Used Tcs 150T for sale (485)

Condition: good (used), Year of construction: 2009, clamping force: 1,500 kN, Equipment: documentation/manual, ENGEL VC 1050/150Tech Screw: Ø 50 mm CLAMPING UNIT Clamping force: 1500 kN Opening stroke: 607 mm Ejector stroke: 150 mm Ejector force: 61 kN DRIVE Pump drive power: 30 kW INJECTION UNIT 1 Bedpfx Aqoy Rn E Aswell Screw diameter: 50 mm Max swept volume: 422 cm³ Screw speed max: 250 r/min Screw speed current: 250 r/min Injection rate: 210 cm³/s Injection rate incr.: 165 cm³/s Spec. inj. pressure: 1955 bar Spec. inj. pressure+: 2332 bar Nozzle stroke: 350 mm Nozzle cont. pressure: 67.2 kN

Condition: used, power: 125 kW (169.95 HP), Year of construction: 2026, operating hours: 118 h, Operating hours: 118, First registration: 04/21/2026 Max. lifting capacity: 5,000 kg Max. lifting height: 7,800 mm Max. outreach: 4,200 mm Length to carrier: 4,870 mm Width: 2,350 - 2,530 mm Height: 2,530 / 2,590 mm (CS activated) Total weight with load forks: 9,990 kg Total weight without load forks: 9,700 kg Engine: 4-cylinder FPT N454, displacement 5 l, water-cooled Power: 125 kW (170 hp) 2,300 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable flow rate Motor: Swashplate motor EPD PLUS incl. with optional automatic speed increase Mineral hydraulic oil HVI 46 Transmission: 2 gears Electrohydraulically controlled Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: Enclosed cab Split door 360-degree all-round visibility ROPS/FOPS tested GRAMMER air-suspended seat with safety lap belt Heater Front, roof, and rear window wipers Sun visor 4x1 joystick, electronic with capacitive activation incl. direction of travel switch CS = hydropneumatic vibration damping of the cab Telescopic boom: 2-part with electronic end-of-stroke damping (Soft Stop) and telescopic arm suspension (BSS) Carrier: Quick-change system, type "ZM3" with triple locking, hydraulically controllable from the cab Leveling: hydraulically controlled Steering: Hydraulic steering 3 steering modes: All-wheel steering, front-wheel steering, crab steering Drive: Permanent all-wheel drive Axles: Front axle manually adjustable Rear axle oscillating with differential lock Braking system: Disc brakes on all 4 drive axles Automatic parking brake when engine is stopped Frame design: Made of high-strength steel Hydraulic system: Pump with variable flow rate, type "LOAD SENSING" Flow rate max. 160 l/min Pressure max. 250 bar Flow-sharing control block Bledozpcu Tspfx Aqwsl Hydraulic quick-coupling system Electrical system: 12 V Battery with 100 Ah Alternator 120 A Stabilization control: computer-assisted (ASCS system) with fully electronic stability control and simple weighing function, audiovisual signal and overload shut-down as well as implement recognition Display in the display Warning and shut-down in case of overload Tires: 500/70 R24, agricultural lug profile Additional equipment: EU approval as a tractor/agricultural tractor 40 km/h incl. trailer hitch, height-adjustable, self-locking, 37/38 mm pin, incl. connection for trailer lighting Air conditioning LED work lights on the cab (2 front, 2 rear) instead of the standard halogen headlights 360° LED work lights (incl. 2x LED at the end of the first arm + 4 more LED lights on the machine) Double rear hydraulic connection with switchover Location: 54595 Prüm

Condition: good (used), functionality: fully functional, Geka punching machine model Puma 150/ ,punching power 150tm,hole capacity diameter 40 x28,neckline 750mm, in good condition. Bodpfx Aert Rrzsqwjll

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Bledpfow Hxgvsx Aqwjl Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III The system is available twice, price per unit Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Bljdszimgaspfx Aqwsl Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: good (used), Permanent magnet motor, electric motor, servo motor, DC motor, stepper motor, spindle motor, AC servo motor Bljdpfxekm Rm Ro Aqwjl -Manufacturer: Fanuc, AC servo motor with brake from CNC machining center Santenberg GTC S 2 -Type: A06B-0227-B000 -Shaft: Ø 18/13 x 30 mm -Technical data: see photo of the nameplate -Number: 2x servo motors available -Price: per piece -Dimensions: 280/130/H165 mm -Weight: 12.9 kg/pc.

Year of construction: 2012, condition: used, Clamping plate with threaded hole and cross table, clamping angle, T-slot table, rotary table, milling machine table, upper support, top slide, dovetail guide, tool slide, cross table, cross support -Manufacturer: Santenberg, clamping table: milling machine table from CNC machining center GTC S 2 -Linear guide: THK YNA419 -Shaft: Ø 20 x 45 mm -Dimensions: see photos Bledskm Rn Sepfx Aqwol -Total dimensions: 715/530/H285 mm -Weight: 222kg

Year of construction: 2012, condition: good (used), Motor grinding spindle, grinding spindle, high-performance grinding spindle, spindle head -Manufacturer: Santenberg, spindle head from CNC machining center GTC S 2 -Hydraulic Tensioner: : Kitagawa SS1246K / S1246 -Dimensions: see photos -Number: 2x spindle head available Blsdskyy T Nepfx Aqwjl -Price per piece -Dimensions: 830/390/H260mm / 840/350/H280mm -Weight: 110kg / 115kg

Condition: good (used), Mounting plate with threaded hole and cross table, clamping angle, T-slot table, rotary table, milling machine table, top slide, top slide, dovetail guide, tool slide, cross table, cross slide Bledpfx Aqokvrp Eewjl -Manufacturer: Santenberg, upper support tool slide from CNC machining center GTC S 2 -Drive shaft: Ø 20 x 45 mm -Dimensions: see photos -Dimensions: 720/550/H320 mm -Weight: approx. 194 kg

Condition: good (used), Year of construction: 2012, Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyoki, hydraulic control block from CNC machining center Santenberg GTC S 2 -Control valves: HD3-2W-BcA-025AY-WYD2 / HD3-2WD-BcA-025A-WYD2 -Pressure reducing valve: HG3H-P-D3-025Y Bjdektm Dxjpfx Aqwjll -Check Valve: HK3H-P-Q1-025Y -Individual components: see photos -Submission/Price: complete -Dimensions: 300/135/H250 mm -Weight: 14.8 kg

Condition: good (used), Permanent magnet motor, electric motor, servo motor, spindle motor, permanent magnet three-phase servo motor -Manufacturer: Fanuc, AC Spindle Motor from Santenberg GTC S 2 CNC machining center -Type: A06B-1448-B200 -Technical data: see photo of the nameplate Bsdpfx Aqokm Rnrewell -Shaft: Ø 48 x 110 mm -Dimensions: 535/290/H335 mm -Weight: 100 kg

Condition: used, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor, Spindle Motor, Permanent Magnet AC Servo Motor, AC Spindle Motor, AC Servo Motor -Manufacturer: Fanuc, AC servo motor with brake from CNC machining center Santenberg GTC S 2 -Type: A06B-0227-B300 -Power: 1.6 kW 3000 rpm -Shaft: Ø 16/13 x 30 mm -Techn. Data: see photo type plate -Number: 2x servomotors available -Price per piece -Dimensions: 280/130/H165 mm -Weight: 15.2 kg/pc. Bedpfx Aekpwp Tsqwoll

Year of construction: 2012, condition: good (used), Motor grinding spindle, grinding spindle, high-performance grinding spindle -Manufacturer: FS / JE, motor grinding spindle from CNC machining center Santenberg GTC S 2 -FS Heinz Fiege: Type: HSP 190 182.532.01 Bsdpfjkpwqmox Aqwell -JE Jaeger- engineering: Type PS 200/6300min/1 GS-100-0009 -Spindle: JE type 9SH1020A042000 -Dimensions: see photos -Number: 2x spindle available (1x right, 1x left) -Price per piece -Dimensions: 820/610/H530mm / 820/500/H520mm -Weight: 185kg / 180kg

Condition: good (used), Year of construction: 2012, Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyoki, hydraulic control from CNC machining center Santenberg GTC S 2 -Pressure switch: Parker Senso Control SCPSDControl valves: coax 5-VMK 32 NC / 1 824 210 291 Bjdpfx Aqjktm Duswell -Individual components: see photos -Submission/Price: complete -Dimensions: 340/145/H510 mm -Total weight: 14.7 kg

Condition: used, fuel type: electric, Hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyooki, hydraulic control block from CNC machining center Santenberg GTC S 2 -Control valves: HD-2WD-BcA-025A-WY3 -Pressure reducing valve: HG3H-P-D3-025Y Bljdjktm Ekspfx Aqwjl -Check Valve: HK3H-P-Q1-025Y -Individual components: see photos -Delivery/price: complete -Dimensions: 255/185/H250 mm -Total weight: 12.7 kg

Year of construction: 2005, condition: used, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet AC Servo Motor, AC Spindle Motor Blodpfx Aqekyy Ubowol -Manufacturer: Fanuc, AC spindle motor from CNC machining center Santenberg GTC S 2 -Type: A06B-1448-B100 -Techn. Data: see photo type plate -Shaft: Ø 48 x 110 mm -Dimensions: 580/500/H310 mm -Weight: 127 kg

Condition: excellent (used), - Dough capacity: 150 kg - Flour capacity: 95 kg - Dimensions: 920x1340x2140 mm - Stainless steel bowl - 2 electromechanical timers - Power: 3.1 kW - Voltage: 400 V / 50 Hz - Serial number: 124075 - Year of manufacture: 02/2001 Bljdpfx Ajwxvkceqwel

Condition: excellent (used), functionality: fully functional, PALLET CRUSHING LINE : Bjdpozdq E Nsfx Aqwell 2 Shredder 2 conveyors with magnetic drum for nail removal. Used only 200 hours AMIS shredder and 30 hours RUBUST shredder. Like a new and good price.

Condition: new, Year of construction: 2024, ✅ New & in stock ✅ Up to 150mm branch thickness ✅ Shipping possible SCHORR WOOD CHIPPER 150MM BRANCH THICKNESS RR150THX Powerful wood chipper for branches up to 15cm in diameter. Extremely robust and compact. -- 420 cc petrol engine with 12.4 HP -- Self-feeding no additional pressure necessary -- 360° ejection -- With drawbar -- High user-friendliness -- Extremely robust and reliable EQUIPMENT / FEATURES POWERFUL MOTOR Equipped with a 420 cubic meter petrol engine, the RR150THX wood chipper offers outstanding performance that effortlessly handles even the most demanding tasks. The engine is started conveniently via the electric starter or the cable pull. The power of the engine is transmitted to the centrifugal clutch via the V-belts, ensuring a consistently high power output. The engine also has a low oil sensor, which switches the engine off if the oil level is too low to prevent serious consequential damage. HIGH PROCESSING CAPACITY With the ability to shred branches up to 15 cm in diameter, our shredder enables efficient and versatile processing of suitable wood stocks. Thanks to the large opening of the feed hopper, optimum and convenient feeding of the material is guaranteed. The high-quality workmanship and the use of hard-wearing materials ensure a long service life for the shredder, even with intensive use. EFFICIENT CUTTING SYSTEM The blades rotate at a speed of up to 2000 revolutions per minute, which ensures fast and efficient shredding of the material and reduces working time. The blades are made of high-strength steel and are specially designed for the shredder's demanding tasks. EASY MAINTENANCE Access to key components is designed to be particularly user-friendly so that maintenance work can be carried out quickly and easily, minimizing both operating costs and downtime. HIGH MOBILITY Thanks to the integrated drawbar and wheels, the chipper can be moved and positioned effortlessly around your site, making handling, transportation and storage much easier. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR150THX Drive type: V-belt 17x1255La Max. Branch thickness: 150mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Own weight: 255kg Basic dimensions Total length: 2700mm Total width: 1218mm Total height: 1424mm Ejection angle: 360º Engine capacity Displacement: 420ccm Power max: 9,1kW / 12,4PS Starter: Reversing starter Bedpfx Aqjt Ivl Aswell Our expert team will be happy to answer any questions you may have about the SCHORR HOLZHÄCKSLER 150MM ASTSTÄRKE RR100THX. We look forward to hearing from you and assisting you with advice. Are the purchase costs for a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, which you can take advantage of, please contact us.

Condition: ready for operation (used), Bosch SM 20/30GTC servo module, used, shows normal signs of wear and tear, 100% functional. Blodpfji D Ud Dox Aqwol

Condition: ready for operation (used), Bosch SM 10/20-TC servo module SN:481559, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! Bedpfxex Eqylo Aqwell

Condition: ready for operation (used), Bosch SM 20/30 GTC - SM 20 / 30 GTC pulse inverter 1070068043-207, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Blsdstqi Dpepfx Aqwjl

Condition: new, I sell Lowara 15SV17P150T 8-24m3/h 15Kw pump, New. I have different power of Lowara pumps. We can help arrange a cost-effective shipping company or courier for you. Bjdpfx Ajvccyysqwoll

Condition: good (used), Year of construction: 2011, Heated surfacefinishing machine Bodpfx Aefndpnsqwjll for Zink-magnesium coating Tank capacity : 150 l Heating power: 20 kW Weight: 1230 kg

Condition: used, Year of construction: 2006, gearing type: other, first registration: 01/2006, color: orange, mileage: 1,001 km, empty load weight: 800 kg, driver cabin: other, Vehicle location: Bovenden, Superstructure: Gmeiner mounted salt spreader STA 4000 L TC approx. 4 m³. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! Bsdow Hdtuspfx Aqwjll