Used Sleeving Line for sale (10,129)

Condition: used, machine/vehicle number: 007466, Position 1: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Hsdjwu Aa Nspfx Ab Nonl Position 2: Brushing Machines SUPERFICI-BRAVOROBOT P1 Position 3: Spray Robots SUPERFICI-BRAVOROBOT P1 Position 4: Ovens SUPERFICI-BRAVOROBOT P1 Position 5: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 6: Roller Conveyors SUPERFICI-BRAVOROBOT P1

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Hnedpfxox A Tbwo Ab Nol

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Hnsdpfx Abswuzzrs Nsl Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, machine/vehicle number: 007662, Position 1: Panel Feeding and Loading STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 2: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 3: Double Sided Squaring/Edgebanding Machines STEFANI + MAHROS-EVOLUTION SSB + RUNNER Hnsdpfx Ajwuzzfjb Nel Position 4: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 5: Panel Stacking and Offloading STEFANI + MAHROS-EVOLUTION SSB + RUNNER

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Hedpjihf Ufefx Ab Nenl Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Hsdolwtzyjpfx Ab Njnl Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Hnodjrn Sqhjpfx Ab Nsl Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hnedpfx Abjihf Tpj Nol Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed Hnedpfoixqg Njx Ab Njl

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Hjdpeihf Twsfx Ab Nsnl Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, machine/vehicle number: 007924, Position 1: Panel Feeding and Loading BARBERAN-RFU-4-C-1700 Position 2: Brushing Machines BARBERAN-RFU-4-C-1700 Position 3: Calender BARBERAN-RFU-4-C-1700 Hnedpfx Abewu Agco Nol Position 4: Gluing Machine BARBERAN-RFU-4-C-1700 Position 5: Continuous Cycle Presses BARBERAN-RFU-4-C-1700 Position 6: Panel Stacking and Offloading BARBERAN-RFU-4-C-1700

Condition: used, Year of construction: 2000, Used Rondo line. We also have the following items listed on the side. Hoba B.v. HSA 5 (year 2012), Kemper Multimatic (year 2004), Plus three Varimixer Bear ERGO Mixers (year 2003-2006) All these items are available together, plus the mixers for 60,000 EUR, plus packaging and shipping. Hedpfx Abex Swuco Njnl

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, We offer this used Kemper Multimatic spiral mixer, year of construction 2004. Hsdpfxox R Ugmo Ab Nenl Manufacturer: Kemper Model: Multimatic Year of construction: 2004 year Condition: used Category ID: 1005 Type ID: 187 Machine type: Dough line for hamburgers and hot dog buns We also have the following items listed on the side. Hoba B.v. HSA 5 (year 2012), Rondo ZGP665.C (year 2000), Plus three Varimixer Bear ERGO Mixers (year 2003-2006) All these items are available together, plus the mixers for 60,000 EUR, plus packaging and shipping. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: Hodpfjy Rflysx Ab Nsnl A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: used, Norpak Magazine Sorting and Polywrapping Line, Variable Size Infeed Hopper A4 - A5, In Leaf Capability, 4 Document Feeder A4 - A5, Poly Wrap Station with Heated Sealer Bars & Cut Off, Outfeed Conveyor, 8m x 3m Foot Print, Including Extraction System. S/No. 0701047 (Selection of Polywrap & Potato Starch film) Hsdpfx Aboy Sg S Ro Nenl Location: These lots are located in Aldridge, West Midlands, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Hjdpfoy R Tk Rex Ab Njnl Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Condition: like new (used), functionality: fully functional, gearing type: hydrostat, fuel type: electric, Year of construction: 2024, operating hours: 500 h, Complete uPVC Window & Door Fabrication Line – Ready To Operate Modern and clean fabrication setup suitable for manufacturing uPVC windows and doors. The line is in very good condition, fully functional and ready for immediate use. Manufactured by Özgenç Makina. Ideal for start-up business or expansion of an existing fabrication company. Hsdpfoy Sbu Tex Ab Nenl Setup includes: * Cutting and welding machinery * Corner cleaning equipment * Work tables and storage racks * Air compressor and accessories * Clean workshop environment * 3 phase ready setup Well maintained and lightly used. Can be sold as machinery only or together with the workshop setup by separate negotiation. Viewing welcome by appointment. Transport can be arranged at buyer’s cost. Serious enquiries only. Price is £34.590

Condition: used, Year of construction: 2002, DRAW-SIZE-WARPING LINE FOR FILAMENT YARNS TO PROCESS POY (FROM BOBBINS) INTO FULLY DRAWN SIZED WARP BEAMS : MAKE : SUCKER-MUELLER - HACOBA TYPE : NZB-Z WW : 180 cm YOC : 2002 ( USED ONLY 4 YEARS!, then stored ) SPEED : 500 M/ MIN EQUIPPED WITH : - WAXING ROLL - 2 HOT AIR DRYING CHAMBERS (1995) 150˚C - 9 STEAM DRYING CYLINDERS 180cm ( 1995) 130 ˚C - YARN TENSION CONTROL SYSTEM BY ‘TENSOSCAN’ - YARN DRYING CONTROL SYSTEM BY ‘PLEVA’ - YARN BREAKAGE INSPECTOR BY ‘CAMSCAN’ CREEL WITH BOBBIN CARRIAGE MAKE : ROSTONI TYPE : RCS/GB/1344 YOC : 1995 NO. OF BOBBINS : 1344 EQUIPPED WITH : - MOVABLE TENSIONER FRAME - EYE GUIDE BOARD - TENSION VARIATION SIZING KITCHEN MAKE : MARIOTTI & PECINI YOC : 2002 CAPACITY : 700 LITERS INOX TUB + INOX STOCK TUB 700 LITERS WITH ASSEMBY BEAMER 300CM MAKE : SUCKER-MUELLER TYPE : WN YOC : 1985 BEAMNING SPEED : 150 M/MIN WW : 300 CM BEAM DIA : MAX 1000 MM BEAM WIDTH : 3000 MM ( ROLL WIDTH 3200MM) - LEAVELING DEVICE SYSTEM ( FOR 8 SECTION BEAMS) - WITH TENSION CONTROL SYSTEM FOR WARPBEAMS Hnjdpey Spl Hofx Ab Njl - WITH 2 x DOUBLE DECK BEAM STAND FOR 10 BEAMS & 6 BEAMS BY SUCKER MULLER ( 1987) TYPE AB50

Condition: used, Year of construction: 2020, functionality: fully functional, Complete Used Peeling Line Complete used peeling line for sale, two available. This line was installed in 2020 and decommissioned at the start of 2025. Each line was previously doing up to 14 tonnes of product a week, can be used for potatoes, carrots, swede, parsnips etc. Each line consists of: Bin tipper dimensions (with frame) approx 2.670 m wide x 1.91m tall x 2.240 m long Large boat hopper. Conveyor belt width 500mm x belt length 1900mm long Elevator with hopper into peeler 3700mm high x 400mm wide Vegetable/potato batch peeler Waste water unit Surge tank with water sprayer Roller inspection table 900mm wide x 2.9m long Incline slatted conveyor Belt 400mm wide x 2800m long Hnjdswak Aiepfx Ab Nel Surge tank 600mm wide x 2.3m long Dip Wheel Drywhite container Weigher & bagger with metal detector Also includes waste conveyors and all associated control panels. This can be sold as two complete line, one complete line or as individual machines depending on your requirements.

Condition: good (used), For sale: Baking trays with gutters brand: SASA number of pieces in total: 550 baking trays total price: €25,000 dimensions: Length: 200 cm Hedpfsrt Uw Rex Ab Nonl width: 80 cm height: 5 cm gutter width: 9.5 cm number of gutters per plate: 21 gutters The baking trays come from a current Mecatherm Line See also the photos All as good as new and still provided with a Teflon layer and all the plate are stainless steel. Viewing is possible on location If you have any questions, we'd love to hear from you! Kind regards, Leo Holland for sale: baking trays with gutters brand: SASA total number of pieces: 550 baking trays total price: 25,000,- dimensions: Length: 200 cm width: 80 cm height: 5 cm width gutter: 9.5 cm number of gutters per plate: 21 gutters See also the photos All as good as new and still provided with Teflon layer and all plates are made of stainless steel The baking trays come from a current Mecatherm Line Viewing is possible on location If you have any questions, we would like to hear from you! kind regards, Leo Holland

Operating hours: 200 h, condition: ready for operation (used), functionality: fully functional, Complete Equipment Sale for Cheese/Dairy Production Hnedpfxey Rv Eds Ab Nel 1 - 500 l/h ATA brand pasteurizer, three-phase 1 - Horizontal cheese press, capacity for 48 kg, 4-position 1 - 150 l ricotta vat, three-phase 2 - 300 l refrigeration cabinets with three levels of separation 1 - 220 l coagulation vat, three-phase 1 - 150 l coagulation vat 2 - Hand wash sinks 2 - Work tables 1 x 1.70 m 1 - Vacuum machine 40 - Stainless steel cheese curing racks 0.64 x 0.52 m 2 - Rack trolleys for racks 1 - Stainless steel table with shelves 0.6 x 1.45 m 1 - Table with sink and sliding doors 0.6 x 1.45 m 3 - 30 liter aluminum cans 2 - 50 liter aluminum cans 1 - Boot washer 1 - 600 liter refrigerated milk tank

Condition: like new (used), Year of construction: 2020, Ficep Raz 601 (also known as Nozomi) Hnsdpfx Aoxq Rpnsb Nel Automatic 9-axis CNC thermal coping robot Section size [min. mm]: 80x10 Section size [max. mm]: 610x450 Plasma torch [qty]: 1 Infeed length: 16 m Outfeed length: 16 m

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, DG Line 6500 Automatic Perforating/Creasing Machine with Low Pile Feeder. Hnodoy Spaqopfx Ab Nsl The PIT STOP DG Line 6500 is perfect for companies offering print-on-demand services and requiring high-quality results from digitally printed materials, with fast and straightforward operation. The format is suitable for digital printing and also for book covers (books on demand) with an extension to 50×85 cm, or standard operation at 50×70 cm without the extension. Additionally, the PIT STOP DG Line 6500 can be equipped with a standard perforating kit (optional extra), which is programmable directly via the user display. Sheet Size Min / Max: 8×10 cm / 50×70 cm (extendable to 50×85 cm with optional feeder extension) Sheet Weight: 80 to 400 g.s.m. Programs: 20 programs with up to 20 operations each Minimum Creasing Distance: 0.1 mm A4 Production (1 crease): up to 6,500 sheets per hour Power Supply: 230 V, 50 Hz, single-phase Power Requirement: 2 kW Net Weight: 180 kg Dimensions: 150 x 75 x 120 cm

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: VD 07.08.469, type of input current: DC, We are selling our Kallfass shrink tunnel. The display is defective, but the rest of the machine is fully functional. Feel free to call if you have any questions. Hodsy Snw Iepfx Ab Nenl

Condition: used, Year of construction: 2011, Overview  This filling line for non-carbonated beverages in PET bottles was manufactured in 2011 and comprises a filtration system, a filling and capping machine, a labeling machine and a pallet wrapping machine. It is designed for bottle sizes from 1.5L to 5L. The line is being sold as the factory has been closed. All machines are professionally stored and can be inspected on site. Technical details  Filtration system | GYM Internacional | 8000 | 2011 Manufacturer: GYM Internacional Model: 8000 Year of manufacture: 2011 Capacity: 8,000 L/h Power consumption: 4 kW Dimensions: 2,500 x 1,500 x 100 mm Weight: 1,110 kg Bacteriological filtration through housing system Automatic filling monoblock | GYM Internacional | Grupo 9-1. PK | 2011 Bottle formats: 1.5L & 5L PET Output: 1,600 bottles/hour (1.5L) 700 bottles/hour (5L) Filling heads: 9 Capping heads: 1 (screw cap) Bottle diameter: Min. 120 mm, max. 300 mm Bottle height: 250-400 mm Direction of rotation: clockwise Power consumption: 3.5 kW Dimensions: 4,000 x 3,000 x 3,500 mm Weight: 2,500 kg Rotary labeling machine | NEWTEC | LEOPARD HM 720 F6 S1E1 | 2011 Output: 3,000 bottles/hour Dimensions: 2,750 x 1,700 x 1,780 mm Weight: 3,500 kg Pallet wrapper (semi-automatic) | ECOPLAT | ECOPLAT BASE | 2011 Capacity: 35 pallets/hour Type: Turntable Control system: PLC Max. Pallet weight: 2,000 kg Semi-automatic Dimensions: 2,439 x 1,500 x 2,580 mm Weight: 1,200 kg   Hodpfx Ajv E Haijb Nenl