Used Semi-Automatic Case Erector for sale (28,371)

Condition: good (used), Cyklos GPM 450SA Semi-Automatic Creaser Machine in very good condition, ready for production. Kljdpfxozaz N Ej Anwju Description: Working width up to 450 mm. Programmer with the ability to save up to 15 creasing/perforation positions. Sheet is fed manually and then automatically retrieved. Easy-to-use control panel with program storage. Sturdy metal construction. Creasing or perforation across the width of the sheet (creasing tool included). Creasing of digital prints and laminated sheets is possible. 4 different creasing widths are standard. Large work table.

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! Klsdpfxoq Dzi To Anwsu No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: excellent (used), The Tramper D-360 trays dispenser is a reliable and compact machine designed to automate the packaging process in the food industry. The device feeds trays to the packaging line quickly and precisely, increasing efficiency and reducing manual labor. It is ideal for plants producing ready meals, meat, fish, cheese, and other products that require tray packaging. Technical data: Producent: Tramper Technology Model: D-360 Project number: T99278 Kjdpfx Aswmn Amonwolu Year of manufacture: 2013 Main power supply: 400 VAC Control: 24 VDC Air supply: 6 bar Tray dimensions: 227 x 178 mm Weight: 160 kg Construction: stainless steel – suitable for hygienic environments ✅ Key advantages: Automatic tray feeding – smooth integration with tray sealers and packaging machines Compact design – saves space on the production line Simple and intuitive operation – easy adjustment to different tray formats Compliance with sanitary standards – ideal for the food industry High reliability – proven Tramper brand quality Easy installation and maintenance – design engineered for everyday use The Tramper D-360 perfectly supports the automation of the packaging process, reducing downtime and increasing line efficiency. It is the ideal solution for manufacturers looking for a proven and efficient tray feeding system.

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, cutting width (max.): 610 mm, power: 0.01 kW (0.01 HP), Extreme robustness and maximum power! The Legend_600 has a completely painted, thick and reinforced steel structure. Kledpjfcdnljfx Anweu The blade with a diameter of 600 mm, the power of 9.2 kW and the rotation speed of 2750 rpm make it the ideal machine for those who work with wood up to a maximum of 150 mm thick and 610 mm wide.

Condition: new, Year of construction: 2024, warranty duration: 12 months, Semi-automatic rolling machine Rondo SWL 640 Kedpsy Ui D Ujfx Anwelu - Year of manufacture: 2024 - Unused - Power supply: 400 V/3 phases - Belt length: 1,400 mm - Belt width: 640 mm - Machine body painted - 12-month warranty - Collection from warehouse/shipping option available - Price on request

Year of construction: 2026, condition: new, functionality: fully functional, New machine 24-month warranty Features: + Excellent price-performance ratio + Standard version includes: mobile machine, ideal for fast floor cleaning + Partial blades made of stainless steel + Coated knife head + Uniform dough division + Excellent rounding of dough pieces + Ergonomic knife cleaning position (head can be swivelled forward by 90 degrees) + Easy and quick adjustment of chamber height + Lateral holder for rounding plates, immediately at hand Standard equipment: + 3 rounding plates included General technical data: Performance: 0.75 kW Connection data: 400V - 3Ph - 50Hz Protection: 16A CEE plug Dimensions: 60 x 70 x 152 cm (W x D x H) Height with lever: 220 cm Net weight: 340 kg Size 4-30: Number of pieces: 14 dough pieces Piece weight: 130 - 400 grams (depending on dough/product) Dough input: 1,820 - 5,600 grams (depending on dough/product) Optionally available: - Additional rounding plates Klodpfsivdnnox Anweu Surcharge: €115 net / piece.

Year of construction: 2026, condition: new, functionality: fully functional, New machine 24 months warranty Features: + Excellent value for money + As standard: mobile machine, ideal for fast floor cleaning + Stainless steel dividing blades + Coated blade head + Uniform dough portioning + Outstanding dough rounding performance + Ergonomic knife cleaning position (head swivels forward 90 degrees) + Quick and easy adjustment of the pressing chamber height + Lateral holder for rounding plates, within easy reach STANDARD equipment: + 3 rounding plates included General technical data: Power: 0.75 kW Electrical connection: 400V - 3Ph - 50Hz Protection: 16A-CEE plug Dimensions: 60 x 70 x 152 cm (W x D x H) Height with lever: 220 cm Net weight: 340 kg Kljdpfx Aohydmhjnwsu Size 3-30: Output: 30 dough pieces Piece weight: 25 - 80 grams (depending on dough/product) Dough input: 750 - 2,400 grams (depending on dough/product) Optionally available: - Additional rounding plates Surcharge: €115 net / each

Year of construction: 2026, condition: new, functionality: fully functional, New machine 24 months warranty Features: + Excellent price-performance ratio + Standard equipment: mobile machine, ideal for fast floor cleaning + Stainless steel dividing knives + Coated knife head + Even dough division + Outstanding rounding of dough pieces + Ergonomic knife cleaning position (head can be swiveled 90 degrees forward) + Easy and quick adjustment of working chamber height + Side-mounted holder for rounding plates, immediately accessible STANDARD Equipment: + 3 rounding plates included Technical Data (general): Power: 0.75 kW Electrical connection: 400V - 3Ph - 50Hz Fuse: 16A CEE plug Dimensions: 60 x 70 x 152 cm (W x D x H) Height with lever: 220 cm Net weight: 340 kg Size 4-30: Quantity: 30 dough pieces Kjdpfx Anoivdngowjlu Piece weight: 40 – 120 grams (depending on dough/product) Dough feed: 1,200 – 3,600 grams (depending on dough/product) Optionally available: - Additional rounding plates Surcharge: €115,-- net / each

Condition: used, Column-guided bandsaw semi-automatic METORA - KALTENBACH Type HMB 380 DS Only for 90° cuts (Made in Austria) Machine No. 4580028 Year of manufacture: approx. 1993 Cutting capacity round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw band speed: 25–108 m/min, continuously variable Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw in double-column design - Hydraulic saw bow descent with stepless adjustable cutting pressure - Stepless adjustable descent speed - Hydraulic vice clamping with hydraulic bundle clamping from above - Hydraulic unit integrated in machine base - Material feed roller on infeed side with geared motor (not mounted on machine frame) - Coolant system with coolant pump for water emulsion - Minimum-quantity lubrication system for the saw blade - Electric heating cartridge for cooling water and hydraulics Kodpfx Ansdzqtgjwslu - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display, and hydraulic stop carriage clamping Stop length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable without roller conveyor Machine footprint (L x W x H): 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of stop system: approx. 800 kg In good condition

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 Kedspu R Nvjpfx Anwjlu - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: like new (used), Year of construction: 2014, functionality: fully functional, operating hours: 60 h, power: 0.5 kW (0.68 HP), input voltage: 400 V, Equipment: CE marking, documentation/manual, Vitap Eclipse Semi- Automatic contour edge bander 2014 max working 60 hour Kodsy Rmyfspfx Anwelu

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Solvent recovery: 60-70%. Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Kedpfefiulfsx Anwelu Electric protection IP65. NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.350+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on the Kjeldahl method. Automatic, to analyse protein nitrogen in raw material samples or processed material for the food industry. Specific methods available. Results comply with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Features • Twenty free user programs. • Additionally, the system has three fixed programs: – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages • Optional kit for automatic titration. • Sample suction. • 20 user programs. • Pump calibration by end-user. • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance • Measurement range: from 0,1 to 200 mg of N. • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consumption: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety Klodpfjfiliwjx Anwou • Closed-door detection. • Digestion tube detection. • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies, there is the possibility of selling in installments. Price Euro 3.600 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), functionality: fully functional, The Tecma Pack FM1200p Cartoner is an industrial machine dedicated to automatic end-of-line cartoning. It forms, fills, and seals cartons with precision, ensuring optimal standardization of packaging. This makes it ideally suited for food processing environments that require steady throughput and high reliability. With its automated system, the FM1200p ensures continuous production and a constant flow of cartons. It significantly reduces manual handling while increasing overall productivity. As a result, it optimizes end-of-line performance and minimizes human error. Additionally, its gluing system guarantees a clean and secure seal, which is crucial for logistics and transport. This cartoner stands out for its ability to handle various carton sizes while maintaining a consistent speed. It easily integrates with conveyors, filling machines, or palletizing systems. Its robust design allows for continuous operation in demanding industrial settings. The Tecma Pack FM1200p Cartoner is a strategic solution for automating packaging while controlling costs. As a refurbished piece of equipment, it delivers high performance at an optimized investment. Technical Specifications: - Output: 1,200 cartons/hour - Machine power: 2 kW - Gluing unit power: 4 kW - Air consumption: 7 m³/h - Air pressure: 6 bar - Gluing system: hot melt - Control: programmable logic controller (PLC) - Weight: 1,000 kg - Dimensions (L × W × H): 3,950 × 1,860 × 2,250 mm Klodoy Nxnlspfx Anweu --- ❓ What should you check before investing in the FM1200p? What is the actual output of this cartoner? It reaches 1,200 cartons per hour, supporting continuous industrial production. Is the gluing system reliable for transport? Yes, the hot melt gluing system provides strong and consistent carton sealing. Can it be easily integrated into an existing line? Yes, it is designed to operate at the end of the production line with conveyors and palletizing systems. What types of cartons can it handle? It supports various formats, offering great production flexibility.

Year of construction: 2025, condition: new, ECOSPIR TS POWER PRE – Stretch 200% Test machine used as a temporary machine. This machine was only in operation for one week and is available at a special price. Original price: €6,599.00 These are very robust and largely maintenance-free machines that impress not only with their exterior design, but also with sophisticated and well-engineered technology. Technical Specifications: Operation via TOUCH SCREEN Klsdoy St Edepfx Anwou Film tension adjustable via TOUCH SCREEN up to 200% (1 m = 2 m) Storage for 8 wrapping programs Turntable diameter: 1500 mm Continuous turntable load capacity: 1200 kg Maximum pallet height: 2200 mm Power supply: 240 V, 50 Hz, 1.5 kW Adjustable film carriage speed Adjustable top and bottom wrapping Cross wrapping / spiral single wrapping Height detection via photocell Can wrap black products or black stretch film (optional) Machine with CE certification Warranty: 24 months (single-shift operation)

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Kodpfey Tu Rqjx Anwelu Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Weight: 615 kg.

Condition: new, Year of construction: 2026, functionality: fully functional, ATTENTION!!! SPECIAL OFFER!!! LAST ONE LEFT!! Features: Semi-automatic operation Hydraulic control of arm movement (up – down), with smooth adjustment of descent speed Arm position memory function Hydraulically controlled vice jaws Hydraulic cutting clamp included Hydraulic band tensioning Band cleaning brush Cooling system Bimetal band saw CE Declaration of Conformity Technical data: Type: Semi-automatic column type Control: control panel at the front of the machine Maximum cutting diameter: 350 mm, 400 x 350 mm Arm lifting: Hydraulic Arm lowering: Hydraulic Bandsaw speed: 25/60/75 m/min Vise: Hydraulic Min. cutting diameter 5 mm Min. material length in the vise 30 mm Klsdsy Tipnspfx Anwsu Distance from the base of the vise to the floor 780 mm Cutting band dimensions 4515 × 34 × 1.1 mm Total power 5.2 kW Belt speed 25/60/75 m/min Dimensions (L×W×H) 2400 × 1250 × 1550 mm Weight 1200 kg Manufacturer: Cormak

Year of construction: 1990, condition: used, Inline Drum filling - / capping machine Pos. number: LTC00005452 Make: Ocme Type: LFT300 Year of build: 1990 Range: 60 litre / 200 litre drum Frame: steel Dimensions: L x W x H = 6.000 x 2.400 x 3.000 mm Kjdpfxsh Uca Sj Anwelu Weight: 3.500 Kg Power-supply: 3x380 Volt – 50 Hz – 1,5 kW Features: manual / automatic program filling / capping /seal applicator / screw

Year of construction: 1988, condition: good (used), Bucket sealer Kedpfxsigyp Hs Anwslu Make: Soft Electronic Systems Type: Semi-automatic bucket sealer Model: PMS 2 GH Capacity: Up to 300 buckets per hour Frame: Stainless steel Range: Buckets up to D = 300mm Dimensions: L x B x H = 1.000 x 900 x 1.000 mm Weight: 150 Kg Power supply: 380 Volt – 50 Hz – 1,5 kW Comp. Air: > 5.5 Bar Features: manually positioning of bucket automatic seal process (adjustable time) automatic sliding towards cutting device automatic pushing and rotating knife manually reeling up the film manually removing of bucket

Year of construction: 2004, condition: used, Semi automatic screw capper make: Zalkin Model: TM-3 Build 2004 Klodjiby Hmspfx Anwou now equiped for max 90mm cap hand/footpedal operated

Condition: excellent (used), Make: Lubeca Type: semi-automatic 1 head can-seaming machine Model: LW210 Range: diameter 99 – 235 mm height 15 – 320 mm Speed: up to 300 cph Frame: mild steel, paint-coated Dimensions: L x W x H = 700 x 800 x 2.000 mm Power-supply: 380 Volt – 50 Hz – 1,1 kW Control: on-off switch with overload-protection security pneumatic double-hand operation Tooling: 1 set tooling round can, customer choice Ksdjibc Easpfx Anwolu

Condition: used, Year of construction: 1996, Used Case Erector Mondo & Scaglione 376 / C up to 23 box/min This Case Erector not only forms cardboard boxes of the “American” type but also ensures high efficiency and reliability. Additionally, it seals the bottom of each box with hot melt glue, and, most importantly, it processes up to 23 boxes per minute. Therefore, it is perfect for production lines that demand both precision and speed. Carton Magazine and Carton Transfer Carriage First, the machine features a horizontally mounted carton magazine at the lower rear, which optimizes space and provides easy access for loading. Furthermore, the multifunction carton transfer carriage picks, opens, and transfers cartons using an electromechanical control system. As a result, this setup ensures precise, continuous operation and significantly reduces downtime during format changes or adjustments. Flap Closing and Glue Application Kljdjvgvi Aspfx Anwju Next, this machine automatically manages the closing of box flaps. Specifically, it closes the short lower flaps using an electro-pneumatic command, while the long flaps close as the carton moves. In addition, the hot melt glue unit ensures a reliable, secure bottom seal. Consequently, the machine handles these processes entirely automatically, which, in turn, increases efficiency and minimizes the need for manual intervention. Control and Safety Systems In terms of control, the machine continuously monitors the presence of cartons in the magazine and during transfer through advanced control systems. Moreover, it alerts operators when excess cartons accumulate at the exit. Operators, meanwhile, control all machine functions via a touch-screen display, which simplifies adjustments and format changes. Additionally, this display immediately shows any anomalies or technical issues, which helps improve preventive maintenance efforts. Siemens PLC and Safety of the Used Case Erector Mondo & Scaglione 376 / C up to 23 box/min The Used Case Erector Mondo & Scaglione 376 / C up to 23 box/min, in addition, uses a Siemens S7 series PLC to precisely control every operation. Moreover, the electrical system uses low-voltage controls, which further improves operator safety. Additionally, the machine includes protective guards and safety devices to meet workplace safety regulations, thereby ensuring safe use in highly regulated production environments. Performance and Technical Specifications In terms of performance, the machine can produce between 15 and 23 boxes per minute, depending on box size and configuration. As for the carton magazine, it holds between 100 and 150 cartons, thus allowing continuous operation without frequent reloading. Furthermore, it runs on 1.5 kW of power, with an additional 3.5 kW for the glue system, making it energy-efficient. Additionally, the machine operates at a working pressure of 5 bar and consumes 80-100 liters of air per minute, which further contributes to its overall efficiency.

Condition: used, Year of construction: 2009, Used Case Erector Bondani 2009 Ksdpfjvgupzex Anwjlu The Used Case Erector Bondani 2009 is a machine manufactured by Bondani. The model number is P CV – 900, and it was produced in 2009. Currently, the machine is in storage. It has various safety features in place to ensure the safety of operators and those working in the vicinity. The machine comes with manuals to provide guidance on proper use and maintenance. The Used Case Erector Bondani 2009 is a reliable and efficient tool that is well-suited for a variety projects.

Condition: used, Year of construction: 2005, Used Case Erector Mondo e Scaglione 2005 Case Erector with hot glue closure horizontal cardboard formation nordson glue heater possibility of forming and closing various carton formats Ksdpsvgumtjfx Anwolu painted iron frame accident prevention protections production about 1,500 cartons per hour the machine is in compliance with c and year 2005 with manuals in excellent used condition

Year of construction: 2017, condition: used, Manufacturer : Transvis Type: Semi-automatic cap screwdriver Kedpfx Ajy H Rfqenwelu Application: screwing / capping Year: 2017 Maximum product dimensions: Ø 54.5 x 82 mm Minimum product dimensions: Ø 45.5 x 68 mm Product weight: 90–150 g HMI control panel Asynchronous motor power: 0.18 kW Two-hand control Torque control Overall dimensions: 650 x 1000 x 1800 Screw capper dimensions: 650 x 935 x 990 Weight : 100 kg Spare parts and formats available Power supply: 220V single-phase / 6 bar compressed air Technical documentation available Video available in running condition