Used Tuthill Kinney Kt-505 Lp for sale (4,331)

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Lhsdpfx Amezdny Rsmoh Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Lhodpfezdnxgjx Ammjh Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 3820221000205, overall weight: 139 kg, total width: 600 mm, total length: 1,130 mm, total height: 1,530 mm, input voltage: 400 V, type of input current: three-phase, power: 4 kW (5.44 HP), Nilfisk Three-Phase Industrial Vacuum Cleaner T40W LP FM The three-phase industrial vacuum cleaners T40W are designed for demanding cleaning tasks in commercial and industrial environments. This wet and dry vacuum cleaner comes equipped with a powerful side channel blower, making it suitable for continuous operation. T40W LP FM Lhjdpfxeymx Huo Ammjh The three-phase industrial vacuum cleaners T40W are built for heavy-duty cleaning applications in commercial and industrial settings. This wet/dry vacuum features a robust side channel blower and is intended for continuous use. Suitable for deployment in the metal and chemical industries, construction, rubber, plastics, and porcelain processing industries, food sector, textile industry, packaging area, as well as all types of workshops. The rugged and durable all-steel construction with powder coating ensures a very high standard of quality. Thanks to a compact chassis with large wheels and swivel casters, the industrial vacuum is easy to maneuver. High-quality star filters with long service life guarantee excellent filtration performance, even for fine or problematic dusts. The very ergonomic handling, thoughtfully designed emptying options with 50-liter or 100-liter waste containers or Longopac, and manual filter cleaning make the T40W industrial vacuums efficient cleaning tools for plant or machine cleaning. In addition to solid materials, liquids or oils can also be vacuumed. The quiet, maintenance-free 4.0 kW three-phase motors are designed for continuous operation. The T40W provides increased air performance.

Condition: used, Year of construction: 1981, total length: 2,000 mm, total width: 1,100 mm, total height: 2,300 mm, Empty weight: 500 kg - Year: 1981 - Documentation available: No Ljdpfoxhcgyox Ammehh - CE certificate present: No - Press force [ton]: 63 - Table length [mm]: 710 - Table width [mm]: 505 - Ram width [mm]: 280 - Throat depth [mm]: 250 - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Here, we offer a laser marking system. Product features: Class 4 CO2 laser Micro-marking Wavelength: 10.6 microm, 0.417 mil Laser power, continuous wave: approx. 30 W Speed: 240 m/min or less Weight of marking head: 20 kg Weight of control unit: 12 kg Marking field size with process area cover: 0-55 mm or 0 - 2.2 inches Permitted ambient temperature: 0 - 40 degrees Celsius Permitted humidity: 35% - 85% Requires 90V to 132VAC, 180V to 264VAC, 50/60Hz Air-cooled Printing options: letters, numbers, katakana, hiragana, kanji, symbols, up to 50 user-defined characters, QR code, Micro QR code, Data Matrix, GS1 Data Matrix, and bar codes Type: LP-431-C Lhsdjzdqpzspfx Ammjh Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer a laser marking system. Product features: Class 4 CO2 laser Micro-marking Wavelength: 10.6 micrometers (0.417 mil) Laser power, continuous wave: approx. 30 W Weight of marking head: 20 kg Weight of control unit: 12 kg Marking field size with process chamber cover: 0-55 mm or 0-2.2 inches Permissible ambient temperature: 0-40 degrees Celsius Permissible humidity: 35% - 85% 100 V AC: 1,000 VA or less 200 V AC: 1,200 VA or less Air-cooled Printing options: letters, numbers, katakana, hiragana, kanji, symbols, up to 50 user-defined characters, QR code, Micro QR code, Data Matrix, GS1 Data Matrix, and bar codes Type: LP-431U-C Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone. Lodszdqpnopfx Ammohh

Condition: ready for operation (used), functionality: fully functional, From a workshop for people with disabilities: Functionality tested. Shrink tunnel + angle welding machine from AVC. Model HS 500 + KT 500 gas. Shrink tunnel, 380 volts. Angle welding machine, 220 volts. Individual purchase also possible. Ledpfx Aozdq Nuemmehh

Condition: used, Year of construction: 2014, machine/vehicle number: M289, Used filling monoblock ALFATEK MBC 7/1 LP ELVIRA for re-fermented beer year 2014 This filling monoblock offers a compact and efficient solution for bottling re-fermented beer in glass containers. Consequently, Alfatek manufactured this machine with a gravity filling system to ensure a stable process that meets industry standards. Technical Features of the Used filling monoblock ALFATEK ELVIRA for re-fermented beer The ALFATEK MBC 7/1 LP ELVIRA filling monoblock for beer year 2014 includes 7 fixed filling valves, specifically designed to process beer in 0.33 L and 0.75 L glass bottles. Moreover, the gravity filling  prevents organoleptic alterations, and significantly reduces the risk of foam formation during filling. Lsdpfx Aov N Dcijmmjhh In addition, the integrated capper features 1 capping head for 29 mm crown caps, ensuring a secure and effective seal. Furthermore, this capping system works in synergy with the gravity filling process to maintain the internal pressure stability of the bottles. Operational Specifications Notably, the monoblock fills up to 1,000 bottles per hour, making it ideal for small to medium-sized production lines. As a result, bottles move through the system with a clockwise rotation, thereby optimizing workflow efficiency. Along with the monoblock, the conveyors are also included in the sale. They have the following dimensions: 1.80 m in length, maximum width 52.5 cm, minimum width 25 cm. Regarding electrical specifications, the Used filling monoblock ALFATEK ELVIRA for  re-fermented beer operates at 415V and 50Hz. Therefore, it remains compatible with most industrial plants. Safety and Structure of the Used filling monoblock ALFATEK ELVIRA for re-fermented beer Importantly, the machine includes safety devices that protect the operator during operation. Additionally, its compact structure measures 1,190 mm in width, 1,900 mm in length, and 2,330 mm in height, allowing seamless integration into existing production lines without major modifications. Current Condition and Availability At present, the Used filling monoblock ALFATEK ELVIRA for re-fermented beer remains in storage. Thus, it is ready for inspection and installation in a new production facility. Given its robust structure and advanced technical features, it presents a reliable choice for breweries looking for a high-performance and tested machine. Ultimately, this monoblock provides a valuable opportunity to improve production efficiency. Likewise, it represents a strategic investment in a well-maintained used system. Consequently, breweries can optimize their operations while reducing acquisition costs. Additionally, its compatibility with industry standards ensures smooth integration into various production setups. Therefore, this machine offers both efficiency and reliability, making it a practical choice for modern bottling facilities.

Condition: used, all stainless steel 3 tiers nett belt length ± 5.800 mm nett belt width ± 940 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 7.200 x 1.400 x 2.900 mm + Evaporator "Goedhart B.V." Type LLK.s 411m² manufacturing number: PJV100282 Lsdpfx Amezc I H Nomshh Year of manufacture: 2010 Capacity: 135 dm³ Refrigerant: NH3 Weight: 770 kg, Working pressure: 22 bar Test pressure: 32 bar Overall dimensions including cooling panels and stainless steel door: 7.500 x 2.700 x 3.300 mm

Condition: good (used), functionality: fully functional, load capacity: 7,500 kg, Welding rotary table, Tehag, 7500 kg load capacity Very robust Condition: very good Diameter: 1500 mm Height in horizontal position: 1150 mm Height in tilted position (to center): 950 mm Variable speed: 0.01 - 1.5 rpm Tilt: max. 135°, infinitely adjustable Length: 2.6 m Width: 1.4 m Handheld and foot-operated remote control Lhodpfszfpmhex Ammjh

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 760 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 760 mm, controller manufacturer: FANUC, controller model: Series 18i-MB, workpiece height (max.): 800 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 120, tool length: 400 mm, tool weight: 15 g, Equipment: chip conveyor, documentation/manual, horizontal machining center with pallet changer, two pallets 500x500, 120 tool positions, probing system. Ljdpfxozdqvzj Ammshh

Condition: ready for operation (used), Measuring and evaluation electronics: Rotortest 505, balancing planes: 1/2, max. rotor weight: 300kg, max. rotor diameter: 1400mm. Documentation available. An on-site inspection is possible. Ledpszdkpnofx Ammohh

Condition: used, mileage: 28,000 km, power: 63 kW (85.66 HP), first registration: 07/1979, fuel type: diesel, overall weight: 6,500 kg, next inspection (TÜV): 07/2027, color: red, gearing type: mechanical, number of seats: 9, total length: 6,000 mm, total width: 2,370 mm, total height: 2,750 mm, loading space length: 2,730 mm, loading space width: 2,270 mm, loading space height: 1,630 mm, Year of construction: 1979, 1st owner. Meticulously maintained and thoroughly restored vintage vehicle. Registered until 2026 and part of the regular fleet of a German industrial operation. Always parked in a modern heated fire station and regularly driven. The Mercedes was completely overhauled and repainted in 2002. Technical inspection (TÜV) valid until 07/2027, renewed just 130 kilometers ago. LF8 fire engine with ZIEGLER body and front-mounted FP8/8 pump. WITHOUT fixed water tank! OM314 industrial diesel engine with 3,758 cc displacement. 5-speed manual transmission. Top speed: 82 km/h (no faster, but you always reach your destination reliably, no matter how long the journey). Large crew cabin. 9 seats. 4 doors. Storage compartments under the rear benches, charging trays for hand lamps, shore power connection for battery maintenance. Registered unladen weight: 4,070 kg. (Cannot be reduced further, as trucks of this era were simply built sturdier and with more materials!) Gross vehicle weight: 6,500 kg. Tires from 2013, winter tires 8R17.5, almost full tread and not cracked, in good condition. 1 spare wheel mounted on the roof. Modern rearview camera with monitor retrofitted. Two tow hitches: 1. Ball hitch for passenger car trailers. 2. Small pintle hook. Ledpfx Asy Euw Uommehh Drawbar load: 150 kg and towing capacity: 1,500 kg. These values apply for both braked and unbraked trailers. This LP is in particularly good original condition, starts immediately and runs perfectly. Countless new parts and all necessary investments have been made in this truck to the very end. In recent years, for example, the fuel tank has been replaced, brake system overhauled, starter batteries (2024), and the gearbox fully rebuilt. A partial set of equipment is included in the sale, at no extra cost: 4-part aluminum extension ladder, suction hoses, adapters, suction strainers, multi-purpose nozzles, hose bridges, breaker hooks and axes, 1,500-watt spotlight, first aid kit, and small parts. Vehicle is immediately ready for operation, regularly serviced, no oil leaks, no repair backlog—a fine vintage truck without power steering and without seatbelts. Classic truck driving as it used to be. This offer is valid only for business customers, freelancers of any kind, and public authorities / emergency services. We do not generally sell to private end users. Subject to prior sale and possible errors at any time. The net price for this beautiful LP 709 is €7,900.00.

Condition: ready for operation (used), SIG Positec Berger Lahr linear positioning system LP-A + gripper unit, consisting of: LP-A (X=300/Z=100), VRDM 3910/50 LWB motors, UCH 325V, IN 2A, MN 4Nm, ROBA-stop-M 4/891.124.1 SO, 24V, 22W, 6Nm, used, in very good condition, 100% functional. Lsdpfx Asi Eclysmmshh

Condition: used, mileage: 21,229 km, power: 96 kW (130.52 HP), first registration: 04/1983, fuel type: diesel, empty load weight: 4,450 kg, maximum load weight: 3,040 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,200 mm, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 5,300 mm, Gebrüder Eicher TLF8/18, water tank 2,100 ltr, pump Lhsdpfx Amsx Ec Aijmeh

Condition: used, mileage: 27,864 km, power: 96 kW (130.52 HP), first registration: 11/1978, fuel type: diesel, empty load weight: 4,490 kg, maximum load weight: 3,000 kg, overall weight: 7,490 kg, tire size: 8.25R16, axle configuration: 4x2, wheelbase: 3,300 mm, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 2,450 mm, total width: 2,650 mm, Equipment: cabin, Vehicle location: Bovenden, Kz. Haus, switch 5, leaf suspension Wheelbase: 3300 mm Superstructure: Fire-fighting vehicle with water tank from 1st ownership, TLF 8, pump FP 8/8, water tank 2240 liters, Ziegler superstructure, engine 6 cylinders OM 352, top speed 89 km/h ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lhedpfsvhha Nex Ammjh - .

Condition: used, mileage: 27,864 km, power: 96 kW (130.52 HP), first registration: 11/1978, fuel type: diesel, empty load weight: 4,490 kg, maximum load weight: 3,000 kg, overall weight: 7,490 kg, tire size: 8.25R16, axle configuration: 4x2, wheelbase: 3,300 mm, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 2,450 mm, total width: 2,650 mm, Equipment: cabin, Vehicle location: Bovenden, Kz. Haus, switch 5, leaf suspension Wheelbase: 3300 mm Superstructure: TLF8 water tender with 2,240l water tank From 1st owner, FP 8/8 pump, Ziegler superstructure, 6-cylinder OM 352 engine, top speed 89 km/h ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lsdpfx Aovhhf Semmshh - .

Condition: used, Year of construction: 1992, Vacuum tumbler Germo KT 2000 (2000L) Equipped with a loading system For sale is a ready-to-use industrial vacuum tumbler Germo (Type: KT 2000) with a drum volume of approximately 2000 liters. Ideal for meat processing plants for efficient processing and marinating. Key data & details: Manufacturer/Type: Germo KT 2000 Capacity: approx. 2000 liters Material: High-quality stainless steel (rustproof) Equipment: Integrated vacuum system with manometer, analog-digital control panel, emergency stop switch, CEE plug Advantages: Rapid brine absorption under vacuum, robust construction, easy cleaning Condition & sale: Lhodpfezb Exgex Ammeh Inspection: Possible by appointment at the location.

Condition: used, ABLEPick Picking tag AT-505 Rev 1.3 RA2336 Lhedjvygx Iopfx Ammeh S/N A17610000-2302 102AT505000004G V1.1 Product dimensions: 147 x 46 x approx. 20 mm Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg

Condition: used, mileage: 39,278 km, power: 63 kW (85.66 HP), first registration: 10/1982, overall weight: 6,500 kg, fuel type: diesel, color: red, gearing type: mechanical, total width: 2,350 mm, total height: 2,750 mm, number of seats: 9, Beautiful LP 709, partially restored as a former LF8 and the case already emptied The integrated body offers the possibility of removing the partition wall and creating a continuous space between the driver's cabin and the equipment structure Ideal conditions, for example, for a spacious mobile home The body, the structure and all doors were professionally repaired by us and repainted, the front with window frame is still in its original, rust-free condition. Ljdpfx Amov Rt Tyjmehh fresh inspection with engine oil and brake fluid change, new fuel filter and lubrication upon delivery, new TÜV including H-approval and on request technical modification to truck we have already doubled the height of the rear underrun protection to comply with applicable regulations Current empty weight as shown approx. 3,750 kg Total permissible weight: 6,500 kg Vmax according to papers: 82 km/h Dimensions: Equipment compartment 2630 x 2200 x 1600 mm (LxWxH) Front cabin from driver's seat: 1450 x 2200 x 1560 (LxWxH) After removing the partition wall, a space of 4800 mm length is created behind the front seats +++ Errors, changes and prior sale reserved

Condition: used, Year of construction: 2006, punching force: 30 t, overall weight: 18,000 kg, For sale is a Finn-Power LP 6 combined punching and laser cutting machine, manufactured in 2006. The machine is currently powered and ready for operation. An on-site inspection can be arranged at any time by appointment. We would be happy to demonstrate the machine in operation so that you can see its technical condition and functionality for yourself. The Finn-Power LP 6 combines punching and laser technology in one machine and is ideally suited for the efficient processing of sheet metal parts with high flexibility and productivity. The laser combination requires cleaning of the beam deflection mirrors; the laser source is operating cleanly. Manufacturer: Finn-Power Model: LP 6 Tool stations: 21 Year of manufacture: 2006 Siemens Sinumerik 840D control system CO₂ laser 2.5 kW Hydraulic punching technology with 300 kN punching force Multi-tool system Forming functions Lhjdpszb Rr Eofx Ammeh Automatic clamping positioning CE-compliant safety equipment Cooling system Extraction system Part conveyor belt Machine is powered Inspection and demonstration possible Immediately available upon agreement For further information, technical data or to arrange an inspection, please do not hesitate to contact us. Available from week 30.

Condition: used, Year of construction: 2026, operating hours: 987 h, functionality: fully functional, machine/vehicle number: 31681614, overall weight: 415 kg, power: 8 kW (10.88 HP), volume flow: 1.14 m³/h, operating pressure: 10 bar, noise level: 81 dB, Equipment: refrigerant dryer, used prototype (immediately available): RENNER Riko 1400/500 M-KT Piston Compressor with 2 x 4.0 kW piston compressors with RENNERtronic Touch control (base load change control + runtime limitation) wall mounting box with galvanized 500-liter tank standing with refrigerant dryer (DTP +3°C) and timed condensate drain with automatic level-controlled tank drainage Year of manufacture: 2026 Operating hours per compressor: 987 h Lhsdpozb Etdofx Ammjh Technical data: Motor power: 2 x 4.0 kW Rated voltage: 400 V Maximum pressure: 10 bar Delivery volume at 7 bar: 1140 l/min Cylinders / stages: 2/2 Noise level: 81 dB(A) Compressed air tank volume: 500 liters Dimensions L x W x H: 1890 x 712 x 1446 mm Weight: 415 kg Shipping possible at extra cost. Leasing offer from our house bank possible for businesses. Takeover at the end of the term by payment of a final installment possible. Creditworthiness required. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: new, Year of construction: 2024, Welding positioner Protec KT 10 000 HV Complete set including hand-held and dual-pedal remote control Ledpfx Aok S D N Ejmmjhh Digital display for speed Hydraulic height adjustment Tilting range from 0 to 130° Dimensions: minimum height when tilted: 1080mm maximum height when tilted: 2200mm minimum height in horizontal position: 1400mm diameter of the clamping plate: 2000mm length: 3250mm, width: 1780mm speed from 0.05 to approximately 0.6 RPM.

Condition: like new (used), Year of construction: 2018, Rated Loading: 3000 Kg Rotating speed: 0,05 ~ 0,6 U/min Tilting speed: 0,5 rpm Worktable size: 1200mm Tilting angle: 0~120° Lhodpfx Ajdt Rhgsmmjh Rotating Power: 1,5 Kw Hydraulik Motor Power: 3 KW Speed adjusting way: VFD Worktable height: 960mm ~ 1910mm Hydraulik system pressure 10 MPa

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding turntable with a plate diameter of 1000 mm. Height: min. 0.65 m, max. 1.530 m. Speed: 0.01 - 1.1 rpm. Tilting angle: up to 135°. Hand and foot remote control with speed display. Very robust. Lhodpfsd D D Hljx Ammjh