Used Sennebogen 305 for sale (814)

Condition: used, Rotary vane vacuum pump Manufacturer: Busch Type: R5 RA 305 D Voltage: 50/60Hz 400V Rjdpfx Ajdbbzded Aet Nominal suction capacity: 300m³/h Ultimate pressure: 0,5hpa(mbar) Status: Refurbished Warranty- 12 months Included: Motor re-storage, repainting, electrical check Delivery time: ex stock

Condition: used, Year of construction: 1991, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN throat 305 mm total power requirement 5,5 kW Redpfx Aed Ih Stsd Ajt weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Westtech Woodcracker C300 Felling Grapple / incl. ALBACH quick coupler / BRAND NEW / in stock & immediately available - Softwood cutting diameter (mm): 350 - Hardwood cutting diameter (mm): 300 - Grapple opening (mm): 1,430 - Shear opening (mm): 550 - Own weight (basic version – full equipment) (kg): 750 – 1,080 - Recommended main circuit flow rate (l/min): 70 – 150 - Recommended auxiliary flow rate (l/min): 45 – 60 - Recommended operating pressure (bar): 280 - Carrier vehicle operating weight (t): 12 – 18 Specification: Rjdpfoyxkq Dsx Ad Ajt - incl. Autospeed function - incl. ALBACH quick coupler We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and readily available. In our warehouse we offer a wide selection of Westtech products that are immediately available! Mr. Herden (Tel. ...) will gladly assist you. On request, we are happy to provide you with a financing offer. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco Furthermore, with 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the entire Westtech Woodcracker product range for you! Subject to change and prior sale. = More Information = New: Yes Net weight: 850 kg Suitable for: Forestry applications Contact Marius Herden for further information.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: PE-305L-1307, rotational speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller model: SIEMENS 840D, TECHNICAL DETAILS X-axis travel (longitudinal): 400 mm Y-axis travel (cross): 250 mm Z-axis travel (vertical): 250 mm Resolution X, Y, and Z axes: < 0.1 µm Feed rate X, Y, and Z axes: max. 24 (48) m/min Rotary axis for workpiece (A-axis) Indexing mode resolution: < 0.0001° Speed range as rotary axis: max. 200 rpm Speed range universal rotary axis: max. 2,500 rpm Torque: max. 88 Nm Swivel axis for grinding head (C-axis) Swivel range: 225° Resolution: < 0.0001° Swivel speed: max. 360°/s Grinding spindle (motor spindle) Max. speed: 12,000 rpm Drive power: 15 kW Taper: HSK 50 E MACHINE DETAILS Control: SIEMENS 840D Drive technology: SIMODRIVE 611D Connected load: 30 A Rsdoyvq Sispfx Ad Ajt Number of axes: 5-axis EQUIPMENT GEA Multitron Junior air extraction system, year of manufacture 2008 Volmat FA-120S filtration system with cooling, year of manufacture 2008 Motoman MX100 industrial robot with control cabinet, 400V (not functional) Note: The machine has already been completely dismantled.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 7,200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 5,500 W, tool weight: 3,000 g, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of approximately 7200 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful 5.5 kW electrospindle and a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for further details. • Control system: MMI CNC control • Operating system: Windows OEM software Redeyv H Nkopfx Ad Aot • Number of controlled axes: 4 (maximum configurable axes: 5) • C-axis rotation: 180° (-90° / +90°) • Drive system: Servo motors • Axis control: CNC controlled • Spindle type: Electrospindle • Tool magazine capacity: 11 positions • Maximum tool diameter: 200 mm • Maximum tool length: 150 mm • Maximum X-axis feed speed: 80 m/min • Maximum Y-axis feed speed: 60 m/min • Maximum Z-axis feed speed: 40 m/min • Voltage: 400 V (tolerance ±10%) • Frequency: 50/60 Hz • Total power consumption: approx. 7.2 kVA • Maximum current: approx. 18 A • Compressed air pressure requirement: approx. 6 bar • Machine structure: Steel machine frame Technical Specification Taper Size ISO 30

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Rodpfx Adex Uyzqe Ajt The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 1979, Kapp AST‑305B – Technical Specifications Machine type: automatic hob and gear cutter sharpening machine Year of manufacture: circa 1979 Machine function: resharpening of hobs, spiral or straight gash cutters; wet or dry grinding Maximum tool diameter capacity: 12 inches (300 mm) Maximum tool length between centers: 27 inches (700 mm) Maximum table traverse: 21.56 inches (550 mm) Maximum grinding wheel diameter: 12 inches (300 mm) Maximum center height: 6.1 inches (155 mm) Table speed (infinitely variable): – deep grinding: 30 to 1000 mm/min – surface grinding: 3 to 16 mm/min Flute lead angle range: 0° to 45° Flute lead range: selectable, up to 24‑inch to zero or 12‑inch to zero Grinding spindle speed: 2200 rpm (optional 1000–4000 rpm) Rsdpfx Aowwkt Asd Ajt Axial grinding spindle adjustment: 16.54 inches (420 mm) Vertical grinding head adjustment: 11.81 inches (300 mm) Spindle taper: Morse 4 or steep taper 40 Preselectable single in-feed: range 0 to 9999 (units) Machine dimensions: length 118 in × depth 82 in × height 93 in (≈3000 × 2080 × 2360 mm) Machine weight: approximately 7,500 lbs (3,000 kg) Control system: originally manual/analog, often upgraded with Allen‑Bradley PLC

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 3,425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2004. It features a powerful 5.5 kW electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The tool magazine is centrally located, protected, and supports various tools. It has a standard workpiece length up to 4000 mm and an extended range up to 8000 mm. Contact us for more information about this machine. • A (rotation): ±125° • Spindle Type: Electric, air-cooled • Tool magazine: • Located in the middle of the machine base in a protected area • Accommodates various tools: milling cutters, taps, end mills, angle heads • Construction: • Welded steel structure for maximum rigidity • Linear guides with ball screws • Automatic central lubrication of guides and screws Rjdpfx Ajx D I Hkod Aot • Cooling: Centralized minimum lubrication system (MQL) • Working range: • Standard workpiece length: up to 4000 mm • Extended range (differential cycle): up to 8000 mm

Condition: good (used), Tandem cargo bike, load rollers, heavy-duty rollers, heavy-duty wheel, tires, solid rubber tires -Heavy-duty wheel: Double solid rubber tire -Tire type: 415/75-305 -Receipt: Ø 90 x 58 mm -Bolt circle: Ø 220 mm -Dimensions: Ø 415 x 215 mm Quantity: 1 piece available Redpelyvcxsfx Ad Aet -Weight: 49 kg

Condition: new, functionality: fully functional, empty load weight: 400 kg, maximum load weight: 2,300 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,530 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MP 305 153 2700 2 NEW VEHICLE Internal dimensions: 305cm x 153cm Side panel height incl. railing: 43cm Loading deck height: 54cm Gross vehicle weight: 2700Kg Payload: 2300Kg Braked twin-axle low-loader trailer Overrun and handbrake by KNOTT 2 x 1350Kg braked axles Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls Steel railing Rear side wall foldable and removable with tension latch 15mm thick, non-slip and durable phenolic plywood floor Jockey wheel 6 lashing eyes with 400Kg tensile strength each 14" reinforced commercial C tires M+S tires Net/rope hooks on the frame 13-pin connector Front position lights Rear lights with reversing light, fog light, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Folding and removable front panel - Integrated loading ramps, 2000Kg capacity - SARIS alloy wheels - Complete LED lighting - Anti-theft device - Net, fine or coarse mesh - H-frame - Mesh side extensions in various heights, also closed - Flat cover tarpaulin with or without hoops - High cover tarpaulin 180cm - Rear supports More accessories available on request! Plus delivery to Gera & vehicle documents €150 net Images are for illustration purposes and may show optional equipment subject to surcharge. Haven’t found the right trailer yet? We always have 50-100 vehicles in stock, ready for immediate collection. Our workshop is open weekdays 8:00 – 17:00 for all types of repairs. Axle repair specialist, including for caravans. Large range of rental trailers available. We also have a large selection of spare parts and accessories for all trailer brands. Rjdpfx Aork Ip Iod Aet Get advice by phone, visit our website, or come and see us directly.

Condition: new, functionality: fully functional, empty load weight: 365 kg, maximum load weight: 1,635 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,530 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MP 305 153 2000 2 NEW VEHICLE Internal dimensions: 305 cm x 153 cm Sidewall height incl. rail: 43 cm Loading platform height: 51 cm Gross weight: 2,000 kg Payload: 1,635 kg Braked tandem low loader Overrun brake and handbrake by KNOTT 2 x axle with 1,350 kg brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels Steel rail Rear side panel fold-down and removable 15 mm thick, slip-resistant and robust phenolic plywood floor Jockey wheel 6 lashing rings with 400 kg pull force 13" tyres M+S tires Net/rope hooks on the frame 13-pin connector Front marker lights Rear lights with reverse light, fog lamp, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Folding and removable front panel - Integrated loading ramps 2,000 kg - SARIS lightweight alloy wheels - Full LED lighting - Anti-theft lock - Fine- or coarse-mesh net - H-frame - Mesh extension in various heights, also enclosed - Flat cover with or without bows - High cover 180 cm - Rear supports Further accessories available on request! Plus freight to Gera and vehicle registration document €150 net Images are for illustration purposes and may show optional accessories at extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate collection. The workshop is open on weekdays from 8:00 - 17:00 for repairs of all kinds. Rjdperk Iprjfx Ad Aet Specialist in axle repairs, also for caravans. Wide range of rental trailers. We also have a large selection of spare parts and accessories for trailers of all brands. Get advice by phone, visit our website, or come by in person.

Year of construction: 2007, condition: ready for operation (used), A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible. Rjdpjyiflgsfx Ad Ast

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 630005, center height: 305 mm, center width: 1,000 mm, travel distance X-axis: 350 mm, travel distance Z-axis: 1,160 mm, controller model: KELCO 90, TECHNICAL DETAILS Centre height: 225 mm / 305 mm Centre distance: 1,000 mm Travel Z-axis: 1,160 mm Travel X-axis: 350 mm Max. workpiece weight: 200 kg Workpiece diameter: 449 mm Left grinding wheel diameter: 500 mm Left grinding wheel width: 80 mm Left grinding wheel bore: 203 mm Right grinding wheel diameter: 400 mm Right grinding wheel width: 40 mm Right grinding wheel bore: 127 mm B-axis swiveling range: +30° / -190° Max. grinding wheel speed: 1,720 rpm Peripheral speed: 45 m/s Workpiece spindle speeds from: 5 rpm Workpiece spindle speeds up to: 500 rpm Spindle taper: Morse taper 5 (MT 5) Tailstock quill taper: 4 Morse (MT 4) Tailstock quill stroke: 50 mm Feed rate X-axis: 8 m/min Feed rate Z-axis: 16 m/min Max. table tilt: -1° / +11° MACHINE DETAILS Control: KELCO 90 Total power requirement: 25 kW Connection: 50 Hz, 3x 380 Volt Dimensions & Weight Machine dimensions (L x W x H): 2,850 x 2,200 x 2,100 mm Control cabinet dimensions (L x W x H): 550 x 450 x 900 mm Machine weight: approx. 6,000 kg EQUIPMENT 80 mm riser block Coolant system Automatic tool measurement KELSET Wheel dressing device Internal grinding device (without spindle) Set of flanges Set of grinding wheels Rjdpfx Aeyhnrvsd Ajt Balancing arbor Lamp Magnetic chuck diameter (2x): 300 mm / 500 mm Electronic hand-held control panel

Condition: used, machine/vehicle number: 305/70 R 19,5, first registration: 11/2005, color: other, Year of construction: 2005, USED TRAILER TIRES. Redpfx Asxwku Rjd Ajt

Condition: used, Luenette Rodpfx Aocrcv Ujd Ast Diameter 150 mm Height without base 420 mm Width of the foot 125 mm

Condition: new, cutting diameter 280 mm saw band length 3370 mm cutting width 350 mm dimensions of saw-band 3370 x 27 x 0,9 mm 280 mm 250 mm Rsdpfx Adoivuqto Ajt 350 x 200 mm 240 mm 220 mm 230 x 220 mm 170 mm 150 mm 170 x 100 mm saw tape speed 37 + 74 m/min total power requirement 1,8 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,5 x 1,7 x 2,0 m

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm Rodpfx Aju Dbvted Ast 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: excellent (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 32 mm -Transport width: 305 mm -Socket: M10 single-sided, ball bearing Redpfx Adsxyglws Ast -Number: 24x transport casters available -Price: per piece -Dimensions: 330/32/H37 mm -Weight: 0.7 kg/pc.

Condition: good (used), PLC controller, expansion module, interface module -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 305-7LA11 -Number: 1 module available -Dimensions: 50/135/H300 mm -Weight: 1.1 kg Rjdpfocar Agsx Ad Aet

Condition: excellent (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers Redpsxyf Ikefx Ad Ajt -Conveyor belt rollers: Transport rollers, diameter 60 mm -Transport width: 305 mm -Receiver: single-sided, ball-bearing mounted (see photos) -Number: 46x transport casters available -Price: per piece -Dimensions: 350/80/H80 mm -Weight: 1.9 kg/pc.

Condition: used, Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1200 x 305 mm -Total height: 70 mm -Struts: wall thickness 2 mm Rodpfx Adjrri Tho Aet -Bridge height: 40/9 mm - Gratings: Hot-dip galvanized -Quantity: 2x grids available -Price per piece -Weight: 10 kg/piece

Condition: used, Transport trestle, steel trestle, heavy-duty shelving, steel trestles, heavy-duty trestles, tubular bearing trestle, transport trestle -Steel trestles: pipe bearing trestles / transport frames 2 pieces -Execution: massive steel construction with wooden support -Usage: for storage and transport of heavy round material -Price / fee: complete -Dimensions: 1300/305 / H980 mm -Weight: approx. 206 kg / pc. Rjdpfx Ajhd Rq Hed Ajt

Condition: used, clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press Rjdou N Sinopfx Ad Aet -Clamping surface: 365 x 305 mm -Dimensions: see photo technical drawing -Dimensions: 365/305/H150 mm -Weight: 57 kg

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: Flange/shaft: see photo, square 8 x 17 mm -Number: 6x pumps available -Price: per piece Rsdpfx Adjvwi Nqj Ajt -Dimensions: 87/84/H100 mm -Weight: 1.9 kg

Year of construction: 2012, condition: excellent (used), Electric cable winch, cable winch, hoist winch, construction winch, electric cable hoist, cable hoist Rjdpfx Adsdbyhls Aot -Tension 1 layer: 2000 kg -rope speed 1 layer: 10 m/min - Wire rope: 10 mm -Cable length: 65 m per layer -electrically powered -without control -Number: 1x winches available -Dimensions: 1850/640/H650 mm -Own weight: 616 kg