Used Trademak Srl Squalo 522 for sale (2,889)

Year of construction: 2022, condition: new, machine/vehicle number: XXXX, Baffle spray scrubbers are a technology for air pollution control. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas stream to atomize some liquid as it passes over them. Nledjh Akn Uopfx Agrsg

Condition: good (used), functionality: fully functional, mileage: 69,200 km, fuel type: diesel, maximum load weight: 200 kg, Year of construction: 2005, operating hours: 5,150 h, TRUCK MOUNTED PLATFORMS Isoli PNT 205 Year 2005 Working height 20,5 m Horizontal outreach 9 m Basket capacity 200 kg Hours 5150 km 69.200 Excellent conditions Nledszg U Igjpfx Agrog Complete of all documents Inspected and refurbished by service provider

Condition: used, functionality: fully functional, Year of construction: 1990, operating hours: 3,151 h, MAN 33 362 DF with Cifa PA1006 35m concrete pump First registered in 1990 - Euro 3 compliant Mileage: 130,000 km (to be verified) Cifa PA1006 35m equipment – pump replaced in 2005 Operating hours: 3151 Tires: 60-70% remaining Good condition Nljdpfx Agsz Ep Sujrog Available immediately WE WILL CONSIDER TRADES OF VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: used, Year 1989 Center height on the bed: 225 - 250 mm Distance between centers: 1500 mm Maximum turning diameter in the gap: 660 - 710 mm Maximum turning diameter on the bed: 455 - 505 mm Maximum turning diameter on the carriage: 270 - 290 mm Fixed steady rest bore diameter: 200 mm Traveling steady rest bore diameter: 130 mm Bed width: 330 mm Gap width: 250 mm Gap width at the carriage: 160 mm Maximum spindle diameter: 140 mm Spindle bore: 105 mm Reduction sleeve for spindle / Morse taper: No. 5 Tailstock Morse taper: No. 5 Speeds and Feeds • Spindle speeds: No. 16 • Speed values: from 23 to 1000 rpm (or 35 to 1500 rpm). • Longitudinal feeds: 0.06 - 0.84 mm/rev. • Transverse feeds: 0.03 - 0.42 mm/rev. Threads • Metric pitches: 0.5 - 28 mm. • Module pitches: 0.25 - 14. • Whitworth: 2 - 112 threads/inch. Motor • Standard power: 7.5 HP. Nedpfxez Dwl Te Agrelg Machine comes with operating and maintenance manual. All technical data provided is indicative and may be subject to change without prior notice; therefore, it should not be considered binding.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, BONFIGLIOLI SQUALO 950 WITH NEW ENGINE! Nlsdpfx Aoyg Hhtsgrsg

Condition: used, functionality: fully functional, Year of construction: 1996, VOLVO TRUCK FL12 420 WITH THREE-WAY TIPPER BODY First registered: December 30, 1996 – Euro 2 Mileage: 431,770 km 3 axles Three-way tipping body Tires: 40–50% tread remaining Nsdpfx Aez Ep Rdsgrjlg Valid inspection certificate Good condition Available immediately WE ARE INTERESTED IN TRADING VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, AND SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Year of construction: 2022, condition: new, The Venturi Scrubber is a device that generally consists of a centrifugal part capable of separating the solid parts from the liquids and of a Venturi column that narrows in the middle section to vary the pressure and therefore allow the polluting solid particles to fall through the fumes. This type of Scrubber is used for the removal of dust and pollution present in corrosive and dangerous industrial gases. Venturi Scrubbers are used in the abatement of particulates that come from coal, oil or wood boilers, the textile industry but also for emissions from the chemical industries, wood industries, paper mills, etc. Nledpfjh Atp Aox Agrsg

Year of construction: 2022, condition: new, Kairos Engineering's energy recovery system is a technology that recovers the heat contained in the industrial hot wastewater, to transfer it to other water to be put back into the production process. The transfer takes place by means of shell and tube heat exchangers in which the two fluids, which never meet directly in order not to undergo contamination, they are sent against the current, that is, one against the other. Indicative savings of 30%. Njdpfx Ageh Akv Hsrelg

Condition: excellent (used), Year of construction: 2018, operating hours: 3,000 h, The Agfa Jeti Tauro H2500 LED is a 2.54 m hybrid flatbed/roll-to-roll UV LED inkjet printer. Colour configuration: CMYK Lc Lm + White + primer (6c W4 P2). Under Premium care service contract. Perfect working conditions. Only 2.900 hours of print. Nledpfxjz D I R To Agreg Full automation - Double robot configuration The high-performance UV LED printer for demanding large-format production. 2.54 m print width Up to 275 m²/h UV LED technology Hybrid flatbed + roll-to-roll Up to 1,200 dpi CMYK + Light Cyan + Light Magenta Optional White & Primer Print on rigid and flexible media Designed for high-volume, industrial production One machine. Endless possibilities. From signage and displays to POS, retail graphics, décor and banners, the Jeti Tauro H2500 LED delivers high-quality results with exceptional productivity. For further technical specifications please refer to attached brochure.

Condition: excellent (used), Year of construction: 2018, operating hours: 1,700 h, functionality: fully functional, travel distance X-axis: 3,370 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, feed length X-axis: 90,000 mm, feed length Y-axis: 60,000 mm, feed length Z-axis: 40,000 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: Osai, controller model: Open, spindle speed (max.): 24,000 rpm, spindle motor power: 8,500 W, number of spindles: 1, number of slots in tool magazine: 12, type of input current: three-phase, Equipment: documentation/manual, ATHENA 3015, a 5-axis machining center for the processing of composite and plastic materials. Nlsdpsz Dtx Asfx Agrjg

Condition: excellent (used), Year of construction: 2013, The EFI VUTEk GS3250 is a 3.2-meter, high-production UV hybrid flatbed/roll-to-roll printer. It is engineered to seamlessly bridge the gap between high-margin, photo-realistic point-of-purchase (POP) graphics and heavy-duty, fast-turnaround commercial print runs Nsdpfx Agez Dh N Ajrjlg Eight colours + White Western Europe Installation possible upon reqiest In production, demo possible Official documentation outlines the comprehensive technical specifications and facility requirements for the VUTEk GS3250 system are enclosed

Year of construction: 2012, condition: reconditioned (used), functionality: fully functional, CALENDER SUITABLE FOR CONTINUOUS FABRICS: • Transfer printing. • Reactivation of direct inks. • Heat setting. • HEATED CYLINDER DIAMETER: 200 mm • HEATED CYLINDER WIDTH: 2000 mm • Working width: 1,850 mm • Total width: 3300 mm Nsdpfxjz Dh Tbo Agrjlg • Total length: 2300 mm • Total height: 2100 mm

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 142 h, Tracked asphalt paver Bitelli CAT BB 651 C Nedpfx Agjz Eqbkjrolg Year 1999 GVW: 14,500 kg Engine type: Deutz F5L 912 Working hours: 142 Good general condition WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY CATERPILLAR, FIAT HITACHI, KOMATSU

Year of construction: 2022, condition: new, Electrostatic filters are considered the most sophisticated technology, currently available, for the collection of solid and liquid particles existing in an exaust air flow. The electrostatic uptake allows the separation of any particle from the air, regardless of its size. In fact, the agglomeration of very fine particles is possible with efficiencies up to 99% on atmospheric dust according to the EN 779 method.The use of electrostatic filters therefore allows to obtain air completely free of dust , smoke, spores, bacteria, pollen ecc . The main advantages deriving from the use of electrostatic filters are: • High filtration efficiency • Low pressure drops • Low operating cost • Limited maintenance interventions Nledpfx Ageh Aku Torsg • High operating reliability

Condition: used, Year of construction: 2022, Technical specifications for the TZ 150 – 6.4 m S-Line model Usable working length: 6400 mm Insertion depth: 1250 mm Maximum upper die opening: 220 mm Maximum bending capacity: 1.50 mm steel sheet (400 N/mm²) Bending angle / precision: max. 143° / ± 0.5° Bending speed: from 0° to 140° in 2.0 s from 140° to 0° in 1.9 s Depth gauge stroke: 5–1250 mm (5 + 1 stop unit) Depth gauge – tolerance range: ± 0.1 mm per series Electrical supply / protection: 400 V / 50 Hz, 20 A / 4.0 kW pump motor External dimensions / weight: L 7800 × W 2110 × H 1800 mm / approx. 5500 kg Nljdpfx Asz Epd Rsgrsg

Condition: used, Year of construction: 2001, Automatic tenoner 1 saw diameter 500 mm 2 plate-type spreaders 2 ball bearings with a diameter of 40 mm Pneumatic pressers Automatic carriage advancement Nlodpfoz Dfw Dex Agrsg Digital display Speed variator Total power 35 kW 400 V Weight 3500 kg Price sold as is without overhaul

Condition: used, Year of construction: 1998, Complete line Sign press oil Power 31 kW 250/130 cm Press entry and exit automation Nljdpfx Agjz Dfyfsrsg Ejector to die-head? Actually 'moulurière' refers to 'molder' or 'moulding machine'. 'Ejecteur vers moulurière par exemple' -> 'Ejector towards a moulding machine, for example' Glue applicator ORMA SC2R-300 at press entry 380 V Available immediately

Condition: like new (used), Year of construction: 2019, Hot air generator with 2 outlets and 1 flue outlet, designed for use with wood waste, suitable for heating an area of 500 square meters. Njdsz D I Ilspfx Agrolg

Condition: used, Year of construction: 2020, Technical specifications for the TZ 150 – 6.4 m S-Line model Usable working length: 6400 mm Insertion depth: 1250 mm Nedpfez Epdwjx Agrolg Maximum upper die opening: 220 mm Maximum bending capacity: 1.50 mm steel sheet (400 N/mm²) Bending angle / precision: max. 143° / ± 0.5° Bending speed: from 0° to 140° in 2.0 s from 140° to 0° in 1.9 s Depth gauge stroke: 5–1250 mm (5 + 1 stop unit) Depth gauge – tolerance range: ± 0.1 mm per series Electrical supply / protection: 400 V / 50 Hz, 20 A / 4.0 kW pump motor External dimensions / weight: L 7800 × W 2110 × H 1800 mm / approx. 5500 kg

Condition: like new (used), Year of construction: 2023, 500-litre turbo mixer for PVC with 1000-litre cooling tank Year: 2023 Nlsdpoxvrqkofx Agrog Motor: 75 kW

Condition: used, mileage: 256,704 km, Year of construction: 2016, IVECO TRAKKER AD340T45 with conveyor and Imer concrete mixer Registered 2016 - Euro 6 256,704 km 13,500 operating hours 4 axles Imer LT8XL-7HSL equipment with telescopic conveyor belt Tires: 50/60% tread Nlsdpfjz Ep Uisx Agrjg Good condition Available immediately (current location: Denmark) WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: used, functionality: fully functional, Year of construction: 2014, Vögele 1603-2 vibratory asphalt paver Year: 2014 8,000 operating hours Equipped with leveling sensors and an extendable screed, 2.5 m closed – 5 m extended Maximum operating weight: 17–18.8 tons Engine type: Perkins 1104D-E44TA Working speed: 18 m/min Electric heating Good overall condition Nlodpfez Eqamex Agrjg WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, AND EQUIPMENT FROM CIFA, SERMAC, PUTZMEISTER; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, KOMATSU.

Condition: used, functionality: fully functional, mileage: 316,475 km, first registration: 09/2007, Year of construction: 2007, operating hours: 4,813 h, DAF CF 85.480 with IMER concrete mixer First registration 04.09.2007 – Euro 4 316,475 km H 4813 4 axles IMER LT 130 ID configuration – Auxiliary engine Tyres 50/60% Valid technical inspection Good condition Immediately available Nljdpfx Agsz Ep Txjrsg WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, PUTZMEISTER; OR EARTHMOVING MACHINERY BY CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: used, Year of construction: 2008, MECOS 7-AXIS PRESS BRAKE Nedpfjz Dwkpjx Agrelg Model SYNCRO 135/3000 Year 2008 Weight kg 13,000 Dimensions mm 4820x2500 H 2850 CNC ESA FEATURES Type of press brake: Hydraulic, Synchro, 7-axis Maximum force: 135 tons Maximum distance between uprights: 450 mm Maximum stroke: 200 mm Approach speed: 200 mm/s Working speed: 0 ÷ 10 mm/s Return speed: 130 mm/s Back gauge stopping distance: 11 mm Laser safety distance – punch: 16 mm Voltage: 400 V Electrical power supply: 50 Hz Phases: 3 Motor power: 15 kW Tank capacity: 200 liters Maximum pressure in hydraulic circuit: 310 bar Length of lifting cables: 2 m Noise level at operator station: 64 dB(A) Machine complete with operating manual and a copy of the CE declaration of conformity. All technical data provided are indicative and may be subject to change without prior notice; therefore, they should not be considered binding.

Condition: used, functionality: fully functional, mileage: 411,800 km, first registration: 09/2011, Year of construction: 2011, IVECO TRAKKER 450 with CIFA concrete mixer First registered: September 21, 2011 – Euro 5 Mileage: 411,800 km Nlsdpfxez Ep T Ee Agrjg Axles: 4 Equipment: CIFA RY1300 – Power Take-Off (PTO) Tires: 60/70% tread Valid inspection certificate Good condition Available immediately WE CONSIDER TRADES OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, KOMATSU.