Used T-Nuts M5 30 Pieces for sale (89,438)

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, MACHINE WAS OWEHAULED IN 2020 WITH NEW SIEMENS CONTROLS OPERATING SYSTEM GOOD CONDITION WORKING IN DAILY PRODUCTION Kledpfx Asvmd Rzsm Nsr Installed power 135 kW Heater power 35 kW Auger diameter 80mm Power of auger motor 55kW Closing force 300kN Plate 650x1000 Head volume 6,3l Diameter from 15 to 250mm

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the Kjdpfeihb Amex Am Nolr o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Year of construction: 1991, condition: good (used), coil weight: (2 x 15 t) / 1 x 30 t coil width: max. 1.900 mm Kjdpfx Amelimrmj Nelr coil OD: max. 1.900 mm

Year of construction: 1991, condition: good (used), coil weight: (2 x 15 t) / 1 x 30 t Kedpsbh Dg Sefx Am Nolr coil width: max. 1.900 mm coil OD: max. 1.900 mm

Year of construction: 1994, condition: good (used), coil width: max. 2.000 mm coil weight: max. 30 t Kledped Ha Hcsfx Am Nsr stroke: 1.000 mm

Year of construction: 1994, condition: good (used), coil width: max. 2.000 mm coil weight: max. 30 t stroke: 1.000 mm Klodpfx Aslimrxjm Nor

Condition: used, Year of construction: 2007, Used Golfetto Sangatie Stone Catcher Multiple units available Kljdpsxft Ddofx Am Njr Drive 2x 3kW Used for destoning wheat Measurements in attached file Gravity Selector Dryostoner

Condition: used, maximum load weight: 24,200 kg, overall weight: 30,000 kg, axle configuration: > 3 axles, first registration: 11/2011, Equipment: ABS, Manufacturer HFR Model 30 t. 4 axles Timber transport / Wood transport Year 2011 Condition Good Serial Number UH9PX301125HF1141 Ksdjw N Uuyjpfx Am Nelr Ref. nr. 7949 Reg. date: 25-11-2011 Last seen: 10-12-2024 Disc brake: ? ABS: ? Rear axles: BPW Suspension: Air Tire Size: 265 / 70R19,5 Cover% left 100 - 100 - 80 - 100% Total weight: 30000 kg. Net weight: 5800 kg. Load capacity 24200 kg. Inside length: 7400 mm.

Year of construction: 1990, condition: excellent (used), O F F E R Subject to prior sale and errors excepted, we can offer you, without obligation, the following ex-stock: Kledpfx Aexzuuvem Nor D E G E N Manual Cutting, Pointing, and Cylindrical Grinding Machine for Ejector Pins Model: T Year of manufacture: 1990 _____ Grinding carriage center height: approx. 200 mm Grinding wheel Ø x bore: 200 x 30 mm Grinding wheel speed: approx. rpm Grinding wheel drive power: approx. kW Workpiece headstock center height: 160 mm Workpiece headstock longitudinal adjustment: approx. 100 mm Workpiece headstock transverse adjustment: approx. 200 mm Workpiece headstock swiveling either side: approx. 2 x 30° Collet chuck capacity: 0.5 – 20 mm Weight: approx. 500 kg Accessories / Special equipment: • Workpiece headstock swiveling for pointing and deburring • Collet chuck with approx. 10 different collets • Plexiglass safety guard for grinding wheel • Compact, free-standing on sturdy base • Optional cross-slide feed unit Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further tool grinding machines available from stock – please enquire!

Condition: used, Year of construction: 2010, Milling machines Travel distance X: 760 mm Travel distance Y :510 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Hurco WinMax spindle chuck: SK - A40 Kodpfx Aov D U Apjm Nelr spindle revolutions: 12000 rpm table size X: 1020 mm table size Y: 508 mm max. workpiece weight: 1350 kg tool changer: 24 - time input Power : 13,5 kW Torque: 214 Nm Rapid traverse: 35 m/min spindle cooling chip conveyor

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (60 - 740 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 30 - 370 grams (depending on dough) Piston: 1 dough part piston (diameter 80 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg Kljdpfxjwyu Upj Am Ner SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: good (used), functionality: fully functional, Length: Diagonal 250 cm Horizontal 275 cm Ksdpfx Amov I T Rae Nelr Width 30 cm Height of crossbeams 4 cm Two available! Price 1050 EUR each!

Condition: used, Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table width: 1,000 mm, table length: 510 mm, spindle speed (max.): 15,000 rpm, Hurco VMX 30 T CNC machining center with additional 4th CNC rotary axis Kjdpfjwgbfusx Am Nslr Year of manufacture 2011 Serial No. M34216027081EHC Frame No. H-30688 Hurco Winmax control system Table size 1,000 x 510 mm 3 axes, X/Y/Z travel 750 x 510 x 510 + 4th rotary axis Max. table load 1,350 kg Max. spindle speed 15,000 rpm Tool holder SK 40, 24-station tool changer, coolant system, chip conveyor

Condition: used, Year of construction: 2017, total length: 2,850 mm, lifting height: 195 mm, load capacity: 2,800 kg, Ausgelegt für 8000kg Tragkraft auf der Gabel Kjdpfx Aexd E Hbjm Nolr

Condition: excellent (used), Standard boiler 30 t/h. Year of manufacture: 2012. Equipped with two oil burners. Kledpfxsxgn Ito Am Ner

Year of construction: 2009, condition: good (used), Load capacity: 30 t Klsdsqiz N Repfx Am Ner Fine lift Lifting height 9 meters

Condition: new, mileage: 70 km, power: 140 kW (190.35 HP), overall weight: 7,490 kg, fuel type: diesel, color: white, total width: 2,150 mm, total height: 2,265 mm, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, The ISUZU ? Commercial Vehicle Center in Germany offers expertise, service, and consultancy, and presents: ISUZU M30 M MT Wheelbase: 4,475 mm Chassis Net price / export price: from €48,774 2-year warranty on the base vehicle from the date of first registration Standard equipment: - 5.2 L turbo diesel with common rail direct injection, 140 kW / 190 hp, EURO VI OBD-E (maximum torque 510 Nm at 1,600–2,800 rpm) - Particulate filter system with DPD and AdBlue (the self-cleaning system allows filter regeneration without a workshop visit, thanks to new DPD regeneration technology, which indicates when cleaning is required. Simply press the DPD button and the system cleans itself in 20 minutes) - 6-speed manual gearbox or automated manual gearbox (NEES II) with 6 gears and torque converter (surcharge €1,656 net), with cruise control. Smooth, wear-free start thanks to integrated hydraulic torque converter! Gears can also be selected manually at the gear lever. The driver can use a switch to select whether the vehicle starts in first or second gear, depending on load condition. - Leaf spring suspension front axle (max. 3,100 kg), rear axle leaf spring suspension (max. 5,800 kg), front and rear stabilizer bars - Tyres: 215 / 75 R17.5 C, single tyres at the front - Twin tyres on the driven rear axle, spare wheel - Ventilated disc brakes front and rear - Cruise control, speed limiter (90 km/h) - Engine brake - Electric parking brake - 24 V electrical system, 90A alternator, 2x 90 Ah batteries - Diesel tank: 100 L / AdBlue tank: 16 L - New, modern cab with optimum space usage, generous headroom and ample legroom, excellent ergonomics and visibility, low entry height - BI-LED headlights with headlight cleaning system ensure optimal visibility at night - Double door seals reduce cabin noise, supporting acoustic comfort - Cigarette lighter, cup holders, storage compartments in door panels and overhead, armrests in driver and passenger doors - Cab paint: Arc White 729 - Vehicle dimensions: cab width 2,040 mm, rear axle width 2,115 mm, cab height 2,265 mm (top of cab), chassis height 800 mm, chassis width 850 mm - Suspended driver's seat - Front passenger double bench, 3 seats, headrests, seatbelt warning system - Driver and passenger airbags, seatbelt tensioners for driver and passenger - Height- and tilt-adjustable steering wheel, multifunction steering wheel, interior mirror - Electric windows - Electrically adjustable and heated exterior mirrors - Electronic immobilizer - Double-DIN DAB+ radio 6.8" with Bluetooth hands-free system, Apple CarPlay / Android Auto compatible, USB charging port - Driver information display 7" - Fog lights, daytime running lights, automatic lighting - Reverse warning signal Kledsxmnl Sspfx Am Njr - Central locking with remote control - Manual air conditioning - Digital EU tachograph Safety Pack 2 features: - ABS: Anti-lock Braking System - ASR: Traction Control on rear axle - EBD: Electronic Brakeforce Distribution - EVSC: Electronic Stability Control - LDWS: Lane Departure Warning System - MOIS: Moving Object Detection - DWS: Distance Warning System - MAM: Emergency Braking Assistance - FVSN: Forward Vehicle Start Notification - DDAW: Driver Drowsiness Alert - TSR: Traffic Sign Recognition - TPMS: Tyre Pressure Monitoring System - RM: Reversing Camera with Monitor - AEBS: Autonomous Emergency Braking System - A

Condition: excellent (used), machine/vehicle number: 91-1101, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Kjdpednr E Aefx Am Nolr

Condition: new, *IMMEDIATELY AVAILABLE* Including 18 mm floor plate / parabolic suspension / loading ramp / tiltable Technical Data: • Type: New vehicle • TÜV (MOT): New/2 years • Availability: IMMEDIATELY • Permissible total weight: 3,500 kg • Unladen weight: approx. 1,072 kg • Payload: approx. 2,428 kg • Internal dimensions: 520 x 210 x 30 cm (L x W x H) • Overall external dimensions: 673 x 220 x 159 cm (L x W x H) • Loading edge height: approx. 65 cm • Tyres: 195/50R13C • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • Including vehicle documents Vehicle Structure: • Floor: 18mm phenolic resin laminated plywood • Side walls: double-walled aluminium Ksdpfxoyyw Rge Am Njlr • Side wall height: 30 cm • Chassis: KNOTT parabolic suspension • Tipping function: YES • Hydraulics: manual hydraulic • Loading ramp angle: approx. 11° • Overrun device & brake: KNOTT • Frame/chassis: fully welded, hot-dip galvanized steel frame • Extension: no • Lashing eyes: 8 pieces along side edge • Supports: via rear when tilting • Ramp: 1 upright ramp on shaft, 90 cm • Lighting connector: 13-pin • Registration: ZBII & COC documents Standard Equipment: • Parabolic spring axle (leaf spring) for extreme loads and driving comfort • Fold-down aluminium side walls • Welded side wall/frame construction made from sheet steel, hot-dip galvanized by immersion • Very robust bolted V-drawbar, reinforced • 30 cm high side walls • Hot-dip galvanized steel loading ramp, upright • Very robust fully welded steel frame • Frame completely hot-dip galvanized by immersion • Rubber suspension axle • Multiple reinforced cross members for high point loading capacity • Lashing rings mounted on the outer frame, 8 pieces (4 pairs) • Automatic reverse • KNOTT overrun device and parking brake • Sturdy ramp locks • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog lamp • Recessed lighting in rear frame • Rear side marker lights • Automatic centrally mounted jockey wheel • Registration documents: ZBII & COC papers Optional Accessories – available on request: • 100 km/h approval • Spare wheel • Toolbox • Net hooks • Additional lashing eyes • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing possible - Nationwide delivery available - Vehicle registration documents can be sent in advance or temporary plates (Germany) can be provided. - Export plates incl. customs clearance available All descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been a specialist dealer & service workshop for over 30 years for the following brands: Brian James, Blyss, Debon, Humbaur, Hapert, Unsinn, Cheval Liberte, Ifor Williams, Koch, Lorries, Martz, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix and many more. - Subject to errors, mistakes, and prior sale -

Condition: used, Year of construction: 1995, functionality: fully functional, controller model: DNC 80, degree of automation: manual, Jonescheit Hytap 30 with DNC 80 – robust press brake featuring proven control system For sale is a Jonescheit Hytap 30 equipped with DNC 80 control. This is a robust and reliable press brake suitable for use in both workshop and production environments. The machine is designed for precise bending operations and stands out due to its solid construction and user-friendly operation via the DNC-80 control unit. It is an attractive solution for companies seeking a fully functional and immediately available press brake. Specifications: Manufacturer / Model: Jonescheit Hytap 30 Control: DNC 80 Year of manufacture: 1995 Type: manual Condition: used, fully functional Ksdpfx Amoyxakye Nslr Notes: The machine is sold without tooling. Inspection and test run on site are possible. Condition: Used and ready for operation. Conclusion: A solid press brake for operators seeking a field-proven machine with DNC control. Ideal for on-site inspection and functional testing.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 05/2027, electrical fuse: 16 A, opening width: 30 mm, working width: 475 mm, space requirement height: 580 mm, space requirement length: 940 mm, space requirement width: 2,055 mm, type of input current: three-phase, +++ NEW Rondo STM 5304 Dough Sheeter MACHINE NEW +++ Simple manual operation For rolling and laminating all types of dough Foldable tables Rolling thickness from 0.3 to 30 mm Dough sheeter with linen conveyor belts Belt width up to 475 mm Roller width 500 mm Tabletop dough sheeter with 2055 mm table length Electrical system according to VDE standards DGUV V3 tested exclusively by us Dimensions: 2055/850 x 940 x 580 mm (LxWxH) operating / rest position Connection: 400V, 0.5 kW, 16A-CEE plug Weight: 95 kg NEW machine & SAB tested With warranty + spare parts service Options: Maintenance contract Service package Spare parts box Delivery service Commissioning & instruction Kledpfeyalbfjx Am Nor We offer a TOP selection of dough sheeters!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, electrical fuse: 16 A, opening width: 30 mm, working width: 475 mm, space requirement height: 580 mm, space requirement length: 940 mm, space requirement width: 1,560 mm, type of input current: three-phase, NEW Rondo ECONOM 4000 STM 5303 Dough Sheeter NEW TOP MODEL! easy manual operation suitable for sheeting and laminating all types of dough foldable tables rolling thickness from 0.3 to 30 mm dough sheeter with linen belts Kodpsyakk Eofx Am Nslr table-top dough sheeter with 1560 mm table length only DGUV V3 tested by us dimensions: 1560/670 x 940 x 580 mm (LxWxH) operating/standby position Connection 400V, 16A-CEE plug Weight 85 kg NEW machine & SAB tested with warranty + spare part service Option: maintenance contract service package spare parts box delivery service instruction & commissioning

Condition: ready for operation (used), Year of construction: 2013, An in-line workstation Nutek for PCB inspection and manual work is available. Component length range: 80mm-460mm, component width range: 50mm-407mm, component edge support: 3mm, component clearance top/bottom: 30mm/30mm, transfer height range: 925mm-975mm, conveyor speed: 14m/min, machine dimensions X/Y/Z: approx. 1500mm/1100mm/2200mm, weight: approx. 150kg. Documentation available. An on-site inspection is possible. Kledpeyv H E Ssfx Am Njr

Condition: good (used), Filling, capping, and labeling line for "PET" bottles, designed for calm liquids such as oil, vinegar, juices, nectars, etc. The set includes the following components: 1) PROSPOMASZ MONO-30 piston filler - Adjustable output: up to 3,000 bottles (packages/hour) - Number of dosing heads: 8 - Number of capping heads: 4 - Bottle volume: 200 - 1000 ml - Package dimensions: ~ Diameter: 50 - 110 mm ~ Height: 150 - 330 mm ~ Minimum bottle neck diameter: 18 mm - Weight: 1,100 kg - Installed power: 0.75 kW - Year of manufacture: 2003 - Machine dimensions: ~ Length: 1,500 mm ~ Width: 1,150 mm ~ Height: 2,300 mm Kledewyddyopfx Am Nsr The machine is currently set up for 1000 ml bottles. Additional format change parts for 500 ml bottles included. The set also includes many spare parts and seals. 2) Foil labeler (hot-melt roll-fed) - Manufacturer: JAWOTECH s.r.o. - Model: Tech - Lab HM - Capacity: up to 4,000 bph - Weight: 300 kg - Installed power: 4.0 kW - Year of manufacture: 2018 - Machine dimensions: ~ Length: 2,000 mm ~ Width: 1,200 mm ~ Height: 1,800 mm Automatic hot-melt application system by NORDSON, professional grade. The machine is configured for labeling 1 L bottles. Other bottle sizes require entry component adjustment. 3) Slat conveyors with a total length of 850 cm. Used machines, fully operational, regularly serviced. Video footage of the machines in operation prior to disassembly is available. Photos show the current condition in our warehouse.

Condition: used, The Wahli-Stream Feeder TM 530 is a reliable feeder designed for efficient paper handling. Manufactured by Wahli, this model is located in Germany, with pricing available upon request. The machine supports an A2 format and is designed to enhance productivity in printing and finishing operations. Format: 360 420 mm Equipment: AUTOMATIC ENVELOPE FEEDER (with vacuum suction) SUITABLE FOR PRESSES WITH STREAM / SINGLE SHEET FEEDERS ADJUSTABLE VACUUM, HEIGHT & SPEEDDELIVERY CONVEYOR MIN ENVELOPE SIZE: 7.6 x 12.7 CM Ksdpfjvphzpsx Am Nolr MAX ENVELOPE SIZE: 36 x 42 CM