Used Trumpf Evo-W for sale (28,986)

Condition: like new (used), Year of construction: 2017, operating hours: 5,159 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer + model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2G / Zone 1 Mast: 2F3140 ID: 25063.3443 Category: Used Mast: 2F Lowered height: 2120 mm Lifting height: 3140 mm Capacity: 1600 kg Year: 2017 Operating hours: 5159 hours Battery: Completely NEW * 48v/625Ah * Year 05/2026 Options: CONTAINER specifications!! * EX * Proplan !!!!! System = INERIS 08 ATEX 3022 X Nwsdpfx Akoy Itgmoueg Gas group = IIB Type = Cat 2G (approved for ZONE 1 and 2) Temperature class = T4 Equipped with: - Complete road lighting - Additional spotlights - Joystick control forward/reverse - 2D - FFL mast - New tyres (ATEX specs)

Condition: like new (used), Year of construction: 2015, operating hours: 5,608 h, load capacity: 1,600 kg, lifting height: 3,340 mm, fuel type: electric, mast type: duplex, construction height: 2,230 mm, Manufacturer + model: LINDE E 16 - 386 / 02 evo * EX * Proplan 2G / Zone 1 Mast: 2F3340 ID: 24122.5302 Category: Used Mast: 2F Lowered height: 2230 mm Lifting height: 3340 mm Capacity: 1600 kg Year: 2015 Operating hours: 5608 hours Battery: Completely NEW * 48v / 500ah * Year 05/2026 Nsdpfx Aksy Itb Rouswg Options: EX * Proplan !!!!! System = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (approved for ZONE 1 and 2) Temp class = T4 Equipped with: - LINDE steering - Duo pedal! - 2D - FFL mast - New tyres (ATEX specs)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 17,513 h, load capacity: 4,000 kg, lifting height: 5,365 mm, load center: 500 mm, fuel type: gas, mast type: triplex, construction height: 2,650 mm, motor manufacturer: VW, Equipment: cabin, clamp, lighting, sideshift, Triplex mast with full free lift, build height: 2,650 mm, lift height: 5,365 mm, fork positioner with sideshift, maximum opening: 1,750 mm, fork length: 2,450 mm, road lighting according to StVO, LED work lights front and rear, fully enclosed cab with heater, air conditioning, VW turbo diesel engine, manual transmission with single-pedal control, 6x pneumatic tires, operator's manual included. Technical condition at sale: Forklift has been technically overhauled! Major service recently completed! (Timing belt and water pump also replaced) UVV safety inspection recently passed without defects! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: Nodpfx Ajwab Nmekuswg By appointment at any time during business hours: Monday to Friday. Possible from 8:00 a.m. to 6:00 p.m. Saturday from 8:00 a.m. to 1:00 p.m. TRANSPORT: Low-loader or curtain-sided truck available at a reasonable price.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, cooling capacity: 60 kW (81.58 HP), type of input current: three-phase, type of cooling: air, overall weight: 666 kg, total width: 760 mm, total length: 1,865 mm, total height: 1,447 mm, noise level: 55 dB, Equipment: cooling unit, For sale is an MTA TAE EVO 161 air‑cooled industrial chiller. This unit is in excellent condition and only used in once since purchased. It was purchased for a CVD system project but barely put into service. Key Specifications: Model: MTA TAE EVO 161 Year of manufacture: 2008 Cooling capacity: 60 kW Refrigerant: R410A Nwedpfx Aeyzcy Aekujg Power supply: Suitable for UK 3‑phase (please check your local requirements) Dimensions (L×W×H): 1865 × 760 × 1447 mm Weight: approx. 666 kg Condition: Unused, stored indoors, fully intact Applications: CVD system cooling Industrial process cooling Laser chiller Semiconductor equipment cooling Laboratory / research facility cooling Why buy this unit? Brand new condition, yet priced far below current new market price Perfect for general and advanced manufacturing setup Robust MTA quality – built for 24/7 continuous operation Price: £8,900 (or nearest offer) – open to reasonable offers Collection / Shipping: Collection preferred from Bristol, UK (buyer to arrange transport) Can assist with loading – please contact to discuss Contact: Please message me via the platform for any questions or to arrange viewing / collection. Serious inquiries only. Thank you.

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional cylindrical grinding machine EMAG W 11 Evolution. The conventional external-internal face cylindrical grinding machine fits perfect for single parts, prototypes and small batches. The basis of the EMAG W 11 Evolution machines is the established KARSTENS cylindrical grinder concept. No hydraulics, axis drives with servo motors and screw spindle drive, technology entry of the grinding parameters via touchscreen, automatic dressing with compensation, automatic axis release. TECHNICAL DATA Nwedpfxetmrlho Akusg Workpiece lenght: max. 1,500 mm Center height: 200 mm | Ooption 320 mm Workpiece weight: 250 kg External grinding wheel diameter: max. 500 x 80 mm Workpiece headstock: MK4 | Option MK5 / MK6 Tailstock: MK 4 Price, delivery time and equipment of the machine according to agreement.

Condition: new, Year of construction: 2025, Semiautomatic milling machine with four electrospindles for water slot MLA WS42 EVO, new Njdpewqlmdjfx Akuowg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 8,369 h, load capacity: 2,500 kg, lifting height: 4,860 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, power: 30 kW (40.79 HP), Equipment: air conditioning, cabin, lighting, sideshift, Diesel Forklift LINDE H25D-02 EVO Year: 2018 According to meter: 8,369 hours 30 kW 2.5 tonne lifting capacity 2.20 m overall height 4.86 m lift height - Triplex free lift mast - Side shifter - 4th hydraulic circuit to fork carriage - Fully enclosed cab with heating, radio and AIR CONDITIONING! - TWIN TYRES! - Attractive forklift - Ready for immediate use - Good tyres - Work lights Sale price: €15,900 net Affordable delivery available! Nwjdpoy Dz Anjfx Akusg

Condition: ready for operation (used), Year of construction: 2012, Axes: 5, travel X/Y/Z: 400mm/400mm/375mm, spindle speed: 18000rpm, power: 35kW, tool holder: HSK-A63, tool positions: 60, rapid traverse: 30m/min, table dimensions X/Y: 480mm/480mm, max. workpiece weight: 250kg, machine weight: approx. 8150kg, operating hours: approx. 50950h, spindle hours: approx. 20200h. The lifting and swivel unit of the pallet changer are defective. Documentation available. An on-site inspection is possible. Nedpfxowwvw Hj Akujwg

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Nwedjxlkg Aspfx Akuog Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 20 h, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine and the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. Available from stock: HAEUSLER EVO 31031 4-roll round bending machine / roll bending machine Manufacturer: Haeusler Type: EVO 31031 4-roll round bending machine / roll bending machine Origin: Germany / Switzerland Year of manufacture: 2024 Condition: NEW, exhibition machine Availability: immediately Performance: Working width 3100 mm Round bending capacity 14 mm Bending capacity 12 mm Njdpfx Asxwmb Hekujwg Not the right machine? As a representative of Haeusler, we can put together and offer you your desired machine according to your requirements. Please do not hesitate to contact us.

Condition: new, functionality: fully functional, Year of construction: 2025, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine, as well as the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. HAEUSLER EVO 21015 4-Roll Bending Machine / Roll Bending Machine Manufacturer: Haeusler Type: EVO 21015 4-Roll Bending Machine / Roll Bending Machine Origin: Germany / Switzerland Condition: NEW, Display Machine Availability: 12-14 weeks Capacity: Working width 2100 mm Rolling capacity 12 mm Pre-bending capacity 9 mm Standard Equipment: • Variable swing arm adjustment of the side rollers VSA® • HAEUSLER Hybrid Drive System HHDS® • Movable 21.5" touchscreen control panel including high-end BENDtronic® control • Continuously adjustable rotation speed between 0 and 8 m/min • Machine prepared for remote maintenance • Electromechanical holding system for the rotation of the upper roller Nwodpfsxnnf Iox Akusg • Automatic pressure adjustment of the lower roller • Automatic pressure compensation of the Bottom roll cylinders: Standard cooling system for ambient temperatures up to 35°C • Automated axis optimization • Automatic hydraulic shutdown for roll positioning • Ultra-compact design to reduce or even eliminate foundation costs • Safety ripcord Optional equipment: • Two-roll drive for the top and bottom rolls • Cone bending device for bending conical workpieces • Advanced cooling system for ambient temperatures up to 45°C • Top support for easier bending of large diameters • Side support for assisting with bending of large diameters • Gas pressure accumulator for calibrating previously welded cylinders • BendIT-Office workstation software • Autonomous bending • Machine prepared for quick top roll changes • Interchangeable top rolls with different diameters for bending small-diameter sections • Hardened rolls for bending black and stainless material • Infeed roller conveyor for easy sheet feeding into the machine • Centering device for the infeed roller conveyor, for automatic centering of sheets before bending Not the right machine? As a Haeusler representative, we can customize and offer you the machine you need. Don't hesitate to contact us.

Condition: new, Year of construction: 2024, operating pressure: 140 bar, total length: 800 mm, total height: 1,700 mm, total width: 1,000 mm, water tank capacity: 95 l, power: 3 kW (4.08 HP), temperature: 45 °C, TurboClean Evo II is a professional high-pressure washer made of stainless steel. The washing process takes place in closed circuit with water with special detergent with max. temperature 45oC. Working pressure is 140 bar, thereby hard to reach places and heavily soiled items of carbon deposits, grease or oil can be thoroughly washed. The flap is equipped with pneumatic drives, to increase the safety and the quality of work the washing machine. It is also equipped with oil skimmer, a brush and an air gun. There are cleaning nozzles installed on the window, which improve visibility and ease of work. Nwodjq Ru Amjpfx Akueg It is a perfect solution for workshops and parts remanufacturing. Manufactured in Poland.

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages Njdpfx Ajy Uhxkjkuewg - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: used, Year of construction: 2007, functionality: fully functional, 1 lot approx. 15x Revo END KSB ROLL servomotors Valve quarter-turn actuator Actuator ACTAIR NG 5 F05/07 End ZA27-ED63 Revo RD501200500000 Only for sale complete Used from roll car wash disassembly Item location is 75053 Gondelsheim Nodoum I Sfepfx Akuewg Used condition, see pictures Shipping by forwarding agent or collection by appointment

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. Nwedpfx Akjqxandoujg So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. Nwodpfjp Stgnjx Akuog In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Roll forming roof panel machine F3 with cover Roll forming roof panel machine F3 is roofing equipment that is used in process of standing seam roof panel production and standing seam roofing installation. With help of electric motor torque goes from motor through sprockets and the connection chains to the rolling rollers of the machine making them to rotate and form necessary profile. In order to protect workers while working with roll forming roof panel machine, we offer to equip it with standard side covers and additional top part cover to protect forming part of machine. So, using standing seam roofing machine F3 with protective covers operators of machine will be protected from injury, and machine would be protected from any outside object to get into working mechanism. However, while working with roof machine, it’s possible to take off upper cover and leave side covers of machine while working. If upper cover isn’t needed you can purchase machine without it. Our roll former standing seam machine is light and mobile one so you can work with it at your workshop or directly at roof installation place saving money on transportation expenses. Roll forming roof panel machine F3 has special adjusting screw to adjust machine for different panel width production. You just need to rotate adjusting screw to get necessary panel width sizes. Nwedpfx Akoh R I Iuoujg Standing seam roof machine F3 can work with different materials such as steel, aluminum, copper. Machine can be adjusted to roll different metal thicknesses. As additional options with F3 machine you can get: length measuring device ribbed panel rolls radius panel rolls cross cutting knife floor decoiler hand seamers electric seaming machine ESM-1 sliding clip formers ribbed panel forming machine RPFM

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix Nodpfx Ajh Aw Rnekujwg The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: excellent (used), Year of construction: 2023, Dual-fuel burner Elco 3980kw EKEVO 7.3600 GL Weishaupt Nwsdpewrlaysfx Akueg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 33,749 h, machine/vehicle number: A1240A0497, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS Travel Range X-Axis: 4,000 mm Travel Range Y-Axis: 2,000 mm Travel Range Z-Axis: 115 mm Maximum Workpiece Weight: 1,700 kg Maximum Speed: 140 m/min Positioning Accuracy Positioning Deviation Pa: 0.1 mm Average Positioning Accuracy Ps: 0.03 mm Laser Data Maximum Laser Power: 4,000 W Wavelength: 10.6 µm Sheet Thickness Mild Steel: 25 mm Sheet Thickness Stainless Steel: 15 mm Sheet Thickness Aluminum: 10 mm MACHINE DETAILS Control: CNC Sinumerik 840D SL Total Power Consumption: 11–65 kW Beam-On Time: 19,152 h (as of 28.08.2025) Laser-On Time: 33,749 h (as of 28.08.2025) Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine Weight: 14,000 kg EQUIPMENT Automatic longitudinal pallet changer Longitudinal chip conveyor Oil vaporizer PierceLine FocusLine NitroLine PlasmaLine TruFlow 4000 CO2 laser with optimized standby mode Maintenance-free radial turbine High frequency excitation TASC laser control Laser power control Laser logbook LensLine with status monitoring Cutting head with 250 mm focal length Quick-change cutting head device (UTI) ControlLine Lens with RFID chip ContourLine Nsdpfx Aoy Rqngskuswg Micro-welding FastLine AdjustLine Internet remote services FlyLine Easy workshop programming

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: TET031P5 - 2200320948, cooling capacity: 8.98 kW (12.21 HP), type of input current: three-phase, type of cooling: water, overall weight: 331 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 1.5 m³/h, pump pressure: 5 bar, total width: 660 mm, total length: 1,315 mm, total height: 1,373 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process air cooler/chiller/chilled water unit, air-cooled, Type: TAEevo Tech 031 P5-NF MTA S.p.A. TAEevo Tech 031 P5-NF are air-cooled, compact chilled water units suitable for outdoor installation (-5°C to +46°C). Includes crankcase heater, phase monitoring, 115-liter buffer tank, built-in P5 high-pressure pump, open expansion tank (14 liters), and evaporator in a NON-FERROUS design. Chilled water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 8.98 Chilled water temperature outlet/inlet (°C): 7 / 12 Volume flow (m³/h) 1.5 Available pump pressure (bar) 5 Ambient temperature (°C) 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Nwjdpfowzk Egsx Akuog Max. power consumption (kW) 6.6 Max. current (A) 12 Starting current (A) 47 Protection class: IP54 Dimensions: Length (mm) 1315, Width (mm) 660, Height (mm) 1373, Weight (kg) 331 Connection Rp 1" Serial No.: 2200320948 Year of manufacture 2018 Condition: Visually 2, Technically OK Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty Used machines may have visual defects due to their use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, W-KRONEN HP10 LT500 Compressed Air Compressor with integrated Aerotec Refrigerated Compressed Air Dryer Aerodry PRO 1000 The W-Kronen HP10 LT500 is a powerful and reliable air compressor designed for demanding applications in trade, industry, and workshops. In combination with the integrated refrigerated compressed air dryer, this system provides a compact, efficient, and ready-to-use complete solution for producing high-quality compressed air. Nwsdjy Uwt Dopfx Akueg Technical specifications: - Tank size: 500 L - Tank pressure: 10 bar - Intake capacity: 1100 L/min - Delivery rate: 950 L/min - Speed: 1200 rpm - Sound pressure level LWA/dB: 97/78 - Motor kW/hp: 7.5 / 10 - Voltage/Hz: 400 V / 50 Hz, 16A plug

Year of construction: 2007, condition: ready for operation (used), Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible. Nsdpfxoy U Nrfo Akuswg

Condition: used, Year of construction: 1979, functionality: fully functional, Spindle press W+N A. Neher Maschinenfabrik, Aschaffenburg Nsdjy U Ekdopfx Akujwg Type HSP-1670 Year of manufacture: 1979 Weight: 635 kg Pressing force: 16 tons Working stroke, max.: 250 mm Distance from table to ram: 370 mm Column width: 500 mm Working area: 500x400 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 57,202 h, pressing force: 173 t, stroke length: 365 mm, total height: 3,100 mm, overall weight: 18,000 kg, controller manufacturer: TRUMPF, number of axes: 8, This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine. Njdpfx Aox D Ilyokuowg Machine Benefits Technical Machine Benefits • Distance between column: 3680 mm • Distance beam - table: 535 mm Extra Information Machine still under power Dimensions Machine Depth 5000 mm Technical Specification Bending Length 4080 mm