Used Scm T 110 I for sale (89,921)

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 Ljdpfx Asixxwmemzohn High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cutting height (max.): 90 mm, cutting width (max.): 3,800 mm, saw blade diameter: 380 mm, overall weight: 4,400 kg, cutting length (max.): 3,800 mm, main saw diameter: 380 mm, Beamsaw SIGMA IMPACT 90 (SCM Group) suitable for furniture panels precize cutting by one or more panels overlapped. Manufacturer: SCM Group Model: Sigma Impact 90 Production year: 2017 Cutting width: 3.800 mm Cutting depth: 3.200 mm Max. cutting height: 90 mm Front tables (air cushion): 1x 2.500x600mm, 3x 2.500x600mm Machine basement with air-cushion. Max. main blade diameter: 380 mm Scorer diameter: max. 300 mm Lhjdpex Nc Ayjfx Amzsn PUSHER: brushless motor, max. speed 120 m/min ! SAW CARRIAGE: brushless motor, max. speed 150 m/min ! THK linear guides for the saw carriage movement. THK linear guides for the PUSHER movement. Automatic centralized lubrication of THK linear guides. Hi-Tronic kit: - main motor 15 kW (mode S6) - vertical movement of main and scoring blade by price ball-screws - optimized stroke of the main blade - electronic scorer adjustment in 2 axis (vertical, horizontal) - grooving with the main blade (electronic depth adjustment) - postforming cuts - window cut outs (blind cuts) - AKE flange for main and scoring blade Quantity of clamps (grippers): 10 pcs (maximum) Automatic exclusion of the clamp acting on the panels edge (up to 800 mm width). Start/stop pedal. Label printer. Control SW: WINCUT Optimalisation program: OTTIMO PERFECT CUT TOP (1x HW key) Control PC Eye-S: Windows + LCD touch screen 21" Air conditioning device for the electric box. Panel´s dimension automatic measuring. Laser line for the visualisation of the cutting line. Automatic double side aligner - motorized (60-2.200 mm). Machine stat: fully working Possibility to see in actuall production. Availability: cca April 2026

Condition: good (used), C.E. Lhsdpfx Aezn I Hfomzsn

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 160 mm, number of axes: 5, This 3-axis SCM PRATIX 25 CNC Wood Machining Centre was manufactured in 2015. It features a large working area of 3100x1550 mm, a 5-axis milling head, and dual tool changers with 10 and 16 positions. Equipped with a powerful 16.5 hp motor and a vacuum pump capacity of 100 m³, it supports HSK F63 clamping and Xilog Plus software. If you are looking to get high-quality milling capabilities consider the SCM PRATIX 25 machine we have for sale. Contact us for more information. • 5-axis milling head • Motor: 16.5 hp • Lateral tool changer: 10 positions • Turret tool changer: 16 positions Lhsdpfxozug R Ns Amzsn • F18 drilling unit with saw in X direction • HSK F63 clamping system Additional equipment • Vacuum pump: 100 m³ • Xilog Plus software

Condition: repair required (used), Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Lhsdey I Srzepfx Amzjn Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in a two-belt configuration immediately available - from stock in 54634 Bitburg Technical data Sanding width 1100 mm Min. / max. working height 4 / 170 mm Lhsdpfjcr S Ecex Amzen Sanding belt width 1115 mm Sanding belt length 1900 mm Feed speeds 4.5 / 9 m/min Feed motor 0.33/0.55 kW Motor power, table adjustment 0.25 kW Power of drive motor 11 kW Electrical voltage 400 V Phase(s) 3 phases Mains frequency 50 Hz Length 1650 mm Width/Depth 1820 mm Height 1960 mm Image shows optional equipment Wide belt sanding machine in a two-belt configuration up to 1100 mm with numerous optional features for cost-conscious workshops Robust, tubular reinforced monoblock steel machine body with work units mounted high up for maximum rigidity User-friendly due to clear control panel on the front Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air consumption Automatic star-delta start for the main motor Natural rubber feed belt with a negative profile Support table with two rollers at the infeed and outfeed of the feed belt Belt feed via geared motor with two speeds Flexible steel pressure bar in front of the first unit Rubber pressure rollers, before and behind each work unit Pneumatic belt tension per unit with decimal correction option for grain size/belt thickness Quality - Made in Europe RTC version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit Combination unit with finely adjustable working height for calibration and fine sanding with rubber-coated roller Ø 120 mm (45 Sh) and hard sanding shoe with graphite coating on a replaceable insert Scope of delivery: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with an electronic system Rubber-coated, grooved pressure roller at the infeed, 1° position with anti-rollback protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic belt centering Location: From stock in Bitburg - at a special price

Condition: excellent (used), Catalog number 6368 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 130mm 7 spindles: Lodpfx Aeztzgismzohn 1) horizontal, lower 230mm, 5.5kW 2) vertical, right 130mm, 5.5kW 3) vertical, left 130mm, 5.5kW 4) horizontal, upper 230mm, 7.5kW 5) horizontal, upper 230mm, 11kW 6) horizontal, lower 230mm, 18.5kW 7) universal 230mm, adjustable at 360 degrees, 5.5kW - all spindles adjustable up/down, left/right - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 adjustable electrically up/down - from above, 8 feed rollers, metal, twisting, including 2 double rollers - from above, 4 feed rollers, rubber - from above, 2 pressure rollers - from below, pawls - from below, on the side, 3 pressure rollers - from below, 2 metal rollers, smooth, feed rollers - from below, 2 double rollers, feed rollers, rubber - rollers pneumatically pressed - feed mechanism on cardan shafts - stepless feed speed adjustment 5-36m/min - feed motor 4kW - electric adjustment of planing thickness 0.75kW - length of infeed table 1980mm - enclosed in a cabinet - central lubrication of the table - dust extraction nozzle diameters 5x120mm, 2x150mm - dimensions (L/W/H) 5500x1840x1900mm - weight approximately 5000kg ADVANTAGES – Italian made – with 7 heads – for wet and dry wood – last spindle is universal – unpainted – used planer, very good condition Net price: 116900 PLN Net price: 27190 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication Ljdpfx Aez Dtb Demzehn – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 22 (ca.) Panels thickness (min/max) mm 10 / 45 (60) Numerical Control Eye-M Feeding speed (adjustable) m/min 30 max (ca.) Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) RT/H (2 x kW 4 ca.) Dual-Mode Glueing Unit (Hot Melt Glue + Quick Melt system) VC600 + QMS-P Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit YU/SP (2 x kW 0,55 ca.) Rough Trimming unit R-E (2 x kW 1 ca.) Fine Trimming unit RSU/E (2 x kW 0,55 ca.) Multi-Profile? Corners Rounding (contour trimming) Unit C1 + C2 (4 x kW 0,35 ca.) with micro-adjustments? Profile edge scraping unit RCS (IN-OUT) Multi-Profile? Lsdsz Nyp Hopfx Amzehn Free space Glue scraping unit RCA (In-Out) Hot Air Heater (to reactivate the color of plastic tape) PH 1600 Buffing unit (2 x kW 0,3 ca.) OPTION: Automatic Return System (fastBack)

Condition: ready for operation (used), Year of construction: 2003, number of axes: 3, This 3-axis SCM PRATIX 48 NST was manufactured in 2003. It features a working area of approximately 1220 x 2440 mm and is equipped with a vacuum nesting table. The machine includes an HSK electrospindle with a power range of 7.5–9 kW and a tool changer, either linear or side-mounted. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM PRATIX 48 NST machine we have for sale. Contact us for further details. • Working area: approx. 4' × 8' (1220 × 2440 mm) • Table: Vacuum nesting table Ljdpfxozug Etj Amzjhn • Spindle: HSK electrospindle, 7.5–9 kW • Tool changer: Linear or side-mounted ATC • Drilling block: Vertical drills (standard) • Controller: SCM Xilog

Condition: excellent (used), Year of construction: 1999, machine/vehicle number: AB/118718, functionality: fully functional, SMC SCIE spindle shaper SI12TW Table length: 1,500 mm Spindle adjustment: up/down Blade adjustment: up/down Lsdpfjzc Dxzsx Amzehn Blade angle adjustment: up to 45° Cutting width on the right side: 1,450 mm Maximum blade diameter: 300 mm Milling spindle diameter: 35 mm Spindle speed: 3,000/4,500/6,000/8,000/10,000 rpm Saw speed: 4,000 rpm Motor power: 4 kW Available in the Ardennes region.

Condition: new, Year of construction: 2025, Working width: 25 - 230 mm Lhsdpfx Amezwvpaozsn Working height: 10 - 120 mm Minimum workpiece length: 450 mm Feed rate: 5 - 25 m/min Spindles: bottom, right, left, top, universal Surfacing spindle: 4 kW Both vertical spindles: 5.5 kW Spindle (top): 4 kW Universal spindle: 4 kW Spindle diameter: 40 mm Spindle speed: 6000 rpm Machine available ex works, without tools.

Condition: excellent (used), Year of construction: 2000, I sell the window angular centre SCM Multiflex. Lhodpjhw Dfyofx Amzon Moulding heads VIVALDI EU68mm. Cutting + Tenoning spinde right side / Tenoning side. 2 pcs. Profiling spindles + glass strip cutting machine left / Profiling side. Available immediately.

Condition: used, machine/vehicle number: 007981, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Lsdjzz Ipmopfx Amzehn

Condition: excellent (used), Catalog number 7713 TECHNICAL DATA - Max. width of the workpiece: 240mm - Max. height of the workpiece: 130mm - 6 spindles: 1) Horizontal lower, 240mm, 7.5kW 2) Vertical right, 130mm, 5.5kW 3) Vertical left, 130mm, 5.5kW 4) Horizontal upper, 240mm, 7.5kW Lodpfx Amoztzhgjzohn 5) Horizontal upper, 240mm, 5.5kW Spindles 4 and 5 are adjustable up/down electrically 6) Horizontal lower, 240mm, 5.5kW - All spindles are adjustable up/down, left/right - Spindle diameter: 40mm *Top: - 8 feed rollers, metallic, toothed, including 3 double rollers - 4 delivery rollers, smooth, rubber, including 2 double rollers *Bottom: - 3 feed rollers, smooth - 3 side pressure rollers - Infinitely variable feed speed adjustment via frequency inverter - Pressure rollers pneumatically actuated - Feed motor: 7.5kW - Feed on Cardan shafts - Electric adjustment of planing thickness - Body lifting motor: 0.75kW - Length of the infeed table: 2480mm - Pneumatic opening/closing of the hood - Pneumatic blowing of the table - Central lubrication of the table - Diameter of the dust extraction nozzles: 3x120mm, 3x150mm - Dimensions (L/W/H): 5300x1700x1800mm - Weight: 5000kg ADVANTAGES - Made in Italy - With 6 heads - For both wet and dry wood - Pneumatic opening of the hood - Pneumatic blowing of the table - Spindles 4 and 5 are adjustable electrically - Used planer, very good condition Net price: 99900 PLN Net price: 23240 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to exchange rate fluctuations)

Condition: like new (used), functionality: fully functional, SCM SERGIANE STV 12-13-250 edge banding press Maximum pressing length: 12,000 mm Maximum pressing width: 250 mm Maximum pressing height: 1,300 mm Number of vertical clamps: 56 Number of front clamps: 12 Pressing force: 5–15 kg/cm² Lsdpfxozlhnwo Amzshn CE certified DTR documentation included Overall length: 16 m Year of manufacture: 2019

Condition: excellent (used), functionality: fully functional, two bottom heads one side - right head Lhodpfxoz D Acwj Amzon heads with 21 spindles spindles span 32mm motors 3x1,1kW 2 pneumatic pressure regulation of span between heads right/left spindles

Condition: used, Year of construction: 2012, functionality: fully functional, Condition: fully operational, well maintained, in production. Available immediately! SCM SIGMA IMPACT 87 panel saw, 2012 years, powerful, accurate, and reliable industrial panel saw designed for high‑productivity furniture and panel‑processing operations. Ideal for woodworking factories, cabinet manufacturers, and large-scale production. Technical specifications Cutting dimensions: 3200 × 2100 mm Lhodpfx Aoycg Rmemzjn Main blade projection: 87 mm Main blade diameter: 350 mm Main blade speed: 3900 rpm Main motor power: 5.5 kW Scoring blade: 1.5 kW, 6300 rpm, 160 mm Carriage speed: 6–30 m/min Pusher speed: 27–38 m/min Standard grippers: 5 Dust extraction ports: 3 × 120 mm or 1 × 150 mm

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Ledezc Ilxepfx Amzohn

Condition: as good as new (ex-display), Year of construction: 2025, minimax ti 55es LL – Table saw The illustration shows the T 55 i elite s in its standard version. The professional machine for skilled tradespeople, featuring a pivoting milling spindle and 4 speeds. M Digital: motor-driven height adjustment and pivoting. Sturdy steel and cast iron construction. Oversized milling unit made of cast iron, pivoting up to -45° to the rear. Lhodpfsdqzh Rsx Amzon LED display of milling speeds. Fast, trouble-free speed change via eccentric clamping. Clockwise/counterclockwise rotation. Display of height and inclination with 1/10 mm accuracy. Heavy-duty professional fence: with fine adjustment via rack and pinion, with numerical display, aluminum fence cheeks, 3-way positioning for quick repetition of the setting. Scope of delivery: Aluminum fence cheeks Arched milling guard Table extension on the left and right Model: minimax ti 55es LL Article no.: 5502252 Technical data Dimensions of the work table: 2500 x 655 mm Dimensions of the format sliding table Usable length of the spindle: 125 mm Max. tool diameter: 240 mm Max. tool diameter (lowered): 230 mm Max. tool diameter (dovetail cutter): 320 mm Spindle inclination: 0 to -45 degrees Speeds: 3500/6000/8000/10000 min-1 Motor power 400 V/ 50 Hz / S6-40%: 5.0 kW Dust extraction port diameter: 2 x 120 mm

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers Ljdpfxezuyk Nj Amzohn End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, optional equipment: Machine table in 2 support systems – left table half with TVN supports, right table half with ALU table and its own vacuum circuit. Travel ranges: X = 4400 mm, Y = 1720 mm, Z = 400 mm Tool holder HSK 63 F Motor 7.5 kW, 900 - 20,000 rpm Inverter 18 kW for spindle unit – increased power output up to 11 kW Tool changer RAPID 24 = 24 tool positions Drilling unit with 18 spindles Equipment for door processing (H = 110 mm) - for processing left and right doors - with 4 pneumatic positioning aids, each with a capacity of 20 kg - 6 reference stops with veneer overhang Laser positioning for TV system Central extraction connection above the CNC unit Vacuum pump 250 m³ Control system/control cabinet: - NUM Series 1000 with Office PC - XILOG-PLUS - Cable remote control - Analog modem with software for teleservice Swinging machining standard for 2 work areas LED display / suction cup positioning Motorized chip conveyor 3-part floor mat / front Large accessory package with vacuum suction cups, stops, etc. Machine from a carpentry business closure due to retirement Machine is still in operation and in very good condition available at location Lsdpfxszxzgme Amzjhn

Year of construction: 2014, condition: like new (used), "EASY PLUS" electronic control from the control panel 2 axes: - Automatic control of the left spindle vertical and horizontal position of the upper spindle. - Selection of the feed speed. - 7 "color LCD display Ljdpjh Nvt Uofx Amzjhn Min.working width (finished size) 25 mm Working width (finished size) 230 mm Min.working height (finished size) 6 mm Working height (finished size) 120 mm Min. Length of a single element 450 mm Variable feed speed controlled by an inverter 5 - 25 m / min Pneumatic pressure of the feed shafts Top feed shaft in front of the planer 3kW feed motor power 5.5 kW planer motor power Vertical spindle motor power (single) 11kW Power of the upper horizontal spindle motor 9kW Spindle speed 6000 rpm. Spindle diameter 40 mm Length of the vertical spindles 140 mm Length of the horizontal spindles 250 mm Axial adjustment of the vertical spindles relative to the 40 mm worktable Axial adjustment of the horizontal spindles in relation to the right ruler of 40 mm Min./max. tool diameter on the planer 120 - 140 mm Min./max. tool diameter on vertical spindles 100 - 180 mm Max. Profile on the vertical spindle 40 mm Min./max. tool diameter on the upper spindle 125 (100-180) mm Feed shaft diameter 140 mm Length of the feeding table 2000 mm Quick adjustment of the table at the entrance and 10 mm ruler Manual pump for greasing the STD table

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Stop system: Stop cylinders Number of vacuum pumps: 1 Lsdpfjvvi Htex Amzjhn Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Storage location: Sonnefeld

Condition: excellent (used), Double side - Independent Machine (1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 10 (ca.) / 60 Working width (min/max) mm 260 (ca.) / 3200 Numerical Control MAESTRO PRO EDGE /Software EYE-M Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) with CNC vertical adjustment Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side + Glueing Unit (PUR Glue + Quick Melt system) CNC adjustment of the edge height Band Pressure zone (N.C. adjustment) + Edge coils support (No 6 reels) CNC positioning of the edge Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C. adjustment) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Milling grooving unit U (1 x Kw 5,5) on Left-side Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Lhodpfjzmfg Tsx Amzon Buffing unit SPE