Used Stöckel Fx60/30 Sps for sale (25,614)

Condition: good (used), functionality: fully functional, Data : Continuous drilling capacity in ST 60 30 mm Iedpfx Aijzl Exms Rjtk 12 speed levels 60 - 2240 rpm Spindle motor 1.1 / 1.6 kW . Projection approx. 320 mm Spindle stroke 170 mm Column diameter approx. 120 mm .

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2104796, GEM F470 automatic cardboard box sealer with automatic LATCH LOCKING FOR CONSTANT CARDBOARD FORMAT incl. centering unit and PLC S7 Siemens control system BOX DIMENSIONS: - Length : min. mm. 150 - max. mm .600 - Width : min. mm. 100 - max. mm. 520 - Height : min. mm. 100 - max. mm. 670 TECHNICAL DATA: - SPS Siemens S71200 control - Centering unit infeed RCC500 - Drive & guide belts Vertical - Carton format setting Manual - Bottom & lid sealing unit - Standard version T22 / T23 - Tape width From 50 to 50 mm depending on the unit - Tension adjustable - Max tape roll diameter 360mm - Core tape roll 76mm - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. Itedpfx Aieykugxj Rjk - Average production 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm. 2,470 x 990 x 1,782H - CE safety protection: side sheet metal covers with access door, supplemented with infeed doors L 850 mm, top and bottom cover. Illustration may contain options subject to surcharge

Condition: used, Year of construction: 2009, functionality: fully functional, Horizon HT-30 (2009) – USED Type: Three-side Trimmer Language: Japanese Total Counter: 1743573 Technical Specifications • Untrimmed Book Size (Max./Min.): 320 × 235 mm / 200 × 134 mm • Finished Book Size (Max./Min.): 305 × 230 mm / 200 × 134 mm  – Minimum finished size with the optional cutting table (cutting module): 148 × 134 mm • Trimming Width: 2.0 – 99.9 mm • Trim Thickness: Max. 51 mm • Book Stack Height: Max. 300 mm • Production Speed:  – Up to 440 books/hour (25 mm thick, 2 books stacked)  – Up to 500 books/hour (10 mm thick, 5 books stacked) Itodsztlyyspfx Ai Rsk • Power Requirement: 3-Phase 200 V, 50/60 Hz

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. Itedpfx Aiszmd Uis Rjk The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Weiler C30 Cycle Lathe (2011) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2011 Condition: very good, used, optional with new maintenance before delivery Center distance 750 Swinging diameter over bed 330mm Swinging diameter over cross slide 160mm Travel of cross slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027, size 5 Spindle diameter in the front bearing 70mm Spindle bore 40.5mm Internal taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7kW Total speed range 1 – 4,500 rpm Feed force longitudinal 6,000N Feed force facing 3,000N Feed range 0.001 – 10 mm/rev Rapid traverse rate longitudinal/facing 6/3 m/min Metric threads 0.1 – 400mm Inch threads 56 – 1/4 G/inch Module threads 0.125 – 28mm DP threads 224 – 1 Dp Max. number of thread starts 99 Tailstock diameter 50mm Tailstock travel 130mm Internal taper of the tailstock MK3 Length 1750mm Width 1350mm Height 1670mm Weight 1300kg Itsdpfx Aeztyqmsi Rek Scope of delivery Chuck Multifix including 17 tool holders Machine lamp Coolant system Machine feet Original documentation Drawer cabinet

Condition: used, Year of construction: 2018, operating hours: 3,000 h, travel distance X-axis: 3,200 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, table length: 3,000 mm, spindle speed (min.): 4,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 10, Equipment: rotational speed infinitely variable, CNC drilling/milling machine Isdpfx Aiszqvbpe Rstk No CNC knowledge required, extremely easy to operate Tool holder: Laip Coolant system Automatic tool changer for 10 tools Automatic tool length measurement Data import: DXF Electronic handwheel Light curtain on the operator side Spindle motor: 7.5 kW Spindle speed: 200-2000 RPM Touchscreen: 21.5" Factory inspected

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X387V03910, Year of construction: 2019, operating hours: 6,115 h, load capacity: 3,000 kg, lifting height: 4,495 mm, fuel type: electric, mast type: simplex, construction height: 2,924 mm, No minimum price – guaranteed sale to the highest bidder! Itsdpozu Ng Hjfx Ai Rsk TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,495 mm ISO class: 3 (2,500–4,999 kg) MACHINE DETAILS Mast type: Simplex Fuel type: Electric Rated drive power: 2 × 9 kW Battery voltage: 80 V Battery weight: 1,480–1,636 kg Overall height: 2,924 mm Dead weight: 4,150 kg EQUIPMENT Side shifter Fork positioner Heater Full cab

Condition: good (used), Year of construction: 2012, functionality: fully functional, Matec 30 L, Year of manufacture 2012, Heidenhain iTNC 530 control, X/Y/Z travel 1300/600/700 mm, Spindle speed up to 12,000 rpm, HSK 63-A spindle mount, Electric handwheel, Isdpfxozlc Hne Ai Retk 20 bar internal coolant supply, Paper belt filter, 80-way water coolant supply, Fully enclosed work area, Direct measuring systems, Chip conveyor, Bellows with steel blades, 3D measuring probe, Laser measuring device

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Itedpfxjw Hxiwe Ai Rok Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system c/w tooling ----- Clearance Sales -----

Condition: ready for operation (used), Year of construction: 2004, SPS CP2 SpotUV 72cm*102cm + UV SPS ClassicJet M2 (2H/1C UVi) / 2 x heating stations UV cooler ST2 stacker delivery Also included are extra brand-new lamps, extra strap and about 80 metal frames. Ijdpfxjwmmhze Ai Rjtk Max paper size : 720 x 1020 mm Min paper size : 320 x 450 mm Screen size : 1140 x 1280 mm Speed : 3300/h Dimensions : 4090 x 2350 x 1580 mm Weight : 4200 kg Air : 6 bars Power supply : 3 x 400V N PE 50/60 Hz – 13.5 Kw

Condition: excellent (used), Year of construction: 2009, URBAN AKS 6910/4 four-head welding machine, reading from right to left, maximum welding dimensions: 3,000 x 4,000 mm, Windows-based control system, weld bead control with a limit of 0.2 mm for colored profiles, previously operated in a single-shift mode, technically overhauled and fully functional. Isdpozu Nv Iofx Ai Retk

Condition: used, Quantity: 2 units available Functionally tested; item originates from the dismantling of equipment belonging to an automotive supplier. Manufacturer: SPS electronic Type: RL42-L Function: High-voltage relay for insulation and dielectric strength testing Switching voltage: up to 5 kV DC Switching current: up to 10 mA Coil voltage: 24 V DC Itedpfx Aozmm Ixsi Rok Application: High-voltage test equipment, safety circuits

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 3101, power: 22 kW (29.91 HP), filling opening width: 500 mm, filling opening length: 800 mm, Shredder for wood waste / plastics / paper / cardboard / ... Nails in the wood are no problem either... Iedpfxozvmphj Ai Rjtk READY FOR USE

Condition: new, pressure 300 t working feed 3-8 mm/sec stroke 500 mm Itjdsvxw Hmjpfx Ai Rjk return speed 15 mm/sec table-size 3000 x 1500 mm tank capacity 45 l travel x / y 2600 x 1000 mm daylight 500 mm total power requirement 18,5 kW weight of the machine ca. 18 t

Year of construction: 1985, condition: used, Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cleaned, all guideways and support surfaces were ground and partially scraped, motors were inspected and fitted with new bearings, the drilling spindle was fitted with new bearings, the ball screw incl. nut was replaced, the pump motor was overhauled, the wiper set was replaced, and the machine was repainted and all functions were checked and rectified. Including extensive accessories. Documentation available. Inspection possible by arrangement. Iodozu Szyepfx Ai Retk

Condition: used, Year of construction: 2000, machine/vehicle number: 0-201-24-5315, functionality: fully functional, operating hours: 999,999 h, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 150 mm, number of axes: 3, number of slots in tool magazine: 12, controller manufacturer: HOMAG, actuation type: electric, total height: 2,650 mm, total length: 5,750 mm, total width: 4,000 mm, overall weight: 5,885 kg, year of last overhaul: 2023, Equipment: CE marking, documentation/manual, The machine is in working order and is being replaced due to the purchase of a new machine. The price includes an associated vacuum pump. Itodpfx Aoy Tmc Esi Rsk

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: LE-2104-133, For Sale: Labtech LE30-30/C 3D Filament Extrusion Line We are offering for sale a high-quality 3D filament extrusion line manufactured by Labtech Engineering Co., Ltd., a well-known producer of laboratory and production extrusion equipment. Technical Specifications Manufacturer: Labtech Engineering Co., Ltd. Model: LE30-30/C Year of Manufacture: 2021 Power Supply: 400 V Phase: 3 Installed Power: 16.7 kW CE Certified Price: EUR 45,000 Condition The machine is in excellent condition, has been professionally maintained, and is ready for immediate production use. Isdjzgwlzepfx Ai Rjtk Included in the Sale Complete 3D filament extrusion line Additional spare barrel 25mm Additional spare screw 25mm/24D Optional Equipment Available for Purchase Laser diameter gauge Material dryer Material feeding/dosing system This extrusion line is suitable for the production of high-quality 3D printing filaments and offers reliable operation with consistent output quality. Additional photos, technical details, and machine inspections can be provided upon request. Location: Ivanka pri Nitre

Condition: good (used), functionality: fully functional, machine/vehicle number: 351H1015830, Year of construction: 2000, operating hours: 9,606 h, load capacity: 3,000 kg, load center: 500 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Perkins, gearing type: hydrostat, tire condition: 55 %, front tire type: pneumatic tires (air-filled), front tire size: 7.00-12, rear tire type: pneumatic tires (air-filled), rear tire size: 23x9-10, overall weight: 5,260 kg, color: red, Equipment: CE marking, lighting, == KEY SPECIFICATIONS == Year: 2000 Hours: 9,606.7 h Lifting capacity: 3,000 kg Mast type: Duplex Drive: Diesel Engine: Perkins Operating weight: 5,260 kg Serial number: 351H1015830 CE certification: Yes == EQUIPMENT & FEATURES == Duplex mast Closed cabin Long forks Front work lights Isdszuwtzopfx Ai Rstk Rear work lights Flashing beacon Exterior mirrors Front windscreen wiper Load capacity diagram == CONDITION == Used condition with visible signs of commercial use. The machine shows dirt, scratches, paint wear and surface corrosion, particularly on the mast, fork carriage and forks, as shown in the photographs. Inspection and operational testing are possible by appointment. == DESCRIPTION == Used Linde H30D-03 diesel forklift from 2000 with 9,606.7 operating hours. The machine has a rated lifting capacity of 3,000 kg, a duplex mast, a Perkins diesel engine and an operating weight of 5,260 kg. Equipped with a closed cabin, long forks, work lighting, exterior mirrors, a windscreen wiper and a flashing beacon. Suitable for industrial material handling, warehouse operations and general loading work. == PRICE, LOCATION & DELIVERY == Price: €7,950 excluding VAT Location: Sittard, the Netherlands Delivery terms: EXW Worldwide transport can be arranged by Collé Rental & Sales.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Precision machining center HSC 30 linear 5 axes Siemens 840D Travel range X/Y/Z 320 /300 /280 mm B-axis: +/- 120° C-axis: 360° Rapid traverse rate 50 m/min Spindle speed range 0 - 40,000 rpm AC main drive with 19.5/15 kW and 16/12 Nm Incl. spindle cooling and rotary union Tool holder HSK-E 40 according to DIN69893 Linear axis drive package Tool magazine, 30 positions, double gripper Active cooling unit for main spindle and linear drives Direct absolute linear encoders 3D control Quick-change system EROWA ITS 150 Measuring probe Blum TC 52 Blum laser Interface for handling system EROWA IKZ 40 bar Iedezlhmmjpfx Ai Rstk Electronic handwheel Coolant gun Compressed air Production package EROWA Robot Compact 80 50 pallet positions for ITS 148

Condition: new, maximum load weight: 37,363 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, total width: 2,540 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer SPS Maxima Heavy-Duty Platform Semi-Trailer TECHNICAL INFORMATION: * Fifth wheel height 1,150 mm * Platform length 13,600 mm * Gooseneck 180 mm * Platform height (loaded) 1,300 mm * Wheelbase 7,700 mm * Axle distance 1,360 mm * Overall width 2,540 mm * Technical total weight (80 km/h) 45,000 kg * Technical total weight (60 km/h) 46,000 kg * Tare weight 7,637 kg CHASSIS: * BPW axles with air suspension and disc brakes * Air suspension including load indicator * 1st axle can be lifted * Wabco braking system * Tires 385/65R22.5 FRAME: * Chassis made of high-quality, high-strength S700 MC steel * 30 mm hardwood flooring * Jost support legs Itedpfx Aisi Rtfae Rek CARGO SECURING: * Lashing points * Recess pockets for stanchions * Stowable stanchions * Container locking mechanisms * Front wall made of steel, 1,500 mm ACCESSORIES: * 1x PVC-coated steel toolbox 1,500 mm x 480 mm x 450 mm * Stanchion storage location on the front wall * Steel side impact protection Color: RAL 3020 Traffic Red We are happy to provide further information upon request.

Condition: good (used), Year of construction: 2009, functionality: fully functional, For sale is a robust and reliable Holzkraft / SCM Minimax FS 30 Genius jointer and thickness planer. This machine is ideal for carpentry shops, woodworking businesses, training workshops, and ambitious woodworking enthusiasts. Thanks to the solid cast iron tables and proven SCM technology, the machine operates precisely and reliably. The machine is in well-maintained, used condition and can be inspected and tested by appointment. Technical data: Manufacturer: Holzkraft / SCM minimax Type: FS 30 Genius Year of manufacture: 2009 Voltage: 400 V / 3 phases Motor power: approx. 3.0 kW Jointer width: 300 mm Thickness planer width: 300 mm Combined jointer and thickness planer Ijdpszlqh Hsfx Ai Rstk Cast iron tables Aluminum fence for jointer Dust extraction port available Without stand Weight: approx. 445 kg Equipment: Jointer Thickness planer Aluminum fence Folding jointer tables Dust extraction hood Operation via main switch with emergency stop Scope of delivery: Holzkraft / SCM Minimax FS 30 Genius Accessories as shown in the photos The machine can be inspected and tested while powered. Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Iedpfxotp I S Aj Ai Rjtk

Condition: good (used), Year of construction: 2009, 0,4-6 mm Isdszvq Eyepfx Ai Retk Workingpiece thickness from to 6-60 mm Total length 3516 mm Feed speed 10 m/min. Weight 850 kg

Condition: used, power: 24 kW (32.63 HP), color: yellow, Year of construction: 1996, operating hours: 11,776 h, CATERPILLAR GEP30 OLYMPIAN GENERATOR SET...30 KVA DIESEL GENERATOR...IN GOOD WORKING ORDER...STARTS AND RUNS... Iodpfx Aiei Uz Iqo Rstk

Condition: ready for operation (used), Year of construction: 1999, Available immediately from our location: 5-axis CNC turning and milling center WFL, Voest, Alpine, Steinel Type WFL M 30 – G Year of manufacture 1999 Siemens Sinumerik 840 C Turning length 1050 mm Diameter over slide 440 mm Turning spindle on the right Turning spindle on the left Main drive 37 kW Spindle speeds 10 – 5000 rpm Isdpszukgbsfx Ai Rotk Cross slide Counter spindle housing on the right Cross slide on the right Turning, boring, and milling unit IKZ (internal coolant) 90 bar Tool magazine with 96 positions Disc turret on the right, 2 x 12 positions C-axis on the left and right Hydraulic chuck on the left and right Chip conveyor Weight with accessories 12 tons Price: EUR 38,000.— plus VAT, ex works.