Used Usm Haller Desk Lectern for sale (271)

Condition: new, Year of construction: 2026, PLUSMIX PLUS ST 130 130 m³/h FIXED BATCHING PLANT 4x30 AGGREGATE BUNKER 1000x24000 mm TRANSFER BELT 4500/3000 3 m³ TWIN SHAFT MIXER & AUTOMATIC LUBRICATION TOP WEIGHING GROUPS AUTOMATION SYSTEMS & SCADA CONTROL CABIN AIR COMPRESSOR AND FITTINGS Hjdpfxow Swa Ds Ab Nenl

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 24559, pressing force: 34 t, total width: 2,400 mm, total length: 6,500 mm, total height: 2,400 mm, overall weight: 4,635 kg, filling opening length: 1,000 mm, filling opening width: 1,900 mm, power: 5.5 kW (7.48 HP), Neat press container Husmann SPB20SEN Lifting tilting system for 660 liter roll containers Lifting tilting system raised for 1,200 mm high platform Hsdpfewcdrcox Ab Nenl Unloading flap

Condition: used, Year of construction: 2015, operating hours: 1,661 h, Manufacturer: Husmann Typ: SPB 20 SEL-E Volume: 20m3 Build in: 2015 Backdoor: bovenscharnierend Hjdpfxewca Aqo Ab Nenl

Condition: used, Year of construction: 2015, operating hours: 1,587 h, Manufacturer: Husmann Typ: SPB 20 SEL-E Volume: 20m3 Build in: 2015 Backdoor: top hingend Hnedewcaztopfx Ab Nol

Year of construction: 1999, condition: good (used), Nail lenght range - 50 - 90mm Hnedpfx Absdmbp Us Njl Speed - 100 nails/sec. ( frequency regulator ) Management - PLC Simens S5

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Hodpjwg Sd Usfx Ab Njnl Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Hodpfewg R Rtsx Ab Nonl

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Hnodpowg Sgcefx Ab Nel

Condition: ready for operation (used), Year of construction: 2021, overall weight: 97 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, number of axes: 3, This 3-axis DESKTOP METAL Metal Studio 2 was manufactured in 2021. It utilizes Bound Metal Deposition technology and features a build volume of 300 x 200 x 200 mm. The machine supports various materials, including 316L and H13 Tool Steel, and operates with a dual extruder system. If you are looking to get high-quality metal 3D printing capabilities, consider the DESKTOP METAL Metal Studio 2 machine we have for sale. Contact us for further details. • Technology: Bound Metal Deposition (BMD) • Process: 2-step (printing and sintering – no debinder needed) • Build volume: 300 x 200 x 200 mm • Layer height: 50 µm to 250 µm • Build plate: Heated up to 120°C (vacuum-adhered) • Extruders: Dual (metal and ceramic support) • Support interface: Ceramic release layer (manual breakaway) • Materials: 316L, 17-4 PH, 4140, H13 tool steel, copper • Software: Fabricate (automated scaling and sintering profiles) • Connectivity: WiFi / Ethernet Additional equipment Hodpfsyuyz Nsx Ab Nonl • Furnace: Max temperature 1400°C; atmosphere: partial pressure Synthogas (Ar/H2); sintering cycle: 16–24 hours

Condition: used, Year of construction: 2009, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, Press container Husmann, with big feeding opening Hnsdpfx Abowampfj Nel

Year of construction: 2009, condition: like new (used), Press with container Engine 5,5 kW 400 V Hodpfefhb Tijx Ab Nonl

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. Hnedpfxsp R Iwhs Ab Nsl About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Hsdpfx Aeiv R Hheb Njnl Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angle: -45° to +45° Capacity: Up to 10 boards per minute Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: new, Year of construction: 2026, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Lengths: 450 - 6000+ mm Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Hjdpfxef Hkgpj Ab Nenl Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 22207, Marinus Machines V&G 400 Series,Through Feed End Matching Machine,Serial Number 22207, Year of Manufacture 2000 In very good working condition. Maximum working length up to 6m, minimum working length: 500m/m Minimum working width: 50m/m, normal maximum width: 280m/m, 300m/m is possible with some adjustment of the tools. Total Power: Appr: 20kw, Feed Speed up to 20 pieces per minute,depending on length. Omron PLC Controls. Floor Size: W x D x H 2000 x 1650 x 1900m/m, Weight: Appr. 1750kg. Also with the machine is a 3m. Long Belt Conveyor, which could be used at the Infeed or Outfeed of the machine. Complete Safety Enclosure. Hnjdpfx Absv Er Nis Njl With Operational & Electrical Manual. Location: Can be viewed in Burrowbridge,Somerset TA7 0SG Photos Available on your email or Mobile Phone WhatsApp.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Hjdpfx Abjk Hz Nqo Njnl Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: like new (used), UNDER CONSTRUCTION Hedpjw Uc T Ujfx Ab Nsnl We are currently in the final stages of a complete overhaul of a fully automatic stationary press. This stationary press is including 2 containers 30m3 equipped with side door Build in: RV 2025 Overhaul work we have carried out: -new floor -new side panel -new guide blocks and guide plates - pressblock overhauled -cylinders fitted with new sleeves -new fork pins -new return filter -new hydraulic hoses -oil renewed

Condition: like new (used), Year of construction: 2022, functionality: fully functional, The machine is a few years old, but has rarely been used. It can be inspected at our location in Weesp. Hnjdpfx Asxg Hxwob Nel

Condition: used, Year of construction: 2000, functionality: fully functional, pressing force: 70 t, For sale: a fully functional and well-maintained Husmann MP6070-TS waste compactor installation, currently still in daily operation. The installation is immediately ready for use and is particularly suitable for compacting and transferring various waste streams. Features: - Fully operational and functional installation - In daily use and well maintained - Includes two swap bodies for moving containers - Equipped with hydraulic container couplings and a hydraulic container locking system - Features a large feed hopper - Can be easily filled with a wheel loader, excavator, or from a platform/ramp Hedsxuhtrspfx Ab Njnl - Immediately available for use Containers are not included.

Condition: used, Year of construction: 2006, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: CM 150-001, For Sale: Columbus McKinnon Barclay Tire Shredder Looking for a powerful and reliable machine to downsize tires? Then this Columbus McKinnon Barclay tire shredder is exactly what you need. Specifications: • ✅ Model: CM Barclay • ✅ Application: Reduces tire size • ✅ Shredding chamber width: 150 cm • ✅ Motor: Flender motor   o Power: 37 kW   o Speed: 1470 rpm Usage & Maintenance History: • In use: from 2006 to 2011 • Very little use: between 2016 and 2022 • Completely overhauled in 2016, including:   o New shafts   o New bearings Hsdjxc Envepfx Ab Nenl   o New blades   o New scrapers Why choose this shredder? The Barclay shredder is renowned for its durability and efficiency in processing tires. Thanks to the complete overhaul in 2016 and minimal usage since then, the machine remains in excellent condition and is ready for immediate operation.

Condition: good (used), functionality: fully functional, roll diameter: 80 mm, total width: 1,250 mm, total length: 40,750 mm, conveying length: 40,750 mm, power: 1.1 kW (1.50 HP), roll spacing: 160 mm, axle spacing: 160 mm, frame height: 185 mm, frame width: 85 mm, Pallet roller conveyor/roller conveyor/pallet conveyor technology Manufacturer: Claus Maschinenbau Condition: Used Drive type: Chain drive System consists of 9 segments 6 x approx. 5.75 meters long 1 x approx. 5.30 meters long 1 x approx. 2.00 meters long 1 x approx. 0.95 meters long Each element is equipped with its own motor. Total length: approx. 40.75 meters Total width including motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveyor width: approx. 820 mm Roller diameter: approx. 80 mm Axles/axle spacing: approx. 160 mm Frame width: approx. 85 mm Frame height: approx. 185 mm Color: Blue Includes pallet guide Includes SEW motor (1.1 kW) Includes feet (height-adjustable) The conveyor system was in operation until dismantled. Condition: fully functional, with signs of wear Ideal for fast material transport Professionally dismantled and packaged Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods! We would be happy to provide you with a customized quote or advise you on design or installation issues. Simply let us know your requirements and local conditions. Hnjdstrv Anopfx Ab Njl Take advantage of our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, and the electronics sector. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or additional components such as picking racks or containers.

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Hodpfx Ajfhb Tkjb Nsnl

Condition: new, Year of construction: 2026, CE certificated Concrete Plants 24/7 customer support and aftersales services FREE OF CHARGE ASSEMBLY & TRAINING. GENERAL TECHNICAL SPECIFICATIONS Hsdpfegxqnlox Ab Nenl Plant type: Mobile concrete plant with an Horizontal shaft mixer Plant Capacity : 60m³ / hour compressed fresh concrete Mixer Capacity : 1000 Liter (1m³ Compressed Concrete) Mixer Type : Single Shaft Mixer Electronical equipment : Siemens Other equipment & accessories : Italian Automatic lubrification system (ILC : ITALIAN) Laptop (with software package), printer, uninterruptible power supply and SCADA software package, all control and monitoring processes, all kinds of reporting, failure notifications, etc. This process is done on the computer screen and with animation support. FOR MORE INFORMATION PLEASE CONTACT US NOW Whatsapp / Viber

Condition: new, Year of construction: 2026, HIGH RANGE TECHNOLOGY AT THE LOWEST PRICE IN THE MATKETPLACE, DON'T MISS THE CHANCE. CUSTOMER SATISFACTION IS OUR MAIN TARGET CE certificated Concrete Plants 24/7 customer support and aftersales services FREE OF CHARGE ASSEMBLY & TRAINING. GENERAL TECHNICAL SPECIFICATIONS Plant type: Mobile concrete plant with Bunker Feeding and Horizontal shaft mixer Plant Capacity : 120m³ / hour compressed fresh concrete Mixer Capacity : 3000 Liter (3m³ Compressed Concrete) Mixer Type : Double Shaft Mixer Hnedpew Sv Ndjfx Ab Nol Total Motor Power : 180 kw Standard Value. It may vary depending on the equipment. Voltage / frequency : 380V / 50Hz Standard Value Electronical equipment : Siemens Other equipment & accessories : Italy / Germany Automatic lubrication system (ILC : ITALIAN) ALL IN ONE (with software package), printer, uninterruptible power supply and SCADA software package, all control and monitoring processes, all kinds of reporting, failure notifications, etc. This process is done on the computer screen and with animation support. FOR MORE INFORMATION PLEASE CONTACT US NOW Whatsapp / Viber

Condition: new, Year of construction: 2026, HIGH RANGE TECHNOLOGY AT THE LOWEST PRICE IN THE MATKETPLACE, DON'T MISS THE CHANCE. CUSTOMER SATISFACTION IS OUR MAIN TARGET CE certificated Concrete Plants 24/7 customer support and aftersales services FREE OF CHARGE ASSEMBLY & TRAINING. GENERAL TECHNICAL SPECIFICATIONS Plant type: Mobile concrete plant with Bunker Feeding and Horizontal shaft mixer Plant Capacity : 100m³ / hour compressed fresh concrete Mixer Capacity : 2000 Liter (2m³ Compressed Concrete) Mixer Type : Double or Single Shaft Mixer Hnedpfxjgxmurj Ab Nsl Total Motor Power : 110 kw Standard Value. It may vary depending on the equipment. Voltage / frequency : 380V / 50Hz Standard Value Electronical equipment : Siemens Other equipment & accessories : Italy / Germany Automatic lubrication system (ILC : ITALIAN) ALL IN ONE (with software package), printer, uninterruptible power supply and SCADA software package, all control and monitoring processes, all kinds of reporting, failure notifications, etc. This process is done on the computer screen and with animation support. FOR MORE INFORMATION PLEASE CONTACT US NOW Whatsapp / Viber