Used Unbekannt Dn100 for sale (3,169)

Condition: good (used), Chiller, cooling water circuit, heat exchanger, cooling for spot welding machine, refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit, coolant pump -Refrigeration compressor: cooling unit Cooling 7 -Type: FK 7 -Cooling capacity: 1.6 kW -Volume flow rate: 5.2 l/min -Dimensions: 570/360/H260 mm Tedpfxozr Hcms Anteb -Weight: 22.7 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Todpjzr Hlzefx Antob -Punching tool: Gill tool, notching die for profile steel shears, flat steel shears -Dimensions: see photos -Dimensions: Die 240/90/H125 mm / Punch 200/85/H170 mm -Weight: 33.9 kg

Condition: used, power capacity / kW volt / V ampere / A Tsdpfxsy Suwze Antsb MOTOR TFC 132M-4 9kW Condition: used (functional)

Condition: ready for operation (used), Motorized tool holder SK40 / SK50 from Zoller machine 6084 / H4000, used, in good condition, 100% functional, scope of delivery as shown in the photos. Todpeztmkgefx Antob

Condition: ready for operation (used), Control panel circuit board NMT01 44216-720.01 for lid milling machine Condition: Ready for use / functional Tjdey Suvdepfx Antsb

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: for profile steel shears, flat steel shears, 2 pieces -Hole spacing: 135 x Ø17 mm -Dimensions: see photos -Submission/Price: complete Tedpfxezr Hlno Antob -Dimensions each: 175/107/H125 mm -Weight: 6.1 kg/pc.

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, total width: 580 mm, total height: 280 mm, total length: 5,000 mm, conveying length: 5,000 mm, construction width: 580 mm, power: 0.19 kW (0.26 HP), axle spacing: 60 mm, TAF article number: 1000003831 Overall dimensions: approx. 5,000 x 580 x 280 mm (LxWxH) Width incl. side: 580 mm Side panel height: 100 mm Width incl. drive: 580 mm Conveyor length: 5,000 mm Conveyor width: 500 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 60 mm Roller diameter: 50 mm Drive type: Flat belt Motor: Gear motor Motor data: SEW, 0.25 kw, 50 Hz, 220-240 Volt Conveying speed: max. 0.19 m/s, constant Special features: CEE plug Condition: Used / fully functional Function test: OK Tjdpfetizbtex Antob

Condition: used, amount 1 Palette Wooden crate containing a variety of metal parts. These include: -> Precision steel blocks -> Mold inserts / dies -> Semicircular segments / clamping jaws -> Spacers / fitting pieces -> Clamping and jig parts -> Cylindrical and cross-section profiles Complete package price Tsdpfxozg Nk Ao Antjb

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing Tjdezw E I Ejpfx Antob -Overall dimensions: 135/90/H75 mm -Total weight: 4.3 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Overall dimensions: 180/135/H85 mm Tsdpfx Aszw E Ilsnteb -Total weight: 10.1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/105/H65 mm -Total weight: 4.1 kg Tedpfx Anjzw E Ixetsb

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Tedpfx Aozw E I Ssntsb -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/105/H67 mm -Total weight: 3.7 kg

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1500 mm plate height: 450 mm weight of the machine ca.: 5,9 t transport dimensions LxWxH: 4,0 x 1,5 x 0,45 m 3 units available – price per unit T-slot clamping plate Dimensions: 4000 × 1500 × 450 mm ·6 T-slots ·Heavy-duty design for machine setup, fixture construction and precision machining Tedpoy Rru Isfx Antsb ·Ideal for milling, drilling and assembly applications *

Condition: good (used), Round brush, grinding wheel, chip brush, wire brush -Round brush: Steel wire brush, 268 pieces Tjdszualgopfx Antjb -Outer diameter: 100 mm -Width: 22 mm -Bore diameter: 27 mm -Submission/Price: complete -Weight: 0.2 kg/piece

Condition: ready for operation (used), Transroll spindle L = 1255 mm, Ø thread: 32 mm, pitch: 10 mm, Ø pin: 20 mm with bearing Ø 42 mm, Ø shaft: 32 / 25 mm, length shaft: 420 mm, Ø ball cage: 74 mm, Ø flange: 96 x 94 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos Tsdpfx Aszu Hirentob

Condition: used, length 1000 mm width 1000 mm height 800 mm weight of the machine ca. / t Clamping cube 1000x1000x800 mm Edge distance: 110 mm T-slot spacing: 180 mm Slot size: 34 mm Thickness: 115 mm Number of slots: 9 Tsdpezk Riuofx Anteb 2 units available

Condition: good (used), Offer 25178 Technical Data: Todpfx Aowu T H Tsnteb - Table surface area approx.: 1200 x 800 mm - Hole diameter: 28 mm - Hole spacing: 100 mm - Table height: 880 mm - Lighting - Power strip - Pneumatic connection - Space requirement approx.: W 1400 x H 2400 x D 1100 mm - Weight approx.: 150 kg

Condition: good (used), Containers, transport containers, steel containers, ISO containers, material containers, workshop containers, shipping containers -Steel container: Workshop container / material container with lighting and workshop equipment -Workbench: with vise -Double grinding machine: -Electrical equipment: see photos Tsdpfxjzh Eg Ne Antob -Container interior dimensions: 5940/2330/H2285 mm -Transport dimensions: 6050/2420/H2590 mm -Transport weight: 2800 kg

Condition: ready for operation (used), Switch Testing Device - 3x test stations for appliance switch testing - Voltage: 0–600V AC / DC - Current rating: max. 40A - Operation of test switches via pneumatic cylinders - Testing with resistive and inductive loads according to EN 61058 (VDE 0630) - 1x thermal chamber (oven) for testing at ambient temperatures up to 125°C - Testing of appliance switches with rated data 250Vac / 16(4)A / 125°C Buyer responsible for disassembly! Tedpfxsx I Ef Us Antjb

Condition: used, weight / kg taper MK / Tedovcd N Aspfx Antob Set of 3 clamping blocks with T-slots Length: 1000mm Width: 80mm Height: 160mm T-slot size: 32 x 18 T-slot height: 32mm Clamping plate – clamping block – clamping table – clamping arm – T-slot plate

Condition: ready for operation (used), Type: NDZ .00 Tedpfoy Suvqsx Antob

Condition: used, Year of construction: 1988, bore capacity in steel (diameter) 50 mm arm length / mm workpiece height max. / mm Tsdewt Dwaopfx Anteb Table dimensions: 1200x580mmTable dimensions: 1200x580mm

Condition: ready for operation (used), Transroll spindle L = 875 mm from Studer S60 adjustment range: 570 mm, Ø 63 mm, pitch: 5 mm, Ø ball cage: 90 mm, Ø mounting flange: 125 mm, Ø pin: 30/40 mm, Ø pin thread: 40 mm, used, normal signs of wear, 100% functional Tedpfx Anjzu Hi Sjtjb

Condition: ready for operation (used), Transroll spindle L = 1110 mm , Ø thread: 40 mm, pitch: 6 mm, Ø journal: 22 mm, Ø shaft: 30 mm, length shaft: 95 mm , Ø ball cage: 63 mm , Ø flange: 87 mm ,used, normal signs of wear, 100% functional, scope of delivery as per photos Tsdozu Hilspfx Anteb

Condition: ready for operation (used), Transroll spindle L = 1615 mm, Ø thread: 40 mm, pitch: 12 mm, Ø pin: 30 / 35 mm, length pin: 135 mm, Ø shaft: 35 / 40 mm, length shaft: 120 mm, Ø ball cage: 70 mm, dimensions flange: 85 x 110 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos Todpfx Anszu Hixstsb