Used Ulma Vti440 for sale (90)

Year of construction: 2004, condition: refurbished (used), 2004 double squaring machine, brand Friulmac model Idramat Note: see [VIDEO](?share=copy#t=0) Fgjdpfx Aszz Rnrefuoh

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Fgsdpferivv Ejx Afush Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NVT, type of input current: DC, warranty duration: 24 months, overall weight: 30 kg, filling weight (max.): 30,000 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New filling machine that can be used for filling liquids. This includes: Milk Water Alcohol Disinfectant Etc. A very robust machine that operates on air and 220V, plug and play! Ideally suited for filling small batches. A very small compressor is sufficient to get this machine running. This can also be supplied with the machine. For this, we recommend a minimum 12L version. The filling machine has a 1000ml cylinder, allowing it to fill a maximum of 1000ml per stroke. By having the machine perform multiple strokes, multiples of this amount can also be filled easily. For example, 2500ml can be filled by performing two strokes of 1250ml each. The smallest stroke is 100ml, and any amount between 100 and 1000ml can be filled in a single stroke. We also have models with a cylinder that can fill up to 5000ml per stroke. Fgjdpfx Afsrivxceush Equipped with a suction hose, allowing the machine to draw directly from a drum or IBC. The machine is equipped with a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, allowing for easy and quick filling of larger quantities. The foot pedal allows filling at your own pace. Depending on the operator and the amount of milliliters, between 15 and 25 units can be filled per minute. This makes it a very fast machine. The machine weighs approximately 15/20kg and can be easily placed on a table. It is entirely made of stainless steel, making it a very high-quality machine. If you have any questions, please email us, and we will be happy to assist you with this or another machine. We also have a labeling machine that is a very good complement to the filling machine. We strive to respond to you within 24 hours. We are also available by telephone. We are happy to assist you on working days between 08:30 and 17:00.

Condition: used, Year of construction: 2002, 2002 Friulmac DUALFEED Cutter - Loader for hydraulic, automatic shearer, with electronic size adjustment. Fgedpfx Afezxg Ddouoh

Condition: used, Year of construction: 2008, functionality: fully functional, Friulmac ECOFEED infeed conveyor for four-sided planers Fjdpfx Aez Hn I Dsfujgh Working length: 250-1550 mm Tabletop mounting Automatic and manual cycles

Condition: good (used), functionality: fully functional, units span 1350mm two motors 5,5kW feeding from magazine hydraulic feeder Fgsdpfx Afezz Nizeujh manual regulation of top pressure

Condition: good (used), Year of construction: 1999, functionality: fully functional, A used L&Z lathe, model BULMAK Type: C 8 C, machine number: 8018, year of manufacture: 1999, complete with steady rests, three-jaw and four-jaw chucks, and a 2-axis digital display. Fgjdpszx Enzjfx Afujh

Year of construction: 2016, condition: reconditioned (used), The price refers to a unit from year of manufacture 2016; newer models and options such as external osmosis systems are available upon request! Wider, higher – that’s how the DV 125.2 Universal Washing Machine of the premium class presents itself. This new universal washing machine cleans dishes, transport baskets, GN kitchen containers, pots, cutlery, trays, and even glasses. Thanks to its spacious usable interior – with a pass-through height of 555 mm – items up to 650 x 530 mm (2/1 Gastronorm) can be hygienically washed. This makes it the ideal partner for butcheries and bakeries, as well as for universal use in communal catering and as a commercial dishwasher in gastronomy. Dimensions Width: 735 mm Depth: 750 mm Fsdpsvb Dpgjfx Afuegh Height: 1,590 mm Height with open hood: 2,200 mm Insertion height: 555 mm Basket size: 500×500 / 650×500 mm Performance Program cycles*: 60 / 90 / 210 sec. Theoretical basket capacity: 60 / 40 / 17 per hour Pump motor: 1.5 kW Tank capacity: 26 l Rinse water consumption: 3.2 l/basket Tank heating: 2.0 kW Built-in boiler Inlet temperature 10°C: 9 kW Inlet temperature 45°-60°C: 7.5 kW Total connected load Three-phase 3NPE 400 V~ 50 Hz, 10°C inlet temp.: 12.6 kW Three-phase 3NPE 400 V~ 50 Hz, 45°-60°C inlet temp.: 11.1 kW Protection class IPX5 * With connection to cold water and/or short basket change intervals, program durations may increase to achieve hygienic rinse temperatures! 1 year warranty on electronic parts with proper installation! Insured shipment by freight carrier available upon providing your delivery address and on-site contact person (including phone notification).

Year of construction: 2007, condition: excellent (used), I sell the double end cutting and tenoning machine FRIULMAC IDRAMAT, Year 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting saw aggregates / 3,0 + 3,0 KW 1 + 1 pcs. grooving saw aggregates front + back Fedpfsib A E Asx Afujgh Configuration right side / moving: 1 + 1 pcs. cutting saw aggregates / 3,0 + 3,0 KW 1 pc. special milling aggregate / 5,5 KW Material pressure feeding band from top Special construction, suitable also for sizing. Throughfeed machine. Siemens Simantic control panel. Very good condition. Available immediately.

Condition: used, Year of construction: 2023, power: 4 kW (5.44 HP), intake manifold diameter: 250 mm, Used extraction system with 4 kW power, in very good condition and inspected by the manufacturer. All filters have been replaced. Fsdjxw Ik Aopfx Afuogh

Condition: excellent (used), SIZING-TENONING LINE, composed of the following machines: A) Loader (portal/bridge) double pick-up station "SAG" CAR MS 2000 with central motorized rollers conveyor and 2 external on-ground roller ways to in-feed the piles (stacks) of panels to the Loader. Fgedpfezzzupex Afuoh B) 1st Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 C) Turning Station "SAG" Mod. Girapannelli (from lengthwise to crosswise) with double cone system. D) 2nd Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 E) Turning Station "SAG" Mod. Girapannelli, (from lengthwise to crosswise) with double cone system. F) 3rd Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 H) Stacker (portal/bridge) double stacking station "SAG" CAR/S MS 2000 with central motorized rollers conveyor and 2 external on-ground roller ways to out-feed the piles (stacks) of panels from the Stacker

Condition: used, Gulmay CP225-1/29 X-Ray Device – Radiographic Irradiation Unit Maximum Power: 3200 W kV Range: 20 – 225 kV kV Accuracy: ± 1% of set value kV Reproducibility: Better than ± 0.05 kV High Voltage Ripple: Less than 5.0 V/mA with 10M high-voltage cable Fgsdpsy Akczjfx Afuoh mA Range: 0 – 30 mA mA Accuracy: ± 0.5% of set value mA Reproducibility: Better than 2 μA Input Voltage: 220 V ±10% 47 – 63 Hz Input Current: 27 A at 220 V Output Connector: R30 Cathode Dimensions (W x H x D): 435 x 780 x 818 mm Storage Temperature: -40°C to +70°C Operating Temperature: 0°C to +40°C Relative Humidity: 95% Duty Cycle: 100% Comms: Analog / RS232 / RS422 You are welcome to arrange an appointment for viewing. We are happy to organize low-cost shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is available. Sale subject to prior sale. Visit our shop and see our other offerings. The stated company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical specifications or errors in the item description may occur and are subject to change.

Condition: used, machine/vehicle number: 008379, Squaring: First and Second Pass Fjdpozvwp Eofx Afujgh Max Panel Thickness: 35 mm Max feed speed: 30 m/min Distance between dogs: 320 mm

Condition: good (used), Year of construction: 2000, machine/vehicle number: 8073, Offer 25432 Technical specifications: - Swing diameter: 320 mm - Distance between centers: 750 mm - Maximum turning diameter over bed: 550 mm Fgjdpfx Asxx Sp Esfush - Maximum turning diameter over cross slide: 175 mm - Spindle bore: 32 mm - Spindle mount: - Tailstock quill taper: MT 3 - Quill stroke: 180 mm - 18 spindle speeds: 85 - 2000 rpm - Longitudinal and cross feeds - Metric thread pitches - Imperial thread pitches - Module threads - Diametral pitch threads - Quick-change tool post - Chuck - Steady rest - Drive: 400 V / 2.2 kW - Required space (approx.): W 2100 x D 750 x H 1300 mm - Weight (approx.): 750 kg

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Fjdpfxet Amc Io Afuogh

Condition: excellent (used), Year of construction: 2015, Conveyor belt Dimensions 2400 x 90 mm Fsdpfox Sq Ehjx Afuogh

Condition: used, turning diameter over bed 430 mm turning diameter over slide rest 220 mm turning diameter in the gap . mm turning length . mm turning speeds 12,5-1600 U/min bed width 410 mm 3-jaw chuck 250 mm spindle passage 550 mm centre distance 750 mm weight of the machine ca. 2 t No. 65 Fjdpfeyx Ipkox Afusgh The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), A conventional universal lathe Bulmak with gap bed (gap-bed lathe) is available. Center height: 210mm, turning diameter over bed/cross slide/in gap: 440mm/230mm/620mm, distance between centers: 1000mm, spindle speed: 2000rpm, bed width: 360mm, travel X/Z: 250mm/130mm. Machine dimensions X/Y/Z: approx. 3100mm/1300mm/1400mm, weight: approx. 2500kg. The machine is partially defective. On-site inspection is possible. Fgodpfeycwr Iex Afuoh

Condition: new, Year of construction: 2022, functionality: fully functional, Brand New Friulmac EQ 004 2.5 with feeding belt and a feeding hopper Touch-Screen Operation and automatic adjustment Working length - min 190mm - max 2500mm width - min 30mm - max 250mm thickness - min 12mm - max 35mm Speed - 6 - 25m/min Fgsdpfx Ajvupm Defuoh 2 x 2 Hoger - 3kW - 720 rpm Main Profiling Head - 4kW - 7200 rpm For more information I can send you the original documentation

Condition: used, We are selling a used extraction unit, model IES 20-35-4 / 11MD, manufactured by Ulmatec. The drive power is 11 kW. Fgsdpfxoxxxwcj Afujh If you have any further questions, please feel free to contact us!

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: three-phase, total width: 1,600 mm, total length: 1,300 mm, total height: 1,600 mm, overall weight: 530 kg, power of the servo motor: 1,000 W, hopper volume: 150 l, input voltage: 400 V, BIG-BAG UNLOADING SYSTEM Dedicated for clean unloading of big-bags and dosing into production line. Suitable for chemicals, ingredients and other bulk and/or dusty materials. Used when it is necessary to meet high hygiene requirements when working with incompatible or allergenic raw materials or components. - Made of stainless steel AISI304 (framing) and AISI316 (parts in contact with product), CE and FDA certified - Maximum big bag load 1500kg - Preinstalled connection for dust extraction - Discharging station on weighs, the real time monitoring and control of weight unloaded - Full process and data control via Touch screen HMI - Bag agitation Fjdpfey I U S Dex Afujgh - Lower hopper vibration - Product collection hopper with level sensor - Slowing down and stopping the unloading process at any time - Clamping the sleeve of an incompletely unloaded bag for tying - Easy access for disassembly, cleaning and disinfection - Integrated safety circuit Can be equipped with a lower mechanical shutter or with an easily removable screw conveyor

Condition: used, SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. DUALFEED - CE RULES - Min / max working length 260/1300 mm - Min / max working width 40/110 mm - Min / max working thickness 10/80 mm - Productivity : 0-55 psc / min Fgsdjwr Ugpepfx Afush - Diam. Blades 400 mm

Condition: used, L + Z Lathe ZMM - SLIVEN (Bulmak - Bulgaria) Type CU 325 Fodpfxovt U Tme Afuogh Machine No.: 8169 Year of manufacture: 2002 Centre distance: 1000 mm Swing over bed: 320 mm Centre height over bed: 160 mm Swing over cross slide: 190 mm Centre height over cross slide: 95 mm Spindle bore: 32 mm Spindle speeds (forward): 85 - 2000 rpm, 12 steps Spindle speeds (reverse): 130 - 1300 rpm, 6 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55027 size 5 Tailstock quill taper: MT 3 Drive power: 2.2 kW Power supply: 400 Volt, 50 Hz - 3-axis digital readout RSF, type Z 730 - Spindle speed adjustable in machining direction via 12 gearbox steps - Spindle speed adjustable in counter direction via 6 gearbox steps - 3-jaw chuck BISON Ø 160 mm with 1 set of stepped jaws - 4-way universal tool post - Coolant tank with pump integrated in machine base - Spindle brake operated via direction lever - Emergency stop via foot pedal and emergency switch - Foldable chuck guard - Machine lamp - Splash guard - Travelling steady rest - Quick-change drill chuck with MT 3 taper - Multiple change gears - Operating manual with electrical diagram Installation dimensions (L x W x H): 2100 x 800 x 1600 mm Weight: 750 kg Good condition

Condition: used, machine/vehicle number: 1656, SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 Fgjdpjqmpnlefx Afuoh - Min/max working length 250/1300 mm - Max working width 160 mm - Min/max working thickness 10/80 mm - Production capacity : 0-50 psc / min - Diam. Blades 400 mm - S/N 1656

Year of construction: 2025, condition: new, - With integrated extraction and pneumatic cleaning. Fgedpoxzt Uhefx Afujh - Various worktops available! (wood, grating, perforated plate) - Mobile with swivel castors - Plug-and-play ready