Used Tederic Injection Molding Machine for sale (66,097)

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/1100 Injection Moulding Machine Year of manufacture: 2011 Injection unit Two short-barrel cylinders for plastic injection. Direct screw drive; ceramic heaters on cylinders. Standard screw geometry L/D = 22. Hardened and nitrided screw, diameter Ø 90 mm. Maximum injection volume: 2,740 cm³. Maximum shot weight (PS): 2,520 g. Open nozzle: front radius R = 35 mm, channel diameter Ø 6 mm, mounting thread M55×3. Increased specific injection pressure: 2,180 bar. Plasticizing capacity: 85 g/s (for polystyrene, screw Ø 90 mm). Injection unit equipment: M3-type barrel – bimetallic, increased corrosion and wear resistance, permissible temperature up to 350°C. Blsdpfjw U Taxjx Aqwjl S4V-type screw – heat-treated, chrome-plated, with armoured edges; increased resistance to corrosion and wear. Special G11.3 screw geometry optimized for processing. R12 non-return valve (multi-ball, recommended for PC, PMMA, ABS). Clamping unit (clamping system) Hydromechanical dual-platen clamping system. Four short high-pressure cylinders on the nozzle side. Four tie-bar tensioners on the ejector side. Two diagonally mounted fast movement cylinders on the clamp unit. Opening stroke dependent on mould height (dynamic stroke adjustment). Moving platen guided on the machine frame – ensures platen rigidity and parallelism. Clamping force: 11,000 kN. Mould mounting platen dimensions: 1,850 × 1,810 mm. Tie bar spacing: 1,400 × 1,150 mm. Mould mounting height: 600–1,200 mm. Maximum opening stroke: 1,800 mm. Mould cooling system: 10 water circuits with rotameters (max. 30 l/min each). Special execution of platens with additional holes for ejector systems in two arrangements (horizontal and vertical). Core pull drives (core pull systems) Independent hydraulic core pull drives: 2 units on the moving platen, 2 units on the fixed platen. Hydraulic pressure reduction systems for core pulls. Independent pneumatic core pull drive on the moving and fixed platens. Hydraulics Pump station with electrohydraulic pressure and flow regulated pumps, and fixed delivery pumps. Energy-saving proportional hydraulics with precise flow and pressure control. Servo valve for injection speed, holding pressure, and back pressure control. ECODRIVE system – energy-efficient hydraulic drive enabling parallel auxiliary movements with minimal energy consumption. ENGEL Viper 40 Robot Integrated Cartesian robot, operated via CC200/RC200 control panel. Three servo-driven axes: X = 700 mm (extendable to 900 mm), Y = 1,000 mm (tandem up to 1,900 mm), Z = 1,880 mm (extendable up to 5,720 mm). Payload up to 17 kg, accuracy ±0.05 mm. C axis: 0–90° rotating gripper, pneumatic drive. B axis: rotation of head around lift axis (Y), servo motor drive, range +90° / –180°.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale is an injection moulding machine from the manufacturer Arburg, model 520 C 2000-800, year of manufacture 02/2006. Bledpfx Aqow Hpwrswjl The machine is in a very good, well-maintained condition. An on-site inspection is possible at any time by prior telephone arrangement.

Condition: good (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 318 cm³, injection weight: 289 g, Year of manufacture: 2005 Bjdpfszkqf Ajx Aqwjll Operating hours: 80,228 h Clamping force: 160 tons Distance between tie bars: 520 x 520 mm Screw diameter: 45 mm Injection volume: 318 ccm Injection weight: 289 g for PS Equipment: Krauss Maffei robot, core pull, Euromap, 3 additional injection units

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Bodpezvm Dlefx Aqwell Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: excellent (used), Year of construction: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, bore: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight (max. mould open width): 1150 mm Ejector stroke: 200 mm Blodsw U Rcdepfx Aqwsl Ejector force (forward/backward): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Heater capacity: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke per Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Bedpfxox Up Rns Aqwell Technical Data Clamping Unit Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ L/D screw ratio: 20 Specific injection pressure: 1,794 bar Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Screw diameter: 120 mm Dosing stroke: 4,800 mm Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Bledpfxox I Rqcj Aqwel

Condition: good (used), Year of construction: 2001, screw diameter: 30 mm, clearance between the columns: 420 mm, injection pressure: 1,995 bar, injection weight: 96 g, mold height (min.): 200 mm, General information: Year of manufacture: 2001 Control system: NC4 Weight: 3950 kg Dimensions (length × width × height): 4.2 × 1.4 × 2.0 m Injection unit: Type: … / 200 Screw diameter: 30 mm Screw L/D ratio: 20 Specific injection pressure: 1995 bar Injection volume: 106 cm³ Injection shot weight: 94 g Clamping unit: Type: 60 / … Clamping force: 60 t Bledpszt Ivdsfx Aqwol Platen dimensions: 600 × 600 mm Distance between tie bars: 420 × 420 mm Mold height: 200 mm Opening stroke: 550 mm Maximum platen distance: 750 mm

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Bjdpfx Aqozt Ih Towoll Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Blsdpew U Sz Ijfx Aqwjl Pneumatic cores: 1+1 GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Bodpovxh Iusfx Aqwsll Immediately available from stock

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Bedjyddy Ispfx Aqwell

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg Bljdpfex Sqi Hex Aqwjl TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: used, Year of construction: 2019, Injection molding machine Demag EL Exis SP 1000/1195-6300, year of manufacture 2019. Blodpjzxxhuefx Aqwel

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Control system: Moasic Control, Tool opening stroke: 850 mm, Screw diameter: 60 mm, Injection pressure: 2144 bar, Clamping force: 2500 kN, Bledpfx Aqjzub Hrewol Maximum shot weight: 694 grams, Installed heating capacity: 22.7 kW, Hour meter: 5100 hours, Machine weight: 18,000 kg.

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from cleanroom production (pharmaceutical sector) - Equipped with 820 mm rotary table - Including GEKU Robot SR 500 ST (x=600, y=1400, z=2500 mm) - Only 33,107 operating hours - Safety enclosure / protective cage - Horizontal conveyor belt - Hardly any paint damage / almost as new in appearance - Fully operational The machine can be inspected under power by prior arrangement. Technical Specifications Manufacturer: Engel Model: V 330H/80V/130 Combi 2-Color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Weight: 10,600 kg Functionality: fully operational Condition: excellent Special features Control system: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 cm³ Clamping force: 1300 kN / 130 tons Tie bar spacing: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor power: to be provided Heating capacity: to be provided Total power: to be provided The machine is immediately available from our warehouse in Hannover, Germany, and has been tested. Extras 2-component / 2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety enclosure / protective cage CC 200 control, German and English languages GEKU Robot Details SR 500 ST Control: Simotion X axis: 600 mm Y axis: 1400 mm (vertical) Z axis: 2500 mm (horizontal) A flip axis: SWM 45 C axis: Servo Gripper: SWS16 B axis: not available Warranty Warranty up to initial commissioning Blsdpfeub Umqox Aqwjl Loading/Shipping Free loading onto buyer's truck or free delivery against freight reimbursement from our warehouse in Hannover, Germany Financing – on request – leasing option Price on request

Condition: excellent (used), Year of construction: 2010, ARBURG 370 U 600-290 injection molding machine Bledpfx Aqezw Azvjwsl Year of manufacture: 2010 Clamping unit Clamping force: 600 kN (60 tons) Distance between tie bars (H × V): 370 × 370 mm Dimensions of mounting platens (H × V): 510 × 510 mm Minimum mold height: 200 mm Maximum daylight opening: 600 mm Opening stroke: 400 mm Ejector stroke: 125 mm Ejector force: 30 kN Injection unit Screw diameter: 35 mm Injection volume: 144 cm³ Injection shot weight (PS): 132 g Maximum injection pressure: 2000 bar Screw L/D ratio: 20 Screw torque: 450 Nm Maximum injection speed (PS): 140 g/s Number of heating zones: 4 Nozzle stroke: 240 mm Dimensions and weight Machine dimensions (L × W × H): 3.80 × 1.45 × 2.12 m Total weight: approx. 3,500 kg

Condition: excellent (used), Year of construction: 2010, Engel DUO 5550/1100 Injection Moulding Machine Year of manufacture: 2010 Clamping force: 11,000 kN Mounting platen dimensions (HxV): 1850 × 1810 mm Distance between tie bars (HxV): 1400 × 1150 mm Mould height (min–max): 600 – 1200 mm Maximum opening stroke: 1800 mm Blsdpfjw Tc Hxsx Aqwol Screw diameter: Ø 90 mm Injection volume: 2740 cm³ Injection weight (PS): 2520 g Injection pressure: 2180 bar Power supply: 3 × 400 V, 50 Hz Control system: ENGEL CC 200 A02 (15″ touch screen), 2 languages (PL/EN) Robot: ENGEL ERC 63/1F, RC 200 — range X: 700 mm, Y: 1000 mm, Z: 1880 mm, payload 30 kg

Condition: used, Arburg unscrewing unit Model: 118044 Machine number: 12915769 Year of manufacture: 2010 Blsdezpzh Sspfx Aqwol Condition: used Functionality: fully functional Description The used unscrewing unit (2 directions, for 270C / 370C) from Arburg is used to automatically demold plastic parts with internal or external threads from the injection molding tool by precisely unscrewing the thread core during or after the opening process. Medium size Dimensions: 150x250x400 mm Weight: 30 kg

Condition: good (used), Year of construction: 2006, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM420-1900C2 Baujahr: 2006 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Schnecken DN: 70 mm Max. Hubvolumen: 1.047 cm³ Spritzteilgewicht: 853 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Roboter SEPRO, Typ: SR4030 S3 VISUAL, Baujahr: 2006 12- Fach Heisszonenkanalregelung Blodpfxozl Sfmj Aqwol Schnittstelle Temperiergerät

Condition: like new (used), Year of construction: 2019, operating hours: 400 h, clamping force: 1,000 kN, screw diameter: 32 mm, displacement volume: 103 cm³, injection pressure: 2,200 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, opening stroke: 350 mm, number of injections: 1, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S100iA – like-new, fully electric precision injection molding machine, manufactured in 2019, with only 400 operating hours. Your advantages: • 1,000 kN clamping force • FANUC 31i-B CNC control with a 15-inch touchscreen • 32 mm screw and 103 cm³ injection volume • Injection speed up to 200 mm/s, maximum 2,200 bar • Hardened W/C plasticizing unit – for temperatures up to 350 °C and up to 30 % glass fiber • Euromap 67 robot interface Tool space and clamping unit: • Plate dimensions 660 × 610 mm • Tie bar spacing 460 × 410 mm • Mold height 150–620 mm, extended version • Opening stroke 350 mm • Ejector stroke 100 mm, ejector force 25 kN Equipment includes, among other things: AI pressure and dosing control, tool and ejector protection, backflow monitoring, automatic tool height adjustment, energy consumption measurement, four-circuit flow meter, hopper slide, three-color LED signal light, three air valves, and cascade control for up to eight needle gate valves. Hungarian operating manual and warning instructions are available. A robot is not included in the scope of supply. Inspection by appointment. Further technical documents and the offer are available upon request. Blsdpezrikmofx Aqwol

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Bljdpeygk Eisfx Aqwol

Condition: new, Engel bimetallic screw cylinder, new and unused Diameter: 105 mm LD 22 Unit 4550: 3380 cm3 Bledox Up U Tspfx Aqwjl Unit 5550: 3700 cm3

Condition: used, Year of construction: 2013, functionality: limited functionality, overall weight: 18,500 kg, We are offering this used KraussMaffei 200-750 EX injection molding machine, manufactured in 2013. Type: KM 200-750 EX International size designation: KM 750 EX/200 Year of manufacture: 2013 Machine No.: 61019432 Machine weight: 18,500 kg Please note: Bedpfjzxk Rujx Aqwjll The machine is sold without machine conformity, as the safety door on the operator side is missing. The control panel is mounted on the rear of the machine. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY VC 650/150 Tech injection molding machine ENGEL ERC 13/1-F robot – SET 1 Year of manufacture: 2005 Clamping unit design: ENGEL tie-bar-less Clamping force: 1,500 kN / 150 t Control system: ENGEL CC200 – color touchscreen Injection unit: 650 Screw diameter: Ø45 mm Screw stroke: 200 mm Screw L/D ratio: 20 Injection volume: 318 cm³ Injection shot weight: approx. 290 g PS Maximum injection pressure: 2,040 bar Maximum screw speed: approx. 315 rpm Maximum injection flow rate: approx. 179 cm³/s Mold opening stroke: approx. 500 mm* Maximum distance between platens: approx. 700 mm* Nozzle stroke: 350 mm Nozzle clamping force: 67 kN Cylinder heating power: approx. 13.3 kW Number of heating zones including nozzle: 5 Hopper capacity: approx. 80 l Machine weight: 9,500 kg Robot: ENGEL ERC 13/1-F Blsdpfezxqycjx Aqwol Robot manufacturer: ENGEL Robot year of manufacture: 2005