Used Somab Transmab-500 for sale (16,095)

Condition: good (used), Renz Mobi 500 Semi-Automatic Spiral Binding Machine Perfect condition, manufactured in 2021. Only 3,636 bindings used. Semi-automatic spiral binding machine from the German company RENZ: Fpjdpfx Ajzur Hiofuon • Controlled by a touchscreen display • The fastest setting changes for various work formats in this class via an electronic panel, which is particularly important for small, frequently changing runs • Spiral diameter adjustment from 1/4″ to 1 1/4″ (6.9 to 32.0 mm) using a knob • KA-300 Hanger Feeder • Quiet operation. The machine does not require a compressor. • Working width: 105-500 mm • Mobile, easy to move • Includes a receiving table • No special operator training required 230V power supply Weight: 550 kg

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Fpjdjz Rn Nkopfx Afuon Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm Fsdpjz Ikq Dofx Afujpn - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,396 h, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothX, workpiece height (max.): 350 mm, total height: 2,840 mm, total width: 1,900 mm, table load: 200 kg, overall weight: 7,100 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2018. It features a maximum workpiece diameter of 500 mm and a maximum table load of 200 kg. The machine is equipped with a 19-inch colour touchscreen and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality simultaneous 5-axis machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • Cutting time (“cutting only”): 14,396 h 54 min • Working capacity and travels • Max workpiece diameter: 500 mm; height: 350 mm • A-axis tilt: -120° to +30°; C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis indexing time: 0.6 s per 90° • C-axis indexing time: 0.55 s per 90° / 1.05 s per 180° • Guideways: Roller linear guideways • Table and clearances • Tilting/rotary table with A and C axes • Table size: 500 × 400 mm • T-slot table (as specified in final configuration) • Spindle nose to table surface, table horizontal: 50–560 mm • Spindle nose to table, table vertical: 40–550 mm • Spindle • Spindle chiller; spindle cooling oil tank: 16 L • Programmable spindle orientation in 1° increments • Tool changer and magazine • ATC with recovery function; digital magazine display; external magazine operating panel • Tool selection: fixed magazine addresses with automatic shortest-path selection • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm; with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 s • Measuring and probing • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement function • Absolute positioning system • MAZA-CHECK system • Preparation for RMP600 workpiece probe • Coolant and thermal management • Through-tool high-pressure coolant (~15 kgf/cm² ≈ 14.7 bar), flow ~35 L/min • Coolant tank: 300 L • Coolant washdown system • Cooling for X/Y/Z-axis ball screws • Control and software • MAZATROL conversational and EIA/ISO programming; simultaneous 5-axis control in EIA/ISO • G00 Slope Constant; Smooth restart; Tilted machining plane; Inverse Time Feed • Extended work offsets: 300 pairs; Variable macros: 600 variables • Polar coordinate programming; Tornado machining cycle • High-speed machining and smoothing; Geometric compensation for rotary axes Fpedpfx Aez Ipzusfuen • Seamless Corner Control; Variable Acceleration Control • Interfaces: USB, LAN, SD memory card • Safety, enclosure, compliance • Full working-area enclosure with top cover • Interlocked operator door; working-area lighting • Intelligent Safety Shield (ISS) • CE marking • Automation/operation aids • Automatic machine power on/off and warm-up Additional equipment • Right-side hinged-belt chip conveyor for steel machining • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: good (used), Sumbel Herold 500 Gluing Machine This machine is like new, fully functional and ready for production. This is the most valued brand among small laminating machines. Ideal for producing covers, decorative packaging, and more. Made in Germany. The machine operates on hot glue. It features a built-in heating plate and a water bath. Brass rollers. Infinitely adjustable: glue thickness, gap width, and speed. Fodpezz Hh Ujfx Afujpn Working width: 500mm Power supply: 380V Weight: 60kg

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 90 mm, Clamping force 5000 kN Mould opening force, max. 279 kN Travel force movable platen opening 137,1 kN Travel force movable platen closing 116,8 kN Size of mould platens (h x v) 1370 x 1200 mm Distance between tie bars (h x v) 1000 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Fsdpfx Aoz I Dvyjfuspn Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 90 mm Ls/D ratio 20 Injection pressure 1839 bar Stroke volume 2290 ccm Shot weight (PS) 2084 gr. Injection rate 604 ccm/s Screw speed 195 1/min Plasticising rate max. 134,2 g/s Nozzle pressure 129,4 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Reservoir capacity 1175 ltr. Dimensions and weights: Dimensions of the machine ca. 8,00 x 2,52 x 2,40 m Total machine weight 28800 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pull on fix plate - 2 x core pulls on movable plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: good (used), Tranklein BRM 500 Book block rounding machine The machine is in very good condition, fully serviced and ready to use. Model with electric book thickness adjustment. Technical specifications: Maximum working size: 500mm Maximum book thickness: 120mm Speed: 300 cycles/h Power supply: 400V Weight: 300kg Easy to use, quick to set up. Fpsdpfjzw Raaex Afusn

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, total height: 2,840 mm, total width: 1,900 mm, overall weight: 7,100 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2020. It features a maximum spindle speed of 18,000 rpm and a rapid traverse rate of 30,000 mm/min. The machine includes a tool magazine capacity of 30 tools and a robust table size of 500 x 400 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • CNC control: MAZATROL SmoothX with 19-inch colour touchscreenWorking capacity and travels • A-axis tilt: -120° to +30° • C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis index time: 0.6 s per 90° Fedpfx Afez Iqgreuspn • C-axis index time: 0.55 s per 90° / 1.05 s per 180°Table and clearances • Tilting/rotary table (A/C axes) • Table size: 500 × 400 mm • Table with T-slots (as per final configuration) • Spindle nose to table surface (table horizontal): 50–560 mm • Spindle nose to table centre (table vertical): 40–550 mmSpindle • Spindle chiller with 16 L cooling oil tank • Programmable spindle orientation in 1° incrementsTool magazine and ATC • ATC with recovery function; digital magazine display and external operating panel • Tool selection: fixed addresses with automatic shortest-path selection • Pull stud: Yamazaki ANSI • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm • Max tool diameter with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 sMeasuring and probing • Renishaw RMP600 radio workpiece probe • MAZA-CHECK system • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement • Absolute positioning systemCoolant and chip management • Through-tool high-pressure coolant: approx. 15 kgf/cm² (≈14.7 bar), approx. 35 L/min • Coolant tank: 300 L • Coolant washdown system and manual washdown gun • Cooling for X/Y/Z ball screws • Workpiece air blastControl and software • MAZATROL SmoothX CNC • EIA/ISO programming package • Simultaneous 5-axis control • Additional 5-axis machining package for SmoothX • 3D coordinate rotation • Smooth synchronous tapping • G00 Slope Constant (rapid optimization) • Smooth restart • Tilted machining plane • Inverse Time Feed • Extended work offsets: 300 pairs • Variable macros: 600 variables • High-speed machining and smoothing • Geometric compensation for rotary axes • Interfaces: USB, LAN, SD cardConstruction, safety, and other features • Electronic handwheel • Three-colour signal tower • Automatic machine power on/off and warm-up • Roller linear guideways • Full enclosure with top cover; interlocked operator door • Work area lighting • Intelligent Safety Shield (ISS) • CE marking Additional equipment • CROWTHER right-side hinged-belt chip conveyor (for steel machining) • GX500 mist extraction unit with extraction preparation • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: repair required (used), Year of construction: 1997, functionality: fully functional, power: 18 kW (24.47 HP), type of cooling: air, manufacturer: BECKER Type: rotary vane vacuum pump Model: DTLF 500 Year of construction: 1997 Order number: 1475879 NOTE: rotor blades need to be replaced. electric motor ELEKTRO ADDA Speed: 980 min-1 Rated power: 18.5 kW Fpsdpfxevmhqre Afuon Input power: 500 m3/h Rated pressure: 800 mbar Rated vacuum: 0 mbar Attachment: FC200LT/6 Manufacturer: ELECTRO ADDA Type: MotoR Motor voltage [V]: 380/690v Current [A]: 38.5 Motor voltage [V]: 380-690 Rated speed [rpm]: 970/1170 Weight: ca350kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, Clamping force: 4,900 kN Operating pressure: 206 bar Heating plate dimensions: 700 x 700 mm Fpedpfxoz N E A Eo Afusn Piston diameter: 558.8 mm Stroke: 250 mm Daylight opening: 300 mm Max. weight of the heating plates: 560 kg Oil tank: 1,100 L Rated power: 82 kW Heating power: 56 kW Vacuum motor power: 4.0 kW Light curtain, distance to the tool area: 810 mm Stroke of the vacuum cover: 200 mm Machine dimensions: 3,975 x 2,935 x 2,555 mm Equipped with an overhead crane (monorail) with three chain hoists Manufacturer: STAHL Year of manufacture: 2011 Lifting capacity: 3 x 400 kg Length of the overhead crane: approx. 3,500 mm Mobile carriage Lifting capacity: 400 kg Lifting height: 3,000 mm Lifting speed, main lift: 4 m/min Lifting speed, fine lift: 1 m/min The vulcanizing press from the manufacturer PAN STONE was used by a renowned German company in the sealing technology sector. This company is known for its high quality and innovation in sealing production. It has always been professionally maintained and is in good condition.

Condition: used, Year of construction: 2018, Machine no. 6, serial no. 245127, control system, manufacturer Arburg Selogica, clamping force 500 kN, screw diameter 20 mm, handling system, manufacturer TecnoMatic, type micro cnc, on-machine dryer, manufacturer Piovan, type DPA20, conveying device, serial no. 5012216, year of manufacture 2017. Fsdpfx Afsz Hl Hdjuspn

Condition: like new (used), load capacity: 500 kg, arm reach: 2,550 mm, ROBOTIC ARM BRAND: ABB MODEL: IRB 7600 - 500 / 2.55 TECHNICAL SPECIFICATION PAYLOAD: 500 KG MAX. REACH: 2550 MM CONTROLLER: IRC 5 Fpedpfx Aez I I Tpsfuen

Year of construction: 2015, condition: excellent (used), Exceptional Opportunity! From the former collection of the Max Planck Institute in Freiburg, we can offer you this highly efficient gene sequencing system, model "NextSeq 500," from the world-renowned brand "illumina." Fjdpfx Afez Rph Ijuopn This system is one of the most powerful and widely used fully automatic gene sequencing systems, and it has become indispensable in virtually every laboratory worldwide. It is primarily used as a high-throughput system for the automated generation of DNA clone clusters through sequencing and primary analysis. Thanks to its particularly compact design, it is also perfectly suited for smaller laboratories and can be used ideally as a stand-alone device – all the necessary components are already integrated into the device, and complete operation can be performed via the built-in screen and a wireless keyboard. The device was acquired by the Max Planck Institute in 2016 and has been used very little. It has been continuously serviced by the manufacturer's customer service department and has only completed 395 runs – it is therefore in flawless condition both visually and technically – see the pictures. The device can be used immediately; however, for the sake of good order, we would like to point out that in a commercial operation, the legally required tests according to MTK/STK must be carried out again. Dimensions (H x W x D): approx. 585 x 534 x 635 mm Weight: approx. 85 kg The total weight of the system, including accessories and pallet, is approximately 110 kg! The device can be picked up from our premises during regular opening hours after prior telephone arrangement. For an additional charge, shipping can be arranged within three working days after payment receipt, insured via a shipping company. The sale is exclusively to commercial businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; a direct commercial sale to private individuals is expressly not permitted! The goods are sold excluding any warranty or liability for defects. The exclusion does not apply to claims for damages arising from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body, and health. If you have any questions regarding prices or technical details, please do not hesitate to contact us at the address provided.

Condition: used, Year of construction: 2019, operating hours: 196 h, functionality: fully functional, machine/vehicle number: W09D013KWKAD43636, operating pressure: 500 bar, total length: 2,910 mm, high-pressure hose length: 500 mm, total height: 1,770 mm, total width: 1,720 mm, pressure: 500 bar, empty load weight: 760 kg, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 760 kg, water tank capacity: 300 l, fuel tank capacity: 70 l, power: 13 kW (17.68 HP), temperature: 95 °C, volume flow: 0.9 m³/h, noise level: 104 dB, pressure (max.): 500 bar, Equipment: chassis, crane, This well-maintained DYNAJET 500th 15 HELI hot and cold water high-pressure unit is available for immediate delivery. Manufactured in 2019 and having only 196 operating hours, the machine is in excellent condition and is being delivered fully serviced, fully functional, and ready for operation. Designed for demanding industrial cleaning applications, the DYNAJET 500th 15 HELI combines powerful cleaning performance with compact dimensions, low weight, and excellent mobility. With an operating pressure of up to 500 bar and hot water temperatures up to 95°C, the machine is ideally suited for removing heavy contamination, coatings, grease, and industrial residues. The unit is equipped with a reliable Kubota diesel engine, integrated hot water system, and a large 300-litre water tank for independent operation even where external water supply is limited. The trailer-mounted design ensures maximum flexibility and easy transportation between jobsites. To ensure many years of reliable operation, the machine will be supplied with a brand-new 50 m high-pressure hose. A turbo nozzle and standard flat-jet nozzle are included in the sale. Key features and advantages: * Year of manufacture: 2019 * Only 196 operating hours * Fully serviced before delivery * Fully functional and ready for operation * Maximum operating pressure: 500 bar Fpodpfx Afjz Nd Ndousn * Flow rate: up to 15 l/min * Hot water temperature up to 95°C * Powerful Kubota 3-cylinder diesel engine * Integrated hot water system with high-performance burners * 300-litre integrated water tank * Approx. 70-litre fuel tank * Trailer-mounted unit with overrun brake * New 50 m high-pressure hose included * Turbo nozzle included * Standard nozzle included * Compact, robust and easy to transport *Ideal for industrial cleaning, surface preparation and professional service applications Please contact us if you are interested or would like to receive further information, pricing details, additional photos, or arrange a viewing of the machine. We will be pleased to assist you.

Condition: like new (used), Year of construction: 2024, Ref: 11139 . 2024 Horizon BQ-500 PUR Ice Binder Latest model Horizon BQ binder - Like new condition! Only 68,500 books! Comprising: BQ-500 Ice binder with hand feed station and 4 clamps Height adjustable LCD colour touchscreen for full automation of the following areas: Fjdpfx Ajz Elufsfuopn • Main clamp book width • Milling head • Spine glue length • Cover size & scoring • Cover nipping unit • Book delivery width Milling & roughing unit with dust bag extraction PUR spine gluing tank EVA hotmelt side gluing discs with glue length cut-off Auto suction cover feeder with scoring and double sheet detection Including tools & manuals. Accessories: Auto calliper book measuring device, for quicker make-ready. Specification: Book size, Max: 320 x 320 mm Min: 145 x 105 mm Open cover size, Max: 320 x 670 mm Min: 135 x 225 mm Book thickness : 1 to 65 mm Mechanical speed, Max: 1,350 cycles/hr. Including accessories, tools & manuals.

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Fpodpfx Aoz Iz Hpjfusn Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: excellent (used), CERTUSS Universal 500 TC. 500 kg/h. 10 bar. Rapid steam generator Fpodpfx Afoxqr D Tousn

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition. The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good cosmetic condition. The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideal for reliable production. Fpsdpfjyrqpfox Afuen Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator output 60 amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 30.09

Condition: good (used), Year of construction: 2010, Weinig Powermat 500 Number of spindles: 6 Year of manufacture: 2010 Fpedpoz Hm R Dofx Afujn Planing width: 230 mm Planing height: 120 mm Feed rate: 5 - 30 m/min Feed motor: 4 kW Infeed table length: 1,000 mm 1 driven toothed roller in the table 2 driven smooth rollers in the table Spindle 1: round, 40 mm Spindles 2-3-4-5-6 with HSK mount Powercom Control Spindle arrangement: Bottom: 11 kW Right: 7.5 kW Left: 7.5 kW Top: 15 kW Top: 11 kW Bottom: 11 kW

Year of construction: 2007, condition: good (used), ISO ALPHA 500 – Danish trolley stacking and destacking machine Efficient and user-friendly machine for the automatic assembly and emptying of Danish trolleys. Ideal for companies looking to optimize their logistics processes and reduce labor costs. The machine is equipped with a base destacker. An operator simply places the four posts into the trolley, after which the trolleys are automatically assembled and filled with the desired number of shelves. The ISO ALPHA 500 can also be used for dismantling trolleys. The shelves are removed from the trolleys fully automatically, ensuring fast and ergonomic processing. Key features: Fully automatic filling of Danish trolleys Adjustable number of shelves per trolley Includes base destacker Also suitable for automatic emptying of trolleys Efficient and labor-saving Fjdpfx Aoz Rcfmefuspn The price has recently been significantly reduced. The machine must be dismantled by the buyer. Location: Bleiswijk. A versatile solution for both assembling and dismantling Danish trolleys. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, power: 2.21 kW (3.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 410 mm, cutting width (max.): 480 mm, control type: manual, roller diameter: 500 mm, pivoting range: 46 °, actuation type: electric, rotational speed (max.): 900 rpm, overall weight: 250 kg, table height: 850 mm, SAC BW 500 Band Saw For sale is a robust SAC BW 500 band saw for professional woodworking. The machine impresses with its solid construction and generously sized work table. The band saw table is made of gray cast iron, heavily ribbed, precisely planed, and adjustable in angle. The band saw features mechanical height adjustment, a blade tension indicator, and an upper precision band saw guide. The parallel fence can be used on both the left and right sides of the band saw blade. Features: - Manufacturer: SAC - Model: BW 500 Fjdpfx Afjz Ig Ryeuopn - Wheel diameter: 500 mm - Cutting width: up to approx. 480 mm - Cutting height: up to approx. 410 mm - Table size: 550 x 700 mm - Table height: approx. 850 mm - Band saw length: approx. 4,100 mm - Blade dimensions: 25 x 4/10 mm - Wheel speed: 900 rpm - Motor power: 3 HP - Mechanical height adjustment - Blade tension indicator - Rubber tires - Adjustable gray cast iron table - Dust extraction port - Upper precision band saw guide - Telescopic guard - Motor protection switch with undervoltage release - Electrical system according to VDE 0113 - Parallel fence can be used on both sides The technical specifications correspond to the SAC product brochure for the BW 500. It describes, among other things, the solid gray cast iron construction of the wheels and the table, as well as the rubber tires for smooth and precise operation. sac_bw_de The machine is in used condition, with signs of wear consistent with its age. Ideal for carpenters, joiners, and woodworkers looking for a solid and durable band saw. Inspection and test run possible by arrangement.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 641/302, total width: 600 mm, total length: 800 mm, total height: 1,300 mm, overall weight: 120 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe between November 16, 2026, and November 26, 2026! MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 30 A Connected load: 8.1 kW Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 1,300 mm Weight: 120 kg External Reference: Steinbach & Holler - Lot 62 Fpodpfx Asz Il Ikofuen

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Fpsdpfxoyhnuke Afuon Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: good (used), Year of construction: 2008, functionality: fully functional, overall weight: 5,000 kg, CNC machining center WEEKE OPTIMAT BHX 500, including material loading system "IgeL-ROBOT" Workpiece support (bottom) Workpiece support (top) Workpiece length: min. 250 - max. 2500 mm Workpiece width: min. 70 - max. 1000 mm Workpiece thickness: min. 4 mm – max. 80 mm Fodpoyyb N Hofx Afuspn Workpiece stacking: max. 2 pieces Vector speed: X-axis, clamping jaws = 138 m/min; Y-axis = 80 m/min; Z-axis = 50 m/min Tooling (top and bottom): VERTICAL DRILLING UNIT 2 V 21 HIGH SPEED 7500 HORIZONTAL DRILLING UNIT 2H4X / 2Y NOTCHING UNIT N2 X-Y 90 MILLING UNIT F2-ETP-6 KW Barcode scanner, manufacturer: Datalogic

Year of construction: 2022, condition: used, KOLBUS Box Line Assembler BLA 500 year 2022 For assembling box cases and boxes or box cases and flat blanks. Overview: BLA 500 box line assembler CP 500 blank placing module BP 200 twin box placing module (year 2019) BP 500 box placer SG 500 side gluer Configuration: Fpjdpfx Afsz E Npajusn BLA 500 box line assembler · copilot system with touch screen · device for gluing box cases · servo-controlled drive technology based on Siemens technology · infeed with cardboard feeder CF 500 · delivery via conveyor belt Technical specifications: mechanical speed: up to 40 cycles/min box case width max.: 735 mm box case width min.: 205 mm box case height max.: 525 mm box case height min.: 140 mm box case thickness max.: 4,0 mm box case thickness min.: 1,5 mm CP 500 blank placing module · module for placing flat blanks on glued box cases Technical specifications: flat blank width max.: 800 mm flat blank width min.: 200 mm flat blank height max.: 800 mm flat blank height min.: 200 mm BP 200 twin box placing module (year 2019) · module for placing two boxes on glued box cases Technical specifications: box width max.: 170 mm box width min.: 100 mm box height max.: 42 mm box height min.: 20 mm box length max.: 250 mm box length min.: 100 mm cardboard thickness max.: 4,0 mm cardboard thickness min.: 1,5 mm spacing between boxes max.: 405 mm spacing between boxes min.: 140 mm BP 500 box placer · module for placing boxes on glued box cases Technical specifications: box width max.: 310 mm box width min.: 65 mm box height max.: 170 mm box height min.: 20 mm box length max.: 400 mm box length min.: 130 mm cardboard thickness max.: 4,0 mm cardboard thickness min.: 1,5 mm SG 500 side gluer · module for raising and gluing the sides of the box case to the box Technical specifications: box case height max.: 405 mm box case height min.: 140 mm