Used Scm Fs 41 Elite for sale (5,531)

Condition: new, power: 368 kW (500.34 HP), axle configuration: 6x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (by phone). Iveco AS260S50Y/FS CM 6x2 BDF Swap Body Chassis Djdpfx Asyhyh Hjd Nsut Axle configuration: 6x2P, 3 axles, trailing axle. Cab type: AS MY. Emission level: Europe. Engine: Cursor 13, 500 HP, Euro VIe. Transmission: 12-speed HiTroniX, automated. Permissible gross weight: 26 t. Drive axle variant: SR, single reduction, single axle. Full air suspension. Disc brakes. Steered trailing axle, single tires. Vehicle variant: Container chassis CM. Vehicle set-up: ON. Wheelbase: 4,800 mm. Model year: 2024. Engine speed: 1,650 rpm. Emission standard: EURO VI E. Tires: 315/70R22.5. Speed limiter: 90 km/h. Electrically operated roof hatch (transparent with MLL high roof). Standard black front grille. Manually operated cab tilt. Mirror cams with cover on AS. FHS in vehicle color. Front underrun protection for chassis with a gross weight over 7,490 kg. Plastic bumper. AS high roof cab. Electronic immobilizer and 2nd vehicle key. Dashboard design: plastic with black trim. COC: EC whole-vehicle type approval. Digital tachograph 4.1. Air compressor: 2-cyl., 630 ccm, with integrated clutch, demand controlled. Smart generator 2880 W (24V x 120A), demand controlled. SR-SOLO LIGHT 17x. Rear shock absorbers. Weight variants: front axle 8,000 kg / rear axle 11,500 kg (technically possible: 12,000 kg) / trailing axle 7,500 kg (technically possible: 8,000 kg). Standard overall train brake. Front axle stabilizer. Standard applications. Exhaust pipe outlet to the left. Air filter unit under cab. Lift control for trailing or leading axle (TX/P). Ride height with 2 settings. Rear underrun protection omitted. Trailer version for use with continuous braking system. Rear crossmember, D-value: 130 kN. Trailer socket for 24 volt operation, 15-pin. Rear axle ratio: i = 2.31. Connectivity box 4G incl. TCO service contract. Engine idle shutdown. Tire pressure monitoring system (TPMS), internal sensors. VDI interface for telematics services, version 4.0. Infotainment 10" TFT display. Gearbox software ECO-Roll (coasting function). GPS cruise control Hi-Cruise. Drowsiness warning system (Driver Drowsiness Attention Warning). Warning triangle compliant with ECE-27 directive. Hill start assist (Hill Holder) for easy hill starts. Electronic Stability Program (ESP). Reversing camera monitoring system. Blind spot monitoring system (BSIS) on the right. Intelligent Speed Assistant (ISA). Front area monitoring (MOIS). Emergency brake assist (AEBS). Pre-installation for alcohol interlock (ALC) with cable. NOISE ECE 51/03. Standard EU vehicle width. ECAS air suspension with 2 sensors. Speedline aluminum wheels, SLT. Plastic parts of the cab painted in cab color. Left and right luggage compartments. Transparent sun visor mounted outside on cab roof. Additional diesel/water heater, 4 kW. Fully automatic air conditioning in combination with stationary air conditioning. Standard refrigerator and storage box. Leather steering wheel. With curtains at the bed. Signal horn behind bumper (compressed air). Foldable table in passenger area. One-piece lower bed, firmness: hard. Upper bed with continuous mattress. Ashtray in center console. Electrical pre-installation for tail lift operation, ...

Condition: used, Year of construction: 2014, operating hours: 7,080 h, Tel.: call (Contact · Telephone · Mobile · WhatsApp) * Kubota KX 41 - 3 V * Mini excavator * Kubota engine, * Model D902-E3 or D902BH etc. * 3 cylinders * Displacement: 898 cc * Power: 12.7 kW * 17 hp * with quick coupler * 2 digging buckets * 1 ditch cleaning bucket * 1 hydraulic hammer Dsdpfx Ajwu Rrtjd Neut * KM 100 * Adjustable width of rubber tracks * Operating hours: 7080 * Year of manufacture: 2014 * Net price * All information provided without guarantee

Condition: used, Nikmann FS 41N planer and thicknesser - Planing width: 41 cm Dsdpfx Adsya Drvo Nsut - Shaft with 4 knives - 2 table rollers - Motor with brake Machine in very good, excellent condition.

Condition: new, Siemens 6SL3120-1TE15-0AD0 Single Motor Module 5A SN: T-R16252841 FS: B, unused, in sealed original packaging, 100% functional, scope of delivery as per photos. Duodpfex Dxgzjx Ad Njt

Condition: used, mileage: 772,000 km, power: 260 kW (353.50 HP), first registration: 12/2010, fuel type: diesel, number of seats: 41, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Year of construction: 2010, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Used vehicle Seats: 41, standing places: 44, stroller/wheelchair space: 1 Priority display inside and outside Interior/seating condition: Very well maintained o Class O2 approval Djdpfjw Nz Uyjx Ad Neut o Automatic transmission o Lift-lowering system o Air conditioning o Radio o CD player o Door I double-wide o Door II double-wide o Stroller/wheelchair space o Destination display front, side, rear o Passenger signal system o Transit seating o High-strength seat covers o Microphone o Retarder o Auxiliary heater o Ventilation duct without nozzles o Infection protection screen for driver station

Condition: new, Year of construction: 2025, Working width: 410 mm Planer block: Tersa knives Number of knives: 4 Planer table length: 2000 mm Planer stop angle adjustable: yes, 45° to 90° Maximum thickness throughput of thicknesser: 230 mm Thicknesser table height adjustment: handwheel Planer thickness display: mechanical counter Feed speed: 6 / 12 m/min Feed roller: steel Extraction roller: steel Pressure beam: yes Table rollers: no Motor power: 5 kW Dusdpfjhpl Spex Ad Nst Motor brake: yes, automatic Extraction connection: 120 mm Machine length: 2000 mm Machine width: 750 mm Weight: 430 kg

Condition: repair required (used), Year of construction: 2014, machine/vehicle number: AA2/002546, number of slots in tool magazine: 24, overall weight: 6,600 kg, table length: 5,200 mm, table width: 1,300 mm, TECHNICAL DETAILS Table length: 5,200 mm Table width: 1,300 mm Number of milling spindles: 1 Type of milling table: Beam table Tool changer positions: 24 MACHINE DETAILS Voltage: 400 V Dedpfx Asy Nybted Nsut Current consumption: 64 A Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Net weight: 6,600 kg Transport packages: 1 EQUIPMENT Drilling tool Vacuum pump Tools Becker Vtlf 250 vacuum pump: - Year of manufacture: 2008 - Main motor power: 5.5 kW - Connection diameter: 70 mm - Oil-free: Yes Note: The machine requires repair. There is an issue with the CAN bus system.

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AHH/157/00, functionality: fully functional, total length: 12,500 mm, total width: 2,400 mm, overall weight: 4,000 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit type: Pre-milling unit 2. Unit type: Glue application unit 3. Unit type: Pressure rollers 4. Unit type: End trimming unit 5. Unit type: Rough milling unit 6. Unit type: Corner rounding unit 7. Unit type: Radius scraping unit 8. Unit type: Flat scraping unit 9. Unit type: Brushing unit MACHINE DETAILS Voltage: 400 V Dsdpfx Aey Nxrded Nout Current consumption: 36 A Fuse: 63 A Power: 14.4 kW Dimensions & Weight Dimensions (L x W x H): 12,500 x 2,400 x 1,900 mm Weight: 4,000 kg EQUIPMENT Tools CE marking

Condition: used, machine/vehicle number: 008407, X axis working area: 6700 mm Y axis working area: 1520 mm Working Table: Pod and Rail Dujdpfxeycdaxo Ad Nst Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 48

Condition: used, machine/vehicle number: 008471, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Duodpfx Asywaf Ujd Njt Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 008473, X axis working area: 4900 mm Y axis working area: 1680 mm Working Table: Pod and Rail Djdpfxeywaf Is Ad Nsut Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15 Dodpjx A E Tfofx Ad Njut

Condition: used, machine/vehicle number: 008108, Max width workable: 1050 mm Max length workable: 2400 mm Dodpfx Adjw Iddue Nsut Max height workable: 250 mm

Condition: used, machine/vehicle number: 008132, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Dusdew Idc Repfx Ad Not

Condition: used, Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s Dujdpfxey I Srzj Ad Nst - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: ready for operation (used), Year of construction: 2001, CNC twin table ERGON CNC Maskin SCM Type:Ergon Serie no:AA1/012348 Year:2001 CNC machine SCM ERGON Program NUM PC, and CAD ALIPA CAM Dsdpfx Adsn Hx Tls Neut 2 work tables simultaneoulsy or single work 2 tool magazin/too lchange each 12 holders 2 electro spindles each 11 kw, 18000rpm who can work in pair (DUOSET) independence Z axe stroke Tool holder HSK-63 1 drillbox 18 spindles Toolchange magazin 2x12 places Angular head Manual/instruction, pneumatic, electric diagram in severaL languages on CD Technical info: Control, program NUM-PC, CAD Alpha CAM Axis stroke X-Y-Z 4500-1740x-300mm Work tables 2 pcs each 2160x1520mm electyro spindles/routers DUOSET 2x11kw, 18000rpmwho can work in pair Vertical stroke of 2 independent Z axis Syncron electronic floating head 2 carousel toolholders for change each 12 pcs HSK 63 cone Vector axe Vacuumpump 90m3/h F18-drillbox 18 spindles Power 400 volt, 50 Hz, 3 phase Dimension set up approx:7460x5500mm X-x Weight 7000 kg Stock no:2001650BXA Price: 200000 SEK

Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer. SCM Gabbiani P80 Panel Saw – Year 2021 – 4300 x 4300 mm Duedpfxeylp S Ej Ad Nst For sale is a state-of-the-art SCM Gabbiani P80 panel saw, manufactured in 2021 and in excellent condition. The machine was used in an active carpentry workshop and impresses with its precision, speed, and high reliability in daily operations. Technical Specifications: Cutting length: 4300 mm Cutting width: 4300 mm (large version) Cutting height / blade protrusion: 80 mm Main saw blade diameter: Ø 340 – 370 mm Scoring saw blade diameter: Ø 200 mm Main saw blade speed: approx. 4,650 rpm Scoring blade speed: approx. 5,850 rpm Drive & Power: Main motor: approx. 7.5 – 15 kW (depending on configuration) Scoring unit: approx. 1.3 – 1.5 kW Total connected load: approx. 12 – 15 kW Voltage: 400 V / 50 Hz Speeds: Saw carriage: 6 – 60 m/min (stepless) Pusher speed: up to 60 m/min Pneumatics & Extraction: Compressed air requirement: approx. 300 NL/min / 7 bar Extraction capacity: approx. 2,200 – 2,400 m³/h Extraction ports: 4 x 120 mm Features & Equipment: Air flotation tables for easy handling of large panels Floating clamps for precise cutting Scoring unit for chip-free cuts PC/PLC control (Maestro system possible) Robust industrial design for high workload High repeatability and cutting quality Material suitability: Suitable for: Chipboard MDF / HDF Multiplex / plywood Coated panel materials The machine is fully operational and ready for use. Viewing possible anytime by appointment. Location: Germany If you are interested, please get in touch – further photos, videos, or detailed information are available upon request. Dismantling and delivery can be arranged at additional cost.

Condition: excellent (used), Year of construction: 2006, SCM Z30 CNC Machining Center – Year of Manufacture 2006 – Fully Equipped – On Behalf of Customer For sale is an SCM Z30 CNC machining center from the year 2006. The machine is offered on behalf of a customer and was in operation in a carpentry workshop until recently. The SCM Z30 is a proven and robust CNC machine for furniture production and interior fittings, making it ideal for cost-effective manufacturing in everyday use. Technical Data: Manufacturer: SCM Model: Z30 Year of manufacture: 2006 Travel X-axis: approx. 3000 mm Travel Y-axis: approx. 1300 mm Travel Z-axis: approx. 150 mm Working area: approx. 3000 x 1300 mm Unit / Spindle: Main spindle: approx. 7.5 kW Dsdpoyl Numofx Ad Neut Speed: up to 18,000 rpm Equipment: Console table with vacuum system (pod and rail system) Automatic tool changer – fully equipped Integrated drilling unit CNC control (SCM) Rugged industrial build Applications: Furniture manufacturing Interior fitting Panel processing Single-item and series production Condition: Machine was in use until recently Fully functional Special features: Sale on behalf of customer Photos and videos available Inspection possible by arrangement Location: Germany If you are interested, please get in touch – we will be happy to send you further information, photos, and videos. Location: Ostfriesland region

Condition: used, Year of construction: 2006, Empty weight: 4.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. Dodpfx Adsx Hfiko Nsut If you have any questions, feel free to contact us! - Machine available from: 2026-05-25 - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 11 - - C-axis present: Yes - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - System/software: Xilog plus - Safety feature: Safety mat - Vacuum pump present: Yes - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor, Manual control - Table length [mm]: 3050 - Table width [mm]: 1240 - Z-axis working range [mm]: 200 - X-axis maximum stroke [mm]: 3500 - Y-axis maximum stroke [mm]: 1815 - Z-axis maximum stroke [mm]: 440 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, input voltage: 230 V, type of input current: three-phase, working height: 150 mm, We offer this very well-maintained SCM Multiflex C window and door machining center, year of manufacture 1995. Purchase date: June 1995 Tenoning carriage power: 15 hp Profiling spindle power: 10 hp each Tenoning spindle height: 320 mm Profiling spindle height: 320 mm Electrical connection: 3x230 V Glazing bead recovery system Duodpfxsyvhnus Ad Net The machine is still in very good working order. It has had only one owner throughout all these years, used exclusively in a family carpentry workshop (father and son). Therefore, the machine is certainly not worn out. Reason for sale is the modernization of the machinery fleet. A new SCM corner joint machine has been acquired. The machine remains fully operational and can be inspected and tested until June. All features and functions are still intact. Sold without tooling (cutters).

Condition: used, Year of construction: 2019, machine/vehicle number: MR002728, Used: edge banding machine for applying edge band and solid strips up to a thickness of 5mm. Equipped with a combined milling unit for longitudinal and cross edges. Machine features include pre-milling unit, end trimming operations, and an additional glue pot. The machine comes with the following options: - Radius scraper unit - Brush unit - Glue scraper unit - Quick-change system for glue tank - Spare glue tank Technical specifications: - Minimum edge band thickness: 0.4 mm - Maximum edge band thickness: 3 mm - Maximum strip thickness: 5 mm - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Minimum panel length: 120 mm - Minimum panel width: 110 mm - Exchangeable glue pot: Yes - Feed speed: 7 m/min - Glue tank capacity: 0.8 kg - Pre-milling unit present: Yes - Pre-milling tool diameter: 80 mm Duedpey I Rf Hofx Ad Nst - Pre-milling tool height: 56 mm - End trimming unit: HM saw blade - End trimming unit saw blade diameter: 125 mm - End trimming unit speed: 12,000 rpm - Radius and straight milling unit: Yes - Milling tool diameter: 58 mm - Milling unit speed: 12,000 rpm - Radius scraper unit: Yes - Glue scraper unit: Yes - Anti-adhesion spray unit: Yes - Brush unit: Yes - Cleaning spray unit: Yes - Serial number: KK00006654

Condition: used, total width: 1,200 mm, total height: 1,300 mm, Colour: Green Weight: 750 kg Dimensions (LxBxH): 265 x 120 x 130 cm - Documentation available: No - CE certificate present: No - Max. planing width [mm]: 500 - Max. planing depth [mm]: 20 - Infeed table length [mm]: 1430 - Outfeed table length [mm]: 1130 - Total table length [mm]: 2630 - Cutter block diameter [mm]: 1200 - Number of knives [pcs]: 4 - Diameter extraction nozzle [mm]: 150 - Height adjustment: Manual - Voltage [V]: 400 - Fuse [A]: 32 - Transport dimensions: 2650mm x 1200mm x 1300mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Duedey Ncfzepfx Ad Net Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, operating hours: 9,974 h, total height: 2,700 mm, total length: 7,700 mm, total width: 2,420 mm, Empty weight: 7.390 kg CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Details: Dusdpfxownhcco Ad Nst - └ Description: Machine gives malfunction spindle - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002032 - Operating hours: 9974 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 36 - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Capacity [m³/h]: 250 - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 - Transport dimensions: 7700mm x 2420mm x 2700mm (l x w x h) - Transport weight [kg]: 7390kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, GMN TSE 240 cg - 5000 / 37 grinding spindle 384124, unused, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dujdpfx Adji Eaams Not

Condition: used, Year of construction: 2018, total height: 2,300 mm, total length: 3,870 mm, total width: 1,900 mm, Empty weight: 2.500 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: AH/121500 - Number of milling spindles [pcs.]: 12 - Type milling table: Flat table - Drilling unit present: Yes - Saw unit present: Yes - Tool changer positions [pcs.]: 8 - Tools included: Yes - Table length [mm]: 2570 - Table width [mm]: 1290 - Working range X [mm]: 2486 - Working range Y [mm]: 1255 - Z-axis working range [mm]: 150 Dedpexrdngofx Ad Nsut - X-axis maximum stroke [mm]: 3120 - Y-axis maximum stroke [mm]: 1685 - Z-axis maximum stroke [mm]: 250 - Transport dimensions: 3870mm x 1900mm x 2300mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets