Used Special Edge Sander for sale (15,384)

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch Iedpfxoudxchs Ag Aotn TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 2023, working width: 3,000 mm, - Year of manufacture CombiDisc: 2025 - Year of manufacture Cataya: 2023 - Transport width: 3 m - Transport height: 1.56 m - Overall length: 1.87 m - Number of discs: 2 x 12 m - Disc thickness: 4 mm Itedpsz Na Uzsfx Ag Aen - Disc diameter: 410 mm - Cutting angle: 1st row of discs: 14° / 2nd row of discs: 12° - Working depth: 3 - 8 cm - Working speed: 8 - 15 km/h - Power requirement from / to: 59 kW / 80 hp to 205 kW / 280 hp - Basic unit with integrated QuickLink quick-coupling system - 3-point linkage Cat. 2 or Cat. 3 - Pivoting disc assembly with manual adjustment of the working depth - Maintenance-free stone protection via rubber suspension elements - Adjustable disc carriers for the tractor track and the edge area - Maintenance-free disc bearing with sliding seal - Two adjustable side plates - Operating manual - Finely toothed disc assembly - Hydraulic depth adjustment - Mounting frame for row loosening - Spring-mounted tractor track loosener - Three-point extension 150 mm - Cat. 3 - Front lighting for road use - Electric metering drive 3000 left - Electric calibration with calibration button - Rear lighting for road travel - Front lighting for road use - 24 RoTeC shares for Cataya 3000 Special - Depth guide roller Control 25 - Manual share pressure adjustment - Hydraulic top link (short) - Exaktstriegel 3000-125 - Mounting kit Exaktstriegel adjustable - Amadrill 2 - International radar sensor - Mounting kit radar sensor - Analog work position sensor

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n Itedpfxohy Tlrs Ag Ajn double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. Itsdpfxstwzyfj Ag Asn - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Itodpfx Agod R Ev De Ajn Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Sandwich construction, roof vent Equipment: - 4 urinals - 4 toilets Net price: 32,596.64 € / Gross price: 38,790.00 € Article number: WCE227562122.01 Technical data: • Brand: Vezeko • Model: WC E 27.56 • Vehicle type: Special trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 563 x 217 x 223 cm • External dimensions (LxWxH): 714 x 232 x 298 cm • Permissible total weight: 2,700 kg • Unladen weight: 2,276 kg • Payload: 424 kg • Chassis: Low-loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • High-quality grey PVC flooring • 4 stable heavy-duty crank supports incl. crank for secure positioning • LED exterior lighting for the entrance area • Concealed pipe routing • Two-part side wall flap consisting of a fold-out stair area and a fold-out canopy for the entrance area Itjdez Ri Egspfx Ag Aen • 3-step staircase made of aluminum tread plate incl. lifting aid • Fold-out and lockable side railing on the left and right next to the staircase • Low-frame chassis with 10-inch tires ensures comfortable access • Sturdy sandwich panel body with 50 mm polyurethane core and hot-dip galvanized and powder-coated outer and inner walls (insulated) • Exterior color: silver • 3 service flaps on the driver's side • 4 stable maneuvering handles • Lockable doors • Rear frame and edge profiles made of special aluminum profiles • Additional reinforced automatic support wheel • Reversing assistance system • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • _____ • Women's area equipment: • 3 toilet cubicles, each with a water-flushing, wall-mounted toilet • 1 stainless steel toilet paper holder per cubicle • 1 washbasin with double sink incl. cabinet for additional storage space • 2 sensor-operated faucets ensure contactless use • 10-liter hot water boiler • Paper towel dispenser • Roof hatch with integrated fly screen and sun protection • LED interior lighting • Electric heating • Large mirror above the washbasin • Floor drains for easy interior cleaning • _____ • Men's area equipment: • 1 toilet with a water-flushing, wall-mounted toilet • 1 stainless steel toilet paper holder • 4 urinals with contactless automatic flushing • Partition walls between the urinals • 1 holder for toilet paper rolls in stainless steel • 1 washbasin with double sink incl. cabinet for additional storage space • 2 sensor-operated faucets ensure contactless use • 10-liter hot water boiler • Paper towel dispenser • Roof hatch with integrated fly screen and sun protection • LED interior lighting • Electric heating • Large mirror above the washbasin • Floor drains for easy interior cleaning • _____ • Technical room equipment: • Fuse box • Power inlet 400V 16A incl. 20m cable • Fresh water connection incl. GEKA coupling in 3/4 inch, incl. 20 m hose • 110 mm outlet pipe

Condition: used, machine/vehicle number: 008710, Max. machining width: 1300 mm Working Table: Fixed pass height Vacuum feed belt: yes Isdpfxjztat Uo Ag Aetn No. Operating units: 3 Nr

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16 Iodpfx Agswuz Eko Astn

Condition: new, Year of construction: 2026, The robust design also allows for the processing of longer workpieces. The grinding unit can be swivelled, making it suitable for use as an edge grinding machine. Large, balanced belt pulleys (225 mm) ensure low-vibration operation. Simple adjustment of the grinding belt. High belt speed of 17 m/s. Reversible rotation (right/left). Upper grinding platen with graphite coating. Grinding shoe with 4-point suspension. Equipped with a movable grinding shoe for grinding angled surfaces. Smooth-running work table, even under heavy loads from large workpieces. Iodpfxjff Hdfs Ag Ajtn Optimal price-performance ratio. Additional ESE equipment: Standard with electric table height adjustment. Split table that can be folded out for special edge grinding applications. Drawer-type grinding attachment. Integrated work table lighting. Equipment details: Large, balanced belt pulleys (225 mm) ensure optimal and low-vibration operation. Belt speed: 17 m/s. Equipped with a swivelled professional grinding shoe for grinding angled surfaces. 4-point suspension. Standard with electric table height adjustment. Controls ergonomically arranged on a separate control panel. Standard with drawer-type grinding attachment. Split table that can be folded out for special edge grinding applications. Dimensions and weights: Length approx. 3750 mm Width/Depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection. Dust extraction port diameter: 160 / 160 mm Work table(s): Work table height adjustment: 550 mm Work table traverse: 690 mm Electrical data: Power of height adjustment motor: 0.37 kW Power of drive motor: 3.0 kW Connection voltage: 400 V Phase(s): 3 phases Type of current: AC Mains frequency: 50 Hz Grinding unit: Grinding belt length: 7000 mm Grinding belt width: 150 mm Belt speed(s): 17 m/s Grinding shoe length: 270 mm Grinding shoe width: 150 mm

Condition: new, Year of construction: 2026, Hebrock F 4 For the complete processing of your panels For those who don’t want to compromise. With the F 4, we offer you a model that allows you to produce completely finished edges on a machine length of only 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction nozzle: Ø 1 x 140 mm PLC control with 10″ touchscreen Top-mounted rapid heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner router) Optical display for workpiece sequence Outrigger (extendable to the front) Quick-change unit preparation, including glue change device for PUR processing Surface scraping blade with dual contact Pneumatic roller capping (scissors-type design, Hebrock system) Double roller pressure (ball-bearing mounted) Transport chain with permanently screwed-on special chain plates Edge router Routing unit Ijdpohqadcofx Ag Aotn Miter saw Corner router Accessories: F4/09 Radius scraping blade (incl. pneumatic lift) F4/09/4 Multi radius scraping blade (R1/R2) F4/30 Pneumatic 3-point adjustment Location: In stock, 54634 Bitburg - available on short notice -

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, MACHINE IS EXCELLENT CONDITION DAILY WORKING IN THE PRODUCTION max 2-3 hours , MACHINE WILL BE REPLACED WITH BIGGER NEW MACHINE MACHINE IS AWAILIBLE IMEDIATELY. TECHNICAL DATA IS PRESENT ON PHOTOS WORKING STATIONS: TECHNICAL DATA: 1. Left+right cutter 2. Roller glue application 3. Front and rear saw 4. Straight cutter also for solid laminates 5. ⁠Angle cutter Itodovi Rd Tepfx Ag Asn 6. ⁠Rondomat front, rear, top, bottom 7. ⁠Straight wedge cutter 8. ⁠Wedge cutter with radius 9. ⁠ Dryer WE SHIP MACHINE WORLD WIDE FOR THE CUSTOMERS MACHINE LENGHT APPROX 7 METERS WEIGHT : 3500 KG

Condition: good (used), Year of construction: 1981, Ural 375D | 6x6 | Off-road drive | Military vehicle. For sale: the legendary Ural 375D – a reliable military truck with a 6x6 drive, designed to operate in the most challenging off-road conditions. - Imported from Germany, complete documentation available. - New tarpaulin. • Engine: V8 gasoline ZIL-375 (7.0L) • Power: approx. 180 hp • Drive: 6x6 (with axle disconnect capability) • Transmission: 5-speed manual • Off-road tires in good condition • Central tire inflation system • Cargo bed with tarpaulin Iodpfx Aez Sk U Tog Astn Starts without any problems, ideal for collector's purposes, off-road expeditions, military shows, or as a base for conversion (e.g., an expedition camper).

Condition: new, Edge sanding machine KSO 1505 Holzkraft -Exhibition machine- - Dust extraction port diameter: 100 mm - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm - Connection voltage: 400 V - Mains frequency: 50 Hz - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding area length: 1010 mm - Sanding area width: 190 mm - Maximum sanding height: 170 mm - Swivel angle of sanding unit: 0 – 90 ° - Maximum workpiece width: 1010 mm - Maximum workpiece height: 150 mm Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg -1x sanding belt 2750x150mm, grit 80 -1x sanding sleeve Ø38mm, grit 80 -1x sanding sleeve Ø50mm, grit 80 Iodpevxkv Usfx Ag Aotn -1x sanding sleeve Ø75mm, grit 80 - New exhibition machine -

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Itodpfshqb Rcex Ag Aen Location: Available from stock in 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, overall weight: 2,500 kg, grinding height: 200 mm, The machine is equipped with the following processing units (further details can be found in the attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 1. Sanding roller in grooved steel design 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 2. Sanding roller in grooved steel design 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 3. Sanding roller, 85 Shore TECHNICAL DETAILS Sanding height: 3 - 200 mm Itedpfx Aez Hxnbog Aon Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min MACHINE DETAILS Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Motor voltage: 50/60 Hz Electrics: 3x400V 50Hz CE version Vacuum table with blower: 4 kW (5.5 HP) Reversing function: 3 Weight: 2,500 kg EQUIPMENT Feed table with electric height adjustment 3 motors: 18.5 kW (25 HP) each with SD start sanding belt brake Touch screen control with color display Additional extraction connection Note: The machine is delivered without a power cable. The electrical connection must be provided on site.

Condition: excellent (used), Year of construction: 2018, operating hours: 4,832 h, functionality: fully functional, machine/vehicle number: 2017058, total length: 7,000 mm, total width: 1,800 mm, overall weight: 5,650 kg, Montresor LOLA 10.8 DX edge grinding machine • Belt running direction: RIGHT to LEFT, year of manufacture: 03/2018, #2017058 • In excellent optical and technical condition – only 4,832 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 3 pneumatic lower and 3 upper chamfer supports • Belt infeed: motorized calibrating/profiling support • Belt outfeed: motorized water-jet support • Automatic centralized oil and grease lubrication • Double-row table extension console • Space requirement approx.: 700 x 180 cm, infeed and outfeed path: 200 x 60 cm Optional services available, such as: freight, installation, and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, does not include tools, attachments, and accessories; items shown in the pictures are not included with the machine/scope of delivery. Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold "as is" with exclusion of all warranty claims Inspection possible • at the facility near Rosenheim Availability Itsdpfxjz Rk E Uo Ag Ajn • after delivery of the new machine, approximately January/February 2027

Condition: used, total width: 1,800 mm, total height: 2,320 mm, total length: 1,700 mm, Year of manufacture: 1999 Colour: White Empty weight: 2.500 kg - Year: 1999 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 99125681 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Top - - Type of unit: Contact roller - - Sanding belt length [mm]: 1890 - - Sanding belt width [mm]: 1110 - - Roller diameter [mm]: 175 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Top - - Type of unit: Contact roller Itjdpfx Ajzr Hx Usg Aon - - Sanding belt length [mm]: 1890 - - Sanding belt width [mm]: 1110 - - Roller diameter [mm]: 1750 - - Roller material: Rubber - - Motor power [kW]: 18.5 - Max. working width [mm]: 1100 - Min. working height [mm]: 30 - Max. working height [mm]: 183 - Infeed table length [mm]: 400 - Outfeed table length [mm]: 250 - Feed motor [kW]: 0.75 - Voltage [V]: 380 - Current consumption [A]: 36 - Fuse [A]: 63 - Transport dimensions: 1700mm x 1800mm x 2320mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. The four sanding stations Iodpfx Aefig Rwsg Aotn 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: used, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Year of manufacture: 2013 Itedpfxsyrp Uae Ag Aen Weight: 6.000 kg - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: Nordson - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, ALTENDORF Model F 2 Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges from the start: diamond-tipped jointing cutters ensure workpieces are excellently prepared for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling cutter. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Itedpel D Rp Ejfx Ag Ajn Feed rate approx. 10 m/min Equipment: F2 next edge banding machine With PLC control (incl. touchscreen) Hot-melt adhesive application to the workpiece for edging material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change option incl. glue discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter head (combination version) Robust chain drive Ball-bearing double pressure roller Viewing window from the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (for radius, chamfer, or flush trimming) F2/27 nesting for milling stations

Condition: used, total height: 2,200 mm, total length: 5,350 mm, total width: 1,200 mm, Year of manufacture: 2018 Colour: White Weight: 3.500 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - Serial number: 1000022855 - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - - Tools available: Yes - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 3 - Edge band height [mm]: 64 - Min. panel thickness [mm]: 10 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 85 - Max. panel width [mm]: 3200 - Min. panel length [mm]: 140 - Max. panel length [mm]: 3200 - Min. feed speed [m/min]: 12 - Max. feed speed [m/min]: 18 - Feed speed control: Variable - Left or right-sided: Yes - Max. spindle speed [rpm]: 12000 - Voltage [V]: 400 - Current consumption [A]: 20 - Fuse [A]: 32 - Power [kW]: 11.0 - Transport dimensions: 5350mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iodpfozw El Rex Ag Aotn Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2021, operating hours: 2,608 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 06421, COMANDULLI EDILPLUS 8+6 DX model Belt running direction: RIGHT to LEFT, year of manufacture 2021, #06421 Itjdpfsz Rk Hfox Ag Asn • Annual maintenance last performed on 10/08/26 – only 2,608 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 2 pneumatic lower and 2 upper chamfer supports (height-adjustable) • Belt infeed: Calibration/profile support, both axes motorized • Pneumatic finishing/stock support • Belt outfeed: Water nozzle support, both axes motorized • Automatic centralized lubrication system • Table extension console, double-row • Space requirement approx.: 630 x 180 cm, infeed and outfeed area: 300 x 60 cm Optional services available, such as: freight, installation and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories in the pictures are not included in the machine/scope of delivery Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold as is, with no warranty of any kind Inspection possibility • at the operating site near Bitburg Availability • after delivery of the new machine, approximately February 2027

Condition: used, total height: 1,670 mm, total length: 6,000 mm, total width: 1,410 mm, Year of manufacture: 2020 Colour: Grey Weight: 2.200 kg - Year: 2020 - CE marking present: Yes - Serial number: 20.082 - Number of units [pcs]: 10 - └ 1st unit type: - - Tools available: Yes - └ 3rd unit type: - - Tools available: Yes - └ 4th unit type: - - Tools available: Yes - └ 5th unit type: - - Tools available: Yes - └ 6th unit type: - - Tools available: Yes - └ 7th unit type: - - Tools available: Yes - └ 8th unit type: - - Tools available: Yes - └ 9th unit type: - - Tools available: Yes - └ 10th unit type: - - Tools available: Yes - Voltage [V]: 400 - Power [kW]: 16.2 - Transport dimensions: 6000mm x 1415mm x 1670mm (l x w x h) - Transport weight [kg]: 2200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Ijdsx Hfyiopfx Ag Aotn

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Total length 3700 mm Feed speed 8 m/min. Ijdpez St Smsfx Ag Ajtn Weight 850 kg

Condition: good (used), - Used machine - Passage width: 1100 mm Ijdez Tflnjpfx Ag Aotn - Passage height: 3 - 160 mm - 1st unit: Contact roller - 2nd unit: Grinding shoe - Grinding belts: 1120x1900 mm - Motor power: 15.0 kW - Feed rate: 5 - 25 m/min - LxWxH: 1910 x 1570 x 1920 mm - Weight: 2500 kg - Ex works