Used Stork Forming And Breading Line for sale (18,767)

Condition: new, Year of construction: 2025, Roll forming roof panel machine F3 with cover Roll forming roof panel machine F3 is roofing equipment that is used in process of standing seam roof panel production and standing seam roofing installation. With help of electric motor torque goes from motor through sprockets and the connection chains to the rolling rollers of the machine making them to rotate and form necessary profile. In order to protect workers while working with roll forming roof panel machine, we offer to equip it with standard side covers and additional top part cover to protect forming part of machine. So, using standing seam roofing machine F3 with protective covers operators of machine will be protected from injury, and machine would be protected from any outside object to get into working mechanism. Pedpfxsh R I Iue Ag Degk However, while working with roof machine, it’s possible to take off upper cover and leave side covers of machine while working. If upper cover isn’t needed you can purchase machine without it. Our roll former standing seam machine is light and mobile one so you can work with it at your workshop or directly at roof installation place saving money on transportation expenses. Roll forming roof panel machine F3 has special adjusting screw to adjust machine for different panel width production. You just need to rotate adjusting screw to get necessary panel width sizes. Standing seam roof machine F3 can work with different materials such as steel, aluminum, copper. Machine can be adjusted to roll different metal thicknesses. As additional options with F3 machine you can get: length measuring device ribbed panel rolls radius panel rolls cross cutting knife floor decoiler hand seamers electric seaming machine ESM-1 sliding clip formers ribbed panel forming machine RPFM

Condition: new, Year of construction: 2025, Window drip cap roll forming machine PO-1 allows to produce “window trim” profile by rolling the sheet metal through forming rolls. A window trim is an element that is widely used in construction while windows installation. In the standard way the window trim is bent step by step using a manual folding machine. This is a cheaper, but more time-consuming process. The metal sheet must be pre-marked for each bending operation. Each bend is then performed using a manual bending machine. The operator must set the necessary dimensions according to the marks, fix the sheet metal with the machine"s fixation mechanism, and then bend it. The length of the window trim is limited to the maximum working length of the bending machine. Thus, each manual folding operation is time-consuming and the production process becomes expensive and inefficient. Pgodpfx Agslwt Ado Djk To improve the production process we offer the window drip cap roll forming machine PO-1. This machine rolls the window trim profile on both sides simultaneously in a single operation. The rolling speed is 10 m/min. The machine is equipped with 7 pairs of forming rolls. The minimum width of window trim is 120 mm when rolling on both sides at the same time and the maximum width is 610 mm. To change the width of the window trim, simply use the adjusting handle, which makes it very easy to adjust the machine to go from one trim width to the next. Thus, the adjustment process is not time-consuming. It’s also possible to roll the window drip cap on the machine in two steps.

Condition: new, Year of construction: 2025, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. As an additional equipment for the machine, we offer: - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity. Pedpsn Hqmmsfx Ag Degk

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. Pedpeh Aw Rnsfx Ag Dogk It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: new, Year of construction: 2024, Soffit panel roll forming line was designed by our company to produce wall soffit panels with different lengths. Line has automatic system so you can put length of panels and numbers you need and machine will produce it in automatic mode and cut it automatically. Machine has special cutting shear to cut panels as well. Line can be equipped with manual or automatic decoiler as an option. So it can be effective solution for soffit panels production Pgsdpfjrqg U Dox Ag Dsk

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. Pgodsm Twnljpfx Ag Dek For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: reconditioned (used), used Kemper bread line, reconditioned, with round and longmoulder Kemper Superba SU-BR-2500G, rounder 270 cm long, with bucket conveyor BE-13 Pgodpfx Ashfdvxsg Dok

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern Pedpfx Agjvtpcio Dsgk - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 1 mm, shaft diameter: 50 mm, input voltage: 400 V, coil weight: 3,000 kg, FOR SALE – Roll Forming Line for Drywall Profiles UW / CW (EU + IT) For sale: cold roll-forming line for metal drywall profiles, complete and high-productivity, designed for the production of UW, CW_EU and CW_IT profiles. Main features: * Roll forming line with 18 forming stations * Double hydraulic decoiler (3 tons per head) * Introduction and lubrication unit * Integrated rotary punching unit * Multi-axis adjustable straightener * Double wagon cutting and punching unit * Dedicated cutting and punching dies for UW, CW_EU and CW_IT * Bosch Rexroth hydraulic power unit * CMZ control * CE certified * Complete safety guarding system Performance: * Working thickness: 0.50 – 1.00 mm Pgsdpjyi Hl Rofx Ag Djk * Material: DX51D + Z100 * Production speed: up to 130 m/min * Dimensional tolerance: ±0.5 mm/m * Total line length: approx. 15 m Included equipment: * Full set of cutting and punching dies * PLC software backup * Complete technical documentation * Construction and as-built drawings * CE Declaration of Conformity Machine condition: Complete industrial machine, high-end specification, manufactured by an international specialized roll-forming machinery producer. Ideal for manufacturers of drywall systems. Machinery is used but constantly updated and improved in every part. Pictures show both factory collection (so when new) + some of the updates which have been done. 📍 Available for inspection by appointment

Condition: good (used), Year of construction: 2004, machine/vehicle number: 300 584, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 400 V, input current: 85 A, type of input current: three-phase, overall weight: 8,000 kg, year of last overhaul: 2016, We are selling a complete shredding line including: - Artech RS75 shredder - Pusher / compactor Pgodpjxrtwwofx Ag Dek - Electrical control cabinet - Overband magnet - Sampler The loading conveyor and the discharge conveyor after shredding are not included in the sale.

Condition: used, Year of construction: 1990, Heavy-duty rollforming line 10 stations Pgsdpeymzzuefx Ag Dok Width: 260 mm

Condition: used, Year of construction: 1990, HEAVY DUTY ROLLFORMING LINE Psdpfx Ajymzywog Djgk 11 STATIONS WIDTH: 450 mm

Condition: used, Year of construction: 1990, HEAVY DUTY ROLL FORMING LINE Pjdpfx Aoymzxyog Djgk 9 STATIONS WIDTH: 450 mm

Year of construction: 2013, operating hours: 20 h, condition: as good as new (ex-display), functionality: fully functional, Processing line for stone fruit. 3 times used only. -Conveyor belt -Destoner 3000kg/h -Pulper - turbo extractor Pgsdpfx Aorqzy Sog Dek -Screw conveyor -Stone cleaning extractor -Central command unit -Dearator -Heat exchanger

Condition: new, Year of construction: 2026, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Pgsdpoq I Nw Iefx Ag Djk

Condition: excellent (used), A roll forming line with rollers for cold rolling office and storage cabinet fronts made of cold-rolled sheet metal. Roller center distance: 140 mm, Roller diameter: 45 mm, Keyway: 12 mm. The system features an electric mechanism for moving the roller sets apart by up to 1500 mm. The system is electrically operated. Psdpfx Agjwxv H De Djgk

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Pedpfox Eb Abjx Ag Dogk Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Condition: good (used), Year of construction: 2000, working width: 900 mm, total width: 1,800 mm, total length: 12,000 mm, total height: 3,550 mm, overall weight: 8,000 kg, For sale: Konig combi bread line 8/7/6/4 rows Includes: - TRO 240 hopper with oiling system - Konig Industrie Rex head machine Model A - Spreading conveyors - Proofing cabinet model: KGV V L Type: (900/500) K8 - V0 - (W) - R - RR900 - SCHN7/B - MO(WB) 1000 - STb8/7/4 - Stamping unit - Long roller - Seed station - Drop tables (8/7/6/4) (4 different drop tables with various belts included) - Storage trolley for the drop tables - Storage trolley for the flour sprinklers - Spare parts - Control cabinet - All documents and electrical diagrams Weight range: 20 to 30 grams up to 110 grams Output: 18,000 / 24,000 pcs per hour Working width: 900 mm New drum in the Industrie Rex Many spare parts such as spreading belts, etc. It is possible to inspect the line on site. We can carefully load the line onto a truck/container. Pgsdpfx Asxnb Iiog Dek Do you have comments or questions? Please feel free to contact us. Best regards, Leo Holland

Condition: excellent (used), 622 USED Koenig Lippelt Rustica ciabatta machine. EXTERNAL DIMENSIONS (in cm): - W: 180, - L: 75, - H:153. TECHNICAL DATA: Pgodpfxenpxl Dj Ag Dsk - 4 cutting rollers, The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, Year of construction: 2025, 576 NEW Bakeres OPTIMA bread production line. Service for 1 or maximum 2 persons. The whole line takes only 6 sqm. The line is a combination of simplicity and efficiency for a very attractive price. TECHNICAL DATA: - working capacity: 600-2400 pcs/h, - maximum capacity: 3000 pcs/h. - weight range 250-2000 g. Pedpfxsi Hlyqj Ag Dsgk You can see more at: bakeres pl

Condition: new, Year of construction: 2025, 574 NEW production line for: arabic bread, pita bread. BPlus and Bakeres solutions are suitable for both small craft plants with a capacity of 500-800 pcs/h and for large industrial bakeries with a capacity of 12,000 pcs/h. Our lines enable the production of flat bread of various shapes and diameters of 130-400 mm. We provide full technical and technological support for the implementation of the production line and the development of our own unique technology and recipe. The lines can be 1, 2 or 3 rows, with a weight of 40-200 g. Each project is individual, so please contact us. Currently, we have implemented several lines throughout Europe. You can see more at: bakeres pl Pedpfx Aei Hlp Djg Dsgk

Condition: used, WP Haton bread line consisting of: WP Parta U dough divider 1-pocket type 2001 weight range 300 - 2800 grams capacity max 1140 pcs/h year of build 2008 WP conical rounder hot air weight range 200-1000 grams Pgedpfjq I Abvex Ag Dok cap. 3600 pcs/h year of build 1998 WP Haton BIP intermediate proofer 12-row 30 swings 12 piece contents gross 360 dough cups automatic climate control weight range up to 1800 gr Benier Beversal dough moulder weight range 50 -1200 grams output max 1600 pc/h

Condition: good (used), Year of construction: 2002, Rondo Laminating and Shaping Line for Yeast Pastries - Smartline and Compactline model - used - year of manufacture: 2002 - length: 15 meters - without tools - components: satellite calibrator, dough rolling cylinder, standard calibrator, work table, cutting station, guillotine, discharge table - machine in production - collection from warehouse / shipping option - price on request Podpfx Agjw Nx S Ns Degk

Condition: excellent (used), USED Benier bread rounder. We have 2 such machines. EXTERNAL DIMENSIONS (in cm): - W: 140 - L:100 - H:190 TECHNICAL DATA: - regulated gutters, - rounding weight range: 50-1500 g. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Pedpfxjgtikvs Ag Dogk Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2025, condition: new, functionality: fully functional, Roll forming line for high trapeze profile 135 mm height. Machine is NEW and fully automatic. Decoiler 15 t (508/620 x 1500) + Roll forming line + Automatic stacker Automatic feeding into the roll forming, without manual hand operating. Pgjdpfx Agsxvz Nce Dek Line is installed and ready to inspect and test at anytime.