Used Six Station Volumetric Filler for sale (6,139)

Condition: ready for operation (used), Can diameter range: 60 mm – 125 mm Can height range: 50 mm – 140 mm Number of pockets: 18 Capacity: up to 300 cans per minute Nsdpfxsyyq D Te Abzocw

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Ncedpfx Absdy Hqvozow Max. cutting section at 45° 40 x 100mm 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase CE Safety requirements

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Ncedpfx Aeb Tmrvsbzow Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. Ncodpfsdzc Rfex Abzsw The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Optional side and end stops for floor cassette assembly

Condition: new, Year of construction: 2023, Transformer substation, concrete construction, UF2742 Dimensions (L × W × H): 2.70 m × 4.18 m × 3.32 m Medium-voltage switchgear, Siemens 8DJH type • 2 ring cable feeder bays • Auxiliary switch • Short-circuit indicator Ncedpfx Aoznmuhobzjw • Capacitive voltage indication system • 1 transformer feeder bay • Auxiliary switch • Overcurrent and earth-fault protection with WIC relay • Capacitive voltage indication system Three-phase oil transformer • Type: SBG • Power: 1,250 kVA • Hermetically sealed design

Condition: like new (used), The can seamer is the machine used to hermetically seal the lid to the can body before sterilization. Depending on the product, sterilization can also be performed before filling. The can is sealed by deforming and subsequently overlapping the metal layers of the can body and the lid through compression. The result is a type of hook between the two, which achieves a hermetic seal and, consequently, the airtightness of the container. This sealing requires a rubber gasket (sealing gasket) inserted into the rim of the lid to achieve the most effective bonding of the metal layers. Production will depend on the format and the product to be sealed. Nodpfozbi Nisx Abzscw

Condition: like new (used), TT9CW DOYPACK FILLER AND SEALER Features: * 2-stage thermal sealing process * Double-piston dosing valve * Liquid dispenser with vacuum function * Pouch material: laminated pouch * Pouch type: flat pouch, stand-up pouch (doypack) Ncodox S Ibmepfx Abzsw PRODUCT FILLING: * Suitable for product types: sauces, etc. - Dense (solid) - Liquid And also suitable for: - Solid products - Powders DOYPACK pouch dimensions: - Length: 100 mm - 250 mm - Width: 80 mm - 150 mm - Minimum filling: 50 g - Maximum filling: 350 g Output capacity: up to 90 pouches/min (depending on product) It is equipped with three sealing heads (2 thermal, 1 cooling). Station 7: First sealing head The first mechanically driven sealing head ensures pouch closure. The sealing area is Teflon-coated for easy access and quick replacement. Sealing time and pressure are adjustable via the control panel. Each sealing bar features an independent temperature controller. Station 8: Second sealing head The second mechanically driven sealing head provides an additional sealing process. The sealing area is also Teflon-coated with easy access for rapid changeover. Sealing time and pressure are adjustable via the control panel. Station 9: Third cooling sealing head The third mechanically driven sealing head stabilizes the pouch seal. The sealing area is Teflon-coated with easy access for fast replacement. Sealing time and pressure are adjustable via the control panel. *Production output may vary depending on pouch size and the type of product being filled.

Year of construction: 2016, condition: used, Filling head Markl / Bavaria, type 24/6/6, with capping unit / crown capping mechanism. Nodezmx Dfopfx Abzscw

Condition: ready for operation (used), Mahr Marshaft MAN 400 manual shaft measuring station, shaft measuring machine, measuring machine Mahr Marshaft MAN 400: Nsdpezmr D Esfx Abzjcw Measuring range, length: 400 mm Year of manufacture: 2011 MarCheck: Mahr UTS 90-M: Mahr LTS 100: Mahr DMS 120 Year of manufacture: 2014 Year of manufacture: 2016 Year of manufacture: 2011 Year of manufacture: 2011 You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2008, laser power: 50 W, This 3-axis TRUMPF Trumark Station 5000 was manufactured in 2008. It features maximum workpiece dimensions of 680 mm x 500 mm x 700 mm and a traverse path of 500 mm on the Z-axis. The machine has a maximum workpiece weight of 50 kg without the X/Y axis. If you are looking to get high-quality laser marking capabilities, consider the TRUMPF Trumark Station 5000 machine we have for sale. Contact us for further details. Njdpfx Aoza Albsbzjcw - Maximum Workpiece Dimensions (W x H x D): 680 mm x 500 mm x 700 mm- Maximum Workpiece Weight: 50 kg (without X/Y axis), 25 kg (with X/Y axis)- Traverse Path Z-Axis: 500 mm- Traverse Path X-Axis: 300 mm- Traverse Path Y-Axis: 300 mm- Traverse Speed Z-Axis: 1.5 m/min- Traverse Speed X-Axis: 6 m/min- Traverse Speed Y-Axis: 6 m/min- Electrical Connection (Voltage): 115 V / 230 V- Electrical Connection (Frequency): 50 Hz / 60 Hz- Maximum Power Consumption: < 2.55 kW- Workstation Dimensions (W x H x D): 860 mm x 2000 mm x 1310 mm- Workstation Weight (without laser): 410 kg- Laser Class: Class 1

Condition: excellent (used), 1) Main Welding Station – ACR6-P Type: Rotary welding station for narrow groove (Narrow Gap) Axes: 4-axis rotary system Control: Beckhoff CNC / HMI Weld monitoring: Stenning Video Weld Monitor System Approximate footprint: approx. 10,000 mm × 6,500 mm 2) Welder / Power Source Miller XMT 456 CC/CV — backup unit Type: CC/CV welding power source (MMA / MIG / FCAW / TIG – depending on equipment) Type: Multiprocessing Power supply: 400 V (via attached transformer) 3) Power Transformer Voltage: 400 V Dimensions: 970 × 760 × 1,200 mm (H) Application: powering machines in the welding station 4) Power Sockets Quantity: 3 × 415 V Mounting: on aluminium frame 5) Welding Lathe Dimensions: 3,000 mm × 1,200 mm × 780 mm (H) Purpose: rotary positioning of workpieces for circumferential/narrow gap welding 6) Heavy Duty Work Table Dimensions: 900 mm × 600 mm × 600 mm (H) Design: robust, industrial-grade Ncodpfxsx Upf Se Abzjw 7) Curtains and Guarding System Welding curtains: included KEMPER system: adjustable, 50 kg, wide range of adjustment

Condition: new, With filters 20 pieces 2 motors 15 kW Capacity 36,000 m³.h 400 V x 3 phases x 50 hrs 3 fan speeds Approximate dimensions: Ncodpfx Aevu Sqljbzjw 5 m 3 m x 2 m Serial number: 20-1-267 Year of manufacture: 2020

Condition: excellent (used), German-made hydraulic bookbinding press, 14 stations - rotary Nedpowm Hhzofx Abzocw

Condition: excellent (used), The minimum order quantity is 8 stations, with the price per station being €4,000. The stations are new. The line consists of stations for profiling shafts with a diameter of 50 mm and an 8 mm keyway. Material feed thickness ranges from 0.4–2.5 mm, with a strip width of 320 mm. There are 8 stations per table, driven by a 15 kW motor with a reduction gearbox. Four sets of stations are mounted on robust steel beams measuring 45 x 700 x 1,500 mm. This allows for quick changing of rollers fitted with various spare modules for finished profiling station segments. This configuration includes two table segments with 8 stations each, providing a total of 16 profiling stations. The specified price applies per set of stations on a given table. These tables can be configured and assembled according to the required profile—e.g., with 8, 16, 24, or 32 stations. The table features a strip guide and a turk's head, a straightening head, and a profile output device before the guillotine shear, a flying saw, or a fixed take-off table. Ncedpfxswxv Nlj Abzjw We offer various configurations of such solutions for these tables. By exchanging the shafts, we can achieve a maximum input width of 550 mm.

Condition: excellent (used), functionality: fully functional, Welding station consist of following main parts: 1. XYZ-Robot welding gantry 2. Positioner 3. Robot equipment 4. Welding equipment 5. Power units 6. Control panel Ncsdpfx Abewzg E Aozsw

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 2,400 mm, The Lamina Gluer is a manually fed, in-line folding, gluing, and taping machine. Thanks to its smart design, it can handle different sizes and materials. Tool-free setup enables quick changeovers, even for short production runs. Optional machine features include cold glue, rear support unit, working station, tape applicator, and more. Ncjdpfoxwcwwex Abzew The Lamina Gluer is a straight-in-line gluing machine built on a robust frame made of extruded, anodized aluminum profiles. The machine offers manual feeding as standard, with an optional automatic feeder for die-cut, creased, and slotted materials. The operator positions the blanks, and the hot melt unit applies adhesive as the material passes through the machine. Glue line length and exact position can be pre-set using a programmable logic controller (PLC) and a touchscreen interface. A system of pressure rollers ensures perfect adhesion and guides glued blanks onto a pull-out tray, which is easily adjustable for various sizes. The machine comes equipped with adjustable and interchangeable side guides, enabling efficient gluing of 2-piece boxes. The Lamina Gluer is supplied ready for connection to electric and pneumatic systems. The Lamina Working Station is an additional option for the Lamina Gluer. Products are fed through the Gluer, which applies pre-programmed glue lines, and continue into the Working Station, where they are positioned on vacuum belts. A second piece is mounted and positioned using side lays and pneumatic stops for high-quality finishing. The unit can be adjusted for a wide range of products, from single- to multi-part displays and boxes, large back supports, shelves, and more. Transport The material is conveyed by four vacuum belts that bring the sheets to a stop bar for subsequent operations. The vacuum is generated by a fan that secures the sheets for optimal handling and precise registration. During production, the operator has full access above the sheets for additional mounting, thanks to the vacuum belt design. Pressure Rollers Material passes through two pressure rollers at the machine’s end for optimal adhesion. Registration Registration accuracy is +/- 1 mm and is achieved by a combination of photocell sensors and pusher guides. The operator uses a side lay guide to simplify the mounting process at the station.

Condition: ready for operation (used), Year of construction: 2021, A stationary Brabender residual moisture and moisture content measuring device is offered. Relative measuring range: 0.0001%H₂O-15%H₂O, absolute measuring range: 0.01mgH₂O-15mgH₂O, moisture content resolution: 0.01mg, resolution: 1ppm, relative resolution: 0.0001%H₂O, measuring temperature range: 30°C-160°C, temperature setting: in 1°C increments, sample weight: approx. 0.05g-20g, max. sample volume: approx. 50cm³, accuracy: better than approx. 0.6mg, ambient temperature: +10°C to +45°C, relative humidity: 5%-95%, storage temperature: -20°C to +55°C, relative humidity: 5%-95%, measuring distance: approx. 1m, measuring height: approx. 1.6m. Dimensions X/Y/Z: 562mm/420mm/275mm, weight: 27.6kg. Documentation available. Inspection possible by appointment. Nodozli Urjpfx Abzscw

Condition: used, Year of construction: 2021, Overview This Twin Monkeys Cimarron is a compact automated canning system (monobloc can filler + seamer), built in 2021 by Twin Monkeys Beverage Systems (Denver, USA) and distributed and serviced in Europe by Agrovin. Designed for craft breweries, it fills and seams standard 0.33 L and 0.44 L beverage cans at up to 3,000 cans per hour in its current single-lane configuration. Cans run through a fully automatic cycle: air purge, filling, lid application under CO₂ and seaming. The low-oxygen filling system works with a fill tolerance of ±2 g and dissolved-oxygen pickup as low as 20 ppb; a wedge-style seamer (patent pending) closes the cans. All parameters are managed on the color touch-screen PLC, including automatic CIP wash cycles, cycle counters and operator help screens. The machine is still installed and in production and can be seen in operation. Technical data - Manufacturer: Twin Monkeys Beverage Systems (Denver, USA) - Model: Cimarron - Year of manufacture: 2021 - Machine type: automated canning monobloc (can filler + seamer) - Capacity: up to 3,000 cans/h in the current single-lane configuration - Can formats: standard 0.33 L and 0.44 L (Ø 66 mm); Slim / Sleek formats (Ø 52.8 mm) possible with optional change parts - Filling accuracy: ±2 g; dissolved oxygen as low as 20 ppb - Control: color touch-screen PLC incl. automatic CIP cycle - Compressed air (clean, dry): 90 psi / 4.5 cfm (approx. 6.2 bar / 127 L/min) - CO₂ supply: 20 psi / 1.0 cfm (approx. 1.4 bar / 28 L/min) - Materials: stainless steel AISI 304, anodized aluminium, technical plastics - Dimensions (L x W x H): approx. 2,000 x 875 x 1,860 mm - Weight: approx. 330 - 430 kg (depending on configuration) - CE marked Equipment - Fully automatic air purge, filling, lid application with CO₂ injection and seaming - Wedge-style seamer (patent pending) - Lid applicator with CO₂ curtain to minimise oxygen pickup - Product tank with automatic pressure regulation - Rejection of defective cans - Rotary accumulation table at the discharge (included, see photos) - Mobile stainless-steel frame on lockable casters - Expandable platform: additional filling heads can be retrofitted (manufacturer rating up to 6,000 cans/h with 10 heads) Condition Nedpfezktv Rex Abzocw Used - good working condition, built 2021. The machine is still installed and in regular production use at the current owner's site and can be visited and seen in operation by appointment. Availability Expected availability: April - May 2027 (the machine remains in production until then). Location: Spain.

Condition: like new (used), functionality: fully functional, machine/vehicle number: C-13-309, overall weight: 900 kg, Take the opportunity to acquire a high-quality used Carat grinding and polishing station: This set consists of a control cabinet and two precise polishing machines, equipped with robotic interface for maximum efficiency. Ideal for professional industrial applications. Suitable robots can be offered separately. • Year of manufacture: 05/2013 Njdpfx Abjuzylhszecw • Total height: 240 cm • Operating pressure / max. air pressure: 6 bar • Operating voltage / frequency: 400 V / 50 Hz • Rated current: 11.5 A • Rated power: 5.5 kW Scope of delivery: 3 pallets with 2 polishing machines & 1 control cabinet

Condition: excellent (used), The ZEVATRON HTT 75/300 is a professional soldering station designed for automatic dip soldering of electronic components, wires, and sub-assemblies that require a repeatable soldering process. The unit is equipped with two independent soldering pots with electronic temperature control, an automatic working manipulator, and a control panel with a touch screen for programming operating parameters. The machine was manufactured in Germany in 2016 and is used in the production of electronics, research and development laboratories, and industrial plants. The working enclosure is equipped with a protective cover and a port for connecting a fume extraction system. Technical specifications: Manufacturer: ZEVATRON GmbH Nsdozmap Aepfx Abzjcw Model: HTT 75/300 Type: Tischlötautomat (automatic soldering station) Year of manufacture: 07/2016 Power supply: 230 V / 50 Hz Power: 920 W Rated current: 4.0 A Two independent soldering pots (Soldering Bath A and Soldering Bath B) Two electronic temperature controllers Operator panel with touch screen Programmable operating parameters Automatic manipulator for immersing parts Emergency stop button (E-STOP) Port for connecting a fume extraction system Operating manual included

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal Ncsdpfx Abelhqndezjw - power supply: 5.5 kW, 230/380 V, 50 Hz - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Condition: excellent (used), For sale is a Karl Süss HR 100 Analyse – a high-end, manual measurement and testing station designed for the analysis and contacting of semiconductor wafers and microelectronic components. The device is used in laboratories, research and development departments, and during scientific research. The station is equipped with a precise measurement table with fine adjustment, a sample holder with a vacuum function, and a mechanical lifting mechanism. It also has connections for compressed air and vacuum, which ensures stable mounting of the components being tested during measurements. Technical data: Manufacturer: Karl Süss Model: HR 100 Analyse Device type: manual testing station (Wafer Probe Station) Ncedpezl H Ayefx Abzow Application: analysis and testing of semiconductor wafers and microelectronic components Vacuum function for sample mounting Precise measurement table Connections for compressed air and vacuum Condition: used, as shown in the pictures.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 Ncedpfx Aeulpu Sebzow 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Manufacturer - Canellitech Srl Model - 8-1 (8 x filling heads). Date of manufacture - 2019. Speed - up to 500 bottles per hour. Has been used very lightly between 2019 and 2023 (2 x days per month). Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Manufacturer - Cime Careddu Srl Ncodpfx Abjulpmzezew Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Condition: used, Year of construction: 2013, Overview This KOSME Barifill RFC 50-60-10 VKP rinser - filler - capper block, built in 2013, is designed for the rinsing and filling of glass bottles in beverage production lines. The block combines a 50-station single-channel rinser, a 60-valve glass bottle filler with short-tube VKP filling system and a Zalkin CA9 360 NG rotary capping section in one compact stainless steel machine. With approx. 16,000 bottles/hour on 0.75 L and approx. 20,000 bottles/hour on 0.33 L, the block sits in an attractive mid-range capacity class for water, beer, cider, wine and other glass-bottle applications. Integrated foam cleaning supports hygienic operation; the machine is operated via a touchscreen HMI on an articulated suspension arm and is enclosed in transparent protective safety guarding with safety interlocks. The machine is still installed and under power and underwent extensive maintenance in Q4/2025. Please note: the Zalkin capping heads are not included in the sale price - the capper base machine is included; the 10 capping heads are optionally available. Technical data - Manufacturer: KOSME S.r.l. - Model: Barifill RFC 50-60-10 VKP Ncedezi I T Ispfx Abzew - Year of manufacture: 2013 - Machine type: rinser - filler - capper block for glass bottles - Filling system: short-tube VKP, 60 filling valves, 113 mm pitch - Rinser: 50 stations, single-channel, 113 mm pitch - Capper: Zalkin CA9 360 NG (2013), 10 capping positions, approx. 22,000 bottles/hour (capping heads not included in the sale price, optionally available) - Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L - Foam cleaning: integrated - Control: touchscreen HMI on articulated suspension arm - Electrical supply: 400 V, 50 Hz, 17 kW installed power, 38 A - Compressed air: 6 bar, approx. 450 Nl/min - Water: 4 bar, approx. 3.5 m³/h - Machine weight: approx. 10,500 kg Equipment - KOSME Barifill RFC 50-60-10 VKP main machine - 50-station single-channel rinser - 60-valve glass bottle filler, short-tube VKP filling system - Integrated foam cleaning - Zalkin CA9 360 NG capper base machine - Touchscreen HMI on articulated suspension arm - Stainless steel machine frame with transparent protective guarding and safety interlocks - Process piping, vacuum / air equipment, stainless steel bottle handling - Layout drawing available - Optionally available (not included in the sale price): Zalkin capping heads Condition Used - installed in an industrial production environment and still under power. The machine underwent extensive maintenance in Q4/2025 and can be visited and inspected in operation on request. Availability From November 2026 (week 45). Location: Germany.