Used Teka Welding Smoke Suction for sale (8,032)

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Ledpfenyhvqjx Akujrl Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” Lsdpfxoy Efmgs Akuorl All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Condition: used, functionality: fully functional, Year of construction: 2005, Concrete mixer TEKA TZK 2.0 Mixing capacity: 2 m³ Ceramic lining inside Lrodpeywn T Tefx Akusl Not yet dismantled

Condition: excellent (used), Machine ready for operation. 1000-litre tank. 500-litre tank. The station was used for cleaning a soup and mayonnaise production line. Please check my other listings as well. Lsdpfx Aksytm Tiouorl

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Lrjdpfsurlcrsx Akuol Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: new, Year of construction: 2026, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Lredpfxon Sl D Rs Akujl

Condition: not inspected (used), functionality: unexamined, total height: 860 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 1,500 kg, hole diameter: 16 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Number of holes: 800 Hole diameter: 16 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 860 mm Lrsdpfx Akoym Rytsujl Weight: 1,500 kg EQUIPMENT Lot clamping devices External reference: CES - Lot 91

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point Lredpfx Akol Dw U Doujl capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h Ljdpfx Aeib Dadokusrl motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Lodpfxerhidmo Akusrl Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Year of construction: 2000, condition: good (used), Stock number: 2739 Manufacturer: TEKA Year of manufacture: 2000 Type: PP-DC Number: 201320 Volume flow: 320 m³/h Max. Negative pressure: 22.000 Pa Connection diameter: 50 mm Equipment: mobile, portable Accessories: hose 3.000 mm Lodpfx Aemf Uzxjkuerl Connection: 1.2 kW 230 V Weight: approx. 40 kg Dimensions: 300 x 300 x 850 mm without hose

Condition: excellent (used), load capacity: 3,000 kg, table load: 3,000 kg, Equipment: foot remote control, Belgium Welding 3 To 3,000 kg load capacity welding positioner, complete set Horizontal load capacity 3,000 kg, tilted load capacity 3,000 kg Stepless tilt and speed adjustment Lrjdpfx Ajxbhrhjkuel Very robust construction Speed steplessly adjustable from 0.05 to 0.7 rpm, digital display Turntable diameter: 1,400 mm Height horizontal: 1,450 mm, tilted to center: 1,200 mm Length: 2.0 m x Width: 2.0 m Hand-held remote control with digital display and foot remote control

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) Lodpohp S Trjfx Akujrl filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction Lredpfx Ajkm Rynjkujl (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg Ledpsxy Hqtsfx Akuorl

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Two used TEKA scrapers are offered. 1. THS 4020, built in 2009, scraper arm: 16.00 m, 2. THS 6022, built in 1993, scraper arm: 16.00 m. Lrjdpfxev Tb A Io Akuol Fully functional. For further information, see the rating plate.

Condition: used, This is an LSQ5X welding power source from SKS Welding Systems, together with a Weld Process Controller MULTIPROCESS - Q80 and an SKS Frontpull 8 (23°) Lrjdpeuxbx Dsfx Akuol

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, Lodpfexlr Tdox Akuorl air operated Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS Included with safety glass and two button pust operational system. with all safety system integrated and working table. WELDING NOMINAL POWER - 56 kWA AT 50% THROAT IN 450mm Specifications Manufacturer SCHLATTER Model P1-42-11-22 1C VU122S S55S Year 1989 Condition Used Stock Number 0048 Connection 380V/50Hz S max 135 kWA Arm distance min /max 218/468 in mm Closing force 4KN Lrsdpfx Akevk Ukmsuel Cooling water requirement 6 liter / min

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Description WE OFFER ORBITAL WELDING GUN TO WELD SHEET TO TUBE CAN BE USED FOR DIFFERENT APLICATIONS, TUBE TO SHEET. TUBE TO TUBE Specifications Manufacturer POLYSOUDE Ljdpevlarrefx Akuerl Model TS - 2000 Condition Used

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, WE OFFER AN NICE CONDITION TWIN ROBOTI WELDING CELL YEAR 2012, MACHINE WAS USED IN PRODUCTION FROM 2012 TO 2019 ONLY 7 YEARS IN USE . Lsdpfjvkkhbex Akuerl MACHINE WE CAN PUT FOR CUSTOMER ON GROUND, START UP AND MADE AN OPERATORS TRAINING POSITIONER IS HORIZONTAL TURNING: SEE VIDEO LENGHT OF POSITIONER: 4 METERS MAX LOAD PER SIDE PALET 750KG ROBOTS 2X OTC MODEL: NV61-NEFN ROBOTS CONTROL: AX-21 CV0000 WELDING MACHINES 2X FRONIUS CMT TOOLINGS PALET CAN BE CHANGING WE CAN OFFER ALSO TOLINGS FOR THE CUSTOMER PRODUCT

Condition: excellent (used), functionality: fully functional, Description WE OFFER AN NICE CONDIUTION NIMAK WELDING GUN 22 Kwa power with balanser and top traverse rails. READY TO WORK. EASY TO OPERATE. Machine is still in production working Complete with balanser and traverse. Specifications Manufacturer NIMAK Model ZT 22/1 Lodpfx Aksvk Ul Reujrl Condition Used Power 22 kwa Kuhl w. Q 4 L/MIN

Condition: as good as new (ex-display), machine/vehicle number: 20170140, TEKA AirTracker Basic - Room Monitoring System Professional room monitoring system that measures particulate matter, temperature, humidity, and noise levels. More than just a dust measurement system! Certified measurement sensors High-visibility LED display for dust levels Individual configuration of dust thresholds Lodpfx Aksv Taq Rouorl Dedicated TEKA Connect Wi-Fi AirTracker Control of fans or filter systems from the TEKA series Display and analysis of measurement data Display and readout of measurement data Trend display for evaluation / data logger Readout of data via web interface Wall-mounted, ceiling-mounted, and floor-standing units. One device – many possibilities! Built-in high-performance PC of the latest generation (MX6 with 2 cores) Wi-Fi control/UART The innovative, intelligent room monitoring system of the future. The European division of the World Health Organization (WHO) has urged the EU to impose stricter air quality standards. The innovative, intelligent solution from TEKA: AirTracker indoor air monitoring is used. The newly developed sensor in the TEKA AirTracker series detects particles smaller than 100 nanometers and impresses with its evaluation from 0 to 30 mg/m³ with an accuracy of ± 0.1 mg/m³, documented and with a test certificate. Creating trust. High-tech sensors guarantee reliable measurement values and safety. Individual settings of the threshold/limit values set the course for a secure future. As soon as the configured threshold is reached, the sensor indicates the current status of the particulate matter concentration via two highly visible, large LED strips with a traffic light function. The optionally available AirController can be used to control fans or filter systems from the TEKA series, depending on the particulate matter load. Ready-to-Go: Industry 4.0 – TEKA AirTracker. Companies can document compliance with employers' liability insurance regulations, manually or using the data logger (optional), in advance of BG inspections. Always keep an eye on prevention and employee health – building trust. Dust, whether coarse or fine – up to nanoparticles, particulate matter categories PM2.5 for A dust or PM10 for E dust – the TEKA AirTracker, with its newly developed sensor, monitors particulate matter within a radius of over 30 meters with an accuracy of +/- 0.1 micrometers and certifies this – feel safe. The TEKA AirTracker comes standard with other innovative sensors. It also measures air temperature, humidity, and sound levels. Networked sensors/actuators are the future of Industry 4.0. TEKA is already embracing this networked technology. TEKA sensors/actuators are already an integral part of industry. With a suitable smartphone, tablet, or PC, you can download the TEKA AirTracker app, which displays the current room temperature, humidity, particulate matter levels, and noise levels in the ambient air. Various setting and function options in the app round out its user-friendliness and functionality. There are many "dust sensors" available. However, quality and safety can only be achieved through the networking of certified sensors that document the measurement data.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 24 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: the Airtech handheld laser welding system with 3,000 watts of power! Ideally suited for demanding sheet metal fabrication – efficient, safe, and highly flexible in use. Highlights and Features: - Power: 3,000 watts for top welding quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – optimally positioned for comfortable operation - Robust housing, intelligent internal layout for maximum service life - Touchscreen display for easy operation - Optional automatic multifunction wire feeder - Safety features: three-color alarm, safety interlocks, misuse protection mechanism - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Advantages - Safe operation thanks to extensive protection mechanisms and alarm systems - Flexible applications including automatic wire feeding and robotic integration - Low operating costs and easy maintenance through well-designed technology and durable components Lodpfxowzv D Ie Akusrl For more information or a consultation, the Airtech team is happy to assist you!

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning Ljdpfx Akeu Aafdeuerl - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h