Used Tsi Airflow Lca301 for sale (482)

Condition: used, Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/enclosure type: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm Hjdpfozlbqrjx Anyou AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for container l...

Condition: used, Year of construction: 2022, Demonstration Unit Year of Manufacture: 2022 Condition: Like new, 0 operating hours Features and Technical Specifications: - Sound-insulated, “Silent and SaveEnergy” - With automatic shutdown - 2 fans, speed controlled via inverter - Jet cleaning - Filter categories M and H3 - Filter area: 50 m² - Airflow: 6,927 m³/h - Negative pressure: 3,365 Pa - 4 collection containers Hodpfx Aezwqd Sonysu - Motor: 2 x 5.5 kW - Total power consumption: 11 kW - PLC touchscreen control - Intake port: 350 mm - Weight: 1,160 kg - Dimensions: 3,900 x 1,620 x 2,660 mm - Current list price: over €30,000 net, ex works

Condition: excellent (used), Year of construction: 2022, Extraction connection, D 140mm Chip collector capacity 200L Airflow rate [m³/h] 2500 Hjdpfx Anozxql Eoyju 3 kW, 400V

Condition: used, Leak test device/pressure test device for ventilation ducts Manufacturer: Airflow UK Type: LM 1 Hjdpfx Ajcxb Haenyou Serial number: 125674 4 meters of hose 230 Volts Documentation available

Condition: not inspected (used), Welding Technology Complete Package – Kemppi, Artec & Kemper MIG/MAG, TIG and electrode welding / Welding fume extraction / Oxy-fuel welding For sale is a comprehensive used welding technology complete package for professional workshop and industrial use. It includes welding machines for MIG/MAG, TIG and electrode welding, wire feeder, welding fume extraction and oxy-fuel / flame cutting equipment. Technical data: Kemppi RA 450 W MIG/MAG welding power source Manufacturer: Kemppi, Finland Model: RA 450 W Serial number: 6224531 Welding process: MIG/MAG Welding current range: 40–450 A 450 A / 36.5 V at 45% duty cycle 400 A / 34.0 V at 60% duty cycle 310 A / 29.5 V at 100% duty cycle Mains connection: 380 V / 50 Hz / 3-phase Integrated water cooling Mobile industrial design Kemppi FU 20 wire feeder Manufacturer: Kemppi, Finland Model: FU 20 Device type: MIG/MAG wire feeder Wire feed speed: stepless 0–18 m/min 2-cycle/4-cycle operation Suitable for Kemppi RA 450 W Artec TIG 250 AC/DC TIG welding machine Manufacturer: Artec / W-TEC Schweißtechnik GmbH, Bochum Model: TIG 250 AC/DC Factory number: 00301991 Welding process: WIG/TIG AC/DC Welding current range: 6–260 A 250 A at 60% duty cycle / 200 A at 100% duty cycle Open circuit voltage: 68 V Mains connection: 380 V / 50 Hz Power consumption: 14 kVA Protection class: IP23 AC/DC and pulse operation Water-cooled TIG torch with hose pack Hodpfjzwfppsx Anyeu Mobile industrial design Artec GL 320 welding machine Manufacturer: Artec Model: GL 320 Welding current: up to 320 A Stepless welding current adjustment Adjustable arc dynamics Remote control connection Three-phase connection Mobile industrial design Kemper welding fume extraction unit Type 91510 Manufacturer: Kemper GmbH, Vreden Type: 91510 Machine number: 8708418 Device type: mobile welding fume extraction / filter unit Airflow rate: 1,200 m³/h Static pressure: 145 mm WS Power: 0.75 kW Rated current: 2.0 A Connection: 380 V / three-phase With two extraction hoses/arms and extraction hoods Mobile cutting / oxy-fuel flame cutting carriage Manufacturer / Type: not identifiable For oxy-fuel flame cutting and welding Design for oxygen and fuel gas Robust two-wheeled industrial design With hand cutting torch, pressure regulators / gauges and oxygen and fuel gas hoses Equipment / Scope of delivery: Kemppi RA 450 W Kemppi FU 20 wire feeder Artec TIG 250 AC/DC Artec GL 320 Kemper Type 91510 welding fume extraction unit Mobile cutting / torch carriage Oxy-fuel welding and flame cutting equipment TIG torch and hose pack MIG/MAG hose and connection packs Hand cutting torch Pressure regulators / gauges Oxygen / fuel gas hoses Connection and welding cables Further accessories as shown in the pictures Condition: Used. Optical condition as shown in the pictures. Normal age-related signs of wear are present. All machines, devices and accessories are offered in their existing condition. No functional test has been performed. The devices are explicitly understood to be untested. Items not explicitly mentioned or only shown in the background are not part of the sale. Shipping by freight forwarder possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 2016, operating hours: 3,409 h, load capacity: 2,000 kg, lifting height: 6,330 mm, fuel type: electric, mast type: triplex, construction height: 2,775 mm, empty load weight: 3,900 kg, mileage: 3,409 km, Triple-mast reach truck. Large tires. Brand: Still (Germany). Year of manufacture: 2016. Hours: 3,409. Maximum lifting height: 2,775 mm. Lifting height: 6,330 mm. Capacity: 2,000 kg. Equipped with: FREELIFT and sideshift. Battery replaced in 2021, includes charger and automatic filling system. Watch the video on YouTube. Hsdpfozxzd Esx Anyou

Year of construction: 2020, condition: ready for operation (used), A comprehensive machine package for textile processing, automatic cutting, laser cutting, industrial sewing operations, punching and riveting is offered. 1) CNC cutting table Atom FlashCut 222, year of manufacture 2020, machine weight: approx. 650kg, the machine will be available at the end of 2026. 2) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow: 320m³/h. 3) Single-needle lockstitch flatbed machine with triple feed and large vertical hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 4) Single-needle high-speed lockstitch machine Juki DDL-9000B-SS, year of manufacture 2019, max. sewing speed: approx. 5000stitches/min, max. stitch length: approx. 5mm, needle bar stroke: approx. 30.7mm. 5) Single-needle high-speed lockstitch machine Dürkopp Adler 261-140342-02, max. stitch length: approx. 5mm, control: AHE59. 6) Post-bed sewing machine Pfaff 591-900/81-BL. 7) 2x identical swing-arm cutting presses Moneus 1333. 8) 5-thread overlock machine Chee Siang Golden Wheel CSK-2516D-03/S35-3x5. 9) Manually operated riveting and setting machine with mechanical foot operation. 10) Rotary screw compressor Kaeser Aircenter SM 13, year of manufacture: 2020, motor power: 7.5kW, max. operating pressure: 11bar, motor speed: 2955rpm, control: Kaeser SIGMA CONTROL 2. Documentation available. Inspection possible by appointment. Hodpfxozt Skxs Anyou

Condition: good (used), mileage: 693,819 km, power: 302 kW (410.61 HP), first registration: 08/2020, fuel type: diesel, tire size: 315/70 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2020, Equipment: USB port, air conditioning, central locking, electric window regulation, fog lights, fridge, parking heater, power mirror, retarder, soot filter, spoiler, = Additional Options and Accessories = - 2 beds - Airflow system - Aluminum fuel tank - Roof spoiler - FCW (Forward Collision Warning) - Speed limiter - LDWS (Lane Departure Warning System) - Alloy wheels - Engine brake - Particulate filter - PTO (Power Take-Off) - Radio/CD player - Sleeper cab - Side fender - Auxiliary air conditioning - Tool kit = Notes = Retarder Garder Denver air compressor Auxiliary air conditioning Auxiliary heater Roof spoiler Airflow system Refrigerator Fog lights USB LDWS FCW = Further Information = General Information Cab: Highline Technical Information Number of cylinders: 6 Engine displacement: 12,742 cc Axle Configuration Tire size: 315/70 R22.5 Axle brand: Anders Brakes: Disc brakes Front axle: Max. axle load: 7500 kg; Steered; Tire tread left: 65%; Tire tread right: 65%; Suspension: Parabolic suspension Rear axle: Double tires; Max. axle load: 11500 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50%; Suspension: Air suspension Hjdpsz Auppefx Anyju Weights Unladen weight: 7,771 kg Payload: 11,229 kg GVW (Gross Vehicle Weight): 19,000 kg Interior Interior: gray Condition Technical condition: good Optical condition: good Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Power supply: 400 V. Frequency: 50 Hz. Electrical power: 17.4 kW. Phases: 3 Ph. Maximum compressed-air pressure: 14 bar(e). Maximum compressed-air temperature: 70°C. Permissible ambient temperature: min. 0°C / max. 40°C. Refrigerant: R410A. Refrigerant charge: 10.5 kg. Refrigerant GWP: 2,088. Maximum high-side refrigerant pressure: 40.6 bar. Maximum low-side refrigerant pressure: 30 bar. Certifications: CE / EAC. Hodpezvcdbsfx Anyeu Indicative airflow for this model: approximately 1,750 l/s, equivalent to around 105 m³/min or 6,300 m³/h. Approximate dimensions: Length: 1,474 mm × Width: 1,579 mm × Height: 2,295 mm. Approximate weight: 910 kg.

Year of construction: 2020, condition: used, This listing is for the Labogene ScanLaf Mars 1500 Class II biological safety cabinet The unit is in full working condition and ready for immediate us The Labogene ScanLaf Mars 1500 is a Class II biological safety cabinet designed to provide operator, product and environmental protection. It features HEPA filtration, vertical laminar airflow, motorised front window and adjustable lighting. The working width is 1500 mm and the cabinet is manufactured and tested to EN 12469 requirements. External dimensions are approximately 1604 x 797 x 2033 mm and weight is approximately 275 kg, excluding the stand. Transparency Report and Technical Audit: Software and Media Disclosure: Hsdpfxez D Dl Ts Anyju As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Year of construction: 1999, Used Equipment Features and Technical Specifications: - Centrifugal fan with V-belt drive - Suitable for use in both raw air and clean air applications - Steel impeller with steel blades mounted on a multi-bearing intermediate shaft - Air discharge direction GL 360/5 - Connection: 300 mm - Motor power: 11 kW - Airflow: 7,000 m³/h Availability: Immediate Hodszk Niyspfx Anyou Location: Röllbach

Condition: used, first registration: 12/2025, 10-Foot Container Sauna Mobile outdoor sauna based on a 10-foot shipping container (external dimensions approx. 3.0 m length × 2.44 m width × 2.59 m height), repurposed into a fully equipped sauna with glass front, multi-level benches, and technical installations. The structure retains the robust steel construction of the container as a weatherproof outer frame, complemented by high-quality wood interiors, insulation, and glass glazing for optimal outdoor use. It is stackable, easily transportable, and designed for installation on level ground without a foundation. Base structure and exterior Hodpfx Asx Nb E Tonysu * Container made from powder-coated steel (anthracite grey) with ISO corner fittings and reinforced profiles for stability and weather resistance. * Fully open longitudinal side with a three-part glass front made of clear safety glass (sliding doors with stainless steel handles and floor seal) for panoramic views and natural light. * External fittings: cold water column with tap and ball valve, optional shower with spray head, ventilation opening with grille at the base of the container. Interior and sauna setup Walls, ceiling, and floor fully clad in thermally treated wood (e.g., spruce or aspen, light natural color) 14-20 mm thick, three-tier seating benches with backrests and footrest. * Bench configuration: lower bench approx. 40 cm high, middle approx. 90 cm, upper approx. 140 cm; ventilated slat construction for airflow and comfort. * Floor equipped with sealed wooden decking and drain, small headrest, and integrated stone unit at the heater. Technical features and equipment Electric sauna heater (approx. 6-9 kW) with stone basket (about 20 kg olivine stones), wall-mounted control panel, and automatic overheating protection. * Ventilation: fresh and exhaust air vents with sliders (internal and external), smoke outlet and grill at ceiling/wall, indirect LED lighting behind benches. * Electrical installation: protected wiring with switches for heater and lights, integrated thermometer and hygrometer. Installation and mobility Set up on container feet directly on gravel or concrete, total weight approx. 1,200-1,800 kg, ventilated and drained. * Transport possible via forklift or crane, weather-protected seals on all openings.

Condition: good (used), Year of construction: 2012, operating hours: 6,400 h, Jungheinrich DFG425S, duplo435, free-lift, side-shift forklift, 6400 hours, 2012. A video can be sent via WhatsApp. We have a continuous stock; see our website. Hedpfx Aoz Da Tgenyju Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand as we are not always available. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Cyclone Diameter: 1295 mm (51 in) Hsdpfxozunvae Anysu Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel - Vibrator - Rotary valve discharge

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 7.5 kW – 400 V - 1,500 rpm - Extraction nozzle diameter 250/350 mm - Airflow 7,000 m³/h - 2,900 Pa - ATEX-certified for explosive dusts - Dimensions approx. 1,200 x 1,170 x 800 mm Hsdpjzk N Uvsfx Anysu Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2021, Dust extraction system Manufacturer: Felder Type: RL 300 Year of manufacture: 2021 - Like new, never used - Technical data - Airflow rate: max. 6000 m3/h - Rated airflow rate at 20 m/s: 5090 m3/h - Negative pressure at the total connection at 20 m/s: 2680 Pa - Dust extraction connection (can be mounted on the left or right): 300 mm - Filter area: 50 m2 - Sound pressure: 75 dB - Chip collection container (liters): 2 x 250 l Hsdpszv Tmmofx Anysu Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Pressing tool for ventilation ducts Manufacturer: Airflow UK Serial number: 125674 4-meter hose Hjdpfjcgl Uxox Anysu 230 volts Documentation available

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 135 kg, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 2,900 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter KEMPER. For welding, grinding, and all types of dry dust. Hodpfjyz Rt Dex Anyou The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency of the unit. Model: Filter-Cell XL Year of manufacture - 7/2015 Fan power 1.5 kW. Airflow 1000 m3/h Vacuum 2900 Pa Cartridge filter element. Stock no. - 1128 1/2

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 48457-16, type of input current: three-phase, input voltage: 400 V, Mobile Höcker Polytechnik dust extraction unit for extracting wood chips and dry dust from woodworking machinery. The unit is equipped with a large filter bag, a 180-liter collection bag, and swivel casters for easy movement around the workshop. Technical specifications: Hsdpjz Dv T Aefx Anyou Manufacturer: Höcker Polytechnik GmbH Type / group: Gr. 3 Motor power: 2.2 kW Power supply: 230/400 V, 50 Hz Motor speed: 2,800 rpm Airflow rate: 2,460 m³/h Extraction connection diameter: 160 mm Filter area: 3 m² Collection capacity: 180 liters Year of manufacture: 2000 Article number: 90303 Internal reference number: 48457-16 Condition: used, with normal signs of wear and tear. The actual condition and scope of delivery are shown in the photographs. The machine can be inspected by prior arrangement. Location: Gātciems, Latvia. We can assist with loading and arrange transport within Latvia or to other European countries. Price: EUR 500 excluding VAT. For purchases within Latvia, 21% VAT will be added. A 0% VAT sale may be possible for eligible EU companies with a valid VAT number.

Condition: excellent (used), Year of construction: 2021, Technical data: ALKO clean air mobile extraction unit, Hjdpfx Anjw T U Uzeyju Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Inlet diameter: Ø=120 mm, Sound insulated, Mobile separation drum: 135 l, Manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust drum volume: 135 liters, Weight: 117 kg, Nominal airflow (after cleaning): 814 m³/h, Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), mileage: 671,713 km, first registration: 08/2020, fuel type: diesel, tire size: 315/70 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, differential lock, fog lights, fridge, power mirror, retarder, soot filter, spoiler, = Additional Options and Accessories = - 2 beds - Airflow system - Aluminum fuel tank - Roof spoiler - FCW (Forward Collision Warning) - Remote central locking - Speed limiter - LDWS (Lane Departure Warning System) - LED lighting - Alloy wheels - Adjustable steering wheel - Engine brake - PTO (Power Take-Off) - Sleeper cab - Side fender - Side skirts - Differential lock - Toolbox = Notes = Scania R410 Highline FCW + LDWS Auxiliary heater Auxiliary air conditioning Alcoa rims Auxiliary drive (PTO) Gardner-Denver compressor Toolbox = Further Information = General Information Number of doors: 2 Cab: Highline Technical Information Number of cylinders: 6 Engine displacement: 12,742 cc Unladen weight: 7,771 kg GVWR (Gross Vehicle Weight Rating): 7,771 kg Transmission Transmission: Scania, 12 gears, automatic Axle Configuration Tire size: 315/70 R22.5 Axle brand: Anders Brakes: Disc brakes Front axle: Max. axle load: 7500 kg; Steered; Tire tread left: 50%; Tire tread right: 50%; Suspension: Parabolic suspension Hjdpfszz St Aex Anyou Rear axle: Dual tires; Differential lock; Max. axle load: 11500 kg; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Suspension: Air suspension Performance Maximum speed: 90 km/h Interior Interior: gray Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Hsdsxnxm Njpfx Anyeu Technical data: - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter - H3 dust tested - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Reference: R-A0117

Condition: used, mileage: 79,890 km, power: 110 kW (149.56 HP), fuel type: gasoline, gearing type: automatic, first registration: 02/2021, next inspection (TÜV): 01/2028, emission class: euro6, color: grey, number of seats: 5, Equipment: ABS, air conditioning, central locking, immobilizer system, navigation system, LPG GAS SYSTEM!! TOW HITCH/ 19-inch Alloy Wheels!! PARKING HEATER! 1 OWNER App-Connect, Metallic Paint, Rear and Rear Side Window Tinting 3-point rear center safety belt, Storage compartment in the headliner, Airbag driver/passenger side, Passenger airbag deactivatable, Knee airbag driver side, Washer fluid level indicator, Audio system Composition (USB, Bluetooth, Touchscreen color display), Automatic headlight control (ALS) with Leaving Home/Coming Home function, Exterior mirror, aspherical, left, Exterior mirror, elect. adjustable and heated, Exterior mirror, convex, right, Exterior mirror, body color, Bluetooth interface for mobile phone, Roof rails, Dual-tone horn, Parking assist front and rear, Electronic Stability Program (ESP) with brake assist, ASR/ABS, EDS, Trailer stabilization, MSR, Driver Assistance System: Automatic Distance Control (ACC incl. Stop & Go function), Driver Assistance System: High beam assistant (Light Assist), Driver Assistance System: Pedestrian recognition, Driver Assistance System: Multi-Collision Brake, Driver Assistance System: Driver fatigue detection, Driver Assistance System: Lane assist, Driver Assistance System: Area monitoring system (Front Assist) with City Emergency Braking function, Power windows, front and rear, Window trim, black, Windshield laminated glass, tinted (acoustic glass), Floor mats, Textile, Footwell lighting, front, / Roller blind, Luggage compartment lighting, Rear window wiper, Interior: Decorative trim center console Piano Black / glossy black, Interior: Decorative trim Weave, Interior filter: Activated combined filter, Interior mirror with automatic anti-glare function, Proactive occupant protection system, Isofix mounts for child seat on rear seats (including i-Size child seats), Body: 5-door, License plate light, LED, Folding tables integrated in the front and passenger seat backrest, Climatronic air conditioning system with 3 zones, including rear control, Rear headrests (3-way), Loudspeakers (8), Lumbar support, front, Steering column (steering wheel) mechanically adjustable, Height/longitudinal adjustment, Reading lights, front and rear, LED, Light alloy wheels, Mobile Online Services Preparation We Connect and We Connect Plus, Model refinement, Engine 1.5 Ltr. - 110 kW 16V TSI ACT, Multifunction display Premium (color display), Multimedia interface 2 x USB (Type C) front, Fog light, Non-smoker package, Emergency call system, Gasoline particulate filter (OPF), Parking brake, electric with auto-hold function, Radio reception digital (DAB+), Wheelbase 2678 mm, Tire pressure monitoring display, Rear seat split / foldable, sliding, center armrest and through-loading function, Low emissions according to exhaust standard Euro 6d, Gear/selector lever knob, leather, Headlights, LED, Drawer / storage compartment under front seats, Side airbag, front with head airbag unit, Power steering, electromechanical and speed-dependent, Seat belts, rear, outer with belt tightener, Seat belts, front with belt tightener, height adjustable, Seat cover / upholstery: Fabric Shooting Star, Front seats, height adjustable, Seats: Comfort seats, front, Front right seat backrest foldable, Sun visors with mirror (illuminated), Start/Stop system with recuperation, 12V socket in the trunk/loading area, Bumper, basic, Door handles, exterior, body color, First aid kit and warning triangle, Warning system for seat belts, front and rear Hodpfx Aozc Srijnyeu , Rear and rear side window tinting, Interior mirror, automatic anti-

Condition: good (used), Bacciottini Pit Stop AFSpeed ​​Automatic Creaser The device is fully operational and ready to use. It is the most efficient creasing and perforating system on the market, with a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Two independent compressors (suction and airflow). The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 100 x 150 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-600 GSM Maximum number of creases per sheet: 100 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 400 V Power consumption: 3.5 kW Weight: 200 kg Dimensions: 1600 x 800 x 1200 mm Hsdjz Dtayepfx Anyju

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table that rotates 180 degrees with each cycle. In the middle part of the machine frame, there is the working area with the welding station, the tool (on the rotary table), and the clamping device for the product. The control cabinet is installed at the rear. The welding station is protected against the loading/unloading area with a laser-safe enclosure. The welding laser (the laser power supply) is switched off when a maintenance door is opened. The loading and unloading of the welding parts is done manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding of various plastic parts (front frames). For components with dimensions of approximately 460 x 280 mm. Basic data Machine equipment: 1 complete machine frame with enclosure, substructure, and safety devices, painted Hodpfx Anozgaazsyeu Adjustable machine feet, designed for transport with a forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock. 4 manual maintenance doors below the machine table. The control cabinet is permanently mounted on the rear of the machine. Laser system manufactured by IPG. 1 fiber laser, 300W cw, at the fiber optic end, 1070nm, completely air-cooled. 1 power supply for the laser unit, target beam laser, and fiber optic cable. 1 Vario-Scan for 3D welding contour. 1 scanner - 20 aperture. Optics, F-Theta lens, focal length determines the processing field and processing distance. 2x base tool, tool coding with transponder. Clamping/tensioning system for holding a mask with absolute encoder. with pneumatic clamping system for controlled pressing of each welding part. Pneumatic air shower for protection of the lens housing. Microbox PC427B incl. RTX (Siemens). Pre-installed software, Siemens S7 PLC. Profibus, Profinet, Ethernet, RS232 interface. Touch panel 15" for operation and input of data/parameters. Machine lighting. Connection flange for external extraction system. Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Permanently screwed to the machine frame. Area required W x D: 5400 x 5400mm Technical data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Fuse rating: 16A Exhaust: Nominal size ∅160 Airflow rate 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: used (Changes and errors in the technical data are reserved!) We are happy to answer any further questions you may have by telephone.