Used Shel Lab Shel Lab Sc05A-2 Co2 Series Co2 Incubator for sale (80,587)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. Lhodpfx Amsmx Sl Tetsi The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Lsdswcwbqjpfx Amtehi

Condition: like new (used), functionality: fully functional, Year of construction: 2024, overall weight: 160 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,930 mm, input voltage: 230 V, input frequency: 50 Hz, laser wavelength: 10,600 nm, type of input current: AC, laser type: CO₂ laser, Equipment: lighting, With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. Ledpowkpyhefx Amtshi The standard equipment includes a laptop incl. holder with Windows operating system. The LAS 28 laser model can optionally be equipped with a rotary axis (3-jaw chuck) for labelling cylindrical parts. Other options, such as lateral cantilevers for labelling long parts, can also be realised. 30W CO2 laser (optional: 60 W) - Wavelength 10640nm - marking field size 220x220 mm - optional: rotary axis (3-jaw chuck) - optional: exhaust system (incl. activated carbon filter) - optional: extension arm for large workpieces (also on both sides) - marking software EZCAD in German / English - Pilot laser (simple preview) - focus finder (easy focus adjustment) - max. part height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with operating system Windows - frame made of aluminum profile - air cooled - door width approx. 720mm / door height: 400mm - Connection 230V - Dimensions: approx. 1000 x 800 x 2000 mm (LxWxH) - Weight: approx. 140 Kg

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: AYA320NY3006, overall weight: 950 kg, total length: 1,700 mm, total width: 1,650 mm, total height: 2,120 mm, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, Mazzali Intensys Lab Burn-in industrial (climate) oven, including manual Type: Intensys Lab 12+12HD Code: AYA320NY3006 Year of construction: 2007 Mains connection: 400V Temperature range: -40°C / +180°C (external cooling) Load capacity: 12 plates Oven Dimensions: 72 x 50 x 72cm Lsdpfx Amjwm Htqetshi Dimensions: 170 x 165 x 212 cm Weight: ~950 kg

Condition: used, Year of construction: 2016, Trotec Speedy 100 R (30 Watt CO2) – Year of manufacture 2016 Offered for sale due to business closure. A reliable, professional Trotec Speedy 100 R with a 30W CeramiCore laser source. Ideal for engraving and cutting wood, acrylic, leather, and plastics. Condition: The machine starts up immediately, connects perfectly with JobControl, and engraves/cuts properly. Maintenance: The machine has been idle for some time and requires maintenance. The filters of the extraction system need to be replaced, and the axes/mirrors need to be realigned. The price has been adjusted accordingly. Operating hours: Due to a known display error (overflow bug) in JobControl, incorrect hours are currently being displayed. The official, encrypted Trotec Service Log file (9.1 MB) is available for serious buyers to demonstrate the machine's history. Specifications & Accessories: Working area: 610 x 305 mm Includes Trotec Atmos extraction system (filters need to be replaced) Includes all original cables Lhsdpfozd Utdex Amtei Location: Riemst / Vroenhoven area (Belgium), close to the Dutch border (Maastricht). Sale conditions: Sold in its current condition ("as is, where is"). Assistance with loading is available. A very competitive fixed price for quick buyers.

Condition: new, empty load weight: 9,600 kg, Year of construction: 2026, Gas tank semi-trailer for CO2 Carbon dioxide New gas tank semi-trailer for CO2 Carbon dioxide Manufacturer: CRYOBASE GmbH Volume 23 m3 Working pressure 22 bar Pump Tare weight 9600 kg First registration: year 2026 We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail Lsdjymza Djpfx Amtohi

Condition: new, Year of construction: 2025, functionality: fully functional, NEW – PBE Series Automatic Panel Bending Center | 5 models available | Immediate delivery from stock Condition: New, Year of construction: 2025, Functionality: Fully operational TECHNICAL SPECIFICATIONS: Max. bending length: 1,000 mm (PBE-1000) – 3,000 mm (PBE-3000) | Customizable Max. bending width: 1,000 mm (PBE-1000) – 1,400 mm (PBE-1400) | Customizable Max. bending height: 170 mm (all models) | Min. 110 mm for t-1 mm available on request Minimum workpiece size (all four sides): 110 mm (PBE-1000) / 200 mm (PBE-1400 to PBE-3000) Minimum workpiece size (one side): 100 mm (PBE-1000) / 170 mm (larger models) | Hemming: 130–180 mm Lhodpfx Aoymcvtomtsi Bending angle: ±0–180° (all models) Minimum sheet thickness: 0.35 mm MAX. HOLDING FORCE (Standard / Heavy): PBE-3000: 115 T / 155 T PBE-2500: 80 T / 115 T PBE-2000: 38 T / 53 T PBE-1400: 28 T / 38 T PBE-1000: 20 T MAX. MATERIAL THICKNESS (Standard / Heavy): Material PBE-3000 PBE-2500 PBE-2000 PBE-1400 PBE-1000 Stainless Steel (SS) 1.2 / 1.5 mm 1.2 / 1.5 mm 1.2 / 1.5 mm 1.2 / 1.5 mm 1.2 mm Aluminium (AL) 2 / 3 mm 2 / 3 mm 2 / 3 mm 2 / 3 mm 2 mm Mild Steel (MS) 1.5 / 2 mm 1.5 / 2 mm 1.5 / 2 mm 1.5 / 2 mm 1.5 mm Power supply: 380V 50/60Hz (transformer available as an option) MACHINE FEATURES: • Automatic multi-sided bending – no tool changes required • Universal tooling automatically adjusts to programmed dimensions • Positive and negative bending in a single setup: arcs, hemming, combined angles • Bending speed 0.2 s/bend – 3× faster than conventional CNC press brake • Intelligent CNC control system for consistent, repeatable results • Single setup positioning – first-edge shearing error is controlled • Multiple positioning references selectable according to workpiece geometry • Energy-saving design – reduces labor and tooling costs TYPICAL APPLICATIONS: Fire doors, elevator panels, computer cases and enclosures, furniture, integrated kitchens, HVAC covers, commercial cold chain equipment, lighting, storage shelving, ceiling panels, air purifiers INCLUDED SERVICES: • 12-month warranty • Spare parts availability • Technical support and commissioning • CE documentation available upon request Offered by HawkTech s.r.o. – certified industrial machinery dealer, Czech Republic. Delivery to CZ, SK, and EU. Price on request.

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 1930036, operating hours: 6,900 h, This is a used twin-screw extruder for processing moist materials. (A complete overhaul is included in the price and will be carried out by Brabender/now Anton Paar.) The machine was used to produce textured soy protein in a purely vegan facility. The textured soy protein is moist, and it was used to produce vegan products such as "cutlets," "fish," "nuggets," "bacon," etc. Lodezhnluspfx Amtshi

Condition: excellent (used), Wittmann Temperature Controller Here we offer a Wittmann temperature controller. Lhedpfx Aozd Ruwomtji Wittmann Temperature Controller DISCO 2 Singulus 3X415V 50/60Hz 16A 5kW Type: TR7B7D7D0X_09_00 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2019, Laser source: Manufacturer: SYNRAD, a Novanta Company Model: FSV40SFD Ledpsxzuimsfx Amtehi Type: V40 Series: firestar Year of manufacture: 2018

Condition: new, Graco Monark 222839 Series H07A air-powered pump with 222791 air motor, serial number as shown in the photo, unused and in opened original packaging, 100% functional. Ledpfx Amei Eacletehi

Condition: used, functionality: fully functional, Dans cette offre, vous achetez un système de perforation d'occasion "GBC SteamPunch Ultra". État : Il s'agit dans cette offre d'un appareil d'occasion qui peut présenter des traces d'utilisation. (petites éraflures ou jaunissement). Le fonctionnement de l'appareil a été testé. Lhedpfx Amorvhyzjtsi Emballage et expédition : Vous pouvez volontiers venir voir l'appareil pendant nos heures de bureau. Veuillez prendre rendez-vous à cet effet ! Un emballage résistant à la mer et une expédition dans le monde entier sont possibles sur demande ! Pour plus d'informations, vous pouvez bien sûr nous contacter personnellement.

Condition: used, mileage: 319,813 km, power: 338 kW (459.55 HP), first registration: 11/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, * Sun visor * ABS * ASR * ESP * Active Brake Assist * Lane departure warning * Radio * Auxiliary heating * Cruise control * Hill start assist * Electric windows * Electric mirrors adjustable * Heated mirrors * Fog lights * Rear window * Driver's comfort seat * Heated seats * Diff. lock rear axle * Lift/steering axle * Steel bumper * Orange rotating beacon * Air intake at top * Air dryer * Trailer coupling * Duomatic air connection Lsdpfewr Rzcex Amtehi * MAN BrakeMatic * Navigation system * Air horns * Central locking * Cornering light * Roof hatch * Cool box * 2-wire air connection * 12-speed * Suspension: leaf-air * Payload: 14290 * Continuous brake: Intarder ----Construction: Meiller roll-off tipper RS 21.65 for 4.5-6.5 mtr container length, 21,000 kg lifting capacity, radio remote control, push arm, hydraulic + manual container locking, hydraulically extendable underrun protection, rapid traverse, additional hydraulic connections at the rear. Sale only to traders. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORTS !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales discussions (see legal notice).

Condition: used, mileage: 445,996 km, power: 294 kW (399.73 HP), first registration: 02/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2024, brakes: retarder, color: orange, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, crane, * Sun visor * ABS * ASR (traction control) * Radio * Cruise control * Electric windows Ledpfxow Sbqgs Amtjhi * Electrically adjustable mirrors * Mirror heating * Roof hatch * Rear window * Air-suspended driver's seat * Rear axle differential lock * Lifting/steering axle * Top air intake * Air dryer * Trailer coupling * 2-line air connection * HydroDrive front axle drive * 16-speed * Suspension: leaf/air * Payload: 11,550 kg * Constant brake: retarder ----Special bodywork: Crane: Hiab Jonsered 1420, raised seat with seat heating, pilot control, fully hydraulic outriggers, 6th + 7th control circuit for rotary servo and grab operation. Read load chart: Lifts at 3m-4.25t, 4m-3.24t, 5m-2.68t, 6m-2.28t, 7m-1.95t, 7.9m-1.65t.----Body: Meiller hooklift RK 20.70 for 5.5-7.4 m container/total container length, 20,000 kg lifting capacity, pusher arm, extendable rear underrun protection, internal controls. Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. Our General Terms and Conditions (see legal notice) form the basis for all contracts of sale, invoices, pro forma invoices, orders, and sales discussions.

Condition: used, mileage: 445,996 km, power: 294 kW (399.73 HP), first registration: 02/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2024, brakes: retarder, color: orange, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, crane, * Sun visor * ABS * ASR (anti-slip regulation) * Radio * Cruise control * Electric window lifters * Electrically adjustable mirrors * Mirror heating * Roof hatch * Rear window * Air-suspended driver's seat * Rear axle differential lock * Lift/steering axle Lsdpfxow Sbqas Amtohi * Top-mounted air intake * Air dryer * Trailer coupling * 2-line air connection * HydroDrive front axle drive * 16-speed gearbox * Suspension: leaf/air * Payload: 11,550 kg * Retarder brake: Intarder ----Special body: Crane: Hiab Jonsered 1420, elevated seat with seat heating, pilot control, fully hydraulic outriggers, 6th and 7th control circuits for slewing and grab operation. Read load chart: lifts 4.25 t at 3 m, 3.24 t at 4 m, 2.68 t at 5 m, 2.28 t at 6 m, 1.95 t at 7 m, 1.65 t at 7.9 m.----Body: Meiller roll-off tipper RK 20.70 for 5.5-7.4 m container/total container length, 20,000 kg lifting capacity, pusher arm, extendable underride guard at rear, interior controls. Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT WARRANTY, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, pro forma invoices, orders, and sales discussions are our Terms and Conditions (see Legal Notice/Imprint).

Condition: like new (used), functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Trotec, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, SP3000 400 Watt CO2 • 2.210 x 3.210 mm working area • Laser pointer • Gas kit • InPack Technology™ • 2.5” lens, 5.0” lens • Software-controlled Z-axis • Active laser deflector shield • Air-cooled optics • Operator console without PC • Laser system complies with laser safety class 2 with integrated laser safety class 4 laser source • Traveling exhaust • Digital table exhaust system • Sonar Technology™ Ledpfx Amjzaq Ikstehi • Tandem operation • Standard PC for the operator console with mouse, keyboard, and 24” Full-HD monitor, Windows® 10 Multi-Language, JobControl® Expert pre-installed • Cooler for 400W/380V • Aluminum grid table SP3000 • Matching extractor for optimal results. 3-phase power supply Advantages of the Trotec SP 3000 Spacious working area: The SP 3000’s working area of 2,210 x 3,310 mm is designed for large sheet sizes. The working area is easily accessible from all four sides. The loading width is 2,500 mm, and it is open at the front and rear. The open design allows the system to be loaded from all sides, even during cutting. This makes daily work as productive as possible. Extremely fast cutting with the highest quality: Even at the highest speeds, up to 1 m/sec and 1g acceleration, the SP 3000 delivers the best cutting quality. The innovative drive concept, the precise linear guides, and the innovative drive concept testify to excellent construction, made in Austria. Air-cooled optics for optimal cutting quality: All optics are air-cooled with clean compressed air during laser processing. The optics are kept free from contamination that arises during laser processing. This guarantees maintenance-free operation and a long service life for these high-quality components. Fully enclosed beam path for 24/7 operation: The laser beam is protected along its entire path through the machine. Safe operation is guaranteed. The class 4 laser system can be used as safely as a class 2 system. No additional safety measures are required. Reliability through InPack Technology™ and Harsh Environment Protection: The core of Trotec’s unparalleled mechanical reliability is the fully dust-proof and maintenance-free axis system. Traveling exhaust package: The sophisticated airflow concept with extraction above and below the workpiece guarantees high-quality engraving and unparalleled cutting results. JobControl® software package: Much more than a standard printer driver. With JobControl software, you can optimize the use of your material and customize the workflow to your own needs. Service and support: Your direct connection to the manufacturer of your system guarantees the best service and availability of parts.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 9,414 h, This BLM Adige LT8 4kW Co2 was manufactured in 2014. It features a Rofin DC035 3.5kw laser source and is equipped for tube cutting with a 3D cutting head. It handles materials up to 12mm thick and 206mm round, with lengths up to 6500mm. Consider the opportunity to buy this BLM Adige LT8 4kW Co2 tube cutting machine. Contact us for more information about this machine. Additional equipment • Bundleloader: 6.5 meters • Steploader: 6.5 meters • Output with Conveyor Belt: 6.5 meters at the front, 4.5 meters at the back Machine Benefits Technical Machine Benefits • Equipped with a 3d cutting head • Includes options such as weld detection, active focus, active scan, active piercing. • Laser source: rofin dc035 3. 5kw • Last maintenance: 24/6/2025 • Maximum weight: 35 kg/m • Maximum length: 6500mm • Maximum round diameter: 206mm • Maximum square: 200x200mm • Maximum thickness: 12mm Extra Information Ljdpfx Ajx H A Rxjmtohi Machine still under power

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Ljdpfxsh Hd A Sj Amtjhi Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Equipment: documentation/manual, We offer an very special development line of water transfer printing with complete know how of CUBIC - JAPAN EQUIPMENT CAN BE USED FOR ALL KIND MATERIALS, PLASTIC, WOOD, METAL AND OTHER.... Specifications Manufacturer COLOR DEC Model ITALY-CUBIC LAB 2000 Year 1996 Condition Used COMPLETE CUBIC PLANT- 3D WATER TRANSFER PRINTING EQUIPMENT LOOK ATTACHED PHOTOS Include complete production equipment for 3D watertransfer print. -washing machine -transport system for clean room -clean room humidity device -storage for the CUBIC FILMS - heating-drying cabine for lack drying -bath with halfautomatic floating system- possiblle to make more parts at once, depende from the size of printing parts Lhsdevk Ev Hepfx Amtei Equipment is in perfect working condition, ready to use. FOR ADDITIONAL PHOTOS WE CAN SEND BY EMAIL. ALL DOCUMENTATION WILL BE PRESENT TO BUYER.

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 2 mm, table height: 825 mm, back gauge travel distance R-axis: 630 mm, input voltage: 380 V, overall weight: 1,360 kg, total length: 2,700 mm, total width: 1,500 mm, total height: 1,200 mm, warranty duration: 12 months, cutting length (max.): 2,050 mm, working length: 2,050 mm, Equipment: documentation/manual, finger protection, Mechanical sheet metal guillotine METFORMER MCO-2x2000mm The guillotine is made entirely of steel, the structure is solid and heavy. Simple design with good looks. It is easy to use. This guillotine is widely used for cutting thin and medium steel sheets in light engineering, hardware manufacturing. The blade is made of a super strong steel alloy. Technical data: Model, MCO-2x2000, Engine power, kw, 3.0, Maximum sheet thickness (mm), mm, 2, Number of knife changes, pcs, 4, Length, mm, 2800, Width, mm, 1260, Height, mm, 1300, Ljdpovlxh Eofx Amtshi Weight, kg, 1350,

Condition: as good as new (ex-display), functionality: fully functional, Compact and quiet CO2 laser with a maximum marking area of 460 x 305 mm (L x W) and a maximum object height of 145 mm. Possible applications: For laser engraving and laser cutting of plastics, wood, glass, and other organic materials, as well as coated surfaces. Engrave glass, create plastic signs, cut, mark, and define fold lines on paper. High-quality workmanship: The laser engraver consists of a one-piece aluminum housing and includes professional CAD/CAM software and an RF laser source. Lhjdpsy Ia Dxjfx Amtji Efficient and safe operation: The space-saving laser is equipped with an automatic scanning function, autofocus for automatic vertical adjustment, an integrated control panel, and an illuminated marking table with a wide front-loading door. In addition, an air compressor for clean lenses and an extraction system are integrated. Laser parameters can be stored in a library. Multi-technology software: for the central collection of settings, designs, and results in a working environment. Equipped with a point-and-shoot function for easy positioning and job setup, as well as a print-and-cut function for cutting printed materials. Dimensions: 775 x 725 x 450 mm Marking area: 460 x 305 mm Maximum object height: 145 mm Maximum speed: 2,540 mm/s Laser source: CO2 Power: 40 W Software: Gravostyle software (not included)

Condition: good (used), Year of construction: 2017, functionality: fully functional, working width: 225 mm, Used deburring machine with a sanding belt and cup brush for deburring. The conveyor belt has been replaced. The machine can be inspected while powered on. Ledszbhd Sepfx Amtshi Available immediately.

Condition: used, Refrigerant compressors system Bitzer Lsdpfxjy Aw S Ne Amtshi -Type: 4HTC-20KI-40S (x3), 2HHC-2KB-40S (x2) -Volume: 12 m3/h (x3), 4.34 m3/h (x2) -Control cabinet included -Dimensions: 3200 x 870 x 1850 mm -Cabinet dimensions: 2050 x 1200 mm -Items in magazine: 1 -Reference number: Z122 -Condition: Used in very good condition, ready to work

Condition: used, Refrigerant compressors system Bitzer -Type: 4FTC-20KI-40S (x3), 2HHC-2K-40S (x1), 2KHC-05K0-40S (x1) -Volume: 17.8 m3/h (x3), 4.34 m3/h (x3), 2.71 m3/h (x3) -Control cabinet included Lhodpjx Rp R Tjfx Amtsi -Dimensions: 2950 x 950 x 1950 mm -Cabinet dimensions: 2050 x 1200 mm -Refrigerant: CO2 -Items in magazine: 1 -Reference number: Z121 -Condition: Used in very good condition, ready to work

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Lhsdpeh S H R Sofx Amtoi Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING