Used T+H Heating Element for sale (95,734)

Condition: used, functionality: fully functional, machine/vehicle number: H2X391H035.., Year of construction: 2018, operating hours: 7,223 h, load capacity: 2,000 kg, lifting height: 3,850 mm, free lift: 100 mm, fuel type: gas, mast type: duplex, construction height: 2,460 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Treibgas, LPG Forklift Chassis number: H2X391H035.. Load centre: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Hydrostatic Condition: Ready for operation and fully functional Technical condition: good Front tyres type: Solid rubber Pgsdpfx Agey Hmx Tj Dsk Front tyres condition: 60 - 80% Rear tyres type: Solid rubber Rear tyres condition: 60 - 80% Side shifter, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, half cab,

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Pgsdpfx Agoykvdls Dek Machine weight: approx. 2.2 t

Condition: used, machine/vehicle number: 17 27998, Year of construction: 2014, General information Field of application: Construction Drivetrain Type of fuel: Hybrid Make of engine: Kubota Weights Empty weight: 1.905 kg Functional Mast: articulated arm Lifting capacity: 230 kg Lift height: 1.500 cm Working height: 1.700 cm CE mark: yes History Number of owners: 2 Pjdpfx Agjy Avbpj Dogk Condition General condition: average Technical condition: average Visual appearance: average Other information Reconditioned: Yes Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Emission level: Stage IIIA / Tier III Delivery terms: EXW Max. horizontal reach: 900 m Max swing of arm in degrees: 400 Max swing of platform in degrees: 180 Production country: UK Additional information Please contact Martyn Joosse for more information

Condition: used, final pressure: 1,400 bar, pressure: 1,400 bar, Good working high pressure pump with 20mm plungers Pedpfx Agjv Suhzj Dsgk 1400 bar 35 ltr/min IL 375 TF375H

Condition: used, mileage: 347 km, power: 175 kW (237.93 HP), gearing type: automatic, fuel type: diesel, color: white, overall weight: 13,500 kg, empty load weight: 7,225 kg, maximum load weight: 6,275 kg, axle configuration: 4x4, number of seats: 1, first registration: 12/2023, emission class: euro5, operating hours: 347 h, front tire size: 600/60R30, rear tire size: 710/60R42, driver cabin: other, wheelbase: 2,995 mm, maximum speed: 50 km/h, Equipment: additional headlights, air conditioning, all wheel drive, onboard computer, power assisted steering, trailer coupling, Vehicle location: Bovenden. 1x air-suspended seat, air conditioning, high beam headlights, work lights, beacon, trailer coupling with air, electric, and hydraulic connections. Wheelbase: 2995 mm. Excellent condition! Rear rim weights! 347 operating hours! Former new price approx. €240,000! A detailed equipment list is available and can be provided on request! ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to change, prior sale, and errors reserved! Pgjdeyudbtjpfx Ag Dsk

Year of construction: 2007, condition: used, We offer this used Wintersteiger 34 070 SW-550 H T machine, year of manufacture 2007. Pedpfjy Dip Nex Ag Djgk Type: 34 070 SW-550 H T Model: Micro Grinder H T Voltage: 400-415 V 3 AC Power: 1.1 kW Power: 1.47 HP Frequency: 50 Hz Rated current: 3.3 A Weight: 220 kg Weight: 485 lbs Year of manufacture: 2007 If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,033 h, load capacity: 2,500 kg, lifting height: 4,015 mm, free lift: 150 mm, fuel type: gas, mast type: duplex, construction height: 2,750 mm, fork length: 1,200 mm, empty load weight: 4,815 kg, drive type: Treibgas, LPG forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Technical condition: very good Pgodpsymtvwsfx Ag Djk Front tires type: Super elastic Front tires size: 27x10-12 Front tires condition: 80 - 100% Rear tires type: Super elastic Rear tires size: 23x9-10 Rear tires condition: 80 - 100% Description: Workshop-inspected, new safety inspection (UVV) & service, new paintwork Sideshift, Third valve, rear working lights, front working lights, heating, road approval (STVZO), full cabin, air conditioning, CE certificate, Rear-view camera, rear & front, Mast No. H2X188V02316 - M188-035D01

Condition: used, Year of construction: 2017, operating hours: 14,179 h, Type of fuel: LPG Empty weight: 3.685 kg Dimensions (LxBxH): 250 x 120 x 276 cm Lifting capacity: 2.000 kg Lift height: 434 cm Fork dimensions: 1.100 x 950 mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: P117B04897R - Operating hours: 14179 - Lifting capacity: 2000kg - Lifting height: 4340mm - Overhead clearance: 2760mm - Free lift: 0mm - Fork length: 1100mm - Maximum fork width: 950mm - Minimum fork width: 300mm - Number of wheels: 4 Wheels - Attachment: Side-shift, Fork positioner - Options: Work lights - Mast: Duplex - Drive: LPG - Transport dimensions: 2500mm x 1200mm x 2760mm (l x w x h) - Transport weight [kg]: 3685kg - Transport packages [pcs.]: 1 Pgodswnimijpfx Ag Dek Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 1,729 h, load capacity: 4,000 kg, lifting height: 3,730 mm, free lift: 200 mm, fuel type: gas, mast type: duplex, construction height: 2,500 mm, fork length: 1,200 mm, drive type: Treibgas, LPG Forklift ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Technical condition: very good Front tires type: Superelastic Front tires size: 250/70-15 Front tires condition: 80 - 100% Pgsdpfsyyrpqox Ag Dsk Rear tires type: Superelastic Rear tires size: 250-15 Rear tires condition: 80 - 100% Description: Workshop-tested, new UVV & inspection, new paintwork Sideshift, 3rd valve, rear work light, front work light, full free lift, CE certificate,

Condition: new, power: 55 kW (74.78 HP), mast type: telescopic, Year of construction: 2023, Empty weight: 5.485 kg Pgsdpfx Aox Evk Asg Dek Chassis type: articulated Make of engine: Deutz Lifting capacity: 1.600 kg Top speed: 30 km/h Rental currency: EUR Please contact KEY-TEC Sales for more information = Additional options and accessories = - Quick coupler

Condition: new, functionality: fully functional, power: 150 kW (203.94 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MJK Series are mobile type Jaw crushing plants that is suitable for especially hard and abrasive stones and other type of stones with hardness level is high such as basalt, granite, gabbro. This model is also suitable for concrete recycle projects or coal mining projects. TECHNICAL SPECIFICATIONS: -Bunker: 20m3 -Production Capacity: 180-320 Tons Per Hour -Crusher Type & Size: Jaw Crusher – 1100x850mm -Maximum Feeding Size: 800mm -Total Motor Power: 150 kW MJK-110 is a combination of: • Bunker(Hopper) • Vibrating Grizzly Feeder (bypass) Pgodoy Dph Espfx Ag Dek • Primary Jaw Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO manufactures and installs stationary type stone screening & washing plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. 200-350 Tons/hour capacity of Washing and Screening Plant: - Riverstone Feeding Bunker Podpfey Dpf Rox Ag Djgk - 1300x4000x2 Decks Vibrating Screen - 2000x6000x4 Decks Vibrating Screen with washing system - 1500x4000mm Dewatering screen with Hydrocyclone - Conveyor Belt System - Control Panel and Automation System FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Year of construction: 1990, lifting capacity: bei 500 mm Schwerpunktabstand 3000 kg stroke: 4675 mm fork length: 1200 mm weight: 4910 kg dimension: 2350 x 1300 x 2175 mm Pgedpfxswviw Re Ag Dsk

Condition: new, power: 349 kW (474.51 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, Equipment: fridge, = Additional options and accessories = - Leaf suspension = Notes = Fuel tank: 680 litres Air conditioning Cab air suspension Roof spoiler Refrigerator Bluetooth DAB radio = Further information = Transmission: 16-speed manual Tyre size: 315/80R22.5 Suspension: leaf suspension Pgodpfxjw N Rupe Ag Djk Front axle: steered Gross vehicle weight: 32,000 kg

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Pgsdpfx Agsq Nia Is Dsk Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Psdpfx Agek S Dt To Dsgk Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: excellent (used), Year of construction: 2019, operating hours: 6,854 h, lifting height: 4,100 mm, fuel type: gas, mast type: duplex, power: 55 kW (74.78 HP), total height: 2,840 mm, total length: 3,000 mm, total width: 1,450 mm, color: other, Year of manufacture: 2019 Empty weight: 6.350 kg Lifting capacity: 4.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Side shift - Work lamp(s) = Remarks = General Country of production: Germany Condition Pgedpfx Agsx Adubj Dek CE type: CE

Condition: excellent (used), Year of construction: 2020, operating hours: 6,292 h, lifting height: 5,150 mm, fuel type: gas, mast type: duplex, power: 39 kW (53.03 HP), total height: 3,300 mm, total length: 2,850 mm, total width: 1,250 mm, color: other, Year of manufacture: 2020 Empty weight: 4.790 kg Lifting capacity: 3.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 4th Hydr. circuit - Beacon(s) - Blower - Side shift Pgsdpfx Aoxvl Dweg Dek - Work lamp(s) = Remarks = General Country of production: Germany Condition CE type: CE Fork positioner & side shift, Closed cabin with heating, New rear tires

Condition: excellent (used), Year of construction: 2018, operating hours: 6,949 h, lifting height: 4,620 mm, fuel type: gas, mast type: triplex, power: 28 kW (38.07 HP), motor manufacturer: Volkswagen, total height: 2,100 mm, total length: 2,400 mm, total width: 1,150 mm, color: other, Year of manufacture: 2018 Empty weight: 3.565 kg Lifting capacity: 2.000 kg Pedpfx Agoxgu Sxs Degk CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - Blower - Freelift - Side shift - Work lamp(s) = Remarks = General Country of production: Germany Condition CE type: CE

Condition: used, Year of construction: 2013, operating hours: 9,915 h, Equipment: all wheel drive, Internal vehicle number: G300449 German vehicle, good condition, ready for operation Available immediately at our yard in Kaufungen - Kassel, Germany For more information, please contact Luis Lucena Liebherr R944C T Year of manufacture: 2013 9,900 operating hours 43.2 tons Width: 3,050 mm Financing example: * Internal number: G300449 * Purchase price: €39,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €600.55 * Final installment: €6,380.00 If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted We are happy to accept your used vehicle in trade-in. Psdpfxsyvm Ake Ag Dsgk Financing directly through us is possible. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories Pgsdpfx Aogrkigog Dok It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Year of construction: 2017, condition: excellent (used), machine/vehicle number: 26616, Equipment: CE marking, The Hapa 237-Hybrid is a modular UV printing system that combines the economical features of flexo technology with the full flexibility of digital Drop On Demand printing. Operating Roll to Roll, the system can print on a wide range of roll-fed substrates including aluminum foil, paper, PVC, medical paper, and Tyvek. Utilizing UV-cured inks, it is ideally suited for pharmaceutical applications. Conversion and installation of PPS is possible. - Print today, use tomorrow - Serve multiple lines with one machine - Print complete artwork including variable data - Overprint partially pre-printed foils - High speed - Compact footprint - User-friendly operation - Integrated edge and tension control - Leaflet printing with GUK connection possible Psdpfxjyr Imbo Ag Djgk Technical Data Sheet: (See Images - 3 pages)

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2Y394L01382, Year of construction: 2022, operating hours: 4,782 h, load capacity: 5,000 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: gas, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Pgedpsytn I Iefx Ag Dsk Lift height: 3,700 mm Overall height: 2,900 mm Free lift: 150 mm MACHINE DETAILS Mast type: Standard Drive type: LPG Battery: 12 V starter battery Operating hours: 4,782 h EQUIPMENT Former Linde full-service unit Safety inspection (UVV) until 02/2027 Next service due in 518 operating hours Note: Mast removal costs €750 net. All dimensions are approximate. No liability is assumed for any writing or measurement errors. COLLECTION CONDITIONS Loading from the side up to 5 t possible on site with large forklift at your own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT prior appointment from Monday to Friday, 7:00 am to 4:30 pm. If the mast is too high for transport, it can be dismantled on request. If the machine is not collected within the agreed deadline, a storage fee of €20 per machine per day applies (additional charges must be paid before collection).

Condition: new, functionality: fully functional, power: 275 kW (373.90 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH JS-1 mobile jaw and impact crusher is a high-efficiency mobile crushing and screening plant designed for processing natural stones such as medium-hard limestone, dolomite, and river stone. The JS-1 is manufactured with advanced engineering expertise and offers maximum efficiency even in challenging site conditions thanks to its durable components, high-performance crushers, and compact design. The system's first chassis features a CJC-60 primary jaw crusher, a vibrating feed hopper, a bypass belt, and a wheeled mobile chassis with hydraulic legs. The second chassis houses a CSI 1210 secondary impact crusher, a three-deck vibrating screen, a return belt, foldable stockpile belts, and a dust suppression system. Psdpfsxqf Thsx Ag Dogk Thanks to the powerful impact crusher design of the JS-1, the final products have an excellent cubic shape, providing ideal aggregate quality, especially for concrete production. The plant's production capacity varies between 60 and 80 tons per hour, depending on the hardness of the rock. Thanks to its user-friendly automation system, SIEMENS – SCHNEIDER brand components, and PLC control, the plant can be fully automatically managed via a tablet. Installation is completed in a short time, and the need for external equipment is minimized thanks to hydraulic opening mechanisms. The JS-1 can be easily transported with a single tractor due to its dimensions suitable for international road transport. JS-1 - Mobile Jaw and Impact Crusher Technical Specifications Production Capacity: 60-80 tph Maximum Feed Size: 600 x 380 mm Feed Height: 4.5 meters Main Configuration: Jaw Crusher + Secondary Impact Crusher + Vibrating Screen Total Motor Power: 275 kW Electric Generator Requirement: 550 kVA Plant Weight: 60 tons (total of two chassis) Plant Dimensions: 1st chassis 11x3x4.4 m / 2nd chassis 3.35x4.3x17.8 m Chassis Type: Double Chassis Why Choose the JS-1 Mobile Crushing and Screening Plant? CONSTMACH JS-1 is an excellent choice for professionals seeking maximum efficiency, minimum operating costs, and superior product quality in the rock crushing process. Its fully automatic control system, high mobility capability, and durable construction offer uninterrupted production for many years. Furthermore, CONSTMACH's engineering expertise, after-sales technical support, and spare parts supply guarantee ensure the continuity of your business. If you are looking for quality, performance, and reliability in stone crushing solutions, experience the difference with the JS-1 Mobile Jaw and Impact Crusher, backed by CONSTMACH quality. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH stationary stone crushing plants are designed with a focus on high efficiency and durability, offering long-lasting industrial solutions. Each plant is specifically configured based on the hardness and abrasiveness of the material to be crushed and the desired product size. With production capacities ranging from 50 t/h to 1,000 t/h, they perfectly adapt to projects of different scales. The crusher types used in the plants are selected according to material properties to achieve maximum performance. Our design team creates optimized 3D layout plans using feeder, crusher, screen, bunker, washer, and conveyor components. This ensures high capacity, low energy consumption, and minimal maintenance costs throughout the production process. Each plant is custom-designed to suit the investment budget and operating conditions. Our engineering team offers the most suitable projects and proposals to prevent unnecessary expenses. CONSTMACH stationary crushing and screening plants are equipped with high-quality electronic components from SIEMENS and SCHNEIDER, and minimize operator intervention thanks to a PLC-based fully automated system. This provides safe, fast, and stable production. Podpexqhy Rjfx Ag Djgk Fixed Stone Crushing Plant Technical Specifications Production Capacity: 50 – 1,000 t/h Type of Material to be Crushed: Varies according to the desired product type Final Product Dimensions: Adjustable upon request Crusher Types: Jaw, impact, cone, or vertical shaft crusher options Why Choose a Fixed Stone Crushing Plant from CONSTMACH? CONSTMACH makes a difference with its engineering approach that offers customized solutions to each customer. Our plants operate continuously for many years thanks to high-quality components, energy-efficient designs, and reliable automation systems. With our after-sales support service that prioritizes customer satisfaction, we are by your side at every stage of your investment. CONSTMACH is the right choice for fixed rock crushing plants offering powerful performance, low operating costs, and maximum efficiency. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.