Used Ticab Winter Service Equipment for sale (50,736)

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse. Kdjdpfszut Axsx Ai Rer

Condition: good (used), Year of construction: 2023, functionality: fully functional, TEXA Konfort 760 Touch RID incl. integrated refrigerant analysis for refrigerant R1234yf KONFORT 760 TOUCH, complete with 10" touch display, 20 kg refrigerant tank, 100 l/min capacity, two-stage vacuum pump, and Bluetooth and Wi-Fi interfaces. Equipped with a vehicle database, protective cover, and manual. TECHNICAL SPECIFICATIONS Suitable for R134a or R1234yf Suitable for BUSES (760 Touch BUS) Fully automatic service control Automatic leak detection Refrigerant measurement with electronic scales Oil contamination prevention system - ATB (Air Tight Bottle - patented) Automatic oil management with electronic scales Measurement of recovered oil quantity by electronic scale Compatible with hybrid vehicles Automatic maintenance management (DATABASE) Manual maintenance control Safety system FPS (Fan Protection System) Internal flushing when changing oil type Service report printout via Wi-Fi 10" touch display Suitable for KONFORT APP Refrigerant tank 20 kg (760 TOUCH) Refrigerant tank 30 kg (for 760 BUS TOUCH) Filling accuracy +/- 15 g High refrigerant recovery rate (over 95%) Two-stage vacuum pump Automatic oil container recognition (patented) Scales locking system Operating mode: DATABASE Operating mode: MANUAL SERVICE Operating mode: MY DATABASE Multilingual software Automatic service hose compensation Automatic maintenance management Simplified maintenance Automatic control of non-condensable gases Remote customer support Kdjdpfx Ajwzhnrsi Rsr Highly accurate automatic oil injection Automatic updates Incl. POE oil container for hybrid vehicles Incl. thermal printer

Condition: new, functionality: fully functional, gearing type: other, fuel type: diesel, color: green, emission class: none, mast type: other, brakes: other, suspension: other, Year of construction: 2026, Equipment: low noise, TICAB Bitumen Emulsion Sprayer – 200 L / 500 L | Professional Asphalt Repair Equipment Designed for professional use, this bitumen sprayer ensures uniform application of bitumen emulsion, asphalt emulsion, tack coat, and bonding agents, significantly improving adhesion and extending pavement service life. TICAB Bitumen Emulsion Sprayer 200 L and 500 L is a reliable and efficient solution for road maintenance, asphalt repair, pothole patching, crack sealing preparation, and surface dressing. Key Advantages: Ksdpfsx Uxfusx Ai Redr • Tank capacity options: 200 liters / 500 liters • Precise spraying system for even and controlled application • Compact, mobile, and easy to operate • Suitable for bitumen emulsion • Ideal for road repair companies, municipalities, contractors, and utility services • Reduces material consumption and labor costs • High-quality components for long service life • Manufactured by TICAB – proven European road equipment manufacturer Typical Applications: • Pothole repair and patching works • Crack sealing preparation • Asphalt bonding layer before paving • Surface dressing and maintenance works • Road, parking lot, driveway, and industrial area repairs TICAB Bitumen Emulsion Sprayers are a cost-effective choice for companies looking for professional asphalt maintenance equipment with excellent performance and durability. Contact us for price, availability, delivery options, and technical details.

Condition: new, functionality: fully functional, power: 15.5 kW (21.07 HP), gearing type: other, fuel type: gasoline, color: green, overall weight: 4,000 kg, Year of construction: 2026, Equipment: all wheel drive, hydraulics, low noise, TICAB MP-1100 Asphalt Paver | Professional Road Construction & Asphalt Paving Machine Designed to deliver smooth, uniform asphalt placement with maximum efficiency, the MP-1100 is the ideal choice for contractors, municipalities, and infrastructure companies seeking durable and cost-effective paving equipment. Available with either a wheeled or tracked chassis to suit your specific jobsite requirements, the MP-1100 provides exceptional maneuverability, precision, and performance across a wide range of paving applications. Boost your paving productivity with the TICAB MP-1100 Asphalt Paver — a reliable, high-performance solution engineered for professional road construction, asphalt resurfacing, and pavement maintenance projects. Key Advantages ✔ Available in wheeled or tracked configuration for maximum jobsite flexibility ✔ Precision paving technology ensures smooth, uniform asphalt surfaces ✔ Compatible with Hot Mix Asphalt (HMA) ✔ Compact design with powerful output for urban and confined work areas ✔ High productivity with reduced labor requirements ✔ Robust, heavy-duty construction for long service life ✔ Simple operation and low maintenance costs ✔ Built for demanding road construction and repair environments Kjdpjx U Ah Tjfx Ai Rodr Ideal Applications • Road construction and rehabilitation • Asphalt paving for highways and municipal roads • Parking lot construction and resurfacing • Driveway paving projects • Industrial yards and factory floor paving • Street maintenance and asphalt repair • Commercial and infrastructure development projects Why Choose the TICAB MP-1100? Whether you're building new roads, resurfacing existing pavement, or completing municipal repair projects, this asphalt paver delivers professional-grade results while helping reduce operating costs and increase project profitability. The TICAB MP-1100 combines precision, durability, and operational efficiency in one versatile machine. Designed for long-term performance and reliability, the MP-1100 is a smart investment for road contractors and paving professionals who demand consistent quality and maximum return on investment. Request a Quote Today Contact us for pricing, technical specifications, customization options, and worldwide delivery. Discover how the TICAB MP-1100 can help take your paving operations to the next level.

Year of construction: 2018, condition: used, 2018 | Heatwork HW3600 | Used Small Equipment 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 38500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Kjdpfx Aiezuaprj Rsdr Engine hours 2495 - HeatWork HW3600 Ground Thawing / Hydronic Heater - 2018 Diesel and electric hydronic heater, 103 kW, Made in Norway Overview: HeatWork HW3600 (year 2018), a mobile ground-thawing and frost-prevention machine. Closed-system hydronic heater delivering fluid-borne heat up to 100 degrees C for thawing frozen ground, curing concrete, heating buildings and halls, drying and frost protection. Three independent hose circuits (630 m total) for flexible coverage of large areas. Year-round machine. Condition: Fully functional when run on AC mains power - heating, pump and controls all operate normally. When running on the built-in diesel generator, the unit may shut down unexpectedly and fail to restart; fault suspected in the control box. Sold as-is; buyer should budget for control-box diagnosis/repair to restore off-grid diesel operation. Usable now wherever mains power is available. Key specifications: Year: 2018, Engine hours: ok. 2,500 h Max heating effect: 103 kW, Fluid temp: 0-100 degrees C, Efficiency: 94 percent Pump: 3,900 l/h, Burner: single stage Fuel: winter diesel (Arctic Class 2) / biodiesel; ok. 3.5 l/h thawing 200 m2, max 9.0 l/h Diesel tank: 320 L, Run time: up to 90 h, VTV fluid: ok. 50 L Hoses: 3 x 210 m = 630 m, reinforced (max 30 bar), System pressure: 2-6 bar Electrical: 230 V / 2,600 W, Weight: 1,860 kg, Origin: Norway Capacity: Thawing 0-200 m2 (internal reel), 200-400 m2 with external reel; frost prevention up to 400 m2. Thawing ok. 48 h at 60-80 cm depth. Applications: Frozen ground/ice/snow, concrete curing, heating buildings/garages/workshops, preheating before casting, point-thawing foundations/manholes, roof thawing, drying, water heating. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41209 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: diesel, color: red, empty load weight: 1,300 kg, brakes: other, driver cabin: other, gearing type: other, suspension: other, Year of construction: 2026, Equipment: low noise, TICAB TI-CAR 225 | Compact Wheel Loader for Agriculture, Municipal & Utility Works Previous price: €27,460 Special price: €22,460 The TICAB TI-CAR 225 is a versatile compact wheel loader designed for demanding work in agriculture, municipal services, construction, landscaping, and utility maintenance. Thanks to its compact design and articulated steering system, the TI-CAR 225 operates efficiently in narrow and confined spaces such as urban streets, sidewalks, farmyards, warehouses, and industrial facilities. Combining power, maneuverability, and efficiency, it serves as a reliable alternative to traditional skid steer loaders while offering lower fuel consumption and simplified operation. Key Advantages ✔ Multi-purpose compact loader for year-round operation ✔ Compatible with a wide range of attachments: Bucket Pallet forks Kodjx Uqplepfx Ai Redr Snow blade Sweeper Auger And other hydraulic tools ✔ High maneuverability with articulated frame design ✔ Compact dimensions for operation in tight and urban environments ✔ Low fuel consumption with high operational efficiency ✔ Easy and intuitive control system for operators of all experience levels ✔ Durable construction designed for heavy-duty daily use Ideal Applications • Landscaping and green area management • Snow removal and winter road maintenance • Agriculture and farming operations • Municipal maintenance and utility services • Material handling in warehouses and industrial sites • Construction and light earthmoving works • Yard, sidewalk, and urban infrastructure maintenance Built for Productivity and Versatility The TICAB TI-CAR 225 is engineered to maximize productivity in diverse working environments. Its compatibility with multiple attachments allows one machine to perform a wide range of tasks, reducing equipment costs and increasing operational efficiency for contractors and municipal fleets. Why Choose TICAB TI-CAR 225? • Compact size with professional-grade performance • High versatility with multiple attachment options • Fuel-efficient and cost-effective operation • Strong, durable design for long-term use • Perfect solution for urban and agricultural applications Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB TI-CAR 225 is available for fast production and worldwide shipping.

Condition: new, functionality: fully functional, gearing type: other, fuel type: diesel, color: green, overall weight: 650 kg, empty load weight: 600 kg, emission class: none, mast type: other, brakes: other, suspension: other, Year of construction: 2026, Equipment: low noise, TICAB BS-1000 / BS-1000SP Bitumen Emulsion Sprayer | 1000 L Professional Asphalt Spraying Machine Kodpfjx Uqq Nsx Ai Rsdr The TICAB BS-1000 and BS-1000SP Bitumen Emulsion Sprayers are high-performance professional machines designed for efficient asphalt spraying in road construction, maintenance, and repair operations. This versatile 1000-liter sprayer is ideal for contractors, municipalities, and paving companies that require a compact yet powerful solution for everyday road maintenance and asphalt application tasks. Built for precision, reliability, and productivity, they ensure uniform application of bitumen emulsion for durable and long-lasting pavement results. Key Advantages ✔ 1000 L tank capacity for productive and continuous field operation ✔ Two configuration options: BS-1000 – trailer-mounted for easy transport and flexible deployment BS-1000SP – optional self-propelled version for maximum mobility and efficiency ✔ High-precision spray system ensures even and controlled bitumen/emulsion distribution ✔ Designed for tack coat, asphalt bonding, crack sealing, and pothole repair ✔ Compact and maneuverable design suitable for urban and confined job sites ✔ Easy operation with low maintenance requirements ✔ Durable construction for long-term professional use Applications • Pothole repair and asphalt patching • Crack sealing and joint treatment • Tack coat and bonding layer application • Road construction and resurfacing • Municipal road maintenance programs • Parking lots, driveways, and industrial areas • Highway and urban infrastructure projects Built for Professionals Its precise application technology improves surface adhesion, reduces material waste, and enhances overall pavement durability. The TICAB BS-1000 series is widely used by road maintenance contractors and municipal services looking for reliable and efficient asphalt spraying equipment. Why Choose TICAB BS-1000 / BS-1000SP? • Proven European engineering quality • Flexible trailer-mounted or self-propelled configuration • High efficiency with reduced operational costs • Reliable performance in demanding jobsite conditions • Ideal for small to medium-scale road maintenance projects Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB BS-1000 series is available for fast production and worldwide delivery.

Condition: new, Year of construction: 2026, Hot Air Lance HL-1 is a high-quality and efficient equipment. Hot Air Lance for pavement crack sealing preparation is a self-contained mobile unit for cleaning and drying of cracks, joints, potholes and chips in asphalted and concrete road surfaces, before pouring them with bitumen or bitumen polymeric materials. Powerful hot air flow removes moisture and particles of debris, grass, soil, dust, dirt, small stones, etc. leaving cracks dry, clean and ready to be filled with bitumen materials. Reasons to Buy Hot Air Lance from TICAB • Low price because of no mediators. • Always in stock. • 1-year warranty. • Full support from the manufacturer. Technical specifications: - Propane gas (consumption 5 kg / h); - Gas working pressure: 0.2-0.3 bar; - Gas bottle capacity - 50 l; - Compressor unit weight - 107 kg; - Output air temperature: not less than 400 ° C; - Hot Air Lance weight - 6 kg - Hot Air Lance length: 1500 mm; - Wheeled stand weight: 4kg; - Compressor capacity - 600 l / min; - Engine power: 7 hp. Kdedpfx Aievpqp Ao Rjr

Condition: not inspected (used), functionality: unexamined, Hartridge Diesel Injector Service Equipment – Injectomatic One + Injector Reconditioning Machine Manufacturer: Leslie Hartridge Ltd Country of Manufacture: England Machines Included 1. Hartridge Injectomatic One – Nozzle Reseating Machine 2. Hartridge Diesel Injector Nozzle Reconditioning / Grinding Machine _____ Description Complete diesel injector service equipment setup manufactured by Hartridge, a globally respected manufacturer of diesel fuel injection testing and service equipment. This package includes the Hartridge Injectomatic One nozzle reseating machine along with a Hartridge injector nozzle reconditioning / grinding machine, used for restoring and servicing diesel injectors. Kdedjyx Sg Hjpfx Ai Rer These machines were widely used in professional diesel workshops for injector maintenance and refurbishment. _____ Hartridge Injectomatic One • Diesel injector nozzle reseating machine • Used to restore worn injector sealing surfaces • Precision alignment and controlled reseating process • Timer control and emergency stop • Industrial workshop equipment _____ Hartridge Injector Reconditioning Machine • Precision injector nozzle grinding / lapping machine • Used for injector repair and refurbishment • Heavy-duty Hartridge engineering • Includes fixtures and tooling shown in photos • Ideal for diesel injector service workshops _____ Applications • Diesel fuel injection service centers • Agricultural machinery repair workshops • Truck and heavy equipment maintenance • Diesel engine specialists • Technical training facilities

Condition: used, Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, The last service by Asco was performed in December 2016 at 12,032 operating hours. Since then, the machine has only run for an additional 603 hours due to an investment in a brand new production line. The machine’s total operating time is 12,635 hours (12,032 h at last service + 603 h extra use). • The machine comes with complete documentation, including technical manuals and service reports. • Both the pump and the cylinder have been replaced. ASCO’s automatic dry ice machine produces slices of varying thicknesses and two pellet sizes (3mm and 16mm) at the push of a button. The dies for the different sizes are integrated and selectable via the touchscreen—manual changeover is not required. Theoretical output is up to 400 kg/h, depending on the type of product (block thickness or pellet size). According to the owner, the machine consistently produces at least 250 to 300 kg/h in practical use. New price: €160,000. Worldwide shipping available. Kdedpfxjy R I Uqo Ai Rer Relevant keywords for search and sale: Cold Jet dry ice machine for sale, dry ice blaster for sale, industrial dry ice cleaning machine, CO2 cleaning equipment, Cold Jet Aero series, used Cold Jet, second-hand dry ice blasting machine, dry ice pelletizer, cryogenic cleaning, high-pressure dry ice blaster, refurbished dry ice blaster, 20 ft blasting hose, dry ice gun, venturi nozzle, Kärcher Ice Blaster, ASCO Jet, Cryoblaster, ICS, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion, ICEsonic, industrial cleaning equipment Europe, dry ice machine export, DrDryice. Contact for more details or to arrange an inspection.

Condition: new, functionality: fully functional, color: red, axle configuration: 1 axle, brakes: other, driver cabin: other, gearing type: other, emission class: none, suspension: other, Year of construction: 2026, Equipment: hydraulics, low noise, TICAB RBU-2000 | Universal Hydraulic Road Brush Attachment for Professional Cleaning & Surface Preparation The TICAB RBU-2000 is a high-performance universal hydraulic road brush attachment designed for efficient street cleaning, surface preparation, and debris removal in municipal, industrial, and construction environments. Kodpfx Aiox U Dirs Rjdr Engineered for durability and productivity, it ensures fast and thorough cleaning of asphalt, concrete, and paved surfaces. This versatile attachment is suitable for a wide range of carrier machines, making it an ideal solution for contractors and municipal services looking to expand the functionality of their existing equipment. Key Advantages ✔ Hydraulic drive system for powerful and stable operation ✔ 2000 mm working width for high productivity and fast cleaning coverage ✔ 550 mm heavy-duty rotating brush for effective debris removal ✔ 100 L integrated water tank for dust suppression during operation ✔ Can be used with or without a debris collection hopper ✔ Compatible with loaders, tractors, forklifts, telescopic handlers, and backhoe loaders ✔ Quick mounting system for fast attachment and removal ✔ Durable construction designed for intensive daily use Applications • Street and road cleaning • Asphalt and concrete surface preparation • Construction site cleanup • Industrial yard and warehouse maintenance • Parking lot and airport apron cleaning • Municipal infrastructure maintenance • Sidewalk and pedestrian zone cleaning Built for Professional Use The TICAB RBU-2000 is engineered to deliver reliable performance in demanding working conditions. Its hydraulic system ensures consistent brush performance, while the integrated water tank reduces dust emissions, improving visibility and working safety. Why Choose TICAB RBU-2000? • High cleaning efficiency with wide working width • Flexible use across multiple machine types • Reduced dust with integrated water spraying system • Strong and durable industrial-grade design • Ideal for municipal, industrial, and construction applications Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB RBU-2000 is available for fast production and worldwide shipping.

Condition: new, Year of construction: 2026, TITAN DOUBLE Trade Industrial Company AB is a Polish manufacturer of modern professional equipment trusted by professionals in over 55 countries worldwide. Industrial printer TITAN DOUBLE is designed for inkjet large format contactless full-color CMYK printing. OUR ADVANTAGES = YOUR BENEFITS: TITAN DOUBLE The new printing machine from TICAB PRINT has two print heads. Now, you can print in a single pass on large items. Your benefits: • Enhanced workflows. • Wider range or samples to print on. • More comfort during printing. We are official partners of the Hewlett Packard Company. You can get the TITAN DOUBLE printing machines at the manufacturer’s price. Online education and full technical support is provided. KEY FEATURES of TITAN DOUBLE: 1) Average printing speed is 50 units per minute. 2) The opportunity to print from 1 copy without increased cost per piece. 3) No preparations or cliches are needed. 4) Low cost per copy is from 0.01 euro/unit (you will see an accurate amount on the monitor during printing). 5) Printing on different materials: paper, carton (assembled and disassembled boxes), textile, wood, and plywood. 6) Branded software from TICAB PRINT (included in the printer's price). 7) Printer's components and accessories of our own design and production. TITAN DOUBLE is an innovative printing system. It allows you to feed huge items beneath the printer head. Printer heads can be adjusted up to 10 cm above the conveyor belt. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches. and water after the image dries. Technical Characteristics of the Printer head: Print area width - up to 59.4cm (23.4 in) Print area length - from 2.54 cm (1 inch) to 91.44 cm (36 inch) Workpiece movement speed - up to 45.72 cm (18 in) per second Printing speed - up to 50 arc\ min A4, up to 16 arc\ min A3 Print resolution - 1200x1200dpi Colors - CMYK (Cyan, Magenta, Yellow, Black) Ink type - water-based pigment ink Information connection - Ethernet 10/100/1000 Base-T network port Operating system - Windows (recommended Windows10) Hewlett Packard HP driver TICAB software: The current status of the printer is being monitored. Ksdpfx Aovt Uvzoi Rodr Number of prints is calculated - the total and the current task. The calculation of the value of ink consumption. Monitoring the current level of ink in the cartridges. Starting the printer nozzle maintenance and cleaning functions. Starting the procedures for replacing the cleaning mechanism. Calibrate the printer nozzles for linearity and color uniformity. Start the procedure for high-speed printing of a large number of copies.

Condition: new, functionality: fully functional, fuel type: electric, color: red, operation weight: 385 kg, fuel: electricity, driver cabin: other, gearing type: other, emission class: none, suspension: other, Year of construction: 2026, Equipment: all wheel drive, low noise, TICAB Electric Street Cleaner CITY ANT – Municipal & Urban Cleaning Machine The TICAB CITY ANT is a battery-powered electric street vacuum cleaner and street sweeper for urban cleaning, sidewalk and road maintenance, park and plaza cleaning, airport and industrial surface debris removal. Equipped with a 240 L waste container, 2.5 m suction hose, and powerful hydraulic vacuum system, it removes leaves, gravel, sand, litter, bottles, and cans efficiently. Compact, self-propelled, quiet (~64 dB), and emission-free, it is perfect for municipal services, contractors, cleaning companies, and facility managers. Kdsdpfex Uxiaex Ai Ror It better works together with our Self-propelled Trolley CITY BEETLE. Built for municipal services, facility maintenance, cleaning companies, and construction sites, this battery-powered street sweeper delivers reliable debris collection and outstanding maneuverability without power requirements. The TICAB CITY BEETLE is a professional street orderly barrow designed for efficient cleaning of streets, sidewalks, plazas, parks, courtyards, walkways, parking lots, and urban areas. Key Features • Mobility: Speed up to 6 km/h for fast cleaning of large areas • Eco-friendliness: Electric trolly for urban maintenance is safe for people and the environment • Multi-functionality: Electric street orderly barrow collects and sorts waste, washes away dirt with water • Cost-efficiency: Street cleaning trolley features low energy consumption and minimal maintenance • Safe operation: Street cleaning barrow comes with electromagnetic brakes, optimal tire pressure, IP54 protection Applications • Street and sidewalk cleaning • Parking lot, promenade, park, and plaza maintenance • Industrial yard and facility surface cleaning • Municipal cleaning and public works • Pre event or post event surface clearing Why Choose TICAB CITY BEETLE The TICAB CITY BEETLE offers simple, reliable, and cost effective sweeping with high debris capacity and robust build quality, making it ideal for cleaning professionals, municipalities, facility operators, and maintenance crews who need an efficient, quiet, and low cost sweeping solution. Contact us now for price, delivery options, and full technical details. Make street cleaning easier with TICAB!

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ Kdedpfx Aijzvckno Rer During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: new, Year of construction: 2026, functionality: fully functional, Ticab Printing System TPS is an innovative cantilever equipment. It allows feeding huge items beneath the print head. The print head can be adjusted up to 30 cm above the conveyor belt to feed folded cardboard boxes or other huge items. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches and water after the image dries. Call us to get a beneficial commercial offer. Specifications:  Print area width: up to 29.7cm (11.7 in)  Print area length: from 2.54 cm (1 inch) to 91.44 cm (36 inch)  Workpiece movement speed: up to 45.72 cm (18 in) per second  Printing speed: up to 50--70 copies\min A4, up to 16 copies\min A3  Print resolution: 1200x1200dpi  Number of inkjet nozzles: 59136 (14 printing zones of 4224 nozzles each)  Colors: CMYK (Cyan, Magenta, Yellow, Black)  Ink type: water-based pigment ink  Information connection: Ethernet 10/100/1000 Base-T network port  Operating system: Windows (recommended Windows10)  Hewlett Packard HP driver Kedpfju Ibhwox Ai Rsdr  Trusted by professionals in 55 countries worldwide!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Label dispensing module for print integration, print module 4L300 thermal transfer printer, belt conveyor, see photos for details. Kjdpfx Aiezn N Nno Redr

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Kdjdpfx Aijzizkyj Rer Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Kdsdpjzimbkofx Ai Ror Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: used, mileage: 80,000 km, power: 110 kW (149.56 HP), first registration: 06/2018, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 10/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,304 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,820 mm, loading space height: 1,340 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Beautiful and well-maintained VW T6 L2 long wheelbase panel van with high-quality equipment, ideal for trades and businesses. ALUCA workshop/shelving system and electrical installations (details below). Trailer hitch with a 2.5 t towing capacity GVWR 3.20 t (including reinforced 17" steel rims) Auxiliary heater / additional heater, air, switchable between cab and cargo area Climatic air conditioning with pollen filter Driver assistance systems: - PDC Park Distance Control front and rear, optical and acoustic display - Hill start assist - Driver fatigue detection - Trailer stabilization - Brake assist (HBA) - Multi-collision brake - ABS, ASR, ESP Leather multifunction steering wheel Composition Media audio system (radio/CD player, MP3 playback function) - Radio, CD player - USB, SD card, Bluetooth audio - Hands-free system for mobile phone with Bluetooth - App-Connect (Android Auto and Apple CarPlay) pre-installed, can be activated - Voice control Multifunction display Plus / onboard computer Driver and passenger airbags Electrical package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control Spare wheel and jack Fog lights 2x mounts for rotating beacon lights 2nd battery with separation relay Kedpfx Aiezvy Nhj Redr Wheelbase 3400 mm Sliding door to the cargo area with tinted glass Rear door with tinted glass, heated, with wiper system Commercial vehicle registration N1 / Van Suspension 17", 17" tires Engine 2.0 L - 110 kW TDI 6-speed manual transmission Adjustable driver's seat: seat height, backrest, lumbar support Adjustable passenger seat: backrest Seat covering fabric Simora Adjustable steering wheel Non-smoker package Heat-insulating glass Heated windshield washer nozzles Cargo area equipment: Aluca workshop system (similar to Bott, Sortimo, Würth). Left side: shelving system with long storage compartment, storage compartments and 8 drawers. Right side: small workbench and shelving system with storage compartments and 3 drawers. Cargo area partition with window, upholstered in the cab (noise reduction). Robust wooden floor. Load securing through eyelets and fastening rails. Upholstered ceiling. Ventilation and exhaust. LED lighting. Electrical installations: External 230V socket (input). 230V / 1600W voltage converter with charger for 2nd battery. 2x 230V sockets (driver's cab and cargo area, rear). Cargo area dimensions: - Length bottom: approx. 282 cm - Length middle: approx. 271 cm - Length top: approx. 261 cm - Height: 134 cm Service history (from leasing documents): 06.2020 / 27,158 Longlife service 06.2021 / 37,594 Longlife service + service 1 06.2022 / 49,870 Longlife service 07.2023 / 61,178 Longlife service + service 1 07.2024 / 73,173 Longlife service 10.2025 / 78,563 Longlife service + service 1 Mounted tires: Winter tires 215/60 R 17 on steel rims with approx. 4 mm tread depth in the front and approx. 7 mm in the rear Additional tires: Summer tires 215/60 R 17 on steel rims with approx. 5/5/7/7 mm tread depth Despite careful processing, input and data transmission errors may occur in the vehicle description including images. Errors and prior sale are reserved. The vehicle can be inspected by Dekra or TÜV if desired.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,713 h, machine/vehicle number: 007, laser power: 4,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been serviced annually (most recently in December 2025); service records are available. The Laser Turbo-Blower was replaced in 2021. The X-axis and Y-axis were renewed in 2023 after 27,066 operating hours. TECHNICAL DETAILS Travel range X-axis: 2,520 mm Travel range Y-axis: 1,550 mm Travel range Z-axis: 300 mm Travel range B-axis: 17 mm Cutting capacity, normal steel: max. 12 mm Cutting capacity, stainless steel: max. 10 mm Cutting capacity, aluminum: max. 8 mm Laser power: 4 kW Wavelength: 10.6 µm Laser beam diameter at the outlet of the laser resonator: 27 mm Cutting speed X-axis: 0 to 20 m/min Cutting speed Y-axis: 0 to 20 m/min Travel speed X-axis: max. 80 m/min Travel speed Y-axis: max. 80 m/min Travel speed Z-axis: max. 60 m/min Kdedpfx Aozrnhwsi Rjr Workpiece weight: max. 330 kg Material size: max. 1,500 × 5,000 mm Table height: 820 mm MACHINE DETAILS Control system: AMNC-F (FS-160I LPB) Minimum measuring unit: 0.001 mm Memory capacity: 10 MB Dimensions & Weight Machine dimensions (L × W × H): 5,745 × 2,630 × 2,151 mm Net weight: 7,700 kg Operating hours (according to counter) Operating hours: 34,401 h Runtime: 21,713 h Cutting time: 11,111 h EQUIPMENT Loading and unloading system Filtration system Manuals The seller can offer dismantling and loading of the machine for an additional fee. Within Germany, the seller can also offer an installation service at the new location.

Condition: new, functionality: fully functional, Year of construction: 2026, TI-CAR universal loader 225 The Polish company TICAB offers its own equipment for patching and road maintenance. OUR ADVANTAGES: - we are a manufacturer, - our equipment operates in 57 countries around the world - availability of finished products in stock, - fast execution of individual orders, - production capacity of 50 units per month, - own engineering and design bureau - 12 engineers - 15 years of experience in mechanical engineering, we have been working since 2009 We offer the TI-CAR 125/225 forklift model as a universal working machine. The stable boom allows you to easily and safely lift loads with pallet forks. The adjustable steering wheel and comfortable seat suspension reduce fatigue from travelling. The dual-pedal steering system allows you to control the movement with amazing precision, even with demanding attachments and difficult terrain. The TI-CAR is an effective tool for a variety of jobs in construction, agriculture, municipal services, with alternating loading into the body, snow removal, soil moving, transporting cargo, levelling the surface. Technical characteristics: Engine - Kubota (Japan), model - 1105; cylinders - 3, or Yanmar (Japan), model 3TNM72 Kodpfx Aisvprpke Rsdr Engine power - 18 kW/25 k/s, Cylinder capacity (cm³): 784-1120 Cooling system - liquid; Hydraulics - HANSA (Italy), Battery (V-Ah): 12-65 Generator (A): 40 Maximum torque (Nm): 72-77,6 Operating speed of the engine, rpm - 3000 The maximum engine speed without load is 3600 rpm; Maximum lifting capacity to a height of 50 cm, kg-800-90 Tipping load with a straight frame, kg-480-780 Tipping load with a bent frame, kg-350-500 Boom lifting time, sec-2.8 Boom lowering time, sec-2.1 Loader weight, kg 1000-2550 Maximum lifting height, mm -2100-2860 Boom self-levelling - for model 225 Operating volumes: Cooling system, (l): 3,1 Engine oil, (l): 5,11 Fuel type - diesel (fuel tank - 18 l) Hydraulic tank (l): 44 Total capacity of the hydraulic system (l): 48. Driving characteristics: Travel speed (km/h)-0-13, Breaking angle-56°, Turning radius in place-1.63 m Boom lift with tipping bucket 210 cm. Wheelbase: Outer wheel diameter (inch) - 23’ Inner diameter of the disc (inch) - 12’ Tyre width (inch) - 8.5’ The cost of the forklift* is as follows Ti-Car 125 - 20450 € with PDS Ti-Car 225 - 22450 € including VAT *All prices are calculated in UAH at the NBU exchange rate on the day of signing the contract Attachments: - Cylindrical sweeper -4800 €. - Brush with a garbage hopper with self-unloading function - 5500 € - Bucket for transporting cargo - 650 €; - Fork for stacking - 650 €; - Blade for snow removal - 1200 €; - Silo fork - 1300 €. - Jaw bucket -670 €. ATTENTION!!!! The standard price for the equipment is 27,460 EURO, but we are currently offering a discount of 5,000 EURO!!!!!

Condition: used, mileage: 120,000 km, power: 120 kW (163.15 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2026, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,267 mm, total width: 2,020 mm, total height: 2,332 mm, loading space length: 2,630 mm, loading space height: 1,620 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Beautiful and well-maintained Mercedes-Benz Sprinter (907) compact van, 2.1 L - 120 kW CDI CAT engine, with good equipment, ideal for trades and businesses. Permissible total weight 3.5 t Tow hitch preparation (electrical wiring present and connector with connecting cable included) Air conditioning with pollen filter Comfort suspension seat on the driver's side with a fold-out armrest, four-way adjustable: Driver's weight, seat height, seat tilt, backrest 3 seats (double passenger seat) Driver assistance systems: - Rear view camera (very good image) - Driver fatigue detection - Hill start assist - Brake assist (HBA) - ABS, ASR, ESP - Automatic headlight control - Automatic windshield wiper control MBUX infotainment system with touchscreen - Navigation with TMC Kodszl H T Ejpfx Ai Rjdr - AppConnect with Android Auto and Apple CarPlay - DAB/FM radio - USB-C media, music streaming via Bluetooth - Mobile phone preparation with Bluetooth and hands-free system - Mercedes-Benz emergency call system - Voice control for radio system, navigation, phone Multi-function steering wheel On-board computer/multi-function display Assyst service interval display Comfort: - Electric windows - Electrically adjustable exterior mirrors - Central locking with remote control - Keyless start system Headlight unit with daytime running lights Fog lights 6-speed manual transmission Wheelbase 3250 mm Rear wing doors without glazing, opening angle 180 degrees Sliding door, cargo area, right side High cargo area partition without windows Storage compartments in the headliner Seat cover, fabric Steering wheel/steering column adjustable Heat-protective glazing Jack Vehicle has a speed limiter set to 130 km/h Cargo area equipment: Cargo area partition (steel) without windows. Robust, plastic-coated wooden floor (manufacturer Würth). Load securing system with special fastening rails (on the side walls, in the floor and on the ceiling) and eyelets. LED interior lighting. Rear step. Cargo area dimensions: Cargo area length, bottom approx. 2,630 mm Cargo area length, middle/top approx. 2,530 mm (due to the angle of the partition) Cargo area height approx. 1,620 mm - 1,640 mm (measured under the crossbar) Maintenance history from leasing documents: 10.2022 / 44,474 km Inspection (major service) with engine oil change + brake fluid 10.2024 / 89,435 km Inspection (major service) with engine oil change + air filter + fuel filter + brake fluid + interior filter Mounted tires: Winter tires Conti 235/65 R 16 on steel rims with approx. 8 mm tread depth front and approx. 7 mm tread depth rear Additional set of wheels in the cargo area: Summer tires Continental 235/65 R 16 on steel rims with approx. 4 mm tread depth. Despite careful processing, input and data transmission errors may occur in the vehicle description, including images. Errors and prior sale are reserved.

Condition: good (used), Year of construction: 2014, 2x carton packaging machines, carton erectors, B&E Equipment / I-Pak – used: Price per unit, ex works: only €9,950 (net), with self-dismantling! Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Each unit includes 1x Nordson ProBlue 4 hot melt adhesive applicator with 4-liter hot melt adhesive Weight: approx. 1,500 kg 400V, 8kW, 15A, 3 phases Condition: good Kdjdpfx Aiezbyn Ne Ror Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: used, Year of construction: 2018, machine/vehicle number: SCIAC44, Used Rinsing Machine Aesse Service LINE6 year 2018 This machine therefore provides a reliable and robust option for industrial bottling plants. A Esse Service manufactured this model in 2018 to ensure high performance with optimal energy efficiency while maintaining the quality of rinsing processes. Although previously used, the machine has seen very limited operation, which has preserved it in excellent condition. Now in storage, the LINE6 model is designed to handle glass containers with a standard 0.75 L format and operates at a speed of 900 bottles per hour (BPH). Technical Specifications of the Rinsing Machine Aesse Service The Used Rinsing Machine Aesse Service LINE6 year 2018 delivers stable production with a power consumption of 2 kW. In addition, a high voltage (A.T.) of 400 V alternating current ±10% with neutral and ground powers the machine, while a low voltage (B.T.) of 24 V direct current ±10% supplies control circuits. Therefore, the machine supports an operating frequency from 50 to 60 Hz, which adapts well to different industrial standards. Pneumatic System The Machine requires a pneumatic supply of 6 bar and consumes 500 liters per minute to operate effectively. Moreover, this stable airflow supports precise rinsing cycles, which is crucial in bottling lines where flow regularity directly impacts product quality. Furthermore, the airflow consistency ensures reliable performance over time. Dimensions and Weight The compact design of the Used Rinsing Machine Aesse Service LINE6 year 2018 enables easy integration into work environments with limited space. For this reason, the machine measures 1300 x 1300 x 1600 mm (L x W x H), with a dry weight—meaning without liquids or filled conduits—between 300 and 500 kg. Consequently, the moderate weight allows for easy transport and installation, making the LINE6 model practical and versatile for various industrial applications. Container Capacity The Used Rinsing Machine Aesse Service LINE6 year 2018 handles bottles with capacities ranging from a minimum of 0.5 liters to a maximum of 1.5 liters, thereby providing versatile production capabilities. This range, in particular, accommodates rinsing needs for various standard formats used in the beverage industry. Bottle Diameter and Height Kedpfxsvhcplo Ai Redr Additionally, the machine accepts bottles with diameters from 55 mm to 115 mm. Consequently, this flexibility enables it to handle different types of glass containers securely during the rinsing cycle. Also, the machine supports bottle heights between 160 mm and 345 mm, which benefits companies by allowing them to use different formats without frequently changing equipment. Performance and Reliability The rinser provides long-lasting performance thanks to its robust construction and advanced engineering. Moreover, its design reduces routine maintenance, thus ensuring operational continuity essential for industrial bottling lines. Given that this machine has seen minimal prior usage, it adds to its reliability. With a speed of 900 BPH, the LINE6 model certainly meets the needs of high-production plants. Conclusion of the Rinsing Machine Aesse Service In conclusion, the Used Rinsing Machine Aesse Service LINE6 year 2018 offers an efficient and versatile solution for handling glass bottles of various sizes and capacities. Its compact design and high-quality construction, for in...

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Our 400 Ton/Hour Capacity Stationary Crushing and Screening Plant consists of 40 m³ vibrating feed bunker, wobbler feeder, CLK-110 jaw crusher, impact crusher, tunnel systems, stock and return belts, stock bunkers, control cabinet and automation system. The products transferred to the feed bunker are separated from dirt and mud in the first stage of the double-stage wobbler feeder and bypassed by the bypass belt conveyor In the second stage of the wobbler feeder, the products that are suitable for the jaw crusher are sent to the stock area with the transfer belt. The jaw crusher, with a maximum feed of 800 mm, crushes the products and sends them to the fist vibrating screen. In the first vibrating screen, the products are separated in 0-40 mm, 40-90 mm sizes and sent to the stock area. Products above 90 mm size are transferred to the secondary crushing and screening unıt. The products transferred to the tunnel system are sent to the 12-13 S impact crusher. The products crushed in the impact crusher are separated in different sizes by vibrating screen and sent to the stock area. The products stored in the stock area are transferred to the pan feeder by passing through the tunnel system according to the need. Kdsdpezvxlnofx Ai Ror The vibrating pan feeder transfers the products to the stock bunkers with the transfer belt conveyor All equipment of the crushing &screening plant is controlled from 3 different automation panels.