Used Telco Light Grid 2 Pieces for sale (87,034)

Condition: good (used), Year of construction: 2006, total length: 4,000 mm, total width: 2,500 mm, plate height: 300 mm, Manufacturer: PAMA Type: Floorplates Year of manufacture: 2006 2 units available, matching cast iron floorplates/bedplates Integrated levelling chambers Can be used in combination with PAMA SPEEDRAM 1000, Machine 8643 Testing area Mounting area Measuring area Calibration area Specifications Metric / US Standard Length 4000 mm Width 2500 mm Rcedpfx Alswpvcyoaof Height 300 mm Number of T-slots 10 T-slot spacing 250 mm T-slot size 26 mm Weight per plate, approx. 7800 tons Number of matching pieces 2 Dimensions (estimated) Length 4000 mm Width 2500 mm Height 300 mm Weight 7800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual condition. We recommend that you verify all important details.

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 2 pieces -Tire size: 18 x 7 - 8 SC 10 RIM 4.33 R -Bolt circle: Ø 140 x 18 mm -Hub bore: Ø 111 mm -Price/Fee: complete Rsdpfx Aozfvuxslaocf -Dimensions: Ø 445 x 155 mm -Weight: 25 kg/piece

Condition: used, Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor clamping rail: 2 pieces Rcodpfx Ajt Rl U Ejlaef -Groove width: 16 mm, length 370 mm -Hole spacing: 460 mm / Ø 16 mm -Dimensions: 505/55/H70 mm -Delivery/Price: complete -Dimensions: 505/55/H70 mm -Weight 3.4 kg/piece

Condition: good (used), Stop for press brake, bending machine, guillotine shear, drive shaft Rcedpfx Aogxnkkolaef -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Withdrawal device: for square notching dies -Dimensions: see photos Rsdpfxeznk R Ts Alajcf -Quantity: 2x pullers, 1x with fine thread -Submission/Price: complete -Dimensions each: 200/140/90 mm -Weight: 2.4 kg/pc.

Condition: good (used), Collet chuck, tool holder, tool holder, milling chuck, milling tool -Milling chuck: SK50 2 pieces -Type: various designs, see photos Rcedpjvahq Eefx Alajf -1x Tool holder: Ø 32 mm -1x Tool holder: Ø 40 mm with milling cutter Ø 44.5 mm -Price/Sale: complete -Dimensions: 315/200/H100 mm -Total weight: 10.8 kg

Condition: used, Conveyor screw, transport screw, screw conveyor, conveyor technology, trough conveyor screw, trough conveyor screw -Conveyor screws: 2 pieces, 1x right / 1x left -Design: stable -Screw length: 555 mm without holder -Screw diameter: 315 mm -Screw pitch: mm -Tube diameter: 115 mm -Hole: Ø 35 x 80 mm Rjdpfx Aet E D Nkelaecf -Price/Delivery: complete -Transport dimensions: 550/315/H635 mm -Total weight: 58 kg

Condition: good (used), Plate shears cutting blades, replacement blades for plate shears, replacement cutting edges, cutting blades, shear blades -Cutting blades: Replacement blades for Atlantic ATS 3006 guillotine shears, 2 pieces -Cutting length: 3120 mm Rsdpoxf Dpkjfx Alascf -Hole spacing: 195 mm / M14 see photos -Dimensions: 49/19/3120 mm / 49/19.4/3120 mm -Price/Delivery: complete -Transport dimensions: 3200/120/H190 mm -Total weight: 57 kg

Condition: good (used), PLC control, digital output, digital output, relay output -Manufacturer: Siemens, Simatic S5 digital output 2 pieces -Type: 6ES5 441-8MA11 -Bus module: Siemens 6ES5 700-8MA11 -Number: 6x double module available Rsdpomch Tpjfx Alajcf -Price: per piece -Dimensions: 160/90/H125 mm -Weight: 0.7 kg/piece

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk, solid rubber tires with rim, 2 pieces -Tire size: 21x7x15" / (534x178x381) -Rim: Type MH -Hub: Cone Ø 68-74 mm -Hole circle: Ø120 mm M8 / Ø300 x 11 mm -Gear ring: Dimensions see photos / technical drawing Rcodoxd Ttcopfx Alasf -Price/Fee: complete -Dimensions each: Ø 534 x 205 mm -Weight: 91 kg/piece

Condition: used, Transformer, transformer, converter, three-phase autotransformer -2 pieces: three-phase transformers DTST 7.5 -with: additional electronic modules -Primary: 400 V -Power: 5.5 kVA each -Dimensions: total 200/430/H740 mm -Total weight: 164 kg Rodpfx Alofk Ez Teajcf

Condition: good (used), Machine foot, machine feet, spring elements, silent blocks, vibration dampers, steel spring vibration dampers, vibration isolators -Spring elements: 2 steel spring vibration dampers for machine tools and systems Rsdpfx Aozt Igcolascf -Spring element: Ø 128 mm -Total height: 215 mm -Submission/Price: complete -Dimensions: Ø 128 x 215 mm -Weight 4.8 kg/piece

Condition: used, tires, solid rubber tires, forklift tires -Manufacturer: Gumasol, solid rubber tires type GLE 2 pieces -Tire size: 8.25-15 -Rim: 6.0-15 -Bolt circle: Ø 225 x 32 mm -Recess: Ø 165 mm -Price/Delivery: complete Rcedpfxeur Amns Alajf -Dimensions: Ø 780 x 225 mm -Weight: 110 kg/piece

Condition: used, 2 pieces of BERNADO RB 3 roller conveyor – used Steel rollers ----- Technical data ----- Roller conveyor length: 1,800 mm, Roller diameter: 38 mm, Height adjustment: 640 - 1,100 mm, Load capacity: 500 kg Rcodjzf Ndyopfx Alasf

Condition: good (used), Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Manufacturer: Reinecker, hob cutters, 2 pieces -Type: Ø 70 mm / Ø 67 mm KHSS-E -Hole: Ø 27 mm -Price/Fee: complete Rcjdpfx Aley D Nkmsaof -Transport dimensions: 135/70/H70 mm -Weight: 2.1 kg

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Kumaneko, solid rubber tires, 2 pieces with rim -Type: Widewall -Tire size: 27x10-12 -Bolt circle: Ø 220 x 27 mm Rodpfov Dd Eyox Alajcf -Recess: Ø 160 mm -Price/Sale: complete -Dimensions: Ø 600 x 255 mm/pc. -Total weight: 158 kg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Rodei Rixkepfx Alaocf Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: used, Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires 2 pieces -Tire size: 7.00-15 Rim 5.5-15 532/121-2 -Bolt circle: Ø 220 x 20 mm -Recess: Ø 160 mm Rcsdpfx Aleutuugoaof -Price/Delivery: complete -Dimensions each: Ø 730 x 180 mm -Weight: 85 kg/piece

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 1,000 kg, total length: 1,240 mm, total width: 835 mm, Hello, I sell sheeted containers - metal 1/2 new - dimensions 1240 x 835 x 500 mm - weight of the container about 55 kg Rodpfx Asupumuslaecf - payload 1000 kg - new containers - price 115 eur/net/unit. - sale only against VAT invoice

Year of construction: 2017, condition: excellent (used), machine/vehicle number: SI8x4125, DEMAG KBK crane canopy crane runway with dimensions approx. 6x5m (5m bridge) This crane is available several times ! Rcodpsupwa Refx Alasf Payload / lifting capacity 125 KG - 0,125to Technical data of the system: Crane runway made of Demag KBK1 + KBK2L rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Crane is with internal power supply incl. 125KG Demag DC chain hoist - lifting height approx. 3.5m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: new, Model Name Rcedjk D Nyijpfx Alaof Anfassystem UZ12 ULTRALIGHT

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009 Rcjdpfx Aloirmulsaef

Condition: good (used), Tailstock Taper size: MK 2 Quill travel: 30 mm Height-adjustable Center height of 250 - 285 mm Tiltable from -5 degrees to +15 degrees Rcjdpedlp Txofx Alaef Base area: 230 x 155 mm Weight: 27 kg

Condition: used, Year of construction: 2014, The portal-type hydraulic press is designed for bending or straightening, as well as for processing finished welded components, and for disassembling mining machinery and other equipment. It is used in mechanical, production, and repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of manufacture: 2014 Technical specifications: Rjdpfjhktq Ajx Alascf Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of gate cylinder 1: 2 x 300 mm Diameter of gate cylinder 2: 2 x 250 mm Force of gate cylinders 1: 2 x 1768 kN Force of gate cylinders 2: 2 x 1228 kN Maximum clearance: 1240 mm Stroke of working cylinders: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - four working cylinders - gate movement cylinder - working cylinder movement cylinder - power unit with T-100/30 pump (year 2006, overhauled in 2011) Technical condition: used, requires inspection.

Condition: new, For sale: high-quality electric motor from the renowned brand WEG, Premium IE3 series. The motor is new, unused, and has been stored in a warehouse – condition is very good. Ideal for pumps, fans, industrial machinery, and workshop applications. ⚙️ Technical specifications Manufacturer: WEG Model: AL90S L 02 Power: 2.2 kW Rodjyvamnspfx Alascf Speed: 2855 rpm Voltage: 230 / 400 V Frequency: 50 Hz Current: approx. 7.8 / 4.5 A Efficiency class: IE3 Degree of protection: IP55 Duty type: S1 Flange version: B5 Shaft diameter: approx. 24 mm Weight: approx. 22 kg Year of manufacture: 2018