tool changer (carousel): 8 tools (auxiliary magazine) Main tool magazine: 10 tools Saw unit along X and Y axes Vertical drills along X-axis: 8 pcs Vertical drills along Y-axis: 5 pcs Horizontal drills along X-axis: 4 pcs Horizontal drills along Y-axis: 4 pcs Tool holder type: HSK 63 Central lubrication pump Nwsdpfjwp R Eijx Acfjh Vacuum raster table Edge milling unit along X-axis Year of manufacture: 2011

Condition: new, max. workpiece length 5150 mm profile spindle 1 Stück main drive 16 kW Control Beckhoff CNC Number of axles 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Nedpjd Ih Htofx Acfowh Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm; Y = 1500 mm; Z = 200 mm - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid spacing - linear 4-fold tool magazine - Special clamps for straight window and door parts - special clamps for round window and door elements - 24 pcs. Vacuum clamps for internal installation - Vacuum pump - Chip conveyor belt - extensive design software for interior design, panel processing as well as f. Windows and doors: Masterwork: 2D-Wop for standard application panel processing / interior fitting with Additional function Lamello connection Master 3D Level 2: for more complex edits, optionally also expandable for 5-axis fully interpolating MasterWindow: Integrated window and door design software i.e. Machine does not have to (but of course) with external industry software be controlled. VIDEO shows production of 4 sash parts in one clamping Complete machining including glazing bead production. Corner joint hybrid. Of course, all common corner joints on the machine producible. OTHER OPTIONS ON REQUEST! We are also happy to offer you suitable tools for the machine. (ording to the manufacturer - without guarantee!)

Condition: good (used), Year of construction: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and a tool magazine. Features include a CRT screen and a classic push-button keyboard. 3. Electrical parameters (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not specified, but typically Fanuc 110/220 V → transformer) Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine construction Vertical CNC machining center (milling machine) with a fully enclosed housing. Worktable with grid of holes for mounting workpieces. Carousel tool magazine (visible in the photo) – most often 12, 20, or 24 tools (depending on version). Automatic tool changer (ATC). Z-axis operates vertically (guideway assembly and telescopic way covers visible). 5. Typical technical data (for Chiron FZ 12/15 machines from this period) (values may differ depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500 – 700 / 400 / 400 mm Table surface: 800 × 400 mm (example) Table load: 200 – 300 kg Spindle speed: 20 – 6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5 – 15 kW (depending on version) Tool magazine: 12 – 24 tools Positioning accuracy: ±0.005 mm Rapid traverse: 30 m/min (X/Y/Z axes) 6. Application Metalworking (steel, aluminum, cast iron, light alloys). 📌 General information: • Manufacturer: CHIRON, Germany • Type: CNC machining center • Control: as seen in the photo (Fanuc Series 0-M) • Automatic tool changer • Heavy-duty worktable with workpiece clamping options • Solid industrial construction 📌 Machine condition: • Used machine, in good condition • Regularly serviced Njdpfx Asw Uab Aocfowh • Shows normal signs of use • Fully functional 📌 Application: • High-precision milling • Machining of metal components • Single-part and batch production

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Nedpfxswty H De Acfowh Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2007, condition: good (used), Sandwich vending machine Manufacturer: DTVendings Type: BGT Exclusive patented plate system that offers the most professional results, the crunchiest and most delicious sandwich or sandwich. Nwjdpfxefny D Ne Acfjh Two stainless steel carousels of 60 units (sandwiches) and another of 40 (snacks). Four product selections (a single preselected unit). Independent roasting times. Ideal service time of between 60 and 90 seconds for sandwich, 90 and 120 seconds for snacks. Suitable products: sandwiches, folded pizzas, hamburgers, baguette bread sandwiches, ciabatta, even frankfurts. - Dimensions: 1850x995x960 mm - Weight: 375 Kg - Power: 220 V. 50 Hz - Power: 1.5 Kw - Capacity: 100 - Protocol: executive - Max consumption: 1.5 Kw - Average consumption: 0.9 Kw

Condition: used, Rotary labeling machine, modernized in 2008 with a three-head self-adhesive labeling system. Manufacturer: PE Labellers Model: Universal 8T 3S 3E Capacity: up to 4000 - 7000 bottles/hour Nwedpfx Acjzbyucsfsh Carousel: 8-station Configuration: 2 x UNILOGO S7 heads for self-adhesive labels (e.g., front + back) 1 x COLLAMAT 6610 head for applying labels, e.g., neck labels Original technical documentation. Technical condition: used machine, condition as shown in the pictures.

Condition: used, Year of construction: 2000, KOSME Extra Fix 16T rotary labelling machine for labelling bottles or other oval containers. Manufacturer: KOSME Model: Extra FIX 16T 1056 |S3 E2 + SL Year of manufacture: 2000 Capacity: up to 9,000 bottles/h Carousel: 16 stations Equipped with three cold glue labelling heads (front, back, and neck) Original electrical documentation. Technical condition: used machine, condition as shown in the photos. Njdjywchljpfx Acfowh

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, For sale: M&R Sportsman EM 1210 screen printing carousel for textile printing. The machine is in working condition, has been in our facility since new, and has low usage (470,000 prints). In other listings, we offer various textile printing accessories: M&R Sprint M2000 gas dryer, flash cure units, 80 Newman-roller screen frames, Trilock rapid registration system, and much more. Nwsdpfxexfkm Ne Acfsh

Condition: excellent (used), Complete screen printing line with all this included : CAROUSEL PRESS , CONVEYOR DRYER , FLASH CURE UNIT , AIR COMPRESSOR , and 200 ALUMINUM FRAMES . Suitable for professional textile printing and high-volume production. M&R’s Sportsman EX automatic textile presses offer exceptional value and quality at an amazingly affordable price. Sportsman EX 1618 is available in 6, 8, and 10-color models with a maximum image area of 41 x 46 cm (16" x 18"). Sportsman EX 2020 is available in 6, 8, 10, and 12-color models with a maximum image area of 51 x 51 cm (20" x 20"). Nwedpfx Aezcuztecfeh

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Ideal for a new start on Screen Printing Art studio Artists Nodoxwnw Aspfx Acfswh The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER ALL ARE NEW , OUT OF THEIR BOXES.

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide Nodpfx Acsuc Sw Aofswh strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics